bnxt_en: stop packet flow during bnxt_queue_stop/start

The current implementation when resetting a queue while packets are
flowing puts the queue into an inconsistent state.

There needs to be some synchronisation with the FW. Add calls to
bnxt_hwrm_vnic_update() to set the MRU for both the default and ntuple
vnic during queue start/stop. When the MRU is set to 0, flow is stopped.
Each Rx queue belongs to either the default or the ntuple vnic.

With calling bnxt_hwrm_vnic_update() the calls to napi_enable() and
napi_disable() must be removed for reset to work on a queue that has
active traffic flowing e.g. iperf3.

Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David Wei 2024-08-07 22:15:17 -07:00 committed by David S. Miller
parent d41575f76a
commit b9d2956e86

View File

@ -15177,7 +15177,8 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx)
struct bnxt *bp = netdev_priv(dev);
struct bnxt_rx_ring_info *rxr, *clone;
struct bnxt_cp_ring_info *cpr;
int rc;
struct bnxt_vnic_info *vnic;
int i, rc;
rxr = &bp->rx_ring[idx];
clone = qmem;
@ -15202,11 +15203,16 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx)
if (bp->flags & BNXT_FLAG_AGG_RINGS)
bnxt_db_write(bp, &rxr->rx_agg_db, rxr->rx_agg_prod);
napi_enable(&rxr->bnapi->napi);
cpr = &rxr->bnapi->cp_ring;
cpr->sw_stats->rx.rx_resets++;
for (i = 0; i <= BNXT_VNIC_NTUPLE; i++) {
vnic = &bp->vnic_info[i];
vnic->mru = bp->dev->mtu + ETH_HLEN + VLAN_HLEN;
bnxt_hwrm_vnic_update(bp, vnic,
VNIC_UPDATE_REQ_ENABLES_MRU_VALID);
}
return 0;
err_free_hwrm_rx_ring:
@ -15218,9 +15224,17 @@ static int bnxt_queue_stop(struct net_device *dev, void *qmem, int idx)
{
struct bnxt *bp = netdev_priv(dev);
struct bnxt_rx_ring_info *rxr;
struct bnxt_vnic_info *vnic;
int i;
for (i = 0; i <= BNXT_VNIC_NTUPLE; i++) {
vnic = &bp->vnic_info[i];
vnic->mru = 0;
bnxt_hwrm_vnic_update(bp, vnic,
VNIC_UPDATE_REQ_ENABLES_MRU_VALID);
}
rxr = &bp->rx_ring[idx];
napi_disable(&rxr->bnapi->napi);
bnxt_hwrm_rx_ring_free(bp, rxr, false);
bnxt_hwrm_rx_agg_ring_free(bp, rxr, false);
rxr->rx_next_cons = 0;