USB fixes for 6.11-rc6

Here are some small USB fixes for 6.11-rc6.  Included in here are:
   - dwc3 driver fixes for reported issues
   - MAINTAINER file update, marking a driver as unsupported :(
   - cdnsp driver fixes
   - USB gadget driver fix
   - USB sysfs fix
   - other tiny fixes
   - new device ids for usb serial driver
 
 All of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZtNVTw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymqWwCgmITg5Owdigw+ejnkLJ4Q/CHYfRkAoLh7nkcm
 kaX7IqZLgVDr4rvgVcmR
 =azoE
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.11-rc6.  Included in here are:

   - dwc3 driver fixes for reported issues

   - MAINTAINER file update, marking a driver as unsupported :(

   - cdnsp driver fixes

   - USB gadget driver fix

   - USB sysfs fix

   - other tiny fixes

   - new device ids for usb serial driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add MeiG Smart SRM825L
  usb: cdnsp: fix for Link TRB with TC
  usb: dwc3: st: add missing depopulate in probe error path
  usb: dwc3: st: fix probed platform device ref count on probe error path
  usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
  usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
  usb: typec: fsa4480: Relax CHIP_ID check
  usb: dwc3: xilinx: add missing depopulate in probe error path
  usb: dwc3: omap: add missing depopulate in probe error path
  dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
  usb: gadget: uvc: queue pump work in uvcg_video_enable()
  cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
  usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
  usb: dwc3: core: Prevent USB core invalid event buffer address access
  MAINTAINERS: Mark UVC gadget driver as orphan

Documentation/devicetree/bindings/usb/microchip,usb2514.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: usb-hcd.yaml#
+  - $ref: usb-device.yaml#
 
 properties:
   compatible:
@@ -36,6 +36,13 @@ required:
   - compatible
   - reg
 
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+    additionalProperties: true
+
 unevaluatedProperties: false
 
 examples:

MAINTAINERS

@@ -23848,10 +23848,8 @@ F:	drivers/media/usb/uvc/
 F:	include/uapi/linux/uvcvideo.h
 
 USB WEBCAM GADGET
-M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-M:	Daniel Scally <dan.scally@ideasonboard.com>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/gadget/function/*uvc*
 F:	drivers/usb/gadget/legacy/webcam.c
 F:	include/uapi/linux/usb/g_uvc.h

drivers/usb/cdns3/cdnsp-gadget.h

@@ -811,6 +811,7 @@ struct cdnsp_stream_info {
  *        generate Missed Service Error Event.
  *        Set skip flag when receive a Missed Service Error Event and
  *        process the missed tds on the endpoint ring.
+ * @wa1_nop_trb: hold pointer to NOP trb.
  */
 struct cdnsp_ep {
 	struct usb_ep endpoint;
@@ -838,6 +839,8 @@ struct cdnsp_ep {
 #define EP_UNCONFIGURED		BIT(7)
 
 	bool skip;
+	union cdnsp_trb	 *wa1_nop_trb;
+
 };
 
 /**

drivers/usb/cdns3/cdnsp-ring.c

@@ -402,7 +402,7 @@ static u64 cdnsp_get_hw_deq(struct cdnsp_device *pdev,
 	struct cdnsp_stream_ctx *st_ctx;
 	struct cdnsp_ep *pep;
 
-	pep = &pdev->eps[stream_id];
+	pep = &pdev->eps[ep_index];
 
 	if (pep->ep_state & EP_HAS_STREAMS) {
 		st_ctx = &pep->stream_info.stream_ctx_array[stream_id];
@@ -1904,6 +1904,23 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 	if (ret)
 		return ret;
 
+	/*
+	 * workaround 1: STOP EP command on LINK TRB with TC bit set to 1
+	 * causes that internal cycle bit can have incorrect state after
+	 * command complete. In consequence empty transfer ring can be
+	 * incorrectly detected when EP is resumed.
+	 * NOP TRB before LINK TRB avoid such scenario. STOP EP command is
+	 * then on NOP TRB and internal cycle bit is not changed and have
+	 * correct value.
+	 */
+	if (pep->wa1_nop_trb) {
+		field = le32_to_cpu(pep->wa1_nop_trb->trans_event.flags);
+		field ^= TRB_CYCLE;
+
+		pep->wa1_nop_trb->trans_event.flags = cpu_to_le32(field);
+		pep->wa1_nop_trb = NULL;
+	}
+
 	/*
 	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
 	 * until we've finished creating all the other TRBs. The ring's cycle
@@ -1999,6 +2016,17 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 		send_addr = addr;
 	}
 
+	if (cdnsp_trb_is_link(ring->enqueue + 1)) {
+		field = TRB_TYPE(TRB_TR_NOOP) | TRB_IOC;
+		if (!ring->cycle_state)
+			field |= TRB_CYCLE;
+
+		pep->wa1_nop_trb = ring->enqueue;
+
+		cdnsp_queue_trb(pdev, ring, 0, 0x0, 0x0,
+				TRB_INTR_TARGET(0), field);
+	}
+
 	cdnsp_check_trb_math(preq, enqd_len);
 	ret = cdnsp_giveback_first_trb(pdev, pep, preq->request.stream_id,
 				       start_cycle, start_trb);

drivers/usb/class/cdc-acm.c

@@ -1761,6 +1761,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
 	.driver_info = SINGLE_RX_URB,
 	},
+	{ USB_DEVICE(0x1901, 0x0006), /* GE Healthcare Patient Monitor UI Controller */
+	.driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */
+	},
 	{ USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},

drivers/usb/core/sysfs.c

@@ -670,6 +670,7 @@ static int add_power_attributes(struct device *dev)
 
 static void remove_power_attributes(struct device *dev)
 {
+	sysfs_unmerge_group(&dev->kobj, &usb3_hardware_lpm_attr_group);
 	sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group);
 	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
 }

drivers/usb/dwc3/core.c

@@ -564,9 +564,17 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
 void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 {
 	struct dwc3_event_buffer	*evt;
+	u32				reg;
 
 	if (!dwc->ev_buf)
 		return;
+	/*
+	 * Exynos platforms may not be able to access event buffer if the
+	 * controller failed to halt on dwc3_core_exit().
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	if (!(reg & DWC3_DSTS_DEVCTRLHLT))
+		return;
 
 	evt = dwc->ev_buf;
 

drivers/usb/dwc3/dwc3-omap.c

@@ -522,11 +522,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dev, "failed to request IRQ #%d --> %d\n",
 			omap->irq, ret);
-		goto err1;
+		goto err2;
 	}
 	dwc3_omap_enable_irqs(omap);
 	return 0;
 
+err2:
+	of_platform_depopulate(dev);
 err1:
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);

drivers/usb/dwc3/dwc3-st.c

@@ -219,10 +219,8 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	dwc3_data->regmap = regmap;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "syscfg-reg");
-	if (!res) {
-		ret = -ENXIO;
-		goto undo_platform_dev_alloc;
-	}
+	if (!res)
+		return -ENXIO;
 
 	dwc3_data->syscfg_reg_off = res->start;
 
@@ -233,8 +231,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 		devm_reset_control_get_exclusive(dev, "powerdown");
 	if (IS_ERR(dwc3_data->rstc_pwrdn)) {
 		dev_err(&pdev->dev, "could not get power controller\n");
-		ret = PTR_ERR(dwc3_data->rstc_pwrdn);
-		goto undo_platform_dev_alloc;
+		return PTR_ERR(dwc3_data->rstc_pwrdn);
 	}
 
 	/* Manage PowerDown */
@@ -269,7 +266,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	if (!child_pdev) {
 		dev_err(dev, "failed to find dwc3 core device\n");
 		ret = -ENODEV;
-		goto err_node_put;
+		goto depopulate;
 	}
 
 	dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
@@ -285,6 +282,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	ret = st_dwc3_drd_init(dwc3_data);
 	if (ret) {
 		dev_err(dev, "drd initialisation failed\n");
+		of_platform_depopulate(dev);
 		goto undo_softreset;
 	}
 
@@ -294,14 +292,14 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dwc3_data);
 	return 0;
 
+depopulate:
+	of_platform_depopulate(dev);
 err_node_put:
 	of_node_put(child);
 undo_softreset:
 	reset_control_assert(dwc3_data->rstc_rst);
 undo_powerdown:
 	reset_control_assert(dwc3_data->rstc_pwrdn);
-undo_platform_dev_alloc:
-	platform_device_put(pdev);
 	return ret;
 }
 

drivers/usb/dwc3/dwc3-xilinx.c

@@ -327,9 +327,14 @@ static int dwc3_xlnx_probe(struct platform_device *pdev)
 		goto err_pm_set_suspended;
 
 	pm_suspend_ignore_children(dev, false);
-	return pm_runtime_resume_and_get(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		goto err_pm_set_suspended;
+
+	return 0;
 
 err_pm_set_suspended:
+	of_platform_depopulate(dev);
 	pm_runtime_set_suspended(dev);
 
 err_clk_put:

drivers/usb/dwc3/ep0.c

@@ -232,7 +232,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
 	__dwc3_gadget_ep_set_halt(dep, 1, false);
-	dep->flags = DWC3_EP_ENABLED;
+	dep->flags &= DWC3_EP_RESOURCE_ALLOCATED;
+	dep->flags |= DWC3_EP_ENABLED;
 	dwc->delayed_status = false;
 
 	if (!list_empty(&dep->pending_list)) {

drivers/usb/gadget/function/uvc_video.c

@@ -753,6 +753,7 @@ int uvcg_video_enable(struct uvc_video *video)
 	video->req_int_count = 0;
 
 	uvc_video_ep_queue_initial_requests(video);
+	queue_work(video->async_wq, &video->pump);
 
 	return ret;
 }

drivers/usb/serial/option.c

@@ -619,6 +619,8 @@ static void option_instat_callback(struct urb *urb);
 
 /* MeiG Smart Technology products */
 #define MEIGSMART_VENDOR_ID			0x2dee
+/* MeiG Smart SRM825L based on Qualcomm 315 */
+#define MEIGSMART_PRODUCT_SRM825L		0x4d22
 /* MeiG Smart SLM320 based on UNISOC UIS8910 */
 #define MEIGSMART_PRODUCT_SLM320		0x4d41
 
@@ -2366,6 +2368,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/typec/mux/fsa4480.c

@@ -274,7 +274,7 @@ static int fsa4480_probe(struct i2c_client *client)
 		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
 
 	ret = regmap_read(fsa->regmap, FSA4480_DEVICE_ID, &val);
-	if (ret || !val)
+	if (ret)
 		return dev_err_probe(dev, -ENODEV, "FSA4480 not found\n");
 
 	dev_dbg(dev, "Found FSA4480 v%lu.%lu (Vendor ID = %lu)\n",