mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-15 01:24:33 +00:00
305 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9f3a2ba62c |
The core framework gained a clk provider helper, a clk consumer helper, and
some unit tests for the assigned clk rates feature in DeviceTree. On the vendor
driver side, we gained a whole pile of SoC driver support detailed below. The
majority in the diffstat is Qualcomm, but there's also quite a few Samsung and
Mediatek clk driver additions in here as well. The top vendors is quite common,
but the sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P
- Global, camera, display, GPU, and video clock controllers for Qualcomm
SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support for the
Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on
Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus
-----BEGIN PGP SIGNATURE-----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=FqLm
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
||
|
Stephen Boyd
|
21a5352dc7 |
Merge branches 'clk-marvell', 'clk-adi', 'clk-qcom' and 'clk-devm' into clk-next
- Add devm_clk_bulk_get_all_enabled() to return number of clks acquired - Marvell PXA1908 SoC clks * clk-marvell: clk: mmp: Add Marvell PXA1908 MPMU driver clk: mmp: Add Marvell PXA1908 APMU driver clk: mmp: Add Marvell PXA1908 APBCP driver clk: mmp: Add Marvell PXA1908 APBC driver dt-bindings: clock: Add Marvell PXA1908 clock bindings clk: mmp: Switch to use struct u32_fract instead of custom one * clk-adi: clk: clk-axi-clkgen: make sure to enable the AXI bus clock dt-bindings: clock: axi-clkgen: include AXI clk * clk-qcom: (43 commits) clk: qcom: remove unused data from gcc-ipq5424.c clk: qcom: Add support for Global Clock Controller on QCS8300 dt-bindings: clock: qcom: Add GCC clocks for QCS8300 clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574 dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding clk: qcom: add SAR2130P GPU Clock Controller support clk: qcom: dispcc-sm8550: enable support for SAR2130P clk: qcom: tcsrcc-sm8550: add SAR2130P support clk: qcom: add support for GCC on SAR2130P clk: qcom: rpmh: add support for SAR2130P clk: qcom: rcg2: add clk_rcg2_shared_floor_ops dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible dt-bindings: clock: qcom: document SAR2130P Global Clock Controller dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible clk: qcom: Make GCC_6125 depend on QCOM_GDSC dt-bindings: clock: qcom: gcc-ipq9574: remove q6 bring up clock macros dt-bindings: clock: qcom: gcc-ipq5332: remove q6 bring up clock macros ... * clk-devm: clk: Provide devm_clk_bulk_get_all_enabled() helper |
||
|
Yassine Oudjana
|
a7479860bb |
dt-bindings: clock: mediatek: Add bindings for MT6735 syscon clock and reset controllers
Add device tree bindings for syscon clock and reset controllers (IMGSYS, MFGCFG, VDECSYS and VENCSYS). Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241106111402.200940-2-y.oudjana@protonmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Bjorn Andersson
|
153986098c |
Merge branch '20241028060506.246606-3-quic_srichara@quicinc.com' into clk-for-6.13
Merge IPQ5424 global clock controller binding through topic branch to make the constants available for both clock and DeviceTree branches. |
||
|
Sricharan Ramabadhran
|
03e525c66d |
dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
Add binding for the Qualcomm IPQ5424 Global Clock Controller Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241028060506.246606-3-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Konrad Dybcio
|
111481020a |
dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
Expand qcom,sm8450-gpucc bindings to include SAR2130P. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-5-ecad2a1432ba@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Ryan Chen
|
76c6217c31 |
dt-bindings: mfd: aspeed: Support for AST2700
Add reset, clk dt bindings headers, and update compatible support for AST2700 clk, silicon-id in yaml. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241023090153.1395220-2-ryan_chen@aspeedtech.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Yassine Oudjana
|
ea1cca0268 |
dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
Add clock definitions for the main clock and reset controllers of MT6735 (apmixedsys, topckgen, infracfg and pericfg). Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241017071708.38663-2-y.oudjana@protonmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Heiko Stuebner
|
eb3b3f5205 |
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
Block comments should align the * on each line, as checkpatch rightfully
pointed out, so fix that style issue on the newly added rk3576 headers.
Fixes: 49c04453db81 ("dt-bindings: clock, reset: Add support for rk3576")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240909223149.85364-1-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
||
|
Detlev Casanova
|
49c04453db |
dt-bindings: clock, reset: Add support for rk3576
Add clock and reset ID defines for rk3576. Compared to the downstream bindings written by Elaine, this uses continous gapless IDs starting at 0. Thus all numbers are different between downstream and upstream, but names are kept exactly the same. Also add documentation for the rk3576 CRU core. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/0102019199a76766-f3a2b53f-d063-458b-b0d1-dfbc2ea1893c-000000@eu-west-1.amazonses.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Stephen Boyd
|
589eb11498 |
Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next
- Add support for the AP sub-system clock controller in the T-Head TH1520 * clk-qcom: (71 commits) clk: qcom: Park shared RCGs upon registration clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks clk: qcom: common: Add interconnect clocks support interconnect: icc-clk: Add devm_icc_clk_register interconnect: icc-clk: Specify master/slave ids dt-bindings: clock: qcom: Add AHB clock for SM8150 clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks dt-bindings: interconnect: Add Qualcomm IPQ9574 support clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks clk: qcom: gcc-ipq6018: update sdcc max clock frequency clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver dt-bindings: clock: qcom: Add SM8650 camera clock controller dt-bindings: clock: qcom: Update the order of SC8280XP camcc header clk: qcom: videocc-sm8550: Add SM8650 video clock controller clk: qcom: videocc-sm8550: Add support for videocc XO clk ares dt-bindings: clock: qcom: Add SM8650 video clock controller dt-bindings: clock: qcom: Update SM8450 videocc header file name clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's ... * clk-rockchip: dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS clk: rockchip: rk3188: Drop CLK_NR_CLKS usage clk: rockchip: Switch to use kmemdup_array() clk: rockchip: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Drop CLK_NR_CLKS clk: rockchip: rk3128: Drop CLK_NR_CLKS usage clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks clk: rockchip: rk3128: Export PCLK_MIPIPHY dt-bindings: clock: rk3128: Add PCLK_MIPIPHY * clk-sophgo: clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate() clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id() clk: sophgo: Add SG2042 clock driver dt-bindings: clock: sophgo: add clkgen for SG2042 dt-bindings: clock: sophgo: add RP gate clocks for SG2042 dt-bindings: clock: sophgo: add pll clocks for SG2042 * clk-thead: clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller |
||
|
Stephen Boyd
|
bc060e6bb7 |
Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner' and 'clk-samsung' into clk-next
* clk-renesas: clk: renesas: r9a08g045: Add clock, reset and power domain support for I2C clk: renesas: r8a779h0: Add Audio clocks clk: renesas: r9a08g045: Add clock, reset and power domain support for the VBATTB IP dt-bindings: clock: rcar-gen2: Remove obsolete header files dt-bindings: clock: r8a7779: Remove duplicate newline clk: renesas: Drop "Renesas" from individual driver descriptions clk: renesas: r8a779h0: Fix PLL2/PLL4 multipliers in comments clk: renesas: r8a779h0: Add VIN clocks dt-bindings: clock: renesas,rzg2l-cpg: Update description for #reset-cells clk: renesas: rcar-gen2: Use DEFINE_SPINLOCK() for static spinlock clk: renesas: cpg-lib: Use DEFINE_SPINLOCK() for global spinlock clk: renesas: r8a77970: Use common cpg_lock clk: renesas: r8a779h0: Add CSI-2 clocks clk: renesas: r8a779h0: Add ISPCS clocks * clk-amlogic: clk: meson: add missing MODULE_DESCRIPTION() macros dt-bindings: clock: meson: a1: peripherals: support sys_pll input dt-bindings: clock: meson: a1: pll: introduce new syspll bindings clk: meson: add 'NOINIT_ENABLED' flag to eliminate init for enabled PLL clk: meson: c3: add c3 clock peripherals controller driver clk: meson: c3: add support for the C3 SoC PLL clock dt-bindings: clock: add Amlogic C3 peripherals clock controller dt-bindings: clock: add Amlogic C3 SCMI clock controller support dt-bindings: clock: add Amlogic C3 PLL clock controller dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format clk: meson: s4: fix pwm_j_div parent clock clk: meson: s4: fix fixed_pll_dco clock * clk-allwinner: clk: sunxi-ng r40: Constify struct regmap_config clk: sunxi-ng: h616: Add clock/reset for GPADC dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks clk: sunxi: Remove unused struct 'gates_data' clk: sunxi-ng: add missing MODULE_DESCRIPTION() macros * clk-samsung: clk: samsung: gs101: mark gout_hsi2_ufs_embd_i_clk_unipro as critical clk: samsung: Switch to use kmemdup_array() clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE |
||
|
Lorenzo Bianconi
|
7aa291962f |
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
Introduce reset capability to EN7581 device-tree clock binding
documentation. Add reset register mapping between misc scu and pb scu
ones in order to follow the memory order. This change is not
introducing any backward compatibility issue since the EN7581 dts is not
upstream yet.
Fixes: 0a382be005cf ("dt-bindings: clock: airoha: add EN7581 binding")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/28fef3e83062d5d71e7b4be4b47583f851a15bf8.1719485847.git.lorenzo@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
||
|
Chris Morgan
|
532857c2a7 |
dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
Add the required clock bindings for the GPADC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240605172049.231108-2-macroalpha82@gmail.com Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Luo Jie
|
80bbd1c355 |
dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
QCA8386/QCA8084 includes the clock & reset controller that is accessed by MDIO bus. Two work modes are supported, qca8386 works as switch mode, qca8084 works as PHY mode. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240605124541.2711467-3-quic_luoj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Stephen Boyd
|
4a35e6fc41 |
Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and 'clk-rockchip' into clk-next
* clk-counted: clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws * clk-imx: clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: imx: add i.MX95 BLK CTL clk driver dt-bindings: clock: support i.MX95 Display Master CSR module dt-bindings: clock: support i.MX95 BLK CTL module dt-bindings: clock: add i.MX95 clock header clk: imx: imx8mp: Add pm_runtime support for power saving * clk-amlogic: clk: meson: s4: fix module autoloading clk: meson: fix module license to GPL only clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF clk: meson: add vclk driver clk: meson: pll: print out pll name when unable to lock it clk: meson: s4: pll: determine maximum register in regmap config clk: meson: s4: peripherals: determine maximum register in regmap config clk: meson: a1: pll: determine maximum register in regmap config clk: meson: a1: peripherals: determine maximum register in regmap config * clk-binding: dt-bindings: clock: fixed: Define a preferred node name * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock clk: rockchip: rk3588: Add reset line for HDMI Receiver clk: rockchip: rk3568: Add missing USB480M_PHY mux dt-bindings: reset: Define reset id used for HDMI Receiver dt-bindings: clock: rockchip: add USB480M_PHY mux |
||
|
Gabriel Fernandez
|
df5df1257c |
dt-bindings: clocks: stm32mp25: add description of all parents
RCC driver uses '.index' to define all parent clocks instead '.names'
because the use of a name to define a parent clock is discouraged. This
is an ABI change, but the RCC driver has not yet merged, unlike all
others drivers besides Linux.
Fixes: b5be49db3d47 ("dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240411092453.243633-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
||
|
Shreeya Patel
|
ca151fd56b |
dt-bindings: reset: Define reset id used for HDMI Receiver
Add reset id used for HDMI Receiver in RK3588 SoCs Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://lore.kernel.org/r/20240327225057.672304-2-shreeya.patel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Linus Torvalds
|
78c3925c04 |
ARM: late SoC changes for 6.9
These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing.
-----BEGIN PGP SIGNATURE-----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=IzoE
-----END PGP SIGNATURE-----
Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
|
||
|
Stephen Boyd
|
68e4ebd542 |
Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and 'clk-microchip' into clk-next
* clk-remove: clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void * clk-amlogic: clk: meson: Add missing clocks to axg_clk_regmaps * clk-qcom: (62 commits) clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller clk: qcom: drop the SC7180 Modem subsystem clock driver clk: qcom: Use qcom_branch_set_clk_en() clk: qcom: branch: Add a helper for setting the enable bit clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks clk: qcom: gcc-msm8953: add more resets clk: qcom: videocc-*: switch to module_platform_driver ... * clk-parent: clk: Fix clk_core_get NULL dereference * clk-microchip: clk: microchip: mpfs: convert MSSPLL outputs to clk_divider clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: split MSSPLL in two dt-bindings: can: mpfs: add missing required clock dt-bindings: clock: mpfs: add more MSSPLL output definitions |
||
|
Frank Wunderlich
|
c9d9bea92c |
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
Add reset constants for using as index in driver and dts. Value is starting again from 0 because resets are used in another device than existing constants. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240201182409.39878-2-linux@fw-web.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Chen Wang
|
41197eb5f9 |
dt-bindings: reset: sophgo: support SG2042
Add bindings for the reset generator on the SOPHGO SG2042 RISC-V SoC. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/r/35c348437b6e18972ccaf90d9c38040caccd1f11.1706577450.git.unicorn_wang@outlook.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Rajendra Nayak
|
bb213e13ce |
dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller
Add bindings documentation for the X1E80100 Graphics Clock Controller. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Linus Torvalds
|
c736c9a955 |
Only a couple new SoCs have support added this time, primarily for Qualcomm
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
||
|
Linus Torvalds
|
f6597d1706 |
SoC: driver updates for 6.8
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
||
|
Stephen Boyd
|
a4dcb2f84b |
Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-next
- Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP * clk-zynq: drivers: clk: zynqmp: update divider round rate logic drivers: clk: zynqmp: calculate closest mux rate * clk-xilinx: clocking-wizard: Add support for versal clocking wizard dt-bindings: clock: xilinx: add versal compatible * clk-stm: dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform clk: stm32mp1: use stm32mp13 reset driver clk: stm32mp1: move stm32mp1 clock driver into stm32 directory |
||
|
Stephen Boyd
|
23bd8c4ad1 |
Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into clk-next
* clk-imx: clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() dt-bindings: clock: support i.MX93 ANATOP clock module * clk-qcom: (41 commits) clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings clk: qcom: gcc-sm8550: Mark RCGs shared where applicable clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag clk: qcom: camcc-sc8280xp: Prevent error pointer dereference clk: qcom: videocc-sm8150: Add runtime PM support clk: qcom: videocc-sm8150: Add missing PLL config property clk: qcom: videocc-sm8150: Update the videocc resets dt-bindings: clock: Update the videocc resets for sm8150 clk: qcom: rpmh: Add support for X1E80100 rpmh clocks clk: qcom: Add Global Clock controller (GCC) driver for X1E80100 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100 dt-bindings: clock: qcom: Add X1E80100 GCC clocks clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000 clk: qcom: branch: Add mem ops support for branch2 clocks ... * clk-amlogic: clk: meson: g12a: add CSI & ISP gates clocks clk: meson: g12a: add MIPI ISP clocks dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids * clk-mediatek: clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: brcm,kona-ccu: convert to YAML dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema dt-bindings: Remove alt_ref from versal |
||
|
Daniel Golle
|
5cfa3beb77 |
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
Add reset ID for ethwarp subsystem allowing to reset the built-in Ethernet switch of the MediaTek MT7988 SoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/0c14bbacf471683af67ffa7572bfa1d5c45a0b5d.1702849494.git.daniel@makrotopia.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Arnd Bergmann
|
2d7123c7e1 |
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with support for the MTP and QRD development devices, the new Snapdragon X Elite compute platform with QCP and CRD development/references devices, the QCS6590/QCM6490 platform with support for the IDP development device and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset built on MSM8939, and Xiaomi Pad 6 on SM8250. On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one additional QUP SPI controller is added. CPU OPP tables are selectively enabled based on fuses, for both IPQ5332 and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes. Common elements of the IPQ9574 RDP boards are refactored into a common include file. IPQ9574 also gains description of its LEDs and WPS busttons. MSM8916 finally gets the DSP-based audio described, and this is enabled for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains notification LED, battery and charger support is added to Loncheer L8150, and GPU is enabled for Samsung Galaxy Tab A. Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is enabled as well. The Longcheer L9100 gains RGB notification LED support, and the wireless subsystem is enabled. Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is enabled, to allow using wakeup interrupts. Interconnect providers, MPM and display are added to QCM2290. UFS, remoteprocs and WiFi is enabled for Fairphone FP5. On Fairphone FP3 audio, WiFi and Bluetooth are enabled. On the Robotics RB1, HDMI and the CAN bus controller are added. On Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled. Bluetooth is enabled on the Robotics RB5. On SA8775P tsens and thermal is added, as well as the random number generator. Sound and RTC support is added for the Acer Aspire 1. On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices to inherit the base dtsi. Support for UFS, crypto, TrustZone based remoteprocs, the Camera Control Interface (CCI) and random number generator support are added. Additionally a variety of smaller fixes are introduced. A variety of fixes are introduced for SC8180X, in particular missing power-domains and interconnects. On SC8280XP the camera clock controller is added, and a number of smaller fixes are introduced. The display subsystem in SDM670 is described. On SDX75 interconnect providers are added, as is USB3 and the related PHY, which is then enabled on the IDP device. On SM6115 interconnect providers are added and existing clients are wired up. A UART controller is added as well. The MPM is added, to provide wakeup interrutps, on SM6375. The modem subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator supplies are corrected. On SM8150 the DisplayPort controller is added, for USB Type-C output, which together with the addition of HDMI is described on the HDK board. GPU and random number generator support are added to SM8450, and enabled on the HDK board. On SM8550 GPU, IPA, random number generator, missing SoundWire ports are added, and enabled on both MTP and QRD devices. Additionally a large number of smaller functional and DeviceTree binding validation issues are corrected across a variety of platforms. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmWBrVoVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fvz8P+gOomLgaY79YUJHjKnJ4ThQGske/ RZFealz1ELsLCKcFMj9UMp4ldyQc6aNNyvTeE/GtO32IfYeA68THwOWvnrr+W84W PLFoS2yfEZpChZTz+IZpaYUblwD6psiJek3E1zSX4YyO4nkQtCUE9x1SfgpzY/Dr 5NUjxIIlkPILSk6X2t9nwYTUZ7ZOr8EAMA39wYbweBCtHMh72aVC1XVQWfIUqAIq 8jhFOhUuWZgs6hpgSJWjxEsEV02aC3dMunuoPEDvPQlrydvlKPAnYnTArDHS6vtW RjXFLmP9PfOSMjz5Sjg5/byEfsMCIulmTsGDZH6h+wc8VGP7IKhOdd9ANL4zPCkW WwF5NeW44ooBgODVYCi9I0kM30u2tJqRLPdJfcFqvL/fAdvmdJsTpKGI3GrdXtUi JqYX861ntTTXN4JlUJE5BRcGDoXXNAFNb/wfwxGNXMAzzs7bV5OxbxG7wmg6rwSa VqH2frDHdWH2FDLCUW0Tbaihmv0c30utbIMkHZOuO2BkFoIHjKVz+ISEFgALUCCF lCIJ4skoKy9dEsrBHDXYHiIA8dUy+zfBp3GQTI4OX3mO7kjUEQeGUrO1LtNeIUK4 lt7Trf7h4TGw8obyR1PepzyaRO8XUSZEHSkunVh6TWtUSJawwMqFL1EH2b1nIcBd 9Kg2DN82vjbeF4vh =WKon -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWFdtsACgkQYKtH/8kJ Uidw4BAAs/KrAQ/Pj3r80xyEQ+pL/Bz0X1g7uCmA/OtuHTvRBw8YirktJ3jaPe4i ex9XbEagPfR9fsjUBPLhrUubLECKDqpdokDvhgLTeXqTvAFWqt7BUfC3E2ompRHH E7mQFkg0vM68Al6JDsOVc2PtmGBvMMK9NK1855ggjJ3qbqD+C65xUd4JoHhgi0x6 jpI31RWlyDFf0XBO7ucha9h2tbzWgv7sA04YlXhLcbCvovLXsPI9lP5UoN5U/AFw Z+bNBwNCcNlhLpYf5iXb2GN1RfTPmHDb+KvBjKAbFbUf2KcBEOCM0Jmr1a4mAR4U oesoEOJ6EQ89rBEJaH3s254FAF1CfcehpVbKU1Qu6xp9XDmdCI6oncBLZZRRqPjd cc6TjNPA6emFz13QLLQ8h1VrtkjE9iHWmtoTb3qJD7Bt+eXNqdlSYeH9fztq5aik /wjNdOzjvChmVWQizBL7u4riNTzYxLg1QqZ29RYdFMkqX75HqcvakbB+54koD2sO bpSN0eiReUxHAYKqPzs7e6rI+CSi/j0LppIMOAkwKckwWRPuajztwUCSZh2DQFvU 73GLZwoxiCLLMliCcGV7rAGO+06YpxglXo7NOEaJoNj6f9mAhpufUTnmQZZgNJZD rzLyqzed3qlbp5HzvRy+pKYz5yUo1eACxrXCsK1o+u++o4UyXWw= =leqb -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 updates for v6.8 Support is added for the new Snapdragon 8 Gen 3 mobile platform, with support for the MTP and QRD development devices, the new Snapdragon X Elite compute platform with QCP and CRD development/references devices, the QCS6590/QCM6490 platform with support for the IDP development device and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset built on MSM8939, and Xiaomi Pad 6 on SM8250. On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one additional QUP SPI controller is added. CPU OPP tables are selectively enabled based on fuses, for both IPQ5332 and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes. Common elements of the IPQ9574 RDP boards are refactored into a common include file. IPQ9574 also gains description of its LEDs and WPS busttons. MSM8916 finally gets the DSP-based audio described, and this is enabled for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains notification LED, battery and charger support is added to Loncheer L8150, and GPU is enabled for Samsung Galaxy Tab A. Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is enabled as well. The Longcheer L9100 gains RGB notification LED support, and the wireless subsystem is enabled. Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is enabled, to allow using wakeup interrupts. Interconnect providers, MPM and display are added to QCM2290. UFS, remoteprocs and WiFi is enabled for Fairphone FP5. On Fairphone FP3 audio, WiFi and Bluetooth are enabled. On the Robotics RB1, HDMI and the CAN bus controller are added. On Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled. Bluetooth is enabled on the Robotics RB5. On SA8775P tsens and thermal is added, as well as the random number generator. Sound and RTC support is added for the Acer Aspire 1. On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices to inherit the base dtsi. Support for UFS, crypto, TrustZone based remoteprocs, the Camera Control Interface (CCI) and random number generator support are added. Additionally a variety of smaller fixes are introduced. A variety of fixes are introduced for SC8180X, in particular missing power-domains and interconnects. On SC8280XP the camera clock controller is added, and a number of smaller fixes are introduced. The display subsystem in SDM670 is described. On SDX75 interconnect providers are added, as is USB3 and the related PHY, which is then enabled on the IDP device. On SM6115 interconnect providers are added and existing clients are wired up. A UART controller is added as well. The MPM is added, to provide wakeup interrutps, on SM6375. The modem subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator supplies are corrected. On SM8150 the DisplayPort controller is added, for USB Type-C output, which together with the addition of HDMI is described on the HDK board. GPU and random number generator support are added to SM8450, and enabled on the HDK board. On SM8550 GPU, IPA, random number generator, missing SoundWire ports are added, and enabled on both MTP and QRD devices. Additionally a large number of smaller functional and DeviceTree binding validation issues are corrected across a variety of platforms. * tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits) arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting arm64: dts: qcom: sc8180x: Describe the GIC redistributor arm64: dts: qcom: sc8180x: Add interconnects to UFS arm64: dts: qcom: sc8180x: Add missing MDP clocks arm64: dts: qcom: sc8180x: Add UFS GDSC arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi arm64: dts: qcom: sc7280: Rename reserved-memory nodes arm64: dts: qcom: sc7280: Remove unused second MPSS reg arm64: dts: qcom: sdm670: add display subsystem arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY arm64: dts: qcom: sm8150: add DisplayPort controller arm64: dts: qcom: sm8150-hdk: fix SS USB regulators arm64: dts: qcom: sm8150-hdk: enable HDMI output arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes arm64: dts: qcom: sm8550-qrd: add PM8010 regulators arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators arm64: dts: qcom: qcm2290: Hook up MPM ... Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Gabriel Fernandez
|
b5be49db3d |
dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
Adds clock and reset binding entries for STM32MP25 SoC family Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231208143700.354785-4-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Hsiao Chien Sung
|
3526cfaed2
|
dt-bindings: reset: mt8188: Add VDOSYS reset control bits
Add MT8188 VDOSYS0 and VDOSYS1 reset control bits. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
||
|
Neil Armstrong
|
a0aa7fa5c3 |
dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller
Add bindings documentation for the SM8650 Graphics Clock Controller. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-4-761a6fadb4c0@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Zelong Dong
|
0c0ea61c9b |
dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller
Add new compatible and DT bindings for Amlogic C3 Reset Controller Signed-off-by: Zelong Dong <zelong.dong@amlogic.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230914064018.18790-2-zelong.dong@amlogic.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Linus Torvalds
|
8f447694c2 |
Devicetree updates for v6.6:
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
||
|
Krzysztof Kozlowski
|
440b075bd2 |
dt-bindings: use capital "OR" for multiple licenses in SPDX
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Arnd Bergmann
|
c708140e96 |
SoCFPGA DTS updates for v6.6
- Fix dtbs_check warnings for usbphy, sram, rstmgr, memory, partitions - Updated "stmmaceth-ocp" reset-names to "ahb" for stmmac ethernet - Add initial support for Agilex5 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmTg5+8ACgkQGZQEC4Gj KPRA7Q/8C6ugL9LlR5JEUruaAugaRnYL2BgotdwhMuCbU7d3oj+pFBzHR8PR/MCI CZXnLehpmwOkGz0K0QLey6nQuGZS18DK19DxJkL46hr69Rqpu8XHb2yPjiBtbh/o 0ZwpxuRTKz1QbP9hprw/RIHSbZ/AWaI2O/90xicC0p1qWXmxSz0Kv6YOoQ61o/yO On91yS3R+75o1NoHD+FoKiPuwwTfaHc7TrS/UIshPKAuk6yo/Cd3Is5EdYL+5xEz kXDRkt2X3g7il/Jm9AOFJvA4Q1VLD9Ke4C9o9ePvj167GklaLnJ9JT8Qw7PGXaoE wolse2+bJA4a9acPbkYmYSSyyKtZnIgV5oTXFgeWQ0eo0qmoTNqgx6eMIOyRltxs 3OTTvNyw9+ZOhW4YRv/lJWwDL3uMlKsMV/2JOSPua5V4kXrPi/A+HhIZGDll1Naf y+HYNoJiSrDAiNYwWglz4f4LR+xU3wc3cS4uLrAU+aCE+NHYAj/Jqn8/EC26NDbQ wVsPfQMQN9j0wCrMzZZf4LUEYM6C90ZeqUFqwB6mqctfAbT/fQyLdyKL8Gu/QrG0 lhp2J4vb2UJ9eQ1zBoBtb6flcQegHP/ybmRM4Q5ep3LvVOHhilZT5mO8mj36q84g 3Co2RqQ8oknTgmxTF93jguAW+JPtmfvwA66x+CetC0fSmSWN2HI= =OfJk -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkFA0ACgkQYKtH/8kJ UiejLBAAnafzyrMqZnO6nc6hvK/7ONSN2QZqaYoZ0Ho6fSvz5KxqVqPjUq4EshEZ HB9kZ42YvJQZYyi8Pvd/7BIQe3WvwLZ6tW4NALoiMsfpL127wzfwJlDj5yOiltLu aZtwhRvRV7jHKlh06wh8eax3vd4P3ozR5DUufcCJp59xI8MTS2UYI6enrIoA2h06 uC0xWhuEvseHdzYQbC2hAZlZA1Z/7BBYCJO5iKq5cdW0zHpy0h7h2k3ba2M2BsZM JtaIIyrjjF70nmydNY9UfHt0iU3u5InbZ7GdJEc9kkGsbB4fLiSUdn8ScPXShXaY W4qhsLQ9DhyDlkb+xmzkt2FRH9gh98xe2Ej4CmZM/4X3Xc/g+kquGZ4kHllNHJK5 AWodtDcrio3V7eCmiGerSBdvChr6pB31qVpuaCaiuCr+OpPZGdj/Z2c0qjCDo9h6 Pn8sH8jVgye3AQ30NmSrpJz12tN/H86BeiW59eFeJ3jRXi8qx7oMyyuLVNDzo+sF 6EkydHcSNrl0HF2gKQRSFMLvYfaYUZFBA/iSycrn24UjKc86DWd3aGbcofQSbJOV WeZAODlghXX9/R6yVKf4Vt/O6m3Lb2xreCilkIKJD5wpdQAu8hz7NXJAMtNJY1ed MKASPnHm1jP6Is/6acr5pDYFpbG3HOsyOxpzNQYRVHEFElMxQSk= =mFST -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.6 - Fix dtbs_check warnings for usbphy, sram, rstmgr, memory, partitions - Updated "stmmaceth-ocp" reset-names to "ahb" for stmmac ethernet - Add initial support for Agilex5 * tag 'socfpga_dts_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA dt-bindings: clock: add Intel Agilex5 clock manager dt-bindings: reset: add reset IDs for Agilex5 dt-bindings: intel: Add Intel Agilex5 compatible arm64: dts: socfpga: change the reset-name of "stmmaceth-ocp" to "ahb" arm64: dts: socfpga: n5x/stratix10: fix dtbs_check warning for partitions arm64: dts: agilex/stratix10: Updated QSPI Flash layout for UBIFS arm64: dts: agilex/stratix10/n5x: fix dtbs_check for rstmgr arm64: dts: stratix10/agilex/n5x: fix dtbs_check warning for memory node arm64: dts: socfpga: stratix10: fix dtbs_check warning for usbphy arm64: dts: socfpga: agilex/stratix10: fix dtbs_check warnings for sram Link: https://lore.kernel.org/r/20230819161418.931258-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
6522fbd48a |
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is added. The IPQ5018 platform is introduced, and the RDP432-C2 board thereon. A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based LEDs and buttons. On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added. On MSM8916, the D3 camera mezzanine is improved and refactored out to its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with charger, while Samsung Galaxy J5 and E5 gains touchscreen support. A few fixes for MSM8939 are introduced, and initial support for Samsung Galaxy A7 is add. Support for scaling the cache bus fabric is introduced on MSM8996. A missing interrupt for the USB2 controller is added. The touchscreen vio supply on Xiaomi Mi 5 is corrected, and a few other cleanups are introduces across other devices. The display controller is introduced for MSM8998, a few clock fixes are introduced and missing power domains are added for the multimedia subsystem iommu. Reserved memory-regions and reserved GPIO lists are updated for the QDU/QRU1000 IDPs. USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is enabled for the RB2. PCIe and Ethernet support is introduced on SA8775P, and enabled for the Ride board. On SC7180 the PSCI integration is refactored, to allow supporting devices with the Qualcomm firmware. BWMON is introduced, alongside the CPUfreq-based bus voting. A number of fixes are added for SC8180X, on the Primus and Lenovo Flex 5G devices pmic_glink is introduced and wired up, to provide support for external display. Missing SCM interconnect is added to SC8280XP, and the PDC is marked as wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is corrected and a few regulators are renamed to align with schematics. The Lenovo Thinkpad X13s gains camera activity LED and a set of previously reserved GPIOs are released. The SA8540P Ride platform gains RTC support. For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced and wired up as wakeup-parent of the TLMM. On SDM845 the UFS controller gains interconnect path description, power-domain information is added to GCC and minimum frequency of the UFS ICE is corrected. On RB3 continuous splash memory region is described, and the camera subsystem is enabled. On the Lenovo Yoga C630 a missing power supply for the display panel is added, and the debug UART is introduced. SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75 PMIC is described and added to the IDP. GPU description is added to SM6115, and together with display enabled on the Lenovo Tab P11. On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU is added, and the PDC is registered as wakeup-parent of TLMM. L3 cache scaling is introduced on SM6375. The DSI PHY compatible and an interrupt for I2C7 are corrected for SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected. On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node gains interconnect paths, SMMU is marked as DMA coherent and dynamic power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line names are updated. On SM8350 missing cluster sleep states and LMH interrupts are added, the CPU compatibles are corrected and APR and LPASS pinctrl support is introduced. The HDK gains uSD card support and PMK8350 is added. For SM8450 support for RNG and RPMh stats are added, the ICE handling is extracted from the UFS node and the display subsystem gains a missing interconnect path. Thermal description is improved for the HDK. On SM8550 MTP and QRD the pmic_glink is introduced, to provide DisplayPort output. A missing regulator supply is also added. A few platforms that happens to share the RPMH power-domain resource identifier constants are migrated to new generic defines. ADC channel names are generalized on various PMICs. A variety of devices gain chassis-type, and the GIC_SPI constant is replacing the 0 across a few different platforms. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTgOtYVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fr20P/jDKWelSMYqeVFfa49XGXyvRwWmf TaSb8IlD9cqQ3ScFYwmJGf2gVqt7zBfGU2EoxkMbpFeGjyZZYpw86Y3fvU1A5oxy TQ++kBQAvuSGEUqdGE7Xv6lIUmKPyVmcayRpI6IgGI5iaU1y5bI6xmh3bjhL//NQ mcsH11SLPPvDyZ608Etvw1rNtPImSI8nOucaBSlmnkxT1NuzIjPhNG+rNwgBSBHU O8sKi80hYrVw78sR3sXH+cBCCMhkFg377maCo9ZE14TFdAT3Ggn2uXX01PXCvn1z cO/wFAZ5vOe4KU1+maWkvOsEOCqjghdFUoVK7e9xtMpeuhoXjAuFf1L26d02mOK3 I48/apsj8ak/kmC89eo1RrOWniytI+YGPZwd5wYIOh0Q2oS8+IpC0nZhm9V86IIU DoWxbdf0TZ++e3D232AftFqKutbL9utJanq9l34zmI50F7QK4BSbBRKT81pRTrml y4tR7bukrGYKVRq3Kpf5vyWwPEpYIfZ7o9k6J56IcaLoaMvctW/vcnf8R0Qr5gJb 3vHUEBsozERKd2NcFw9g1Ay86DbAxC+3wyfHHMWgolA7fYCNVSXN6R6hKXb6d503 6ORnP4U6NjxpibIXC3jj+zmvbUM/GhSgrw3yErPb83n9P9pJ5Aw2+6J+Xmt75U5z 9hyHUWkbhyNQqBVA =uK0C -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTkEYEACgkQYKtH/8kJ Uie31xAAvhedx3cixHT570K/qxw8tTM06btXNhEek+/oMiW5eCcGKCRW5ixcpPog 9sLGI4xt5aMVdJshIYWovCDpCQWCoSYiqFx9N2/2zF+DrXYjeKNCpU6oVcPh1MG7 Xm5Fy2s99BipT6z6ha5kqeirdgjH+po8Jtkw54AfROzJa2oTD6GBvsPtxxW3CYgJ lDoHTvU59gwl1Dk60FIkc2slyA57VqqRuVLAmurgO2nGOFU9FODb/lNuMIh8AeKt +scXrEVozQPDeefSCbKTqROBvIuYyMbXmFHLW+VmM9EgXnOcV2IEVOSZCiMYi9Ic RWpfOHVAn9xM/zFhHh23onJPUrISwcJv05A1PU92WFNWh7uoly67KD712gPStwmd /rKI25DPk3Z7nc7LwzO5VqovOpU9Q0t+/NDOLiRn1A8/hljqVMhq8eTo9AY9sBJN EW5AZw1KUzrXH+9RQsNKDAJckpfgDaI8sB+ueXOZMHHhhKaugMILp/PgpN6isQZu G7ZkJadpQBliJ3pvsHpK6JlXcJoB4TafIx7pJPDCHbAFOnMhCmEUPW7TX36n0uQ3 4d/ghMENBmDWkmZGlFLtl7SfKNmuT/HQhcG75QZxqPiw/uhRGepNaswqtkpMMeFD Vl+spE5wosXSG8Ra2W/UJfNfEKYL1TKevPwJXZWmT9WUehMSG+U= =zUL1 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.6 Initial support for the SM4450 platform and the QRD device thereon is added. The IPQ5018 platform is introduced, and the RDP432-C2 board thereon. A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based LEDs and buttons. On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added. On MSM8916, the D3 camera mezzanine is improved and refactored out to its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with charger, while Samsung Galaxy J5 and E5 gains touchscreen support. A few fixes for MSM8939 are introduced, and initial support for Samsung Galaxy A7 is add. Support for scaling the cache bus fabric is introduced on MSM8996. A missing interrupt for the USB2 controller is added. The touchscreen vio supply on Xiaomi Mi 5 is corrected, and a few other cleanups are introduces across other devices. The display controller is introduced for MSM8998, a few clock fixes are introduced and missing power domains are added for the multimedia subsystem iommu. Reserved memory-regions and reserved GPIO lists are updated for the QDU/QRU1000 IDPs. USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is enabled for the RB2. PCIe and Ethernet support is introduced on SA8775P, and enabled for the Ride board. On SC7180 the PSCI integration is refactored, to allow supporting devices with the Qualcomm firmware. BWMON is introduced, alongside the CPUfreq-based bus voting. A number of fixes are added for SC8180X, on the Primus and Lenovo Flex 5G devices pmic_glink is introduced and wired up, to provide support for external display. Missing SCM interconnect is added to SC8280XP, and the PDC is marked as wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is corrected and a few regulators are renamed to align with schematics. The Lenovo Thinkpad X13s gains camera activity LED and a set of previously reserved GPIOs are released. The SA8540P Ride platform gains RTC support. For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced and wired up as wakeup-parent of the TLMM. On SDM845 the UFS controller gains interconnect path description, power-domain information is added to GCC and minimum frequency of the UFS ICE is corrected. On RB3 continuous splash memory region is described, and the camera subsystem is enabled. On the Lenovo Yoga C630 a missing power supply for the display panel is added, and the debug UART is introduced. SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75 PMIC is described and added to the IDP. GPU description is added to SM6115, and together with display enabled on the Lenovo Tab P11. On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU is added, and the PDC is registered as wakeup-parent of TLMM. L3 cache scaling is introduced on SM6375. The DSI PHY compatible and an interrupt for I2C7 are corrected for SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected. On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node gains interconnect paths, SMMU is marked as DMA coherent and dynamic power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line names are updated. On SM8350 missing cluster sleep states and LMH interrupts are added, the CPU compatibles are corrected and APR and LPASS pinctrl support is introduced. The HDK gains uSD card support and PMK8350 is added. For SM8450 support for RNG and RPMh stats are added, the ICE handling is extracted from the UFS node and the display subsystem gains a missing interconnect path. Thermal description is improved for the HDK. On SM8550 MTP and QRD the pmic_glink is introduced, to provide DisplayPort output. A missing regulator supply is also added. A few platforms that happens to share the RPMH power-domain resource identifier constants are migrated to new generic defines. ADC channel names are generalized on various PMICs. A variety of devices gain chassis-type, and the GIC_SPI constant is replacing the 0 across a few different platforms. * tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits) arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins arm64: dts: qcom: msm8998: Add DPU1 nodes arm64: dts: qcom: msm8996: Fix dsi1 interrupts arm64: dts: qcom: sdx75-idp: Add regulator nodes arm64: dts: qcom: sdx75: Add rpmhpd node arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75 arm64: dts: qcom: Add pmx75 PMIC dtsi arm64: dts: qcom: Add pm7550ba PMIC dtsi arm64: dts: qcom: Add pinctrl gpio support for pm7250b arm64: dts: qcom: sdx75: Add spmi node arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU ... Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Sricharan Ramabadhran
|
f62d184ef7 |
dt-bindings: clock: Add IPQ5018 clock and reset
This patch adds support for the global clock controller found on the IPQ5018 based devices. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Niravkumar L Rabara
|
2a29fe831f |
dt-bindings: reset: add reset IDs for Agilex5
Add reset ID definitions required for Intel Agilex5 SoCFPGA, re-use altr,rst-mgr-s10.h as common header file similar S10 & Agilex. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> |
||
|
Xingyu Wu
|
a097a5ec14 |
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
Add bindings for the Video-Output clock and reset generator (VOUTCRG) on the JH7110 RISC-V SoC by StarFive Ltd. Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Xingyu Wu
|
9b3938c0b8 |
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
Add bindings for the Image-Signal-Process clock and reset generator (ISPCRG) on the JH7110 RISC-V SoC by StarFive Ltd. Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Xingyu Wu
|
14b14a57e6 |
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
Add bindings for the System-Top-Group clock and reset generator (STGCRG) on the JH7110 RISC-V SoC by StarFive Ltd. Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Linus Torvalds
|
b869e9f499 |
Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove "syscon" from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window
-----BEGIN PGP SIGNATURE-----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=cF5c
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
|
||
|
Linus Torvalds
|
a9025a5f16 |
ARM: New SoC support for 6.5
There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS 8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA 2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81 F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo= =zaVi -----END PGP SIGNATURE----- Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ... |
||
|
Linus Torvalds
|
6c1561fb90 |
ARM: SoC devicetree updates for 6.5
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----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=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
||
|
Stephen Boyd
|
82e58e69d7 |
Merge branches 'clk-qcom' and 'clk-microchip' into clk-next
* clk-qcom: (63 commits) clk: qcom: gcc-sc8280xp: Add runtime PM clk: qcom: gpucc-sc8280xp: Add runtime PM clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags clk: qcom: gpucc-sm6375: Enable runtime pm dt-bindings: clock: sm6375-gpucc: Add VDD_GX clk: qcom: gcc-sm6115: Add missing PLL config properties clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi) clk: qcom: gcc-ipq6018: remove duplicate initializers clk: qcom: gcc-ipq9574: Enable crypto clocks dt-bindings: clock: Add crypto clock and reset definitions clk: qcom: Add lpass audio clock controller driver for SC8280XP clk: qcom: Add lpass clock controller driver for SC8280XP dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226 clk: qcom: gpucc-sm8550: Add support for graphics clock controller clk: qcom: Add support for SM8450 GPUCC clk: qcom: gcc-sm8450: Enable hw_clk_ctrl clk: qcom: rcg2: Make hw_clk_ctrl toggleable dt-bindings: clock: qcom: Add SM8550 graphics clock controller ... * clk-microchip: clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id clk: at91: sama7g5: switch to parent_hw and parent_data clk: at91: sckc: switch to parent_data/parent_hw clk: at91: clk-sam9x60-pll: add support for parent_hw clk: at91: clk-utmi: add support for parent_hw clk: at91: clk-system: add support for parent_hw clk: at91: clk-programmable: add support for parent_hw clk: at91: clk-peripheral: add support for parent_hw clk: at91: clk-master: add support for parent_hw clk: at91: clk-generated: add support for parent_hw clk: at91: clk-main: add support for parent_data/parent_hw |
||
|
Stephen Boyd
|
b9a40506a2 |
Merge branches 'clk-imx', 'clk-microchip', 'clk-cleanup', 'clk-bindings', 'clk-ti' and 'clk-kasprintf' into clk-next
- Handle allocation failures from kasprintf() and friends
* clk-imx:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
* clk-microchip:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
* clk-cleanup:
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: mvebu: Use of_address_to_resource()
clk: tegra: tegra124-emc: Fix potential memory leak
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
clk: sifive: Use devm_platform_ioremap_resource()
* clk-bindings:
dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
* clk-ti:
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
* clk-kasprintf:
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
|
||
|
Patrick Delaunay
|
94ec3d8b20 |
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
Minor cosmetic change, aligned with files in U-Boot: - change obsolete SPDX id : GPL-2.0+ and use the same license GPL-2.0-only for the 2 files - use correct mail address gabriel.fernandez@foss.st.com - remove extra space Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20230510184305.v2.1.I417093ddcea282be479f10a37147d1935a9050b7@changeid Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Bjorn Andersson
|
004823da9b |
Merge branch '20230526161129.1454-2-quic_anusha@quicinc.com' into clk-for-6.5
Merge the DeviceTree binding updates for IPQ9574 GCC adding clocks and resets related to Crypto Engine, through a topic branch in order to make them available in the DeviceTree source tree as well. |
||
|
Bjorn Andersson
|
e5d57e7c94 |
Merge branch '20230526161129.1454-2-quic_anusha@quicinc.com' into arm64-for-6.5
Merge IPQ9574 Crypto Engine-related DeviceTree bindings, to gain the additional clock defines needed to add the related nodes. |