Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
Currently FFI integer types are defined in libcore. This commit creates
the `ffi` crate and asks bindgen to use that crate for FFI integer types
instead of `core::ffi`.
This commit is preparatory and no type changes are made in this commit
yet.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net
[ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of
`rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate
docs slightly and formatted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This allows modules to be initialised in-place in pinned memory, which
enables the usage of pinned types (e.g., mutexes, spinlocks, driver
registrations, etc.) in modules without any extra allocations.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20241022213221.2383-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the rusttest target for the macros crate is compiled with the
kernel crate as a dependency, the rest of the rustdoc tests can be
enabled.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-5-ethan.twardy@gmail.com
[ Rebased (use `K{Box,Vec}` instead, enable `lint_reasons` feature).
Remove unneeded `rust` as language in examples, as well as
`#[macro_use]` `extern`s. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
According to the rustdoc for the proc_macro crate[1], tokens captured
from a "macro variable" (e.g. from within macro_rules!) may be delimited
by invisible tokens and be contained within a proc_macro::Group.
Previously, this scenario was not handled by macros::paste, which caused
a proc-macro panic when the corresponding tests are enabled. Enable the
tests, and handle this case by making macros::paste::concat recursive.
Link: https://doc.rust-lang.org/stable/proc_macro/enum.Delimiter.html [1]
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-4-ethan.twardy@gmail.com
[ Rebased (one fix was already applied) and reworded. Remove unneeded
`rust` as language in examples. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, these tests were ignored due to a missing necessary dependency
on the `kernel` crate. Enable the tests, and update them: for both,
add the parameter to `init()`; for the first one, remove the use of a
kernel parameter mechanism that was never merged.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-3-ethan.twardy@gmail.com
[ Rebased (moved the `export` to the `rustdoc_test` rule, enable the
firmware example too). Removed `export` for `RUST_MODFILE`. Removed
unneeded `rust` language in examples, as well as `#[macro_use]`
`extern`s. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, the rusttest target for the macros crate did not specify
the dependencies necessary to run the rustdoc tests. These tests rely on
the kernel crate, so add the dependencies.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-2-ethan.twardy@gmail.com
[ Rebased (`alloc` is gone nowadays, sysroot handling is simpler) and
simplified (reused `rustdoc_test` rule instead of adding a new one,
no need for `rustdoc-compiler_builtins`, removed unneeded `macros`
explicit path). Made `vtable` example fail (avoiding to increase
the complexity in the `rusttest` target). Removed unstable
`-Zproc-macro-backtrace` option. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
One of the example in this section uses a curious mix of the constant
and function declaration syntaxes; fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 823d4737d4 ("rust: macros: add `paste!` proc macro")
Link: https://lore.kernel.org/r/20241019072208.1016707-1-pbonzini@redhat.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we got the kernel `Vec` in place, convert all existing `Vec`
users to make use of it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-20-dakr@kernel.org
[ Converted `kasan_test_rust.rs` too, as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we got the kernel `Box` type in place, convert all existing
`Box` users to make use of it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-13-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool
warnings), teach objtool about 'noreturn' Rust symbols and mimic
'___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be
objtool-warning-free, so enable it to run for all Rust object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on change.
- Split helpers file into several files in a folder, to avoid conflicts
in it. Eventually those files will be moved to the right places with
the new build system. In addition, remove the need to manually export
the symbols defined there, reusing existing machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc'
exists using an atomic), 'ListLinks' (the prev/next pointers for an
item in a linked list), 'List' (the linked list itself), 'Iter' (an
iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows
to remove elements), 'ListArcField' (a field exclusively owned by a
'ListArc'), as well as support for heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the upcoming
Rust Binder. This includes 'RBTree' (the red-black tree itself),
'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation
for a node), 'Iter' and 'IterMut' (immutable and mutable iterators),
'Cursor' (bidirectional cursor that allows to remove elements), as
well as an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite'
trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=52BN
-----END PGP SIGNATURE-----
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
With the `RUSTC_VERSION_TEXT` rebuild support in place, now proc macros
can depend on that instead of `core.o`.
This means that both the `core` and `macros` crates can be built in
parallel, and that touching `core.o` does not trigger a rebuild of the
proc macros.
This could be accomplished using the same approach as for `core`
(i.e. depending directly on `include/config/RUSTC_VERSION_TEXT`). However,
that is considered an implementation detail [1], and thus it is best
to avoid it. Instead, let fixdep find a string that we explicitly
write down in the source code for this purpose (like it is done for
`include/linux/compiler-version.h`), which we can easily do (unlike for
`core`) since this is our own source code.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQBG0nDupXSgAAk-6nOqeqGVkr3H1RjYaqRJ1OxmLm6xA@mail.gmail.com/ [1]
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e039: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the equivalent of the `___ADDRESSABLE()` annotation in the
`module_{init,exit}` macros to the Rust `module!` macro.
Without this, `objtool` would complain if enabled for Rust (under IBT
builds), e.g.:
samples/rust/rust_print.o: warning: objtool: cleanup_module(): not an indirect call target
samples/rust/rust_print.o: warning: objtool: init_module(): not an indirect call target
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
A new style lint, `doc_lazy_continuation` [1], has been introduced in the
upcoming Rust 1.80 (currently in beta), which detects missing indentation
in code documentation.
We have one such case:
error: doc list item missing indentation
--> rust/macros/lib.rs:315:5
|
315 | /// default the span of the `[< >]` group is used.
| ^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
= note: `-D clippy::doc-lazy-continuation` implied by `-D clippy::style`
= help: to override `-D clippy::style` add `#[allow(clippy::doc_lazy_continuation)]`
help: indent this line
|
315 | /// default the span of the `[< >]` group is used.
| ++
While the rendering of the docs by `rustdoc` is not affected, we apply
this kind of indentation elsewhere since it looks better.
Thus clean it up.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/doc_lazy_continuation [1]
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This adds 'firmware' field support to module! macro, corresponds to
MODULE_FIRMWARE macro. You can specify the file names of binary
firmware that the kernel module requires. The information is embedded
in the modinfo section of the kernel module. For example, a tool to
build an initramfs uses this information to put the firmware files
into the initramfs image.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240501123548.51769-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove the mention of byte array as datatype for `module` macro arguments
since the arguments are defined as string, and `alias` is a string array.
Signed-off-by: Aswin Unnikrishnan <aswinunni01@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240512112324.8514-2-aswinunni01@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add example for `alias` argument supported by `module` macro.
`alias` accepts an array of alternate names for the module as string.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Aswin Unnikrishnan <aswinunni01@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240512112324.8514-1-aswinunni01@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The most notable change is the drop of the 'alloc' in-tree fork. This
is nicely reflected in the diffstat as a ~10k lines drop. In turn, this
makes the version upgrades way simpler and smaller in the future, e.g.
the latest one in commit 56f64b3706 ("rust: upgrade to Rust 1.78.0").
More importantly, this increases the chances that a newer compiler
version just works, which in turn means supporting several compiler
versions is easier now. Thus we will look into finally setting a minimum
version in the near future.
Toolchain and infrastructure:
- Upgrade to Rust 1.78.0.
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove one
more unstable feature ('offset_of') from the list, among other
improvements.
- Drop 'alloc' in-tree fork of the standard library crate, which means
all the unstable features used by 'alloc' (~30 language ones, ~60
library ones) are not a concern anymore.
- Support DWARFv5 via the '-Zdwarf-version' flag.
- Support zlib and zstd debuginfo compression via the
'-Zdebuginfo-compression' flag.
'kernel' crate:
- Support allocation flags ('GFP_*'), particularly in 'Box' (via
'BoxExt'), 'Vec' (via 'VecExt'), 'Arc' and 'UniqueArc', as well as in
the 'init' module APIs.
- Remove usage of the 'allocator_api' unstable feature.
- Remove 'try_' prefix in allocation APIs' names.
- Add 'VecExt' (an extension trait) to be able to drop the 'alloc'
fork.
- Add the '{make,to}_{upper,lower}case()' methods to 'CStr'/'CString'.
- Add the 'as_ptr' method to 'ThisModule'.
- Add the 'from_raw' method to 'ArcBorrow'.
- Add the 'into_unique_or_drop' method to 'Arc'.
- Display column number in the 'dbg!' macro output by applying the
equivalent change done to the standard library one.
- Migrate 'Work' to '#[pin_data]' thanks to the changes in the 'macros'
crate, which allows to remove an unsafe call in its 'new' associated
function.
- Prevent namespacing issues when using the '[try_][pin_]init!' macros
by changing the generated name of guard variables.
- Make the 'get' method in 'Opaque' const.
- Implement the 'Default' trait for 'LockClassKey'.
- Remove unneeded 'kernel::prelude' imports from doctests.
- Remove redundant imports.
'macros' crate:
- Add 'decl_generics' to 'parse_generics()' to support default values,
and use that to allow them in '#[pin_data]'.
Helpers:
- Trivial English grammar fix.
Documentation:
- Add section on Rust Kselftests to the "Testing" document.
- Expand the "Abstractions vs. bindings" section of the "General
Information" document.
-----BEGIN PGP SIGNATURE-----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=j6/D
-----END PGP SIGNATURE-----
Merge tag 'rust-6.10' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The most notable change is the drop of the 'alloc' in-tree fork. This
is nicely reflected in the diffstat as a ~10k lines drop. In turn,
this makes the version upgrades way simpler and smaller in the future,
e.g. the latest one in commit 56f64b3706 ("rust: upgrade to Rust
1.78.0").
More importantly, this increases the chances that a newer compiler
version just works, which in turn means supporting several compiler
versions is easier now. Thus we will look into finally setting a
minimum version in the near future.
Toolchain and infrastructure:
- Upgrade to Rust 1.78.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
one more unstable feature ('offset_of') from the list, among other
improvements
- Drop 'alloc' in-tree fork of the standard library crate, which
means all the unstable features used by 'alloc' (~30 language ones,
~60 library ones) are not a concern anymore
- Support DWARFv5 via the '-Zdwarf-version' flag
- Support zlib and zstd debuginfo compression via the
'-Zdebuginfo-compression' flag
'kernel' crate:
- Support allocation flags ('GFP_*'), particularly in 'Box' (via
'BoxExt'), 'Vec' (via 'VecExt'), 'Arc' and 'UniqueArc', as well as
in the 'init' module APIs
- Remove usage of the 'allocator_api' unstable feature
- Remove 'try_' prefix in allocation APIs' names
- Add 'VecExt' (an extension trait) to be able to drop the 'alloc'
fork
- Add the '{make,to}_{upper,lower}case()' methods to 'CStr'/'CString'
- Add the 'as_ptr' method to 'ThisModule'
- Add the 'from_raw' method to 'ArcBorrow'
- Add the 'into_unique_or_drop' method to 'Arc'
- Display column number in the 'dbg!' macro output by applying the
equivalent change done to the standard library one
- Migrate 'Work' to '#[pin_data]' thanks to the changes in the
'macros' crate, which allows to remove an unsafe call in its 'new'
associated function
- Prevent namespacing issues when using the '[try_][pin_]init!'
macros by changing the generated name of guard variables
- Make the 'get' method in 'Opaque' const
- Implement the 'Default' trait for 'LockClassKey'
- Remove unneeded 'kernel::prelude' imports from doctests
- Remove redundant imports
'macros' crate:
- Add 'decl_generics' to 'parse_generics()' to support default
values, and use that to allow them in '#[pin_data]'
Helpers:
- Trivial English grammar fix
Documentation:
- Add section on Rust Kselftests to the 'Testing' document
- Expand the 'Abstractions vs. bindings' section of the 'General
Information' document"
* tag 'rust-6.10' of https://github.com/Rust-for-Linux/linux: (31 commits)
rust: alloc: fix dangling pointer in VecExt<T>::reserve()
rust: upgrade to Rust 1.78.0
rust: kernel: remove redundant imports
rust: sync: implement `Default` for `LockClassKey`
docs: rust: extend abstraction and binding documentation
docs: rust: Add instructions for the Rust kselftest
rust: remove unneeded `kernel::prelude` imports from doctests
rust: update `dbg!()` to format column number
rust: helpers: Fix grammar in comment
rust: init: change the generated name of guard variables
rust: sync: add `Arc::into_unique_or_drop`
rust: sync: add `ArcBorrow::from_raw`
rust: types: Make Opaque::get const
rust: kernel: remove usage of `allocator_api` unstable feature
rust: init: update `init` module to take allocation flags
rust: sync: update `Arc` and `UniqueArc` to take allocation flags
rust: alloc: update `VecExt` to take allocation flags
rust: alloc: introduce the `BoxExt` trait
rust: alloc: introduce allocation flags
rust: alloc: remove our fork of the `alloc` crate
...
Remove argument `params` from the `module` macro example, because the
macro does not currently support module parameters since it was not sent
with the initial merge.
Signed-off-by: Aswin Unnikrishnan <aswinunni01@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org
Fixes: 1fbde52bde ("rust: add `macros` crate")
Link: https://lore.kernel.org/r/20240419215015.157258-1-aswinunni01@gmail.com
[ Reworded slightly. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `module!` macro creates glue code that are called by C to initialize
the Rust modules using the `Module::init` function. Part of this glue
code are the local functions `__init` and `__exit` that are used to
initialize/destroy the Rust module.
These functions are safe and also visible to the Rust mod in which the
`module!` macro is invoked. This means that they can be called by other
safe Rust code. But since they contain `unsafe` blocks that rely on only
being called at the right time, this is a soundness issue.
Wrap these generated functions inside of two private modules, this
guarantees that the public functions cannot be called from the outside.
Make the safe functions `unsafe` and add SAFETY comments.
Cc: stable@vger.kernel.org
Reported-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/629
Fixes: 1fbde52bde ("rust: add `macros` crate")
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240401185222.12015-1-benno.lossin@proton.me
[ Moved `THIS_MODULE` out of the private-in-private modules since it
should remain public, as Dirk Behme noticed [1]. Capitalized comments,
avoided newline in non-list SAFETY comments and reworded to add
Reported-by and newline. ]
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/x/near/433512583 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add support for generic parameters defaults in `#[pin_data]` by using
the newly introduced `decl_generics` instead of the `impl_generics`.
Before this would not compile:
#[pin_data]
struct Foo<const N: usize = 0> {
// ...
}
because it would be expanded to this:
struct Foo<const N: usize = 0> {
// ...
}
const _: () = {
struct __ThePinData<const N: usize = 0> {
__phantom: ::core::marker::PhantomData<fn(Foo<N>) -> Foo<N>>,
}
impl<const N: usize = 0> ::core::clone::Clone for __ThePinData<N> {
fn clone(&self) -> Self {
*self
}
}
// [...] rest of expansion omitted
};
The problem is with the `impl<const N: usize = 0>`, since that is
invalid Rust syntax. It should not mention the default value at all,
since default values only make sense on type definitions.
The new `impl_generics` do not contain the default values, thus
generating correct Rust code.
This is used by the next commit that puts `#[pin_data]` on
`kernel::workqueue::Work`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The generic parameters on a type definition can specify default values.
Currently `parse_generics()` cannot handle this though. For example when
parsing the following generics:
<T: Clone, const N: usize = 0>
The `impl_generics` will be set to `T: Clone, const N: usize = 0` and
`ty_generics` will be set to `T, N`. Now using the `impl_generics` on an
impl block:
impl<$($impl_generics)*> Foo {}
will result in invalid Rust code, because default values are only
available on type definitions.
Therefore add parsing support for generic parameter default values using
a new kind of generics called `decl_generics` and change the old
behavior of `impl_generics` to not contain the generic parameter default
values.
Now `Generics` has three fields:
- `impl_generics`: the generics with bounds
(e.g. `T: Clone, const N: usize`)
- `decl_generics`: the generics with bounds and default values
(e.g. `T: Clone, const N: usize = 0`)
- `ty_generics`: contains the generics without bounds and without
default values (e.g. `T, N`)
`impl_generics` is designed to be used on `impl<$impl_generics>`,
`decl_generics` for the type definition, so `struct Foo<$decl_generics>`
and `ty_generics` whenever you use the type, so `Foo<$ty_generics>`.
Here is an example that uses all three different types of generics:
let (Generics { decl_generics, impl_generics, ty_generics }, rest) = parse_generics(input);
quote! {
struct Foo<$($decl_generics)*> {
// ...
}
impl<$impl_generics> Foo<$ty_generics> {
fn foo() {
// ...
}
}
}
The next commit contains a fix to the `#[pin_data]` macro making it
compatible with generic parameter default values by relying on this new
behavior.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently Rust kernel modules have their init code placed in the `.text`
section of the .ko file. I don't think this causes any real problems
for Rust modules as long as all code called during initialization lives
in `.text`.
However, if a Rust `init_module()` function (that lives in `.text`)
calls a function marked with `__init` (in C) or
`#[link_section = ".init.text"]` (in Rust), then a warning is
generated by modpost because that function lives in `.init.text`.
For example:
WARNING: modpost: fs/bcachefs/bcachefs: section mismatch in reference: init_module+0x6 (section: .text) -> _RNvXCsj7d3tFpT5JS_15bcachefs_moduleNtB2_8BcachefsNtCsjDtqRIL3JAG_6kernel6Module4init (section: .init.text)
I ran into this while experimenting with converting the bcachefs kernel
module from C to Rust. The module's `init()`, written in Rust, calls C
functions like `bch2_vfs_init()` which are placed in `.init.text`.
This patch places the macro-generated `init_module()` Rust function in
the `.init.text` section. It also marks `init_module()` as unsafe--now
it may not be called after module initialization completes because it
may be freed already.
Note that this is not enough on its own to actually get all the module
initialization code in that section. The module author must still add
the `#[link_section = ".init.text"]` attribute to the Rust `init()` in
the `impl kernel::Module` block in order to then call `__init`
functions. However, this patch enables module authors do so, when
previously it would not be possible (without warnings).
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240206153806.567055-1-tahbertschinger@gmail.com
[ Reworded title to add prefix. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Some of our links use relative paths in order to point to files in the
source tree, e.g.:
//! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h)
/// [`struct mutex`]: ../../../../include/linux/mutex.h
These are problematic because they are hard to maintain and do not support
`O=` builds.
Instead, provide support for `srctree`-relative links, e.g.:
//! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
/// [`struct mutex`]: srctree/include/linux/mutex.h
The links are fixed after `rustdoc` generation to be based on the absolute
path to the source tree.
Essentially, this is the automatic version of Tomonori's fix [1],
suggested by Gary [2].
Suggested-by: Gary Guo <gary@garyguo.net>
Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Closes: https://lore.kernel.org/r/20231026.204058.2167744626131849993.fujita.tomonori@gmail.com [1]
Fixes: 48fadf4400 ("docs: Move rustdoc output, cross-reference it")
Link: https://lore.kernel.org/rust-for-linux/20231026154525.6d14b495@eugeo/ [2]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20231215235428.243211-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Traits marked with `#[vtable]` need to provide default implementations
for optional functions. The C side represents these with `NULL` in the
vtable, so the default functions are never actually called. We do not
want to replicate the default behavior from C in Rust, because that is
not maintainable. Therefore we should use `build_error` in those default
implementations. The error message for that is provided at
`kernel::error::VTABLE_DEFAULT_ERROR`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20231026201855.1497680-1-benno.lossin@proton.me
[ Wrapped paragraph to 80 as requested and capitalized sentence. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Enable combining identifiers with literals in the 'paste!' macro. This
allows combining user-specified strings with affixes to create
namespaced identifiers.
This sample code:
macro_rules! m {
($name:lit) => {
paste!(struct [<_some_ $name _struct_>] {})
}
}
m!("foo_bar");
Would previously cause a compilation error. It will now generate:
struct _some_foo_bar_struct_ {}
Signed-off-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20231118013959.37384-1-tmgross@umich.edu
[ Added `:` before example block. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to support
LLVM 16 as well as proper support for '__noreturn' C functions, which
are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a few
new checks to cover for even more cases, plus adds some more help
texts. All this together will hopefully make problematic setups
easier to identify and to be solved by users building the kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it allows
the resulting identifier to be used to declare new items and it
allows to transform the identifiers before concatenating them, e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes in
this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of fields,
allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait, which
allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied later
in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for performance,
using 'krealloc_aligned()' too, which forwards the call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a 'PhantomPinned'
field to Rust structs that contain C structs which must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library using
the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are joining
as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups.
-----BEGIN PGP SIGNATURE-----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=BAP+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
Add a derive proc-macro for the `Zeroable` trait. The macro supports
structs where every field implements the `Zeroable` trait. This way
`unsafe` implementations can be avoided.
The macro is split into two parts:
- a proc-macro to parse generics into impl and ty generics,
- a declarative macro that expands to the impl block.
Suggested-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230814084602.25699-4-benno.lossin@proton.me
[ Added `ignore` to the `lib.rs` example and cleaned trivial nit. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With commit c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro provides a flexible way to concatenated identifiers together
and it allows the resulting identifier to be used to declare new items,
which `concat_idents!` does not allow. It also allows identifiers to be
transformed before concatenated.
The `concat_idents!` example
let x_1 = 42;
let x_2 = concat_idents!(x, _1);
assert!(x_1 == x_2);
can be written with `paste!` macro like this:
let x_1 = 42;
let x_2 = paste!([<x _1>]);
assert!(x_1 == x_2);
However `paste!` macro is more flexible because it can be used to create
a new variable:
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
While this is not possible with `concat_idents!`.
This macro is similar to the `paste!` crate [1], but this is a fresh
implementation to avoid vendoring large amount of code directly. Also, I
have augmented it to provide a way to specify span of the resulting
token, allowing precise control.
For example, this code is broken because the variable is declared inside
the macro, so Rust macro hygiene rules prevents access from the outside:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of the macro.
paste!(let [<$id>] = 1;)
}
}
m!(a);
let _ = a;
In this version of `paste!` macro I added a `span` modifier to allow
this:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of `$id`.
paste!(let [<$id:span>] = 1;)
}
}
m!(a);
let _ = a;
Link: http://docs.rs/paste/ [1]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230628171108.1150742-1-gary@garyguo.net
[ Added SPDX license identifier as discussed in the list and fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
If we define the same function name twice in a trait (using `#[cfg]`),
the `vtable` macro will redefine its `gen_const_name`, e.g. this will
define `HAS_BAR` twice:
#[vtable]
pub trait Foo {
#[cfg(CONFIG_X)]
fn bar();
#[cfg(not(CONFIG_X))]
fn bar(x: usize);
}
Fixes: b44becc5ee ("rust: macros: add `#[vtable]` proc macro")
Signed-off-by: Qingsong Chen <changxian.cqs@antgroup.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
Link: https://lore.kernel.org/r/20230808025404.2053471-1-changxian.cqs@antgroup.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When using `#[pin_data]` on a struct that used `Self` in the field
types, a type error would be emitted when trying to use `pin_init!`.
Since an internal type would be referenced by `Self` instead of the
defined struct.
This patch fixes this issue by replacing all occurrences of `Self` in
the `#[pin_data]` macro with the concrete type circumventing the issue.
Since rust allows type definitions inside of blocks, which are
expressions, the macro also checks for these and emits a compile error
when it finds `trait`, `enum`, `union`, `struct` or `impl`. These
keywords allow creating new `Self` contexts, which conflicts with the
current implementation of replacing every `Self` ident. If these were
allowed, some `Self` idents would be replaced incorrectly.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230424081112.99890-3-benno.lossin@proton.me
[ Added newline in commit message ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Other macros might also want to parse generics. Additionally this makes
the code easier to read, as the next commit will introduce more code in
`#[pin_data]`. Also add more comments to explain how parsing generics
work.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230424081112.99890-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When using `quote!` as part of an expression that was not the last one
in a function, the `#[allow(clippy::vec_init_then_push)]` attribute
would be present on an expression, which is not allowed.
This patch refactors that part of the macro to use a statement instead.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230424081112.99890-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `PinnedDrop` trait that facilitates destruction of pinned types.
It has to be implemented via the `#[pinned_drop]` macro, since the
`drop` function should not be called by normal code, only by other
destructors. It also only works on structs that are annotated with
`#[pin_data(PinnedDrop)]`.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-10-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the following initializer macros:
- `#[pin_data]` to annotate structurally pinned fields of structs,
needed for `pin_init!` and `try_pin_init!` to select the correct
initializer of fields.
- `pin_init!` create a pin-initializer for a struct with the
`Infallible` error type.
- `try_pin_init!` create a pin-initializer for a struct with a custom
error type (`kernel::error::Error` is the default).
- `init!` create an in-place-initializer for a struct with the
`Infallible` error type.
- `try_init!` create an in-place-initializer for a struct with a custom
error type (`kernel::error::Error` is the default).
Also add their needed internal helper traits and structs.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-8-y86-dev@protonmail.com
[ Fixed three typos. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `quote!` macro for creating `TokenStream`s directly via the
given Rust tokens. It also supports repetitions using iterators.
It will be used by the pin-init API proc-macros to generate code.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-3-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is kernel code, so specifying "kernel" is redundant. Let's simplify
things and just call it to_errno().
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-1-03779bddc02b@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Modules can (and usually do) have multiple alias tags, in order to
specify multiple possible device matches for autoloading. Allow this by
changing the alias ModuleInfo field to an Option<Vec<String>>.
Note: For normal device IDs this is autogenerated by modpost (which is
not properly integrated with Rust support yet), so it is useful to be
able to manually add device match aliases for now, and should still be
useful in the future for corner cases that modpost does not handle.
This pulls in the expect_group() helper from the rfl/rust branch
(with credit to authors).
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: Finn Behrens <me@kloenk.dev>
Signed-off-by: Finn Behrens <me@kloenk.dev>
Co-developed-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-macros-v2-1-7396e8b7018d@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Instead of taking binary string literals, take string ones instead,
making it easier for users to define a module, i.e. instead of
calling `module!` like:
module! {
...
name: b"rust_minimal",
...
}
now it is called as:
module! {
...
name: "rust_minimal",
...
}
Module names, aliases and license strings are restricted to
ASCII only. However, the author and the description allows UTF-8.
For simplicity (avoid parsing), escape sequences and raw string
literals are not yet handled.
Link: https://github.com/Rust-for-Linux/linux/issues/252
Link: https://lore.kernel.org/lkml/YukvvPOOu8uZl7+n@yadro.com/
Signed-off-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This procedural macro attribute provides a simple way to declare
a trait with a set of operations that later users can partially
implement, providing compile-time `HAS_*` boolean associated
constants that indicate whether a particular operation was overridden.
This is useful as the Rust counterpart to structs like
`file_operations` where some pointers may be `NULL`, indicating
an operation is not provided.
For instance:
#[vtable]
trait Operations {
fn read(...) -> Result<usize> {
Err(EINVAL)
}
fn write(...) -> Result<usize> {
Err(EINVAL)
}
}
#[vtable]
impl Operations for S {
fn read(...) -> Result<usize> {
...
}
}
assert_eq!(<S as Operations>::HAS_READ, true);
assert_eq!(<S as Operations>::HAS_WRITE, false);
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro provides similar functionality to the unstable feature
`concat_idents` without having to rely on it.
For instance:
let x_1 = 42;
let x_2 = concat_idents!(x, _1);
assert!(x_1 == x_2);
It has different behavior with respect to macro hygiene. Unlike
the unstable `concat_idents!` macro, it allows, for example,
referring to local variables by taking the span of the second
macro as span for the output identifier.
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This crate contains all the procedural macros ("proc macros")
shared by all the kernel.
Procedural macros allow to create syntax extensions. They run at
compile-time and can consume as well as produce Rust syntax.
For instance, the `module!` macro that is used by Rust modules
is implemented here. It allows to easily declare the equivalent
information to the `MODULE_*` macros in C modules, e.g.:
module! {
type: RustMinimal,
name: b"rust_minimal",
author: b"Rust for Linux Contributors",
description: b"Rust minimal sample",
license: b"GPL",
}
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Matthew Bakhtiari <dev@mtbk.me>
Signed-off-by: Matthew Bakhtiari <dev@mtbk.me>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
