net: pcs: xpcs: move Wangxun VR_XS_PCS_DIG_CTRL1 configuration

According to commits 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs
for SGMII mode") and 2deea43f386d ("net: pcs: xpcs: add 1000BASE-X AN
interrupt support"), Wangxun devices need special VR_XS_PCS_DIG_CTRL1
settings for SGMII and 1000BASE-X. Both SGMII and 1000BASE-X use the
same settings.

Rather than placing these in the individual xpcs_config_*() functions,
move it to where we already test for the Wangxun devices in
xpcs_do_config().

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Russell King (Oracle) 2024-10-04 11:21:42 +01:00 committed by David S. Miller
parent 5ba5619303
commit bb0b8aeca6

View File

@ -636,9 +636,6 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
int ret, mdio_ctrl, tx_conf;
u16 mask, val;
if (xpcs->info.pma == WX_TXGBE_XPCS_PMA_10G_ID)
xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_CL37_BP | DW_EN_VSMMD1);
/* For AN for C37 SGMII mode, the settings are :-
* 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
it is already enabled)
@ -714,9 +711,6 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
bool changed = 0;
u16 mask, val;
if (xpcs->info.pma == WX_TXGBE_XPCS_PMA_10G_ID)
xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_CL37_BP | DW_EN_VSMMD1);
/* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must
* be disabled first:-
* 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b
@ -806,6 +800,14 @@ static int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
ret = txgbe_xpcs_switch_mode(xpcs, interface);
if (ret)
return ret;
/* Wangxun devices need backplane CL37 AN enabled for
* SGMII and 1000base-X
*/
if (interface == PHY_INTERFACE_MODE_SGMII ||
interface == PHY_INTERFACE_MODE_1000BASEX)
xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1,
DW_CL37_BP | DW_EN_VSMMD1);
}
switch (compat->an_mode) {