Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-01-16 10:17:32 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux-stable/include/linux/scatterlist.h
Michael Kelley 7296f2301a swiotlb: reduce swiotlb pool lookups 
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:

dma_direct_map_page:
 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce

dma_direct_unmap_page:
 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
	swiotlb_bounce
 4. is_swiotlb_buffer
 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots

Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.

There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.

Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:

 * swiotlb_find_pool() becomes __swiotlb_find_pool()
 * is_swiotlb_buffer() becomes swiotlb_find_pool()
 * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()

With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):

dma_direct_unmap_page:
 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool

These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.

No functional change is intended.

Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-07-10 07:59:03 +02:00

696 lines
21 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_SCATTERLIST_H
#define _LINUX_SCATTERLIST_H
#include <linux/string.h>
#include <linux/types.h>
#include <linux/bug.h>
#include <linux/mm.h>
#include <asm/io.h>
struct scatterlist {
unsigned long page_link;
unsigned int offset;
unsigned int length;
dma_addr_t dma_address;
#ifdef CONFIG_NEED_SG_DMA_LENGTH
unsigned int dma_length;
#endif
#ifdef CONFIG_NEED_SG_DMA_FLAGS
unsigned int dma_flags;
#endif
};
/*
* These macros should be used after a dma_map_sg call has been done
* to get bus addresses of each of the SG entries and their lengths.
* You should only work with the number of sg entries dma_map_sg
* returns, or alternatively stop on the first sg_dma_len(sg) which
* is 0.
*/
#define sg_dma_address(sg) ((sg)->dma_address)
#ifdef CONFIG_NEED_SG_DMA_LENGTH
#define sg_dma_len(sg) ((sg)->dma_length)
#else
#define sg_dma_len(sg) ((sg)->length)
#endif
struct sg_table {
struct scatterlist *sgl; /* the list */
unsigned int nents; /* number of mapped entries */
unsigned int orig_nents; /* original size of list */
};
struct sg_append_table {
struct sg_table sgt; /* The scatter list table */
struct scatterlist *prv; /* last populated sge in the table */
unsigned int total_nents; /* Total entries in the table */
};
/*
* Notes on SG table design.
*
* We use the unsigned long page_link field in the scatterlist struct to place
* the page pointer AND encode information about the sg table as well. The two
* lower bits are reserved for this information.
*
* If bit 0 is set, then the page_link contains a pointer to the next sg
* table list. Otherwise the next entry is at sg + 1.
*
* If bit 1 is set, then this sg entry is the last element in a list.
*
* See sg_next().
*
*/
#define SG_CHAIN 0x01UL
#define SG_END 0x02UL
/*
* We overload the LSB of the page pointer to indicate whether it's
* a valid sg entry, or whether it points to the start of a new scatterlist.
* Those low bits are there for everyone! (thanks mason :-)
*/
#define SG_PAGE_LINK_MASK (SG_CHAIN | SG_END)
static inline unsigned int __sg_flags(struct scatterlist *sg)
{
return sg->page_link & SG_PAGE_LINK_MASK;
}
static inline struct scatterlist *sg_chain_ptr(struct scatterlist *sg)
{
return (struct scatterlist *)(sg->page_link & ~SG_PAGE_LINK_MASK);
}
static inline bool sg_is_chain(struct scatterlist *sg)
{
return __sg_flags(sg) & SG_CHAIN;
}
static inline bool sg_is_last(struct scatterlist *sg)
{
return __sg_flags(sg) & SG_END;
}
/**
* sg_assign_page - Assign a given page to an SG entry
* @sg: SG entry
* @page: The page
*
* Description:
* Assign page to sg entry. Also see sg_set_page(), the most commonly used
* variant.
*
**/
static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
{
unsigned long page_link = sg->page_link & (SG_CHAIN | SG_END);
/*
* In order for the low bit stealing approach to work, pages
* must be aligned at a 32-bit boundary as a minimum.
*/
BUG_ON((unsigned long)page & SG_PAGE_LINK_MASK);
#ifdef CONFIG_DEBUG_SG
BUG_ON(sg_is_chain(sg));
#endif
sg->page_link = page_link | (unsigned long) page;
}
/**
* sg_set_page - Set sg entry to point at given page
* @sg: SG entry
* @page: The page
* @len: Length of data
* @offset: Offset into page
*
* Description:
* Use this function to set an sg entry pointing at a page, never assign
* the page directly. We encode sg table information in the lower bits
* of the page pointer. See sg_page() for looking up the page belonging
* to an sg entry.
*
**/
static inline void sg_set_page(struct scatterlist *sg, struct page *page,
unsigned int len, unsigned int offset)
{
sg_assign_page(sg, page);
sg->offset = offset;
sg->length = len;
}
/**
* sg_set_folio - Set sg entry to point at given folio
* @sg: SG entry
* @folio: The folio
* @len: Length of data
* @offset: Offset into folio
*
* Description:
* Use this function to set an sg entry pointing at a folio, never assign
* the folio directly. We encode sg table information in the lower bits
* of the folio pointer. See sg_page() for looking up the page belonging
* to an sg entry.
*
**/
static inline void sg_set_folio(struct scatterlist *sg, struct folio *folio,
size_t len, size_t offset)
{
WARN_ON_ONCE(len > UINT_MAX);
WARN_ON_ONCE(offset > UINT_MAX);
sg_assign_page(sg, &folio->page);
sg->offset = offset;
sg->length = len;
}
static inline struct page *sg_page(struct scatterlist *sg)
{
#ifdef CONFIG_DEBUG_SG
BUG_ON(sg_is_chain(sg));
#endif
return (struct page *)((sg)->page_link & ~SG_PAGE_LINK_MASK);
}
/**
* sg_set_buf - Set sg entry to point at given data
* @sg: SG entry
* @buf: Data
* @buflen: Data length
*
**/
static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
unsigned int buflen)
{
#ifdef CONFIG_DEBUG_SG
BUG_ON(!virt_addr_valid(buf));
#endif
sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
}
/*
* Loop over each sg element, following the pointer to a new list if necessary
*/
#define for_each_sg(sglist, sg, nr, __i) \
for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg))
/*
* Loop over each sg element in the given sg_table object.
*/
#define for_each_sgtable_sg(sgt, sg, i) \
for_each_sg((sgt)->sgl, sg, (sgt)->orig_nents, i)
/*
* Loop over each sg element in the given *DMA mapped* sg_table object.
* Please use sg_dma_address(sg) and sg_dma_len(sg) to extract DMA addresses
* of the each element.
*/
#define for_each_sgtable_dma_sg(sgt, sg, i) \
for_each_sg((sgt)->sgl, sg, (sgt)->nents, i)
static inline void __sg_chain(struct scatterlist *chain_sg,
struct scatterlist *sgl)
{
/*
* offset and length are unused for chain entry. Clear them.
*/
chain_sg->offset = 0;
chain_sg->length = 0;
/*
* Set lowest bit to indicate a link pointer, and make sure to clear
* the termination bit if it happens to be set.
*/
chain_sg->page_link = ((unsigned long) sgl | SG_CHAIN) & ~SG_END;
}
/**
* sg_chain - Chain two sglists together
* @prv: First scatterlist
* @prv_nents: Number of entries in prv
* @sgl: Second scatterlist
*
* Description:
* Links @prv@ and @sgl@ together, to form a longer scatterlist.
*
**/
static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents,
struct scatterlist *sgl)
{
__sg_chain(&prv[prv_nents - 1], sgl);
}
/**
* sg_mark_end - Mark the end of the scatterlist
* @sg: SG entryScatterlist
*
* Description:
* Marks the passed in sg entry as the termination point for the sg
* table. A call to sg_next() on this entry will return NULL.
*
**/
static inline void sg_mark_end(struct scatterlist *sg)
{
/*
* Set termination bit, clear potential chain bit
*/
sg->page_link |= SG_END;
sg->page_link &= ~SG_CHAIN;
}
/**
* sg_unmark_end - Undo setting the end of the scatterlist
* @sg: SG entryScatterlist
*
* Description:
* Removes the termination marker from the given entry of the scatterlist.
*
**/
static inline void sg_unmark_end(struct scatterlist *sg)
{
sg->page_link &= ~SG_END;
}
/*
* One 64-bit architectures there is a 4-byte padding in struct scatterlist
* (assuming also CONFIG_NEED_SG_DMA_LENGTH is set). Use this padding for DMA
* flags bits to indicate when a specific dma address is a bus address or the
* buffer may have been bounced via SWIOTLB.
*/
#ifdef CONFIG_NEED_SG_DMA_FLAGS
#define SG_DMA_BUS_ADDRESS (1 << 0)
#define SG_DMA_SWIOTLB (1 << 1)
/**
* sg_dma_is_bus_address - Return whether a given segment was marked
* as a bus address
* @sg: SG entry
*
* Description:
* Returns true if sg_dma_mark_bus_address() has been called on
* this segment.
**/
static inline bool sg_dma_is_bus_address(struct scatterlist *sg)
{
return sg->dma_flags & SG_DMA_BUS_ADDRESS;
}
/**
* sg_dma_mark_bus_address - Mark the scatterlist entry as a bus address
* @sg: SG entry
*
* Description:
* Marks the passed in sg entry to indicate that the dma_address is
* a bus address and doesn't need to be unmapped. This should only be
* used by dma_map_sg() implementations to mark bus addresses
* so they can be properly cleaned up in dma_unmap_sg().
**/
static inline void sg_dma_mark_bus_address(struct scatterlist *sg)
{
sg->dma_flags |= SG_DMA_BUS_ADDRESS;
}
/**
* sg_unmark_bus_address - Unmark the scatterlist entry as a bus address
* @sg: SG entry
*
* Description:
* Clears the bus address mark.
**/
static inline void sg_dma_unmark_bus_address(struct scatterlist *sg)
{
sg->dma_flags &= ~SG_DMA_BUS_ADDRESS;
}
/**
* sg_dma_is_swiotlb - Return whether the scatterlist was marked for SWIOTLB
* bouncing
* @sg: SG entry
*
* Description:
* Returns true if the scatterlist was marked for SWIOTLB bouncing. Not all
* elements may have been bounced, so the caller would have to check
* individual SG entries with swiotlb_find_pool().
*/
static inline bool sg_dma_is_swiotlb(struct scatterlist *sg)
{
return sg->dma_flags & SG_DMA_SWIOTLB;
}
/**
* sg_dma_mark_swiotlb - Mark the scatterlist for SWIOTLB bouncing
* @sg: SG entry
*
* Description:
* Marks a a scatterlist for SWIOTLB bounce. Not all SG entries may be
* bounced.
*/
static inline void sg_dma_mark_swiotlb(struct scatterlist *sg)
{
sg->dma_flags |= SG_DMA_SWIOTLB;
}
#else
static inline bool sg_dma_is_bus_address(struct scatterlist *sg)
{
return false;
}
static inline void sg_dma_mark_bus_address(struct scatterlist *sg)
{
}
static inline void sg_dma_unmark_bus_address(struct scatterlist *sg)
{
}
static inline bool sg_dma_is_swiotlb(struct scatterlist *sg)
{
return false;
}
static inline void sg_dma_mark_swiotlb(struct scatterlist *sg)
{
}
#endif /* CONFIG_NEED_SG_DMA_FLAGS */
/**
* sg_phys - Return physical address of an sg entry
* @sg: SG entry
*
* Description:
* This calls page_to_phys() on the page in this sg entry, and adds the
* sg offset. The caller must know that it is legal to call page_to_phys()
* on the sg page.
*
**/
static inline dma_addr_t sg_phys(struct scatterlist *sg)
{
return page_to_phys(sg_page(sg)) + sg->offset;
}
/**
* sg_virt - Return virtual address of an sg entry
* @sg: SG entry
*
* Description:
* This calls page_address() on the page in this sg entry, and adds the
* sg offset. The caller must know that the sg page has a valid virtual
* mapping.
*
**/
static inline void *sg_virt(struct scatterlist *sg)
{
return page_address(sg_page(sg)) + sg->offset;
}
/**
* sg_init_marker - Initialize markers in sg table
* @sgl: The SG table
* @nents: Number of entries in table
*
**/
static inline void sg_init_marker(struct scatterlist *sgl,
unsigned int nents)
{
sg_mark_end(&sgl[nents - 1]);
}
int sg_nents(struct scatterlist *sg);
int sg_nents_for_len(struct scatterlist *sg, u64 len);
struct scatterlist *sg_next(struct scatterlist *);
struct scatterlist *sg_last(struct scatterlist *s, unsigned int);
void sg_init_table(struct scatterlist *, unsigned int);
void sg_init_one(struct scatterlist *, const void *, unsigned int);
int sg_split(struct scatterlist *in, const int in_mapped_nents,
const off_t skip, const int nb_splits,
const size_t *split_sizes,
struct scatterlist **out, int *out_mapped_nents,
gfp_t gfp_mask);
typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t);
typedef void (sg_free_fn)(struct scatterlist *, unsigned int);
void __sg_free_table(struct sg_table *, unsigned int, unsigned int,
sg_free_fn *, unsigned int);
void sg_free_table(struct sg_table *);
void sg_free_append_table(struct sg_append_table *sgt);
int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int,
struct scatterlist *, unsigned int, gfp_t, sg_alloc_fn *);
int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);
int sg_alloc_append_table_from_pages(struct sg_append_table *sgt,
struct page **pages, unsigned int n_pages,
unsigned int offset, unsigned long size,
unsigned int max_segment,
unsigned int left_pages, gfp_t gfp_mask);
int sg_alloc_table_from_pages_segment(struct sg_table *sgt, struct page **pages,
unsigned int n_pages, unsigned int offset,
unsigned long size,
unsigned int max_segment, gfp_t gfp_mask);
/**
* sg_alloc_table_from_pages - Allocate and initialize an sg table from
* an array of pages
* @sgt: The sg table header to use
* @pages: Pointer to an array of page pointers
* @n_pages: Number of pages in the pages array
* @offset: Offset from start of the first page to the start of a buffer
* @size: Number of valid bytes in the buffer (after offset)
* @gfp_mask: GFP allocation mask
*
* Description:
* Allocate and initialize an sg table from a list of pages. Contiguous
* ranges of the pages are squashed into a single scatterlist node. A user
* may provide an offset at a start and a size of valid data in a buffer
* specified by the page array. The returned sg table is released by
* sg_free_table.
*
* Returns:
* 0 on success, negative error on failure
*/
static inline int sg_alloc_table_from_pages(struct sg_table *sgt,
struct page **pages,
unsigned int n_pages,
unsigned int offset,
unsigned long size, gfp_t gfp_mask)
{
return sg_alloc_table_from_pages_segment(sgt, pages, n_pages, offset,
size, UINT_MAX, gfp_mask);
}
#ifdef CONFIG_SGL_ALLOC
struct scatterlist *sgl_alloc_order(unsigned long long length,
unsigned int order, bool chainable,
gfp_t gfp, unsigned int *nent_p);
struct scatterlist *sgl_alloc(unsigned long long length, gfp_t gfp,
unsigned int *nent_p);
void sgl_free_n_order(struct scatterlist *sgl, int nents, int order);
void sgl_free_order(struct scatterlist *sgl, int order);
void sgl_free(struct scatterlist *sgl);
#endif /* CONFIG_SGL_ALLOC */
size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
size_t buflen, off_t skip, bool to_buffer);
size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
const void *buf, size_t buflen);
size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
void *buf, size_t buflen);
size_t sg_pcopy_from_buffer(struct scatterlist *sgl, unsigned int nents,
const void *buf, size_t buflen, off_t skip);
size_t sg_pcopy_to_buffer(struct scatterlist *sgl, unsigned int nents,
void *buf, size_t buflen, off_t skip);
size_t sg_zero_buffer(struct scatterlist *sgl, unsigned int nents,
size_t buflen, off_t skip);
/*
* Maximum number of entries that will be allocated in one piece, if
* a list larger than this is required then chaining will be utilized.
*/
#define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist))
/*
* The maximum number of SG segments that we will put inside a
* scatterlist (unless chaining is used). Should ideally fit inside a
* single page, to avoid a higher order allocation. We could define this
* to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The
* minimum value is 32
*/
#define SG_CHUNK_SIZE 128
/*
* Like SG_CHUNK_SIZE, but for archs that have sg chaining. This limit
* is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
*/
#ifdef CONFIG_ARCH_NO_SG_CHAIN
#define SG_MAX_SEGMENTS SG_CHUNK_SIZE
#else
#define SG_MAX_SEGMENTS 2048
#endif
#ifdef CONFIG_SG_POOL
void sg_free_table_chained(struct sg_table *table,
unsigned nents_first_chunk);
int sg_alloc_table_chained(struct sg_table *table, int nents,
struct scatterlist *first_chunk,
unsigned nents_first_chunk);
#endif
/*
* sg page iterator
*
* Iterates over sg entries page-by-page. On each successful iteration, you
* can call sg_page_iter_page(@piter) to get the current page.
* @piter->sg will point to the sg holding this page and @piter->sg_pgoffset to
* the page's page offset within the sg. The iteration will stop either when a
* maximum number of sg entries was reached or a terminating sg
* (sg_last(sg) == true) was reached.
*/
struct sg_page_iter {
struct scatterlist *sg; /* sg holding the page */
unsigned int sg_pgoffset; /* page offset within the sg */
/* these are internal states, keep away */
unsigned int __nents; /* remaining sg entries */
int __pg_advance; /* nr pages to advance at the
* next step */
};
/*
* sg page iterator for DMA addresses
*
* This is the same as sg_page_iter however you can call
* sg_page_iter_dma_address(@dma_iter) to get the page's DMA
* address. sg_page_iter_page() cannot be called on this iterator.
*/
struct sg_dma_page_iter {
struct sg_page_iter base;
};
bool __sg_page_iter_next(struct sg_page_iter *piter);
bool __sg_page_iter_dma_next(struct sg_dma_page_iter *dma_iter);
void __sg_page_iter_start(struct sg_page_iter *piter,
struct scatterlist *sglist, unsigned int nents,
unsigned long pgoffset);
/**
* sg_page_iter_page - get the current page held by the page iterator
* @piter: page iterator holding the page
*/
static inline struct page *sg_page_iter_page(struct sg_page_iter *piter)
{
return nth_page(sg_page(piter->sg), piter->sg_pgoffset);
}
/**
* sg_page_iter_dma_address - get the dma address of the current page held by
* the page iterator.
* @dma_iter: page iterator holding the page
*/
static inline dma_addr_t
sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
{
return sg_dma_address(dma_iter->base.sg) +
(dma_iter->base.sg_pgoffset << PAGE_SHIFT);
}
/**
* for_each_sg_page - iterate over the pages of the given sg list
* @sglist: sglist to iterate over
* @piter: page iterator to hold current page, sg, sg_pgoffset
* @nents: maximum number of sg entries to iterate over
* @pgoffset: starting page offset (in pages)
*
* Callers may use sg_page_iter_page() to get each page pointer.
* In each loop it operates on PAGE_SIZE unit.
*/
#define for_each_sg_page(sglist, piter, nents, pgoffset) \
for (__sg_page_iter_start((piter), (sglist), (nents), (pgoffset)); \
__sg_page_iter_next(piter);)
/**
* for_each_sg_dma_page - iterate over the pages of the given sg list
* @sglist: sglist to iterate over
* @dma_iter: DMA page iterator to hold current page
* @dma_nents: maximum number of sg entries to iterate over, this is the value
* returned from dma_map_sg
* @pgoffset: starting page offset (in pages)
*
* Callers may use sg_page_iter_dma_address() to get each page's DMA address.
* In each loop it operates on PAGE_SIZE unit.
*/
#define for_each_sg_dma_page(sglist, dma_iter, dma_nents, pgoffset) \
for (__sg_page_iter_start(&(dma_iter)->base, sglist, dma_nents, \
pgoffset); \
__sg_page_iter_dma_next(dma_iter);)
/**
* for_each_sgtable_page - iterate over all pages in the sg_table object
* @sgt: sg_table object to iterate over
* @piter: page iterator to hold current page
* @pgoffset: starting page offset (in pages)
*
* Iterates over the all memory pages in the buffer described by
* a scatterlist stored in the given sg_table object.
* See also for_each_sg_page(). In each loop it operates on PAGE_SIZE unit.
*/
#define for_each_sgtable_page(sgt, piter, pgoffset) \
for_each_sg_page((sgt)->sgl, piter, (sgt)->orig_nents, pgoffset)
/**
* for_each_sgtable_dma_page - iterate over the DMA mapped sg_table object
* @sgt: sg_table object to iterate over
* @dma_iter: DMA page iterator to hold current page
* @pgoffset: starting page offset (in pages)
*
* Iterates over the all DMA mapped pages in the buffer described by
* a scatterlist stored in the given sg_table object.
* See also for_each_sg_dma_page(). In each loop it operates on PAGE_SIZE
* unit.
*/
#define for_each_sgtable_dma_page(sgt, dma_iter, pgoffset) \
for_each_sg_dma_page((sgt)->sgl, dma_iter, (sgt)->nents, pgoffset)
/*
* Mapping sg iterator
*
* Iterates over sg entries mapping page-by-page. On each successful
* iteration, @miter->page points to the mapped page and
* @miter->length bytes of data can be accessed at @miter->addr. As
* long as an iteration is enclosed between start and stop, the user
* is free to choose control structure and when to stop.
*
* @miter->consumed is set to @miter->length on each iteration. It
* can be adjusted if the user can't consume all the bytes in one go.
* Also, a stopped iteration can be resumed by calling next on it.
* This is useful when iteration needs to release all resources and
* continue later (e.g. at the next interrupt).
*/
#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */
#define SG_MITER_FROM_SG (1 << 2) /* nop */
struct sg_mapping_iter {
/* the following three fields can be accessed directly */
struct page *page; /* currently mapped page */
void *addr; /* pointer to the mapped area */
size_t length; /* length of the mapped area */
size_t consumed; /* number of consumed bytes */
struct sg_page_iter piter; /* page iterator */
/* these are internal states, keep away */
unsigned int __offset; /* offset within page */
unsigned int __remaining; /* remaining bytes on page */
unsigned int __flags;
};
void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
unsigned int nents, unsigned int flags);
bool sg_miter_skip(struct sg_mapping_iter *miter, off_t offset);
bool sg_miter_next(struct sg_mapping_iter *miter);
void sg_miter_stop(struct sg_mapping_iter *miter);
#endif /* _LINUX_SCATTERLIST_H */
Reference in New Issue View Git Blame Copy Permalink