The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a new operation qcom_hwspinlock_bust() which can be invoked
to bust any locks that are in use when a remoteproc is stopped or
crashed.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-2-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
Signed-off-by: Richard Maina <quic_rmaina@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For loops with multiple initializers and increments are hard to read
and reason about, simplify this by using the looping index to index
into the hwspinlock array.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240208165114.63148-4-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This will unregister the HW spinlock on module exit automatically for us,
currently we manually unregister which can be error-prone if not done in
the right order. This also allows us to remove the remove callback.
Do that here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240208165114.63148-3-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This disables runtime PM on module exit automatically for us, currently
we manually disable runtime PM which can be error-prone if not done
in the right order or missed in some exit path. This also allows us
to simplify the probe exit path and remove callbacks. Do that here.
While here, as we can now return right after registering our hwspinlock,
simply return directly and remove the extra debug message.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240208165114.63148-2-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We do not use the OF node anymore, nor does it matter how
we got to probe, so remove the check for of_node.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240208165114.63148-1-afd@ti.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct function comments to prevent kernel-doc warnings
found when using "W=1".
hwspinlock_core.c:208: warning: Excess function parameter 'timeout' description in '__hwspin_lock_timeout'
hwspinlock_core.c:318: warning: Excess function parameter 'bank' description in 'of_hwspin_lock_simple_xlate'
hwspinlock_core.c:647: warning: Function parameter or member 'hwlock' not described in '__hwspin_lock_request'
and 17 warnings like:
hwspinlock_core.c:487: warning: No description found for return value of 'hwspin_lock_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: linux-remoteproc@vger.kernel.org
Link: https://lore.kernel.org/r/20231206055439.671-1-rdunlap@infradead.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ6018 has 32 tcsr_mutex hwlock registers with stride 0x1000.
The compatible string qcom,ipq6018-tcsr-mutex is mapped to
of_msm8226_tcsr_mutex which has 32 locks configured with stride of 0x80
and doesn't match the HW present in IPQ6018.
Remove IPQ6018 specific compatible string so that it fallsback to
of_tcsr_mutex data which maps to the correct configuration for IPQ6018.
Fixes: 5d4753f741 ("hwspinlock: qcom: add support for MMIO on older SoCs")
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905095535.1263113-3-quic_viswanat@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 5d4753f741 ("hwspinlock: qcom: add support for MMIO on older
SoCs") introduced and made regmap_config mandatory in the of_data struct
but didn't add the regmap_config for sfpb based devices.
SFPB based devices can both use the legacy syscon way to probe or the
new MMIO way and currently device that use the MMIO way are broken as
they lack the definition of the now required regmap_config and always
return -EINVAL (and indirectly makes fail probing everything that
depends on it, smem, nandc with smem-parser...)
Fix this by correctly adding the missing regmap_config and restore
function of hwspinlock on SFPB based devices with MMIO implementation.
Cc: stable@vger.kernel.org
Fixes: 5d4753f741 ("hwspinlock: qcom: add support for MMIO on older SoCs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230716022804.21239-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230314180241.2865888-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230314180100.2865801-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If a remove callback of a platform driver returns a non-zero value, the
driver core emits an error message, otherwise ignores the value and
completes unbinding the device.
As omap_hwspinlock_remove() already emits an error message, suppress the
core's error message by returning zero.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230314180100.2865801-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
devm_regmap_field_alloc may fails, priv field might be error pointer and
cause illegal address access later.
Signed-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227004116.1273988-1-void0red@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/hwspinlock/omap_hwspinlock.c:164:34: error: ‘omap_hwspinlock_of_match’ defined but not used [-Werror=unused-const-variable=]
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512164520.212312-1-krzysztof.kozlowski@linaro.org
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Replace the open-code with device_match_of_node().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/202211251544369078587@zte.com.cn
Older Qualcomm SoCs have TCSR mutex registers with 0x80 stride, instead
of 0x1000. Add dedicated compatibles and regmap for such case.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909092035.223915-5-krzysztof.kozlowski@linaro.org
Allow sfpb-mutex to use mmio in addition to syscon.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707102040.1859-1-ansuelsmth@gmail.com
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220418105508.2558696-1-chi.minghao@zte.com.cn
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/hwspinlock/sprd_hwspinlock.c:96:36: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125225723.GA78256@embeddedor
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/hwspinlock/stm32_hwspinlock.c:84:32: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125021353.GA29777@embeddedor
Set the clock during probe and keep its control during suspend / resume
operations.
This fixes an issue when CONFIG_PM is not set and where the clock is
never enabled.
Make use of devm_ functions to simplify the code.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011135836.1045437-1-fabien.dessenne@foss.st.com
Adds the sun6i_hwspinlock driver for the hardware spinlock unit found in
most of the sun6i compatible SoCs.
This unit provides at least 32 spinlocks in hardware. The implementation
supports 32, 64, 128 or 256 32bit registers. A lock can be taken by
reading a register and released by writing a 0 to it. This driver
supports all 4 spinlock setups, but for now only the first setup (32
locks) seem to exist in available devices. This spinlock unit is shared
between all ARM cores and the embedded companion core. All of them can
take/release a lock with a single cycle operation. It can be used to
sync access to devices shared by the ARM cores and the companion core.
There are two ways to check if a lock is taken. The first way is to read
a lock. If a 0 is returned, the lock was free and is taken now. If an 1
is returned, the caller has to try again. Which means the lock is taken.
The second way is to read a 32bit wide status register where every bit
represents one of the 32 first locks. According to the datasheets this
status register supports only the 32 first locks. This is the reason the
first way (lock read/write) approach is used to be able to cover all 256
locks in future devices. The driver also reports the amount of supported
locks via debugfs.
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/bfd2b97307c2321b15c09683f4bd5e1fcc792f13.1615713499.git.wilken.gottwalt@posteo.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The AM64x SoC contains a HwSpinlock IP instance in the MAIN domain,
and is a minor variant of the IP on the current TI K3 SoCs such as
AM64x, J721E or J7200 SoCs. The IP is not built with the K3 safety
feature in hardware, and has slightly different integration into
the overall SoC.
Add the support for this IP through a new compatible.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210209172240.2305-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Remove the the redundant 'of_match_ptr' macro to fix below warning
when the CONFIG_OF is not selected.
All warnings:
drivers/hwspinlock/sirf_hwspinlock.c:87:34: warning: unused variable
'sirf_hwpinlock_ids' [-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/250d35cb489c3c4c066f7ce256d27f36712a1979.1591618255.git.baolin.wang7@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The macro function of_match_ptr() is NULL if CONFIG_OF is not set, in this
case Clang compiler would complain the of_device_id variable is unused.
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d8c8bbbb1a ("hwspinlock: sprd: Add hardware spinlock driver")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201112070410.14810-1-zhang.lyra@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The hardware spinlock devices are defined in the DT, there's no need for
init calls order, remove boilerplate code by using module_platform_driver.
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201030034654.15775-3-zhang.lyra@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In modern Qualcomm platforms the mutex region of the TCSR is forked off
into its own block, all with a offset of 0 and stride of 4096, and in
some of these platforms no other registers in this region is accessed
from Linux.
So add support for directly memory mapping this register space, to avoid
the need to represent this block using a syscon.
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622075956.171058-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Every hwspinlock driver is expected to depend on the
hwspinlock core, so it's possible to simplify the
Kconfig, factoring out the HWSPINLOCK dependency.
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20200414220943.6203-1-ezequiel@collabora.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200319213839.GA10669@embeddedor.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together, which can simpify the code.
Meanwhile renaming the error label to make more sense after removing
iounmap().
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/6c09c5034a7e68fdfc22d2cb5daa375bccb33a66.1578453062.git.baolin.wang7@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Since the hwspinlock core has changed the PM runtime to be optional, thus
remove the redundant PM runtime implementation in the u8500 HWSEM driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Since the hwspinlock core has changed the PM runtime to be optional, thus
remove the redundant PM runtime implementation in the Spreadtrum hwlock
driver.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now some hwspinlock controllers did not have the requirement to implement
the PM runtime, but drivers must enable the PM runtime to comply with the
hwspinlock core.
Thus we can change the PM runtime support to be optional by validating
the -EACCES error number which means the PM runtime is not enabled, and
removing the return value validating of pm_runtime_put(). So that we
can remove some redundant PM runtime code in drivers.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The original code use BUG_ON() to validate the parameters when locking
or unlocking one hardware lock, but we should not crash the whole kernel
though the hwlock parameters are incorrect, instead we can return
the error number for users and give some warning.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use devm_hwspin_lock_register() to register the hwlock controller instead of
unregistering the hwlock controller explicitly when removing the device.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use devm_add_action_or_reset() for calls to clk_disable_unprepare(),
which can simplify the error handling.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We must check the return value of clk_prepare_enable() to make sure the
hardware spinlock controller can be enabled successfully, otherwise we
should return error.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
