Add kernel-doc for functions to get rid of below warnings
when built with W=1.
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:260: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_in_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:304: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_out_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:446: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_in_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'chip' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'buf' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'len' not described in 'omap_nand_data_out_dma_pref'
drivers/mtd/nand/raw/omap2.c:467: warning: Function parameter or struct member 'force_8bit' not described in 'omap_nand_data_out_dma_pref'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412031716.JfNIh1Uu-lkp@intel.com/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The NAND chip-selects are registered for the Arasan driver during
initialization but are not de-registered when the driver is unloaded. As a
result, if the driver is loaded again, the chip-selects remain registered
and busy, making them unavailable for use.
Fixes: 197b88fecc ("mtd: rawnand: arasan: Add new Arasan NAND controller")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski ICEYE <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When two chip-selects are configured in the device tree, and the second is
a non-native GPIO, both the GPIO-based chip-select and the first native
chip-select may be asserted simultaneously. This double assertion causes
incorrect read and write operations.
The issue occurs because when nfc->ncs <= 2, nfc->spare_cs is always
initialized to 0 due to static initialization. Consequently, when the
second chip-select (GPIO-based) is selected in anfc_assert_cs(), it is
detected by anfc_is_gpio_cs(), and nfc->native_cs is assigned the value 0.
This results in both the GPIO-based chip-select being asserted and the
NAND controller register receiving 0, erroneously selecting the native
chip-select.
This patch resolves the issue, as confirmed by oscilloscope testing with
configurations involving two or more chip-selects in the device tree.
Fixes: acbd3d0945 ("mtd: rawnand: arasan: Leverage additional GPIO CS")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There may be a potential integer overflow issue in inftl_partscan().
parts[0].size is defined as "uint64_t" while mtd->erasesize and
ip->firstUnit are defined as 32-bit unsigned integer. The result of
the calculation will be limited to 32 bits without correct casting.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free.
Fixes: 6d734f1bfc ("mtd: rawnand: atmel: Fix possible memory leak")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
JFFS2:
- Bug fix for rtime compression
- Various cleanups
UBI:
- Cleanups for fastmap and wear leveling
UBIFS:
- Add support for FS_IOC_GETFSSYSFSPATH
- Remove dead ioctl code
- Fix UAF in ubifs_tnc_end_commit()
-----BEGIN PGP SIGNATURE-----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=PpBC
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Bug fix for rtime compression
- Various cleanups
UBI:
- Cleanups for fastmap and wear leveling
UBIFS:
- Add support for FS_IOC_GETFSSYSFSPATH
- Remove dead ioctl code
- Fix UAF in ubifs_tnc_end_commit()"
* tag 'ubifs-for-linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (25 commits)
ubifs: Fix uninitialized use of err in ubifs_jnl_write_inode()
jffs2: Prevent rtime decompress memory corruption
jffs2: remove redundant check on outpos > pos
fs: jffs2: Fix inconsistent indentation in jffs2_mark_node_obsolete
jffs2: Correct some typos in comments
jffs2: fix use of uninitialized variable
jffs2: Use str_yes_no() helper function
mtd: ubi: remove redundant check on bytes_left at end of function
mtd: ubi: fix unreleased fwnode_handle in find_volume_fwnode()
ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit
ubi: fastmap: Fix duplicate slab cache names while attaching
ubifs: xattr: remove unused anonymous enum
ubifs: Reduce kfree() calls in ubifs_purge_xattrs()
ubifs: Call iput(xino) only once in ubifs_purge_xattrs()
ubi: wl: Close down wear-leveling before nand is suspended
mtd: ubi: Rmove unused declaration in header file
ubifs: Correct the total block count by deducting journal reservation
ubifs: Convert to use ERR_CAST()
ubifs: add support for FS_IOC_GETFSSYSFSPATH
ubifs: remove unused ioctl flags GETFLAGS/SETFLAGS
...
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
misc issues got fixed.
SPI-NAND changes:
A load of fixes to Winbond manufacturer driver have been done, plus a
structure constification.
Raw NAND changes:
The GPMI driver has been improved on the power management side.
The Davinci driver has been cleaned up.
A leak in the Atmel driver plus some typos in the core have been fixed.
SPI NOR changes:
Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix. SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking the
boot sequence because of the endianness problems that appear when the
bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with byte swap
support. Along with the SPI MEM byte swap support we queue a patch for
the SPI MXIC controller that swaps the bytes back at runtime.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmc/WusACgkQJWrqGEe9
VoR0Zgf/admMDFN51dtkz950bnOkZfot/4uLgUQCDenhbugHrom7KWQ6+oh1+HSN
9EAjLoLNQzq4vxKx1WoI/99iJO86zg/DiyVD3nQidv9JkqHRDp2t13ZLclr4gGyW
Kh1lDQ+9GwpB8CQQnxVaPL39NjjqR3RiEfEP/1fVgGYQvCt4yedhVsDT3WThJeVb
1n7l54RBpZji88mT0chFB9CoSLnzrYZFh2MvzJaW/i1v02yZLXHFxFiKiKo+WysY
FGQTY3x0j20H2Ib8RSP7ECegvNb1HtfIxAPsTIqDBGbrA+ahvBr0J/XxX3NbV3RT
Ee4rXqL257zH9dC9Rr1LJAZCqiyx7w==
=p+y9
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD device changes:
- switch platform_driver back to remove()
- misc fixes
SPI-NAND changes:
- a load of fixes to Winbond manufacturer driver
- structure constification
Raw NAND changes:
- improve the power management of the GPMI driver
- Davinci driver clean-ups
- fix leak in the Atmel driver
- fix some typos in the core
SPI NOR changes:
- Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix.
SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking
the boot sequence because of the endianness problems that appear
when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with
byte swap support. Along with the SPI MEM byte swap support we
queue a patch for the SPI MXIC controller that swaps the bytes back
at runtime"
* tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (25 commits)
mtd: spi-nor: core: replace dummy buswidth from addr to data
mtd: spi-nor: winbond: add "w/ and w/o SFDP" comment
mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in RD_ANY_REG_OP
mtd: Switch back to struct platform_driver::remove()
mtd: cfi_cmdset_0002: remove redundant assignment to variable ret
mtd: spinand: Constify struct nand_ecc_engine_ops
MAINTAINERS: add mailing list for GPMI NAND driver
mtd: spinand: winbond: Sort the devices
mtd: spinand: winbond: Ignore the last ID characters
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
mtd: spinand: winbond: Fix 512GW and 02JW OOB layout
mtd: nand: raw: gpmi: improve power management handling
mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
mtd: rawnand: davinci: use generic device property helpers
mtd: rawnand: davinci: break the line correctly
mtd: rawnand: davinci: order headers alphabetically
mtd: rawnand: atmel: Fix possible memory leak
mtd: rawnand: Correct multiple typos in comments
mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE
mtd: spi-nor: add support for Macronix Octal flash
...
A load of fixes to Winbond manufacturer driver have been done, plus a
structure constification.
Raw NAND changes:
The GPMI driver has been improved on the power management side.
The Davinci driver has been cleaned up.
A leak in the Atmel driver plus some typos in the core have been fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmc8is0ACgkQJWrqGEe9
VoRXDwf+IqUGLRVdCh9wQFsjEKXBX9lmLF+McG+aumLnpmxq+9iDs0FzPg39gi9W
iSZiYRnVNdOPskEMpJcAnalFcAT56SFjM7IUluxvMG4TKsaWqV7ZCP+fwV+43tyl
57ohTlQCpJnTAqUdARIMVPjIlBaXTsmzyt74nb3hOUGFa5NKwF7PxBP0e504akUP
TohLFHWOO4BeooqkDroz8H3Po+uO3YDVf3l0DsGANptAmA0azDjj+ZUEKOtsNEQw
ZmeZ8sGZGYswrcjYqJAGKXeXBOBmfFSTlEy72cKKqs8KBGqGCRTyoDjVpIBNK+vl
vyMY8AoViWX5nb83Qu85QckJbQlEqw==
=GEHJ
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.13' into mtd/next
SPI-NAND changes:
A load of fixes to Winbond manufacturer driver have been done, plus a
structure constification.
Raw NAND changes:
The GPMI driver has been improved on the power management side.
The Davinci driver has been cleaned up.
A leak in the Atmel driver plus some typos in the core have been fixed.
-----BEGIN PGP SIGNATURE-----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=o4ww
-----END PGP SIGNATURE-----
Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
it: macronix. SPI NOR flashes may swap the bytes on a 16-bit boundary
when configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the controllers
swap the bytes back at runtime. This avoids breaking the boot sequence
because of the endianness problems that appear when the bootloaders use
1-1-1 and the kernel uses 8D-8D-8D with byte swap support. Along with the
SPI MEM byte swap support we queue a patch for the SPI MXIC controller
that swaps the bytes back at runtime.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmczG/oACgkQS1VPR6WN
FOnTCAf/YjH9AimQAFJLRKoGqsf6boh1JppcRh1YTRS+D6+Ap9+s1gJoZZYs5VWA
vNfBzGqDXknBvpmOgoXnuDu2zFs9FUvdN5Kf7w6LiS5qtz7uOxHdVoDQyDgnN6w5
9ts7qF7LViBHg/HgTEzQT2Zj6qmvIwUbccIkmJeehWjEP/urzOML5nPnM9g4HZVB
W8B5KQ4TiOY1GxkXvIP6EQS6mDKznP3yl2Hnsmk0HPpSm6D807O2zvT+z1SCxpjy
C8+mYRKsRxHoFGL6UzWgqREGBn2wzF7Ral1CR9SpSZZLLtr6S0shqRzKiiH8eiZK
1hFpXzMS3OWi4a/5724AWaqcR0Qgqw==
=jf3Q
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
SPI NOR introduces byte swap support for 8D-8D-8D mode and a user for
it: macronix. SPI NOR flashes may swap the bytes on a 16-bit boundary
when configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the controllers
swap the bytes back at runtime. This avoids breaking the boot sequence
because of the endianness problems that appear when the bootloaders use
1-1-1 and the kernel uses 8D-8D-8D with byte swap support. Along with the
SPI MEM byte swap support we queue a patch for the SPI MXIC controller
that swaps the bytes back at runtime.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmczG/oACgkQS1VPR6WN
# FOnTCAf/YjH9AimQAFJLRKoGqsf6boh1JppcRh1YTRS+D6+Ap9+s1gJoZZYs5VWA
# vNfBzGqDXknBvpmOgoXnuDu2zFs9FUvdN5Kf7w6LiS5qtz7uOxHdVoDQyDgnN6w5
# 9ts7qF7LViBHg/HgTEzQT2Zj6qmvIwUbccIkmJeehWjEP/urzOML5nPnM9g4HZVB
# W8B5KQ4TiOY1GxkXvIP6EQS6mDKznP3yl2Hnsmk0HPpSm6D807O2zvT+z1SCxpjy
# C8+mYRKsRxHoFGL6UzWgqREGBn2wzF7Ral1CR9SpSZZLLtr6S0shqRzKiiH8eiZK
# 1hFpXzMS3OWi4a/5724AWaqcR0Qgqw==
# =jf3Q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Nov 2024 10:12:26 AM CET
# gpg: using RSA key 1D422ACACF0EC86D5E1DFEDF4B554F47A58D14E9
# gpg: Good signature from "Tudor Ambarus (4096-bit rsa key) <tudor.ambarus@microchip.com>" [full]
# gpg: aka "Tudor Ambarus <tudor.ambarus@gmail.com>" [full]
# gpg: tudor.ambarus@microchip.com: Verified 15 signatures in the past 5 years.
# Encrypted 0 messages.
# gpg: tudor.ambarus@gmail.com: Verified 15 signatures in the past 5 years.
# Encrypted 0 messages.
In function ubi_nvmem_reg_read the while-loop can only be exiting
of bytes_left is zero or an error has occurred. There is an exit
return path if an error occurs, so the bytes_left can only be
zero after that point. Hence the check for a non-zero bytes_left
at the end of the function is redundant and can be removed. Remove
the check and just return 0.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The 'fw_vols' fwnode_handle initialized via
device_get_named_child_node() requires explicit calls to
fwnode_handle_put() when the variable is no longer required.
Add the missing calls to fwnode_handle_put() before the function
returns.
Cc: stable@vger.kernel.org
Fixes: 51932f9fc4 ("mtd: ubi: populate ubi volume fwnode")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit 4c39529663 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers.
Fixes: d2158f69a7 ("UBI: Remove alloc_ai() slab name from parameter list")
Fixes: fdf10ed710 ("ubi: Rework Fastmap attach base code")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If a reboot/shutdown signal with double force (-ff) is triggered when
the erase worker or wear-leveling worker function runs we may end up in
a race condition since the MTD device gets a reboot notification and
suspends the nand flash before the erase or wear-leveling is done. This
will reject all accesses to the flash with -EBUSY.
Sequence for the erase worker function:
systemctl reboot -ff ubi_thread
do_work
__do_sys_reboot
blocking_notifier_call_chain
mtd_reboot_notifier
nand_shutdown
nand_suspend
__erase_worker
ubi_sync_erase
mtd_erase
nand_erase_nand
# Blocked by suspended chip
nand_get_device
=> EBUSY
Similar sequence for the wear-leveling function:
systemctl reboot -ff ubi_thread
do_work
__do_sys_reboot
blocking_notifier_call_chain
mtd_reboot_notifier
nand_shutdown
nand_suspend
wear_leveling_worker
ubi_eba_copy_leb
ubi_io_write
mtd_write
nand_write_oob
# Blocked by suspended chip
nand_get_device
=> EBUSY
systemd-shutdown[1]: Rebooting.
ubi0 error: ubi_io_write: error -16 while writing 2048 bytes to PEB
CPU: 1 PID: 82 Comm: ubi_bgt0d Kdump: loaded Tainted: G O
(unwind_backtrace) from [<80107b9f>] (show_stack+0xb/0xc)
(show_stack) from [<8033641f>] (dump_stack_lvl+0x2b/0x34)
(dump_stack_lvl) from [<803b7f3f>] (ubi_io_write+0x3ab/0x4a8)
(ubi_io_write) from [<803b817d>] (ubi_io_write_vid_hdr+0x71/0xb4)
(ubi_io_write_vid_hdr) from [<803b6971>] (ubi_eba_copy_leb+0x195/0x2f0)
(ubi_eba_copy_leb) from [<803b939b>] (wear_leveling_worker+0x2ff/0x738)
(wear_leveling_worker) from [<803b86ef>] (do_work+0x5b/0xb0)
(do_work) from [<803b9ee1>] (ubi_thread+0xb1/0x11c)
(ubi_thread) from [<8012c113>] (kthread+0x11b/0x134)
(kthread) from [<80100139>] (ret_from_fork+0x11/0x38)
Exception stack(0x80c43fb0 to 0x80c43ff8)
...
ubi0 error: ubi_dump_flash: err -16 while reading 2048 bytes from PEB
ubi0 error: wear_leveling_worker: error -16 while moving PEB 246 to PEB
ubi0 warning: ubi_ro_mode.part.0: switch to read-only mode
...
ubi0 error: do_work: work failed with error code -16
ubi0 error: ubi_thread: ubi_bgt0d: work failed with error code -16
...
Kernel panic - not syncing: Software Watchdog Timer expired
Add a reboot notification for the ubi/wear-leveling to shutdown any
potential flash work actions before the nand is suspended.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The definition of ubi_destroy_ai() has been removed since
commit dac6e2087a ("UBI: Add fastmap stuff to attach.c").
Remove the empty declaration in header file.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit 14072ee33d ("ubi: fastmap: Check wl_pool for free peb
before wear leveling"), wear_leveling_worker() won't schedule fm_work
if wear-leveling pool is empty, which could temporarily disable the
wear-leveling until the fastmap is updated(eg. pool becomes empty).
Fix it by scheduling fm_work if wl_pool is empty during wear-leveing.
Fixes: 14072ee33d ("ubi: fastmap: Check wl_pool for free peb before wear leveling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
During wear-leveing work, the source PEB will be moved into scrub list
when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong
for non-scrub type source PEB. The problem could bring extra and
ineffective wear-leveing jobs, which makes more or less negative effects
for the life time of flash. Specifically, the process is divided 2 steps:
1. wear_leveling_worker // generate false scrub type PEB
ubi_eba_copy_leb // MOVE_RETRY is returned
leb_write_trylock // trylock failed
scrubbing = 1;
e1 is put into ubi->scrub
2. wear_leveling_worker // schedule false scrub type PEB for wl
scrubbing = 1
e1 = rb_entry(rb_first(&ubi->scrub))
The problem can be reproduced easily by running fsstress on a small
UBIFS partition(<64M, simulated by nandsim) for 5~10mins
(CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following
message is shown:
ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165
Since scrub type source PEB has set variable scrubbing as '1', and
variable scrubbing is checked before variable keep, so the problem can
be fixed by setting keep variable as 1 directly if the source LEB cannot
be locked.
Fixes: e801e128b2 ("UBI: fix missing scrub when there is a bit-flip")
CC: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The default dummy cycle for Macronix SPI NOR flash in Octal Output
Read Mode(1-1-8) is 20.
Currently, the dummy buswidth is set according to the address bus width.
In the 1-1-8 mode, this means the dummy buswidth is 1. When converting
dummy cycles to bytes, this results in 20 x 1 / 8 = 2 bytes, causing the
host to read data 4 cycles too early.
Since the protocol data buswidth is always greater than or equal to the
address buswidth. Setting the dummy buswidth to match the data buswidth
increases the likelihood that the dummy cycle-to-byte conversion will be
divisible, preventing the host from reading data prematurely.
Fixes: 0e30f47232 ("mtd: spi-nor: add support for DTR protocol")
Cc: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20241112075242.174010-2-linchengming884@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Commit d35df77707 ("mtd: spi-nor: winbond: fix w25q128 regression")
upstream fixed a regression for flavors of 0xef4018 flash that don't
define SFDP tables. Add a comment on the flash definition highlighting
that there are flavors of flashes with and without SFDP support.
It spares developers searching the entire git log for when we'll better
handle these cases.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241029080049.96679-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
The is_bin_visible() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-5-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In octal DTR mode, RD_ANY_REG_OP needs to use 4-byte address regardless
of flash's internal address mode. Use nor->addr_nbytes which is set to 4
during setup.
Fixes: eff9604390 ("mtd: spi-nor: spansion: add octal DTR support in RD_ANY_REG_OP")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20241016000837.17951-1-Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/mtd to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241007205803.444994-10-u.kleine-koenig@baylibre.com
Variable ret is being assigned a value that is never read, the following
goto statement jumps to a statement that assigns ret a return from the
call to function do_write_oneword_once. The assignment is redundant
and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241002172258.958113-1-colin.i.king@gmail.com
'struct nand_ecc_engine_ops' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
Update the prototype of mxic_ecc_get_pipelined_ops() accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
16709 1374 16 18099 46b3 drivers/mtd/nand/ecc-mxic.o
After:
=====
text data bss dec hex filename
16789 1294 16 18099 46b3 drivers/mtd/nand/ecc-mxic.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/72597e9de2320a4109be2112e696399592edacd4.1729271136.git.christophe.jaillet@wanadoo.fr
Use alphabetical order, not because it's pretty, but because it makes
sense. This way the devices are listed by density, and then by hardware
feature set. Add comments to make the list more understandable.
There is no intended functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/linux-mtd/20241009125002.191109-5-miquel.raynal@bootlin.com
The last 4 characters in Winbond's branding indicate:
- the package type (ZE/SF/TB),
- the temperature grade (I/J),
- special options, typically the continuous read vs. page read feature
support and its default (G/T/F/R),
None of these information impact us, at the software level (well, the
continuous read mode by default is impacting, but is already handled
gracefully by disabling it in the initialization phase), so let's get
rid of it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/linux-mtd/20241009125002.191109-4-miquel.raynal@bootlin.com
These four chips:
* W25N512GW
* W25N01GW
* W25N01JW
* W25N02JW
all require a single bit of ECC strength and thus feature an on-die
Hamming-like ECC engine. There is no point in filling a ->get_status()
callback for them because the main ECC status bytes are located in
standard places, and retrieving the number of bitflips in case of
corrected chunk is both useless and unsupported (if there are bitflips,
then there is 1 at most, so no need to query the chip for that).
Without this change, a kernel warning triggers every time a bit flips.
Fixes: 6a804fb72d ("mtd: spinand: winbond: add support for serial NAND flash")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/linux-mtd/20241009125002.191109-3-miquel.raynal@bootlin.com
Refactor the power management handling in the gpmi nand driver. Remove
redundant pm_runtime calls in the driver probe function. Handle the pad
control and use the leverage runtime suspend and resume calls to take
care of clocks in system suspend and resume functions.
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241007191319.220775-2-han.xu@nxp.com
There's no reason for this driver to be using OF-specific property
accessors. Switch to using generic device property interfaces and
replace the of.h include with property.h. This allows us to no longer
check the existence of the associated of_node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241007122350.75285-3-brgl@bgdev.pl
The line in nand_davinci_get_pdata() prototype is broken in a weird and
unreadable way. Make it consistent with the rest of the code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241007122350.75285-2-brgl@bgdev.pl
The pmecc "user" structure is allocated in atmel_pmecc_create_user() and
was supposed to be freed with atmel_pmecc_destroy_user(), but this other
helper is never called. One solution would be to find the proper
location to call the destructor, but the trend today is to switch to
device managed allocations, which in this case fits pretty well.
Replace kzalloc() by devm_kzalloc() and drop the destructor entirely.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/all/ZvmIvRJCf6VhHvpo@gallifrey/
Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241001203149.387655-1-miquel.raynal@bootlin.com
The rpc-if-hyperflash driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: 5de15b610f ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240731080846.257139-1-biju.das.jz@bp.renesas.com
Add manufacturer ID 0xc2 at the end of ID table to allow manufacturer
fixups to be applied for any Macronix flash. This spares us of adding
new flash entries for flashes that can be initialized solely based on
the SFDP data, but still need the manufacturer hooks to set parameters
that can't be discovered at SFDP parsing time.
The ID is added in order to set the octal DTR methods. SFDP defines a
"Command Sequences to Change to Octal DDR (8D-8D-8D) Mode" which can
enable the octal DTR mode. Until that is parsed and used, use the
local defined method.
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Link: https://lore.kernel.org/r/20240926141956.2386374-7-alvinzhou.tw@gmail.com
[ta: update commit message and comment in the code]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Substitute the inclusion of <linux/random.h> header with
<linux/prandom.h> to allow the removal of legacy inclusion
of <linux/prandom.h> from <linux/random.h>.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Parse BFPT in order to retrieve the byte order in 8D-8D-8D mode.
This info flag will be used as a basis to determine whether
there is byte swapping of data for SPI NOR flash in octal
DTR mode.
The controller driver will check whether byte swapping is supported
to determine whether the corresponding operation are supported,
thus avoiding the generation of unexpected data order.
Merge Tudor's patch and add modifications for suiting newer version
of Linux kernel.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Link: https://lore.kernel.org/r/20240926141956.2386374-5-alvinzhou.tw@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Macronix swaps bytes on a 16-bit boundary when configured in Octal DTR.
The byte order of 16-bit words is swapped when read or written in 8D-8D-8D
mode compared to STR modes. Allow operations to specify the byte order in
DTR mode, so that controllers can swap the bytes back at run-time to
address the flash's endianness requirements, if they are capable. If the
controller is not capable of swapping the bytes, the protocol is downgrade
via spi_nor_spimem_adjust_hwcaps(). When available, the swapping of the
bytes is always done regardless if it's a data or register access, so that
it comply with the JESD216 requirements: "Byte order of 16-bit words is
swapped when read in 8D-8D-8D mode compared to 1-1-1".
Merge Tudor's patch and add modifications for suiting newer version
of Linux kernel.
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Link: https://lore.kernel.org/r/20240926141956.2386374-4-alvinzhou.tw@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Create Macronix specify method for enable Octal DTR mode and
set 20 dummy cycles to allow running at the maximum supported
frequency for Macronix Octal flash.
Use number of dummy cycles which is parse by SFDP then convert
it to bit pattern and set in CR2 register.
Set CR2 register for enable octal DTR mode.
Use Read ID to confirm that enabling/disabling octal DTR mode
was successful.
Macronix ID format is A-A-B-B-C-C in octal DTR mode.
To ensure the successful enablement of octal DTR mode, confirm
that the 6-byte data is entirely correct.
Co-developed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw>
Link: https://lore.kernel.org/r/20240926141956.2386374-2-alvinzhou.tw@gmail.com
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler;
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
support Innolux G070ACE-LH3 plus DT bindings
support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701:
decouple DSI and DRM code
add SPI support
support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop: Support RGB display on Rockchip RK3066; Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset
-----BEGIN PGP SIGNATURE-----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=7jR+
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmbkfEYACgkQJWrqGEe9
VoT9TAgAsJZeCITvQfCBcaBScr8O86eqynvwkkfltdK8kcdCtH7P3gR9XvMmOOq8
QY8Ru072ufTj0dwT+YnWlRZ0jopK2Kd8JB41jYm4pP3euSUyIm+gf5d7AbHoWlLm
J6HfvnDNzEO0Fixpj3hqFKCDr1Xt0jWzVLh/ZyNa+0co/oJi0w0lnWxIs/iCgBQ2
sSosVhc0X0kt7RhV8RFvyIu3i9k3MFzKYt6hP07PpAVxlshvWHLOnU27FiIhGioz
UGwasbZ2XLbOZhcGaK9Q+cCrMZn52zJI8inlLKBFizU1+eUz4Q1kCVnx0OiPz7uW
7NyiiOUjPpJCrkKpWZbUnV3C2lZQOg==
=Xg6Q
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.12' into mtd/next
* Raw NAND changes
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZuWyzBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CXj6AQCvucu8Z8Z2WDwvpn51GGNOSmgIfHkJ
i02EIQW5Cz3dygEA7pVZYyW1M/IfbgauX/NI/eYoEFwDfMD5t+MJ4HId+wY=
=F9Ud
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.12' into mtd/next
SPI NOR changes for 6.12
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
Fix flash probing by name. Flash entries without a name are allowed
since commit 15eb8303bb ("mtd: spi-nor: mark the flash name as
obsolete"). But it was just until recently that a flash entry without a
name was actually introduced. This triggers a bug in the legacy probe by
name path. Skip entries without a name to fix it.
Fixes: 2095e7da8049 ("mtd: spi-nor: spansion: Add support for S28HS256T")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org
