asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Some 3rd party gamepads expect updates to rumble and lightbar together,
and setting one may cancel the other.
Let's maximise compatibility by always sending rumble and lightbar
updates together, even when only one has been scheduled.
Further background reading:
- Apparently the PS4 always sends rumble and lightbar updates together:
https://eleccelerator.com/wiki/index.php?title=DualShock_4#0x11_2
- 3rd party gamepads may not implement lightbar_blink, and may simply
ignore updates with 0x07 set, according to:
https://github.com/Ryochan7/DS4Windows/pull/1839
[jkosina@suse.com: fix shortlog]
Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The logic in dualshock4_get_calibration_data() used uninitialised data
in case of a failed kzalloc() for the transfer buffer.
The solution is to group all business logic and all sanity checks
together, and jump only to the latter in case of an error.
While we're at it, factor out the axes' labelling, since it must happen
either way for input_report_abs() to succeed later on.
Thanks to Dan Carpenter for the Smatch static checker warning.
Fixes: a48a7cd85f55 ("HID: playstation: DS4: Don't fail on calibration data request")
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Distinguish PS4/PS5 type controllers using .driver_data in
MODULE_DEVICE_TABLE rather than by VID/PID.
This allows adding compatible controllers with different VID/PID.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers never switch to the full 0x11 report.
They keep sending the short 0x01 report, so let's parse that instead.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers can't report calibration data for the
gyro/accelerometer.
We can still use the gamepad as-is, so let's do that.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers can't report firmware/hardware version.
Unlike for the DualSense, the driver does not use these values for
anything in the DualShock 4 case, but merely exposes them via sysfs.
They will simply be 0x0.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There was no way to disable blinking once enabled.
Disable it on brightness = 0, as per the Linux LED spec.
The driver reports back the values it sends to the controller, but they
need to be scaled back to milliseconds. Setting the LED blinking via
sysfs works as expected now.
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The bias for the gyroscope is not used correctly. The sensor bias
needs to be used in calculation of the 'sensivity' instead of being
an offset.
In practice this has little input on the values as the bias values
tends to be small (+/- 20).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The bias for the gyroscope is not used correctly. The sensor bias
needs to be used in calculation of the 'sensivity' instead of being
an offset.
In practice this has little input on the values as the bias values
tends to be small (+/- 20).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some DualShock4 devices report invalid calibration data resulting
in kernel oopses due to division by zero during report handling.
The devices affected generally appear to be clone devices, which don't
implement all reports properly and don't populate proper calibration
data. The issue may have been seen on an official device with erased
calibration reports.
This patch prevents the crashes by essentially disabling calibration
when invalid values are detected.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Tested-by: Alain Carlucci <alain.carlucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The 'buf' variable is only used in the USB (if-path) and not in the Bluetooth
else-path. Since it is not set to NULL. this results in freeing an uninitialized
pointer. Since the else code-path doesn't need buf, just return 0.
Fixes: 2d77474a2392 ("HID: playstation: add DualShock4 bluetooth support.")
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221213044935.1775499-2-roderick.colenbrander@sony.com
The driver was by accident reading the CRC directly from a hardware
structure instead of using get_unaligned_le32.
Fixes: 2d77474a2392 ("HID: playstation: add DualShock4 bluetooth support.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The size of the output buffer used for output reports was not updated
to the larger size needed for Bluetooth. This ultimately resulted
in memory corruption of surrounding structures e.g. due to memsets.
Fixes: 2d77474a2392 ("HID: playstation: add DualShock4 bluetooth support.")
Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the DualShock4 dongle in a very similar
way we contributed to hid-sony before.
The dongle is a USB to Bluetooth bridge and uses the same HID reports
as a USB device. It reports data through the DS4's main USB input
report independent on whether a Bluetooth controller is connected.
For this reason there is custom dongle report parsing code to
detect controller hotplug and kick of calibration work until we
are ready to process actual input reports.
The logic also incorporates a workaround needed for Steam in which
hid-playstation and Steam using hidraw can fight.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The poll interval for DualShock4 in Bluetooth mode is adjustable
through the main output report. Configure it to 4ms, which is
similar to USB.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for DualShock4 in Bluetooth mode. In Bluetooth, the device
is a bit strange in that after 'calibration' it switches sending all its
input data from a basic report (only containing buttons/sticks) to an
extended report, which also contains touchpad, motion sensors and other
data. The overall design of this code is similar to the DualSense code.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds a parameter to ps_get_report to ignore CRC checks.
This prepares for DualShock4, which has some HID reports, which lack CRC.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Expose the lightbar LEDs in the same manner as hid-sony through
individual LEDs for backwards compatibility reasons. There is a
slight change in LED naming to use the input device name as opposed
to the MAC address like hid-sony did. This is expected to not
cause any issues and should make the naming more compliant.
In addition set a default lightbar color based on player ID.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the max_brightness adjustable through ps_led_info struct. This
paves the way for a next DualShock4 patch to allow larger brightness
values.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch implements DualShock4 rumble support in a similar manner
as the DualSense implementation. It adds an output worker with
granular control of different features of the main DualShock4 output
report.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support accelerometer and gyroscope as separate input devices similar
how DualSense and hid-sony do it.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support the DualShock4 touchpad as a separate input device. The code
describes the touchpad input reports through structures similar a bit
to the DualSense code.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Provide DualShock4 battery support through powersupply framework.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Report DualShock4 hardware and firmware version info through sysfs.
It uses the same sysfs nodes as the DualSense did (and hid-sony).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add basic support for DualShock4 USB controller with buttons and sticks.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Newer DualSense firmware supports a revised classic rumble mode,
which feels more similar to rumble as supported on previous PlayStation
controllers. It has been made the default on PlayStation and non-PlayStation
devices now (e.g. iOS and Windows). Default to this new mode when
supported.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-4-roderick.colenbrander@sony.com
Provide initial support for the DualSense Edge controller. The brings
support up to the level of the original DualSense, but won't yet provide
support for new features (e.g. reprogrammable buttons).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-3-roderick.colenbrander@sony.com
Ensure we don't schedule any new output work on removal and wait
for any existing work to complete. If we don't do this e.g. rumble
work can get queued during deletion and we trigger a kernel crash.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-2-roderick.colenbrander@sony.com
There is no need for a driver to individually add/create device groups,
the driver core will do it automatically for you. Convert the
hid-playstation driver to use the dev_groups pointer instead of manually
calling the driver core to create the group and have it be cleaned up
later on by the devm core.
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
brightness_set_blocking() callback expects function returning int. This fixes
the follwoing build failure:
drivers/hid/hid-playstation.c: In function ‘dualsense_player_led_set_brightness’:
drivers/hid/hid-playstation.c:885:1: error: no return statement in function returning non-void [-Werror=return-type]
}
^
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualSense player LEDs were so far not adjustable from user-space.
This patch exposes each LED individually through the LED class. Each
LED uses the new 'player' function resulting in a name like:
'inputX:white:player-1' for the first LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualSense lightbar has so far been supported, but it was not yet
adjustable from user space. This patch exposes it through a multi-color
LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualSense features 5 player LEDs below its touchpad, which are
meant as player id indications. The LEDs are configured with a
player ID determined by an ID allocator, which assign player ids
to ps_device instances.
This patch is a combination of the following original patches
minus use of LED framework APIs:
- HID: playstation: add DualSense player LEDs support.
- HID: playstation: DualSense set LEDs to default player id.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense controller has a built-in microphone exposed as an
audio device over USB (or HID using Bluetooth). A dedicated
button on the controller handles mute, but software has to configure
the device to mute the audio stream.
This patch captures the mute button and schedules an output report
to mute/unmute the audio stream as well as toggle the mute LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Provide initial support for the DualSense lightbar and configure it
with a default PlayStation blue color.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The comparison of value with the array size ps_gamepad_hat_mapping
appears to be off-by-one. Fix this by using >= rather than > for the
size comparison.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: bc2e15a9a022 ("HID: playstation: initial DualSense USB support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The ret variable in ps_battery_get_property is set in an error path,
but never actually returned. Change the function to return ret.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Retrieve DualSense hardware and firmware information using a vendor
specific feature report. Report the data through sysfs and also
report using hid_info as there can be signficant differences between
versions.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense features a haptics system based on voicecoil motors,
which requires PCM data (or special HID packets using Bluetooth). There
is no appropriate API yet in the Linux kernel to expose these. The
controller also provides a classic rumble feature for backwards
compatibility. Expose this classic rumble feature using the FF framework.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch adds support for the DualSense when operating in Bluetooth mode.
The device has the same behavior as the DualShock 4 in that by default it
sends a limited input report (0x1), but after requesting calibration data,
it switches to an extended input report (report 49), which adds data for
touchpad, motion sensors, battery and more.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Track devices in a list, so we can detect when a device is connected
twice when using Bluetooth and USB.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense features an accelerometer and gyroscope. The data is
embedded into the main HID input reports. Expose both sensors through
through a separate evdev node.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Implement support for DualSense touchpad as a separate input device.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Report DualSense battery status information through power_supply class.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Use the DualSense MAC address as a unique identifier for the HID device.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
