mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2024-12-29 09:13:38 +00:00
mmc: sdhci-pci-gli: enable UHS-II mode for GL9767
Changes are: * Enable the internal clock when do reset on UHS-II mode. * Increase timeout value before detecting UHS-II interface. * Add vendor settings for UHS-II mode. * Use the function sdhci_gli_wait_software_reset_done() for gl9767 reset. * Remove unnecessary code from sdhci_gl9767_reset(). Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Signed-off-by: Lucas Lai <lucas.lai@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Message-ID: <20241018105333.4569-17-victorshihgli@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
5e445111af
commit
27dd3b8255
@ -174,6 +174,15 @@
|
||||
#define PCI_GLI_9755_MISC 0x78
|
||||
#define PCI_GLI_9755_MISC_SSC_OFF BIT(26)
|
||||
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL 0x508
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK BIT(0)
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE GENMASK(21, 16)
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE 0x05
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE 0x3F
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE GENMASK(23, 22)
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS 0x2
|
||||
#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS 0x3
|
||||
|
||||
#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
|
||||
#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
|
||||
|
||||
@ -210,6 +219,13 @@
|
||||
#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21)
|
||||
#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30)
|
||||
|
||||
#define PCIE_GLI_9767_RESET_REG 0x8E4
|
||||
#define PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET BIT(0)
|
||||
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG1 0x90C
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR GENMASK(31, 29)
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE 0x3
|
||||
|
||||
#define PCIE_GLI_9767_SDHC_CAP 0x91C
|
||||
#define PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT BIT(5)
|
||||
|
||||
@ -228,9 +244,15 @@
|
||||
#define PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE BIT(1)
|
||||
|
||||
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL 0x944
|
||||
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 BIT(5)
|
||||
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL BIT(8)
|
||||
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME GENMASK(23, 16)
|
||||
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE 0x64
|
||||
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG2 0x948
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING GENMASK(22, 21)
|
||||
#define PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE 0x0
|
||||
|
||||
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2 0x950
|
||||
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE BIT(0)
|
||||
|
||||
@ -240,6 +262,28 @@
|
||||
#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2 0x958
|
||||
#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN BIT(0)
|
||||
|
||||
#define PCIE_GLI_9767_UHS2_CTL1 0x95C
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS BIT(5)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE 0x1
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL BIT(6)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE 0x1
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN GENMASK(10, 7)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE 0x3
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV GENMASK(14, 11)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE 0xf
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS GENMASK(16, 15)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE 0x0
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DIR_RECV GENMASK(18, 17)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE 0x0
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_PDRST BIT(25)
|
||||
#define PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE 0x1
|
||||
|
||||
#define PCIE_GLI_9767_UHS2_CTL2 0x964
|
||||
#define PCIE_GLI_9767_UHS2_CTL2_ZC GENMASK(3, 0)
|
||||
#define PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE 0xb
|
||||
#define PCIE_GLI_9767_UHS2_CTL2_ZC_CTL BIT(6)
|
||||
#define PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE 0x1
|
||||
|
||||
#define GLI_MAX_TUNING_LOOP 40
|
||||
|
||||
/* Genesys Logic chipset */
|
||||
@ -1155,6 +1199,31 @@ static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
|
||||
gl9767_vhs_read(pdev);
|
||||
}
|
||||
|
||||
static void sdhci_gl9767_set_card_detect_debounce_time(struct sdhci_host *host)
|
||||
{
|
||||
u32 value;
|
||||
|
||||
value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
|
||||
value &= ~(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE |
|
||||
SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE);
|
||||
if (sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
|
||||
value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
|
||||
SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE) |
|
||||
FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
|
||||
SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS);
|
||||
else
|
||||
value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
|
||||
SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE) |
|
||||
FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
|
||||
SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS);
|
||||
sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
|
||||
}
|
||||
|
||||
static void sdhci_gl9767_card_event(struct sdhci_host *host)
|
||||
{
|
||||
sdhci_gl9767_set_card_detect_debounce_time(host);
|
||||
}
|
||||
|
||||
static void gli_set_9767(struct sdhci_host *host)
|
||||
{
|
||||
u32 value;
|
||||
@ -1162,6 +1231,12 @@ static void gli_set_9767(struct sdhci_host *host)
|
||||
value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
|
||||
value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
|
||||
sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
|
||||
|
||||
value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
|
||||
value &= ~SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK;
|
||||
sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
|
||||
|
||||
sdhci_gl9767_set_card_detect_debounce_time(host);
|
||||
}
|
||||
|
||||
static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
|
||||
@ -1200,7 +1275,43 @@ static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
|
||||
|
||||
static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
|
||||
{
|
||||
sdhci_reset(host, mask);
|
||||
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
||||
struct pci_dev *pdev = slot->chip->pdev;
|
||||
u32 value;
|
||||
|
||||
/* need internal clock */
|
||||
if (mask & SDHCI_RESET_ALL) {
|
||||
sdhci_gli_enable_internal_clock(host);
|
||||
|
||||
gl9767_vhs_write(pdev);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_RESET_REG, &value);
|
||||
value &= ~PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET;
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_RESET_REG, value);
|
||||
|
||||
if (read_poll_timeout_atomic(pci_read_config_dword, value,
|
||||
!(value & PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET),
|
||||
1, 5, true, pdev, PCIE_GLI_9767_RESET_REG, &value)) {
|
||||
pr_warn("%s: %s: Reset SDHC AHB and TL-AMBA failure.\n",
|
||||
__func__, mmc_hostname(host->mmc));
|
||||
gl9767_vhs_read(pdev);
|
||||
return;
|
||||
}
|
||||
gl9767_vhs_read(pdev);
|
||||
}
|
||||
|
||||
if (mmc_card_uhs2(host->mmc)) {
|
||||
if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) {
|
||||
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
|
||||
sdhci_gli_uhs2_reset_sd_tran(host);
|
||||
sdhci_gli_wait_software_reset_done(host, mask);
|
||||
} else {
|
||||
sdhci_uhs2_reset(host, mask);
|
||||
}
|
||||
} else {
|
||||
sdhci_reset(host, mask);
|
||||
}
|
||||
|
||||
gli_set_9767(host);
|
||||
}
|
||||
|
||||
@ -1291,6 +1402,86 @@ static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void gl9767_vendor_init(struct sdhci_host *host)
|
||||
{
|
||||
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
||||
struct pci_dev *pdev = slot->chip->pdev;
|
||||
u32 value;
|
||||
|
||||
gl9767_vhs_write(pdev);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, &value);
|
||||
value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR,
|
||||
PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, value);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, &value);
|
||||
value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING,
|
||||
PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, value);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, &value);
|
||||
value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS,
|
||||
PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL,
|
||||
PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN,
|
||||
PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV,
|
||||
PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS,
|
||||
PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_RECV,
|
||||
PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_PDRST,
|
||||
PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, value);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value);
|
||||
value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC,
|
||||
PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE) |
|
||||
FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC_CTL,
|
||||
PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value);
|
||||
|
||||
gl9767_vhs_read(pdev);
|
||||
}
|
||||
|
||||
static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd)
|
||||
{
|
||||
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
||||
struct pci_dev *pdev = slot->chip->pdev;
|
||||
u32 value;
|
||||
|
||||
if (mmc_card_uhs2(host->mmc)) {
|
||||
gl9767_vhs_write(pdev);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
|
||||
value |= PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
|
||||
PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL;
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
|
||||
|
||||
gl9767_vhs_read(pdev);
|
||||
|
||||
sdhci_gli_overcurrent_event_enable(host, false);
|
||||
sdhci_uhs2_set_power(host, mode, vdd);
|
||||
sdhci_gli_overcurrent_event_enable(host, true);
|
||||
} else {
|
||||
gl9767_vhs_write(pdev);
|
||||
|
||||
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
|
||||
value &= ~(PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
|
||||
PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL);
|
||||
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
|
||||
|
||||
gl9767_vhs_read(pdev);
|
||||
|
||||
sdhci_gli_overcurrent_event_enable(host, false);
|
||||
sdhci_set_power(host, mode, vdd);
|
||||
sdhci_gli_overcurrent_event_enable(host, true);
|
||||
}
|
||||
}
|
||||
|
||||
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
struct sdhci_host *host = slot->host;
|
||||
@ -1327,6 +1518,7 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
|
||||
host->mmc->caps2 |= MMC_CAP2_SD_EXP;
|
||||
host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
|
||||
sdhci_enable_v4_mode(host);
|
||||
gl9767_vendor_init(host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -1830,12 +2022,20 @@ static const struct sdhci_ops sdhci_gl9767_ops = {
|
||||
.reset = sdhci_gl9767_reset,
|
||||
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
||||
.voltage_switch = sdhci_gl9767_voltage_switch,
|
||||
.dump_uhs2_regs = sdhci_uhs2_dump_regs,
|
||||
.set_timeout = sdhci_uhs2_set_timeout,
|
||||
.irq = sdhci_uhs2_irq,
|
||||
.set_power = sdhci_gl9767_set_power,
|
||||
.uhs2_pre_detect_init = sdhci_gli_pre_detect_init,
|
||||
.card_event = sdhci_gl9767_card_event,
|
||||
};
|
||||
|
||||
const struct sdhci_pci_fixes sdhci_gl9767 = {
|
||||
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
||||
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
||||
.probe_slot = gli_probe_slot_gl9767,
|
||||
.add_host = sdhci_pci_uhs2_add_host,
|
||||
.remove_host = sdhci_pci_uhs2_remove_host,
|
||||
.ops = &sdhci_gl9767_ops,
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
.resume = sdhci_pci_gli_resume,
|
||||
|
Loading…
Reference in New Issue
Block a user