From edd3e620ab15e66b0d5477dc3bd4732a2b3baddb Mon Sep 17 00:00:00 2001 From: Kamal Dasu Date: Tue, 21 May 2019 10:44:21 -0400 Subject: [PATCH] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional nand-ecc-strength and nand-ecc-step-size can be made optional as brcmnand driver can support using raw NAND layer detected values. Signed-off-by: Kamal Dasu Reviewed-by: Rob Herring Signed-off-by: Miquel Raynal --- Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 0b7c3738b66c..0d952afa635d 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -101,10 +101,10 @@ Required properties: number (e.g., 0, 1, 2, etc.) - #address-cells : see partition.txt - #size-cells : see partition.txt -- nand-ecc-strength : see nand-controller.yaml -- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml Optional properties: +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml - nand-on-flash-bbt : boolean, to enable the on-flash BBT for this chip-select. See nand-controller.yaml - brcm,nand-oob-sector-size : integer, to denote the spare area sector size