linux/drivers/hwtracing/intel_th/Makefile

obj-$(CONFIG_INTEL_TH)		+= intel_th.o
intel_th-y			:= core.o
intel_th-$(CONFIG_INTEL_TH_DEBUG) += debug.o

obj-$(CONFIG_INTEL_TH_PCI)	+= intel_th_pci.o
intel_th_pci-y			:= pci.o

obj-$(CONFIG_INTEL_TH_GTH)	+= intel_th_gth.o
intel_th_gth-y			:= gth.o
intel_th: Add driver infrastructure for Intel(R) Trace Hub devices Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that produce, switch and output trace data from multiple hardware and software sources over several types of trace output ports encoded in System Trace Protocol (MIPI STPv2) and is intended to perform full system debugging. For these subdevices, we create a bus, where they can be discovered and configured by userspace software. This patch creates this bus infrastructure, three types of devices (source, output, switch), resource allocation, some callback mechanisms to facilitate communication between the subdevices' drivers and some common sysfs attributes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-09-22 15:47:14 +03:00			`obj-$(CONFIG_INTEL_TH) += intel_th.o`
			`intel_th-y := core.o`
			`intel_th-$(CONFIG_INTEL_TH_DEBUG) += debug.o`
intel_th: Add pci glue layer for Intel(R) Trace Hub This patch adds basic support for PCI-based Intel TH devices. It requests 2 bars (configuration registers for the subdevices and STH channel MMIO region) and calls into Intel TH core code to create the bus with subdevices etc. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-09-22 15:47:15 +03:00
			`obj-$(CONFIG_INTEL_TH_PCI) += intel_th_pci.o`
			`intel_th_pci-y := pci.o`
intel_th: Add Global Trace Hub driver Global Trace Hub (GTH) is the central component of Intel TH architecture; it carries out switching between the trace sources and trace outputs, can enable/disable tracing, perform STP encoding, internal buffering, control backpressure from outputs to sources and so on. This property is also reflected in the software model; GTH (switch) driver is required for the other subdevices to probe, because it matches trace output devices against its output ports and configures them accordingly. It also implements an interface for output ports to request trace enabling or disabling and a few other useful things. For userspace, it provides an attribute group "masters", which allows configuration of per-master trace output destinations for up to master 255 and "256+" meaning "masters 256 and above". It also provides an attribute group to discover and configure some of the parameters of its output ports, called "outputs". Via these the user can set up data retention policy for an individual output port or check if it is in reset state. Signed-off-by: Laurent Fert <laurent.fert@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-09-22 15:47:16 +03:00
			`obj-$(CONFIG_INTEL_TH_GTH) += intel_th_gth.o`
			`intel_th_gth-y := gth.o`