Kernel/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2024-12-29 09:13:38 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

soc: fixes for 6.12, part 2

Browse Source 
Where the last set of fixes was mostly drivers, this time the devicetree
 changes all come at once, targeting mostly the Rockchips, Qualcomm and
 NXP platforms.
 
 The Qualcomm bugfixes target the Snapdragon X Elite laptops, specifically
 problems with PCIe and NVMe support to improve reliability, and a boot
 regresion on msm8939. Also for Snapdragon platforms, there are a number
 of correctness changes in the several platform specific device drivers,
 but none of these are as impactful.
 
 On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
 correcting individual entries in the devicetree that were incorrect and
 causing the media, video, mmc and spi drivers to misbehave in minor
 ways.
 
 The Arm SCMI firmware driver gets fixes for a use-after-free bug and
 for correctly parsing firmware information.
 
 On the RISC-V side, there are three minor devicetree fixes for starfive
 and sophgo, again addressing only minor mistakes. One device driver
 patch fixes a problem with spurious interrupt handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcpR7oACgkQYKtH/8kJ
 Uic9dA/+NzeNald+ap++pYYmIx9FcV3q3aieN4j5NRgAwUS84bNXpARkDQAK8lx8
 GFzH7VUe0YwKlh+70P73eaLqsRyYE37eUyvabwnxgO0QnI798MZfM5diDvAFm0LK
 kQKnNLx0qojt6HQTN3PVfOn+rcp2J5dgUV+ZAG9TEM3YKA0MY/bABRqaZtIZzSxg
 WwM+jqFh5+EugiioSlL6HCdAVk12wwEJkAInEEY1y/KaeQS9K8vzEOwk4FDeIf2a
 3V+G7IVIBI4rbvrAs2ukW3OrRiGT+svINS5k7qkap13YZUUjENnJYGYNm6woTTyb
 INpBowLKr1gJ1Aluk8AELvpa+aX1BY9rkxP+vTG0HrZVdrPcPToFUBQA4qZgpu/i
 k0uWb20uN1b2Uor2XP2hcTxvzfKPlvnYHxLTMG89PxoVrMX+oEQoCrAP24YcSkPd
 srV0aU54MUHANXEnNco0txdElK+8L7ZCyB19KpVnqqshohDpQ+zkX15Hw9uQLwEc
 RbF99SrR9KFg3sY62Q7LgJOhQ3x6LjGhqPCjejIZ9DvEzndArKYnkkiJYdxxhqkB
 WN1LB/PmnKPAAh1lJdej6SPhiwCCpEFG3IyS/H1/lv7CR94LVode1J4dYTJmcZaq
 aownmb4W1zECgMGQS6YjhuAG1h7D0QtSmWBAuiC+H+T2QTRPtKI=
 =9YYG
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "Where the last set of fixes was mostly drivers, this time the
  devicetree changes all come at once, targeting mostly the Rockchips,
  Qualcomm and NXP platforms.

  The Qualcomm bugfixes target the Snapdragon X Elite laptops,
  specifically problems with PCIe and NVMe support to improve
  reliability, and a boot regresion on msm8939.

  Also for Snapdragon platforms, there are a number of correctness
  changes in the several platform specific device drivers, but none of
  these are as impactful.

  On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
  correcting individual entries in the devicetree that were incorrect
  and causing the media, video, mmc and spi drivers to misbehave in
  minor ways.

  The Arm SCMI firmware driver gets fixes for a use-after-free bug and
  for correctly parsing firmware information.

  On the RISC-V side, there are three minor devicetree fixes for
  starfive and sophgo, again addressing only minor mistakes. One device
  driver patch fixes a problem with spurious interrupt handling"

* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
  firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
  dt-bindings: firmware: arm,scmi: Add missing vendor string
  riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
  arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
  arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
  ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
  ARM: dts: rockchip: Fix the spi controller on rk3036
  ARM: dts: rockchip: drop grf reference from rk3036 hdmi
  ARM: dts: rockchip: fix rk3036 acodec node
  arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
  soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
  rpmsg: glink: Handle rejected intent request better
  arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
  arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
  arm64: dts: qcom: x1e80100: Fix up BAR spaces
  MAINTAINERS: invert Misc RISC-V SoC Support's pattern
  soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
  ...
This commit is contained in:
Linus Torvalds 2024-11-04 15:23:26 -10:00
commit 2e1b3cc9d7
59 changed files with 213 additions and 158 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/firmware/arm,scmi.yaml
View File

@ -124,7 +124,7 @@ properties:
atomic mode of operation, even if requested.
default: 0
max-rx-timeout-ms:
arm,max-rx-timeout-ms:
description:
An optional time value, expressed in milliseconds, representing the
transport maximum timeout value for the receive channel. The value should

12
MAINTAINERS
View File

@ -2852,7 +2852,7 @@ F: Documentation/devicetree/bindings/arm/qcom.yaml
F: Documentation/devicetree/bindings/bus/qcom*
F: Documentation/devicetree/bindings/cache/qcom,llcc.yaml
F: Documentation/devicetree/bindings/firmware/qcom,scm.yaml
F: Documentation/devicetree/bindings/reserved-memory/qcom
F: Documentation/devicetree/bindings/reserved-memory/qcom*
F: Documentation/devicetree/bindings/soc/qcom/
F: arch/arm/boot/dts/qcom/
F: arch/arm/configs/qcom_defconfig
@ -19846,12 +19846,10 @@ L: linux-riscv@lists.infradead.org
S: Maintained
Q: https://patchwork.kernel.org/project/linux-riscv/list/
T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
F: Documentation/devicetree/bindings/riscv/
F: arch/riscv/boot/dts/
X: arch/riscv/boot/dts/allwinner/
X: arch/riscv/boot/dts/renesas/
X: arch/riscv/boot/dts/sophgo/
X: arch/riscv/boot/dts/thead/
F: arch/riscv/boot/dts/canaan/
F: arch/riscv/boot/dts/microchip/
F: arch/riscv/boot/dts/sifive/
F: arch/riscv/boot/dts/starfive/
RISC-V PMU DRIVERS
M: Atish Patra <atishp@atishpatra.org>

4
arch/arm/boot/dts/rockchip/rk3036-kylin.dts
View File

@ -325,8 +325,8 @@ regulator-state-mem {
&i2c2 {
status = "okay";
rt5616: rt5616@1b {
compatible = "rt5616";
rt5616: audio-codec@1b {
compatible = "realtek,rt5616";
reg = <0x1b>;
clocks = <&cru SCLK_I2S_OUT>;
clock-names = "mclk";

14
arch/arm/boot/dts/rockchip/rk3036.dtsi
View File

@ -384,12 +384,13 @@ reboot-mode {
};
};
acodec: acodec-ana@20030000 {
compatible = "rk3036-codec";
acodec: audio-codec@20030000 {
compatible = "rockchip,rk3036-codec";
reg = <0x20030000 0x4000>;
rockchip,grf = <&grf>;
clock-names = "acodec_pclk";
clocks = <&cru PCLK_ACODEC>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
status = "disabled";
};
@ -399,7 +400,6 @@ hdmi: hdmi@20034000 {
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>;
clock-names = "pclk";
rockchip,grf = <&grf>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
#sound-dai-cells = <0>;
@ -553,11 +553,11 @@ i2c0: i2c@20072000 {
};
spi: spi@20074000 {
compatible = "rockchip,rockchip-spi";
compatible = "rockchip,rk3036-spi";
reg = <0x20074000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
clock-names = "apb-pclk","spi_pclk";
clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
clock-names = "spiclk", "apb_pclk";
dmas = <&pdma 8>, <&pdma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";

12
arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
View File

@ -14,7 +14,7 @@ qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x56243000 0x4>;
#clock-cells = <1>;
clock-output-names = "mipi1_lis_lpcg_ipg_clk";
clock-output-names = "lvds0_lis_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_MIPI_1>;
};
@ -22,9 +22,9 @@ qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5624300c 0x4>;
#clock-cells = <1>;
clock-output-names = "mipi1_pwm_lpcg_clk",
"mipi1_pwm_lpcg_ipg_clk",
"mipi1_pwm_lpcg_32k_clk";
clock-output-names = "lvds0_pwm_lpcg_clk",
"lvds0_pwm_lpcg_ipg_clk",
"lvds0_pwm_lpcg_32k_clk";
power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
};
@ -32,8 +32,8 @@ qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x56243010 0x4>;
#clock-cells = <1>;
clock-output-names = "mipi1_i2c0_lpcg_clk",
"mipi1_i2c0_lpcg_ipg_clk";
clock-output-names = "lvds0_i2c0_lpcg_clk",
"lvds0_i2c0_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
};

4
arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
View File

@ -15,7 +15,7 @@ vpu: vpu@2c000000 {
mu_m0: mailbox@2d000000 {
compatible = "fsl,imx6sx-mu";
reg = <0x2d000000 0x20000>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_VPU_MU_0>;
status = "disabled";
@ -24,7 +24,7 @@ mu_m0: mailbox@2d000000 {
mu1_m0: mailbox@2d020000 {
compatible = "fsl,imx6sx-mu";
reg = <0x2d020000 0x20000>;
interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_VPU_MU_1>;
status = "disabled";

12
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
View File

@ -218,6 +218,18 @@ ldb_lvds_ch1: endpoint {
};
};
&media_blk_ctrl {
/*
* The LVDS panel on this device uses 72.4 MHz pixel clock,
* set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
* serializer and LCDIFv3 scanout engine can reach accurate
* pixel clock of exactly 72.4 MHz.
*/
assigned-clock-rates = <500000000>, <200000000>,
<0>, <0>, <500000000>,
<506800000>;
};
&snvs_pwrkey {
status = "okay";
};

1
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
View File

@ -71,6 +71,7 @@ &media_blk_ctrl {
assigned-clock-rates = <500000000>, <200000000>, <0>,
/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
<68900000>,
<500000000>,
/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
<964600000>;
};

6
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -1261,7 +1261,7 @@ usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -1275,7 +1275,7 @@ usdhc2: mmc@30b50000 {
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
@ -1289,7 +1289,7 @@ usdhc3: mmc@30b60000 {
compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
<&clk IMX8MP_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";

8
arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
View File

@ -5,6 +5,14 @@
* Author: Alexander Stein
*/
&mu_m0 {
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
};
&mu1_m0 {
interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
};
&vpu_core0 {
reg = <0x2d040000 0x10000>;
};

2
arch/arm64/boot/dts/freescale/imx8ulp.dtsi
View File

@ -384,7 +384,7 @@ pcc4: clock-controller@29800000 {
};
flexspi2: spi@29810000 {
compatible = "nxp,imx8mm-fspi";
compatible = "nxp,imx8ulp-fspi";
reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
#address-cells = <1>;

2
arch/arm64/boot/dts/qcom/msm8939.dtsi
View File

@ -248,7 +248,7 @@ rpm: remoteproc {
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs1_mbox 0>;
qcom,ipc = <&apcs1_mbox 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {

2
arch/arm64/boot/dts/qcom/sm8450.dtsi
View File

@ -1973,7 +1973,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
<&pcie1_phy>,
<&pcie1_phy QMP_PCIE_PIPE_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,

2
arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
View File

@ -139,6 +139,8 @@ vreg_nvme: regulator-nvme {
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vph_pwr: regulator-vph-pwr {

2
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
View File

@ -134,6 +134,8 @@ vreg_nvme: regulator-nvme {
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
};

10
arch/arm64/boot/dts/qcom/x1e80100-crd.dts
View File

@ -177,9 +177,9 @@ sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-CRD";
audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
"TwitterLeft IN", "WSA WSA_SPK2 OUT",
"TweeterLeft IN", "WSA WSA_SPK2 OUT",
"WooferRight IN", "WSA2 WSA_SPK2 OUT",
"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
@ -300,6 +300,8 @@ vreg_nvme: regulator-nvme {
pinctrl-names = "default";
pinctrl-0 = <&nvme_reg_en>;
regulator-boot-on;
};
vreg_wwan: regulator-wwan {
@ -933,7 +935,7 @@ left_tweeter: speaker@0,1 {
reg = <0 1>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterLeft";
sound-name-prefix = "TweeterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;
@ -986,7 +988,7 @@ right_tweeter: speaker@0,1 {
reg = <0 1>;
reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterRight";
sound-name-prefix = "TweeterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;

2
arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
View File

@ -205,6 +205,8 @@ vreg_nvme: regulator-nvme {
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
};

2
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
View File

@ -164,6 +164,8 @@ vreg_nvme: regulator-nvme {
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
};

2
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
View File

@ -253,6 +253,8 @@ vreg_nvme: regulator-nvme {
pinctrl-names = "default";
pinctrl-0 = <&nvme_reg_en>;
regulator-boot-on;
};
};

53
arch/arm64/boot/dts/qcom/x1e80100.dtsi
View File

@ -2924,14 +2924,14 @@ pcie6a: pci@1bf8000 {
"mhi";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
<0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
bus-range = <0 0xff>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
<0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
bus-range = <0x00 0xff>;
dma-coherent;
linux,pci-domain = <6>;
num-lanes = <2>;
num-lanes = <4>;
interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
@ -2997,19 +2997,22 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
};
pcie6a_phy: phy@1bfc000 {
compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
reg = <0 0x01bfc000 0 0x2000>;
compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
reg = <0 0x01bfc000 0 0x2000>,
<0 0x01bfe000 0 0x2000>;
clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
<&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&tcsr TCSR_PCIE_4L_CLKREF_EN>,
<&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_6A_PIPE_CLK>;
<&gcc GCC_PCIE_6A_PIPE_CLK>,
<&gcc GCC_PCIE_6A_PIPEDIV2_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"rchng",
"pipe";
"pipe",
"pipediv2";
resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
<&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
@ -3021,6 +3024,8 @@ pcie6a_phy: phy@1bfc000 {
power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
#clock-cells = <0>;
clock-output-names = "pcie6a_pipe_clk";
@ -3097,7 +3102,7 @@ pcie5: pci@1c00000 {
assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
assigned-clock-rates = <19200000>;
interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
@ -3124,14 +3129,16 @@ pcie5_phy: phy@1c06000 {
clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
<&gcc GCC_PCIE_5_CFG_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&tcsr TCSR_PCIE_2L_5_CLKREF_EN>,
<&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_5_PIPE_CLK>;
<&gcc GCC_PCIE_5_PIPE_CLK>,
<&gcc GCC_PCIE_5_PIPEDIV2_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"rchng",
"pipe";
"pipe",
"pipediv2";
resets = <&gcc GCC_PCIE_5_PHY_BCR>;
reset-names = "phy";
@ -3166,8 +3173,8 @@ pcie4: pci@1c08000 {
"mhi";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
<0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>,
<0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>;
bus-range = <0x00 0xff>;
dma-coherent;
@ -3217,7 +3224,7 @@ pcie4: pci@1c08000 {
assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
assigned-clock-rates = <19200000>;
interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
@ -3254,14 +3261,16 @@ pcie4_phy: phy@1c0e000 {
clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
<&gcc GCC_PCIE_4_CFG_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&tcsr TCSR_PCIE_2L_4_CLKREF_EN>,
<&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_4_PIPE_CLK>;
<&gcc GCC_PCIE_4_PIPE_CLK>,
<&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"rchng",
"pipe";
"pipe",
"pipediv2";
resets = <&gcc GCC_PCIE_4_PHY_BCR>;
reset-names = "phy";
@ -6084,7 +6093,8 @@ system-cache-controller@25000000 {
<0 0x25a00000 0 0x200000>,
<0 0x25c00000 0 0x200000>,
<0 0x25e00000 0 0x200000>,
<0 0x26000000 0 0x200000>;
<0 0x26000000 0 0x200000>,
<0 0x26200000 0 0x200000>;
reg-names = "llcc0_base",
"llcc1_base",
"llcc2_base",
@ -6093,7 +6103,8 @@ system-cache-controller@25000000 {
"llcc5_base",
"llcc6_base",
"llcc7_base",
"llcc_broadcast_base";
"llcc_broadcast_base",
"llcc_broadcast_and_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};

1
arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
View File

@ -66,7 +66,6 @@ &emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
supports-emmc;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
vmmc-supply = <&vcc_3v3>;

4
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
View File

@ -36,14 +36,14 @@ leds {
power_led: led-0 {
label = "firefly:red:power";
linux,default-trigger = "ir-power-click";
linux,default-trigger = "default-on";
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
};
user_led: led-1 {
label = "firefly:blue:user";
linux,default-trigger = "ir-user-click";
linux,default-trigger = "rc-feedback";
default-state = "off";
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
};

2
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
View File

@ -24,9 +24,7 @@ &emmc {
disable-wp;
mmc-hs200-1_8v;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
supports-emmc;
status = "okay";
};

3
arch/arm64/boot/dts/rockchip/rk3328.dtsi
View File

@ -754,8 +754,7 @@ hdmi: hdmi@ff3c0000 {
compatible = "rockchip,rk3328-dw-hdmi";
reg = <0x0 0xff3c0000 0x0 0x20000>;
reg-io-width = <4>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
<&cru SCLK_RTC32K>;

1
arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
View File

@ -61,7 +61,6 @@ i2c_lvds_blc: i2c@0 {
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
#cooling-cells = <2>;
};
rtc_twi: rtc@6f {

2
arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
View File

@ -541,7 +541,7 @@ &i2c1 {
status = "okay";
rt5651: audio-codec@1a {
compatible = "rockchip,rt5651";
compatible = "realtek,rt5651";
reg = <0x1a>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-names = "mclk";

2
arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
View File

@ -166,7 +166,6 @@ vcc1v8_lcd: vcc1v8-lcd {
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
};
/* MIPI DSI panel 2.8v supply */
@ -178,7 +177,6 @@ vcc2v8_lcd: vcc2v8-lcd {
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
};
vibrator {

1
arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
View File

@ -114,7 +114,6 @@ &i2c1 {
es8388: es8388@11 {
compatible = "everest,es8388";
reg = <0x11>;
clock-names = "mclk";
clocks = <&cru SCLK_I2S_8CH_OUT>;
#sound-dai-cells = <0>;
};

2
arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
View File

@ -576,7 +576,7 @@ &uart0 {
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
clock-names = "ext_clock";
clock-names = "txco";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;

2
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
View File

@ -163,7 +163,7 @@ &i2c1 {
status = "okay";
rt5651: rt5651@1a {
compatible = "rockchip,rt5651";
compatible = "realtek,rt5651";
reg = <0x1a>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
clock-names = "mclk";

2
arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
View File

@ -92,7 +92,7 @@ button-r2 {
};
&i2c2 {
pintctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";

2
arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
View File

@ -79,7 +79,7 @@ button-r2 {
};
&i2c2 {
pintctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";

6
arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
View File

@ -449,9 +449,9 @@ &uart1 {
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&pmucru CLK_RTC_32K>;
clock-names = "ext_clock";
device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
clock-names = "txco";
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;

1
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
View File

@ -507,7 +507,6 @@ &sdhci {
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
supports-emmc;
status = "okay";
};

6
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
View File

@ -684,11 +684,11 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
pinctrl-names = "default";
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_wl>;
vddio-supply = <&vcca_1v8_pmu>;
};

2
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
View File

@ -402,9 +402,9 @@ bluetooth {
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_3v3>;
vddio-supply = <&vcc_1v8>;
};

1
arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
View File

@ -589,7 +589,6 @@ &sdhci {
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
supports-emmc;
status = "okay";
};

3
arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
View File

@ -272,7 +272,6 @@ vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@ -285,7 +284,6 @@ regulator-state-mem {
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@ -309,7 +307,6 @@ regulator-state-mem {
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;

6
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
View File

@ -337,7 +337,12 @@ l2_cache_b3: l2-cache-b3 {
cache-unified;
next-level-cache = <&l3_cache>;
};
};
/*
* The L3 cache belongs to the DynamIQ Shared Unit (DSU),
* so it's represented here, outside the "cpus" node
*/
l3_cache: l3-cache {
compatible = "cache";
cache-size = <3145728>;
@ -346,7 +351,6 @@ l3_cache: l3-cache {
cache-level = <3>;
cache-unified;
};
};
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";

1
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
View File

@ -328,7 +328,6 @@ es8388: audio-codec@11 {
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
AVDD-supply = <&vcc_1v8_s0>;
DVDD-supply = <&vcc_1v8_s0>;
HPVDD-supply = <&vcc_3v3_s0>;

1
arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
View File

@ -316,7 +316,6 @@ es8388: audio-codec@11 {
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
AVDD-supply = <&avcc_1v8_codec_s0>;
DVDD-supply = <&avcc_1v8_codec_s0>;
HPVDD-supply = <&vcc_3v3_s0>;

4
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
View File

@ -304,12 +304,12 @@ package_fan1: package-fan1 {
};
cooling-maps {
map1 {
map0 {
trip = <&package_fan0>;
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
};
map2 {
map1 {
trip = <&package_fan1>;
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
};

1
arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
View File

@ -428,7 +428,6 @@ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-init-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {

1
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
View File

@ -296,6 +296,7 @@ pmic@0 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;

1
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
View File

@ -377,7 +377,6 @@ es8388: audio-codec@11 {
assigned-clock-rates = <12288000>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
AVDD-supply = <&vcc_3v3_s3>;
clock-names = "mclk";
clocks = <&cru I2S0_8CH_MCLKOUT>;
DVDD-supply = <&vcc_1v8_s3>;
HPVDD-supply = <&vcc_3v3_s3>;

6
arch/riscv/boot/dts/sophgo/sg2042.dtsi
View File

@ -112,7 +112,7 @@ port0a: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@ -134,7 +134,7 @@ port1a: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@ -156,7 +156,7 @@ port2a: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;

2
arch/riscv/boot/dts/starfive/jh7110-common.dtsi
View File

@ -128,7 +128,6 @@ &camss {
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
assigned-clock-rates = <49500000>, <198000000>;
status = "okay";
ports {
#address-cells = <1>;
@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
&csi2rx {
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
assigned-clock-rates = <297000000>;
status = "okay";
ports {
#address-cells = <1>;

3
arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
View File

@ -44,8 +44,7 @@ &pcie1 {
};
&phy0 {
rx-internal-delay-ps = <1900>;
tx-internal-delay-ps = <1500>;
rx-internal-delay-ps = <1500>;
motorcomm,rx-clk-drv-microamp = <2910>;
motorcomm,rx-data-drv-microamp = <2910>;
motorcomm,tx-clk-adj-enabled;

2
drivers/edac/qcom_edac.c
View File

@ -342,9 +342,11 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
int ecc_irq;
int rc;
if (!llcc_driv_data->ecc_irq_configured) {
rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
if (rc)
return rc;
}
/* Allocate edac control info */
edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",

7
drivers/firmware/arm_scmi/bus.c
View File

@ -325,7 +325,10 @@ EXPORT_SYMBOL_GPL(scmi_driver_unregister);
static void scmi_device_release(struct device *dev)
{
kfree(to_scmi_dev(dev));
struct scmi_device *scmi_dev = to_scmi_dev(dev);
kfree_const(scmi_dev->name);
kfree(scmi_dev);
}
static void __scmi_device_destroy(struct scmi_device *scmi_dev)
@ -338,7 +341,6 @@ static void __scmi_device_destroy(struct scmi_device *scmi_dev)
if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM)
atomic_set(&scmi_syspower_registered, 0);
kfree_const(scmi_dev->name);
ida_free(&scmi_bus_id, scmi_dev->id);
device_unregister(&scmi_dev->dev);
}
@ -410,7 +412,6 @@ __scmi_device_create(struct device_node *np, struct device *parent,
return scmi_dev;
put_dev:
kfree_const(scmi_dev->name);
put_device(&scmi_dev->dev);
ida_free(&scmi_bus_id, id);
return NULL;

2
drivers/firmware/arm_scmi/common.h
View File

@ -163,6 +163,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
* used to initialize this channel
* @dev: Reference to device in the SCMI hierarchy corresponding to this
* channel
* @is_p2a: A flag to identify a channel as P2A (RX)
* @rx_timeout_ms: The configured RX timeout in milliseconds.
* @handle: Pointer to SCMI entity handle
* @no_completion_irq: Flag to indicate that this channel has no completion
@ -174,6 +175,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
struct scmi_chan_info {
int id;
struct device *dev;
bool is_p2a;
unsigned int rx_timeout_ms;
struct scmi_handle *handle;
bool no_completion_irq;

10
drivers/firmware/arm_scmi/driver.c
View File

@ -1048,6 +1048,11 @@ static inline void scmi_xfer_command_release(struct scmi_info *info,
static inline void scmi_clear_channel(struct scmi_info *info,
struct scmi_chan_info *cinfo)
{
if (!cinfo->is_p2a) {
dev_warn(cinfo->dev, "Invalid clear on A2P channel !\n");
return;
}
if (info->desc->ops->clear_channel)
info->desc->ops->clear_channel(cinfo);
}
@ -2638,6 +2643,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node,
if (!cinfo)
return -ENOMEM;
cinfo->is_p2a = !tx;
cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms;
/* Create a unique name for this transport device */
@ -3042,10 +3048,10 @@ static const struct scmi_desc *scmi_transport_setup(struct device *dev)
dev_info(dev, "Using %s\n", dev_driver_string(trans->supplier));
ret = of_property_read_u32(dev->of_node, "max-rx-timeout-ms",
ret = of_property_read_u32(dev->of_node, "arm,max-rx-timeout-ms",
&trans->desc->max_rx_timeout_ms);
if (ret && ret != -EINVAL)
dev_err(dev, "Malformed max-rx-timeout-ms DT property.\n");
dev_err(dev, "Malformed arm,max-rx-timeout-ms DT property.\n");
dev_info(dev, "SCMI max-rx-timeout: %dms\n",
trans->desc->max_rx_timeout_ms);

42
drivers/firmware/microchip/mpfs-auto-update.c
View File

@ -76,14 +76,11 @@
#define AUTO_UPDATE_INFO_SIZE SZ_1M
#define AUTO_UPDATE_BITSTREAM_BASE (AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_INFO_SIZE)
#define AUTO_UPDATE_TIMEOUT_MS 60000
struct mpfs_auto_update_priv {
struct mpfs_sys_controller *sys_controller;
struct device *dev;
struct mtd_info *flash;
struct fw_upload *fw_uploader;
struct completion programming_complete;
size_t size_per_bitstream;
bool cancel_request;
};
@ -156,19 +153,6 @@ static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader)
static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
int ret;
/*
* There is no meaningful way to get the status of the programming while
* it is in progress, so attempting anything other than waiting for it
* to complete would be misplaced.
*/
ret = wait_for_completion_timeout(&priv->programming_complete,
msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS));
if (!ret)
return FW_UPLOAD_ERR_TIMEOUT;
return FW_UPLOAD_ERR_NONE;
}
@ -349,33 +333,23 @@ static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader,
u32 offset, u32 size, u32 *written)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
enum fw_upload_err err = FW_UPLOAD_ERR_NONE;
int ret;
reinit_completion(&priv->programming_complete);
ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written);
if (ret) {
err = FW_UPLOAD_ERR_RW_ERROR;
goto out;
}
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
if (priv->cancel_request) {
err = FW_UPLOAD_ERR_CANCELED;
goto out;
}
if (priv->cancel_request)
return FW_UPLOAD_ERR_CANCELED;
if (mpfs_auto_update_is_bitstream_info(data, size))
goto out;
return FW_UPLOAD_ERR_NONE;
ret = mpfs_auto_update_verify_image(fw_uploader);
if (ret)
err = FW_UPLOAD_ERR_FW_INVALID;
return FW_UPLOAD_ERR_FW_INVALID;
out:
complete(&priv->programming_complete);
return err;
return FW_UPLOAD_ERR_NONE;
}
static const struct fw_upload_ops mpfs_auto_update_ops = {
@ -461,8 +435,6 @@ static int mpfs_auto_update_probe(struct platform_device *pdev)
return dev_err_probe(dev, ret,
"The current bitstream does not support auto-update\n");
init_completion(&priv->programming_complete);
fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update",
&mpfs_auto_update_ops, priv);
if (IS_ERR(fw_uploader))

17
drivers/firmware/qcom/qcom_scm.c
View File

@ -112,6 +112,7 @@ enum qcom_scm_qseecom_tz_cmd_info {
};
#define QSEECOM_MAX_APP_NAME_SIZE 64
#define SHMBRIDGE_RESULT_NOTSUPP 4
/* Each bit configures cold/warm boot address for one of the 4 CPUs */
static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
@ -216,7 +217,7 @@ static DEFINE_SPINLOCK(scm_query_lock);
struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void)
{
return __scm->mempool;
return __scm ? __scm->mempool : NULL;
}
static enum qcom_scm_convention __get_convention(void)
@ -545,7 +546,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
} else if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT,
QCOM_SCM_BOOT_SET_DLOAD_MODE)) {
ret = __qcom_scm_set_dload_mode(__scm->dev, !!dload_mode);
} else {
} else if (dload_mode) {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
}
@ -1361,6 +1362,8 @@ EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available);
int qcom_scm_shm_bridge_enable(void)
{
int ret;
struct qcom_scm_desc desc = {
.svc = QCOM_SCM_SVC_MP,
.cmd = QCOM_SCM_MP_SHM_BRIDGE_ENABLE,
@ -1373,7 +1376,15 @@ int qcom_scm_shm_bridge_enable(void)
QCOM_SCM_MP_SHM_BRIDGE_ENABLE))
return -EOPNOTSUPP;
return qcom_scm_call(__scm->dev, &desc, &res) ?: res.result[0];
ret = qcom_scm_call(__scm->dev, &desc, &res);
if (ret)
return ret;
if (res.result[0] == SHMBRIDGE_RESULT_NOTSUPP)
return -EOPNOTSUPP;
return res.result[0];
}
EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_enable);

10
drivers/rpmsg/qcom_glink_native.c
View File

@ -1440,14 +1440,18 @@ static int qcom_glink_request_intent(struct qcom_glink *glink,
goto unlock;
ret = wait_event_timeout(channel->intent_req_wq,
READ_ONCE(channel->intent_req_result) >= 0 &&
READ_ONCE(channel->intent_received),
READ_ONCE(channel->intent_req_result) == 0 ||
(READ_ONCE(channel->intent_req_result) > 0 &&
READ_ONCE(channel->intent_received)) ||
glink->abort_tx,
10 * HZ);
if (!ret) {
dev_err(glink->dev, "intent request timed out\n");
ret = -ETIMEDOUT;
} else if (glink->abort_tx) {
ret = -ECANCELED;
} else {
ret = READ_ONCE(channel->intent_req_result) ? 0 : -ECANCELED;
ret = READ_ONCE(channel->intent_req_result) ? 0 : -EAGAIN;
}
unlock:

3
drivers/soc/qcom/llcc-qcom.c
View File

@ -139,6 +139,7 @@ struct qcom_llcc_config {
int size;
bool need_llcc_cfg;
bool no_edac;
bool irq_configured;
};
struct qcom_sct_config {
@ -718,6 +719,7 @@ static const struct qcom_llcc_config x1e80100_cfg[] = {
.need_llcc_cfg = true,
.reg_offset = llcc_v2_1_reg_offset,
.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
.irq_configured = true,
},
};
@ -1345,6 +1347,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
drv_data->cfg = llcc_cfg;
drv_data->cfg_size = sz;
drv_data->edac_reg_offset = cfg->edac_reg_offset;
drv_data->ecc_irq_configured = cfg->irq_configured;
mutex_init(&drv_data->lock);
platform_set_drvdata(pdev, drv_data);

23
drivers/soc/qcom/pmic_glink.c
View File

@ -4,6 +4,7 @@
* Copyright (c) 2022, Linaro Ltd
*/
#include <linux/auxiliary_bus.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@ -13,6 +14,8 @@
#include <linux/soc/qcom/pmic_glink.h>
#include <linux/spinlock.h>
#define PMIC_GLINK_SEND_TIMEOUT (5 * HZ)
enum {
PMIC_GLINK_CLIENT_BATT = 0,
PMIC_GLINK_CLIENT_ALTMODE,
@ -112,13 +115,29 @@ EXPORT_SYMBOL_GPL(pmic_glink_client_register);
int pmic_glink_send(struct pmic_glink_client *client, void *data, size_t len)
{
struct pmic_glink *pg = client->pg;
bool timeout_reached = false;
unsigned long start;
int ret;
mutex_lock(&pg->state_lock);
if (!pg->ept)
if (!pg->ept) {
ret = -ECONNRESET;
else
} else {
start = jiffies;
for (;;) {
ret = rpmsg_send(pg->ept, data, len);
if (ret != -EAGAIN)
break;
if (timeout_reached) {
ret = -ETIMEDOUT;
break;
}
usleep_range(1000, 5000);
timeout_reached = time_after(jiffies, start + PMIC_GLINK_SEND_TIMEOUT);
}
}
mutex_unlock(&pg->state_lock);
return ret;

8
drivers/soc/qcom/socinfo.c
View File

@ -786,10 +786,16 @@ static int qcom_socinfo_probe(struct platform_device *pdev)
qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u",
SOCINFO_MAJOR(le32_to_cpu(info->ver)),
SOCINFO_MINOR(le32_to_cpu(info->ver)));
if (offsetof(struct socinfo, serial_num) <= item_size)
if (!qs->attr.soc_id || !qs->attr.revision)
return -ENOMEM;
if (offsetof(struct socinfo, serial_num) <= item_size) {
qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
"%u",
le32_to_cpu(info->serial_num));
if (!qs->attr.serial_number)
return -ENOMEM;
}
qs->soc_dev = soc_device_register(&qs->attr);
if (IS_ERR(qs->soc_dev))

2
include/linux/soc/qcom/llcc-qcom.h
View File

@ -125,6 +125,7 @@ struct llcc_edac_reg_offset {
* @num_banks: Number of llcc banks
* @bitmap: Bit map to track the active slice ids
* @ecc_irq: interrupt for llcc cache error detection and reporting
* @ecc_irq_configured: 'True' if firmware has already configured the irq propagation
* @version: Indicates the LLCC version
*/
struct llcc_drv_data {
@ -139,6 +140,7 @@ struct llcc_drv_data {
u32 num_banks;
unsigned long *bitmap;
int ecc_irq;
bool ecc_irq_configured;
u32 version;
};