make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-a4tech.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-apple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-aureal.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-belkin.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-betopff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-bigbenff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-cherry.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-chicony.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-cypress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-dr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-emsff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-elecom.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-elo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-evision.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-ezkey.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-vivaldi-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-google-hammer.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-google-stadiaff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-gyration.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-holtek-kbd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-holtek-mouse.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-ite.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-kensington.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-keytouch.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-kye.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-lcpower.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-lenovo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-logitech.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-magicmouse.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-maltron.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-mf.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-megaworld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-microsoft.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-monterey.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-ntrig.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-ortek.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-prodikeys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-pl.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-petalynx.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-primax.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-razer.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-redragon.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-retrode.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-saitek.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-samsung.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-semitek.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-sjoy.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-sony.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-speedlink.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-steam.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-steelseries.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-sunplus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-gaff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-tmff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-tivo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-topseed.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-twinhan.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-uclogic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-xinmo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-zpff.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-zydacron.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-viewsonic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-waltop.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-winwing.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Note: All HID drivers that had explicit entries in the MAINTAINERS
file were fixed individually. This patch fixes all remaining HID
drivers that fall under the generic "HID CORE LAYER" entry in the
MAINTAINERS file. Almost all descriptions were taken from the header
comment in each file.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240604-md-hid-misc-v1-1-4f9560796f3c@quicinc.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether
the previous wheel report was horizontal or vertical. Before
c01908a14b ("HID: input: add mapping for "Toggle Display" key") this
usage was being mapped to 'Relative.Misc'. After the patch it's simply
ignored (usage->type == 0 & usage->code == 0). Which ultimately makes
hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no
usage->type.
We shouldn't rely on a mapping for that usage as it's nonstandard and
doesn't really map to an input event. So we bypass the mapping and make
sure the custom event handling properly handles both reports.
Fixes: c01908a14b ("HID: input: add mapping for "Toggle Display" key")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- regression fixes (reverts) for module loading changes that turned out
to be incompatible with some userspace, from Benjamin Tissoires
- regression fix for special Logitech unifiying receiver 0xc52f, from
Hans de Goede
- a few device ID additions to logitech driver, from Hans de Goede
- fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix 064d:c52f receiver support
Revert "HID: core: Call request_module before doing device_add"
Revert "HID: core: Do not call request_module() in async context"
Revert "HID: Increase maximum report size allowed by hid_field_extract()"
HID: a4tech: fix horizontal scrolling
HID: hyperv: Add a module description line
HID: logitech-hidpp: Add support for the S510 remote control
HID: multitouch: handle faulty Elo touch device
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
HID: wacom: Don't report anything prior to the tool entering range
HID: wacom: Don't set tool type until we're in range
HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
HID: logitech-hidpp: add support for the MX5500 keyboard
HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
HID: i2c-hid: add iBall Aer3 to descriptor override
Since recent high resolution scrolling changes the A4Tech driver must
check for the "REL_WHEEL_HI_RES" usage code.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203369
Fixes: 2dc702c991 ("HID: input: use the Resolution Multiplier for high-resolution scrolling")
Signed-off-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is safe to use devres allocation within the hid subsystem:
- the devres release is called _after_ the call to .remove(), meaning
that no freed pointers will exists while removing the device
- if a .probe() fails, devres releases all the allocated ressources
before going to the next driver: there will not be ghost ressources
attached to a hid device if several drivers are probed.
Given that, we can clean up a little some of the HID drivers. These ones
are trivial:
- there is only one kzalloc in the driver
- the .remove() callback contains only one kfree on top of hid_hw_stop()
- the error path in the probe is easy enough to be manually checked
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the new module_hid_driver macro in all HID drivers that have
a simple register/unregister init/exit.
This also converts the hid drivers that test for a failure of
hid_register_driver() and report the failure. Using module_hid_driver
in those drivers removes the failure message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Paul Walmsley has implemented dynamic quirk handling back in 2007 through
commits:
2eb5dc30eb ("USB HID: encapsulate quirk handling into hid-quirks.c")
8222fbe67c ("USB HID: clarify static quirk handling as squirks")
8cef908235 ("USB HID: add support for dynamically-created quirks")
876b9276b9 ("USB HID: add 'quirks' module parameter")
and as such, his copyright rightly belongs to
drivers/hid/usbhid/hid-quirks.c file.
However when generic HID code has been converted to bus and individual
quirks separated out to individual drivers on the bus, the copyright has
been blindly transfered into all the tiny drivers, which actually don't
contain any of Pauls' copyrighted code.
Remove the copyright from those sub-drivers.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Paul Walmsley <paul@pwsan.com>
Neaten current uses of dev_<level> by adding and using
hid specific hid_<level> macros.
Convert existing uses of dev_<level> uses to hid_<level>.
Convert hid-pidff printk uses to hid_<level>.
Remove err_hid and use hid_err instead.
Add missing newlines to logging messages where necessary.
Coalesce format strings.
Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Other miscellaneous changes:
Add const struct hid_device * argument to hid-core functions
extract() and implement() so hid_<level> can be used by them.
Fix bad indentation in hid-core hid_input_field function
that calls extract() function above.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions of several HID drivers from drivers/hid/
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This removal was scheduled and there is no problem with later
distros to adapt for the new bus, thanks to aliases.
module-init-tools map files are deprecated nowadays, so that
the patch which introduced hid ones into the m-i-t won't be
accepted and hence there is no reason for leaving compat stuff in.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
