From 1a1d6db23ddacde0b15ea589e9103373e05af8de Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 9 Sep 2020 15:30:57 -0500 Subject: [PATCH 1/7] i2c: aspeed: Mask IRQ status to relevant bits Mask the IRQ status to only the bits that the driver checks. This prevents excessive driver warnings when operating in slave mode when additional bits are set that the driver doesn't handle. Signed-off-by: Eddie James Reviewed-by: Tao Ren Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-aspeed.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 31268074c422..724bf30600d6 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -69,6 +69,7 @@ * These share bit definitions, so use the same values for the enable & * status bits. */ +#define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) #define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7) @@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE, bus->base + ASPEED_I2C_INTR_STS_REG); readl(bus->base + ASPEED_I2C_INTR_STS_REG); + irq_received &= ASPEED_I2CD_INTR_RECV_MASK; irq_remaining = irq_received; #if IS_ENABLED(CONFIG_I2C_SLAVE) From 66d402e2e9455cf0213c42b97f22a0493372d7cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Volker=20R=C3=BCmelin?= Date: Tue, 1 Sep 2020 15:22:21 +0200 Subject: [PATCH 2/7] i2c: i801: Fix resume bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On suspend the original host configuration gets restored. The resume routine has to undo this, otherwise the SMBus master may be left in disabled state or in i2c mode. [JD: Rebased on v5.8, moved the write into i801_setup_hstcfg.] Signed-off-by: Volker Rümelin Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org --- drivers/i2c/busses/i2c-i801.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e32ef3f01fe8..22597fa415f1 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1709,6 +1709,16 @@ static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } static inline void i801_acpi_remove(struct i801_priv *priv) { } #endif +static unsigned char i801_setup_hstcfg(struct i801_priv *priv) +{ + unsigned char hstcfg = priv->original_hstcfg; + + hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ + hstcfg |= SMBHSTCFG_HST_EN; + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); + return hstcfg; +} + static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned char temp; @@ -1830,14 +1840,10 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) return err; } - pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp); - priv->original_hstcfg = temp; - temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ - if (!(temp & SMBHSTCFG_HST_EN)) { + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg); + temp = i801_setup_hstcfg(priv); + if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN)) dev_info(&dev->dev, "Enabling SMBus device\n"); - temp |= SMBHSTCFG_HST_EN; - } - pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); if (temp & SMBHSTCFG_SMB_SMI_EN) { dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); @@ -1963,6 +1969,7 @@ static int i801_resume(struct device *dev) { struct i801_priv *priv = dev_get_drvdata(dev); + i801_setup_hstcfg(priv); i801_enable_host_notify(&priv->adapter); return 0; From 811a6e18a8633ef66c6c9bad09f359dd9daa9ec1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 1 Sep 2020 15:28:37 +0200 Subject: [PATCH 3/7] i2c: i801: Simplify the suspend callback We don't actually need to derive the PCI device from the device structure, as we already have a pointer to it in our private data structure. Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-i801.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 22597fa415f1..ebb4c0b03057 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1958,10 +1958,9 @@ static void i801_shutdown(struct pci_dev *dev) #ifdef CONFIG_PM_SLEEP static int i801_suspend(struct device *dev) { - struct pci_dev *pci_dev = to_pci_dev(dev); - struct i801_priv *priv = pci_get_drvdata(pci_dev); + struct i801_priv *priv = dev_get_drvdata(dev); - pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); return 0; } From 21653a4181ff292480599dad996a2b759ccf050f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 9 Sep 2020 12:32:33 +0200 Subject: [PATCH 4/7] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 5ec082e2039d..573b5da145d1 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1464,8 +1464,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap) /* create pre-declared device nodes */ of_i2c_register_devices(adap); - i2c_acpi_register_devices(adap); i2c_acpi_install_space_handler(adap); + i2c_acpi_register_devices(adap); if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap); From ff6f3aff46beb3c29e0802cffcc559e1756c4814 Mon Sep 17 00:00:00 2001 From: Qii Wang Date: Thu, 17 Sep 2020 19:55:41 +0800 Subject: [PATCH 5/7] i2c: mediatek: Fix generic definitions for bus frequency The max frequency of mediatek i2c controller driver is I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ. Fix it. Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies") Reviewed-by: Yingjoe Chen Reviewed-by: Andy Shevchenko Signed-off-by: Qii Wang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index efc14041d45b..a1978ebd8177 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -681,8 +681,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src, unsigned int cnt_mul; int ret = -EINVAL; - if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) - target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ; + if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ) + target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ; max_step_cnt = mtk_i2c_max_step_cnt(target_speed); base_step_cnt = max_step_cnt; From b44658e755b5a733e9df04449facbc738df09170 Mon Sep 17 00:00:00 2001 From: Qii Wang Date: Thu, 17 Sep 2020 19:55:42 +0800 Subject: [PATCH 6/7] i2c: mediatek: Send i2c master code at more than 1MHz The master code needs to being sent when the speed is more than I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the latest I2C-bus specification and user manual. Signed-off-by: Qii Wang Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index a1978ebd8177..0cbdfbe605b5 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -759,7 +759,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) for (clk_div = 1; clk_div <= max_clk_div; clk_div++) { clk_src = parent_clk / clk_div; - if (target_speed > I2C_MAX_FAST_MODE_FREQ) { + if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) { /* Set master code speed register */ ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ, From 6eb158ec0a45dbfd98bc6971c461b7d4d5bf61b3 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Fri, 11 Sep 2020 17:01:39 +0200 Subject: [PATCH 7/7] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"), but i2c-mxs was not updated to use the new flag, completely breaking I2C transactions using DMA. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Matthias Schiffer Reviewed-by: Fabio Estevam Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 9587347447f0..c4b08a924461 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -25,6 +25,7 @@ #include #include #include +#include #define DRIVER_NAME "mxs-i2c" @@ -200,7 +201,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_PREP_INTERRUPT | + MXS_DMA_CTRL_WAIT4END); if (!desc) { dev_err(i2c->dev, "Failed to get DMA data write descriptor.\n"); @@ -228,7 +230,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_PREP_INTERRUPT | + MXS_DMA_CTRL_WAIT4END); if (!desc) { dev_err(i2c->dev, "Failed to get DMA data write descriptor.\n"); @@ -260,7 +263,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_PREP_INTERRUPT | + MXS_DMA_CTRL_WAIT4END); if (!desc) { dev_err(i2c->dev, "Failed to get DMA data write descriptor.\n");