Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Fixes: 1881fba89b ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're checking if the send root is read-only without being under the
protection of the root's root_item_lock spinlock, which is what protects
the root's flags when clearing the read-only flag, done at
btrfs_ioctl_subvol_setflags(). Furthermore, it should be done in the
same critical section that increments the root's send_in_progress counter,
as btrfs_ioctl_subvol_setflags() clears the read-only flag in the same
critical section that checks the counter's value.
So fix this by moving the read-only check under the critical section
delimited by the root's root_item_lock which also increments the root's
send_in_progress counter.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're checking if the send root is dead without the protection of the
root's root_item_lock spinlock, which is what protects the root's flags.
The inverse, setting the dead flag on a root, is done under the protection
of that lock, at btrfs_delete_subvolume(). Also checking and updating the
root's send_in_progress counter is supposed to be done in the same
critical section as checking for or setting the root dead flag, so that
these operations are done atomically as a single step (which is correctly
done by btrfs_delete_subvolume()).
So fix this by checking if the send root is dead in the same critical
section that updates the send_in_progress counter, which is protected by
the root's root_item_lock spinlock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains about possibly dereferencing a NULL fs_info at
btrfs_folio_end_lock_bitmap():
fs/btrfs/subpage.c:332 btrfs_folio_end_lock_bitmap() warn: variable dereferenced before check 'fs_info' (see line 326)
because we access fs_info to set the 'start_bit' variable before doing the
check for a NULL fs_info.
However fs_info is never NULL, since in the only caller of
btrfs_folio_end_lock_bitmap() is extent_writepage(), where we have an
inode which always as a non-NULL fs_info.
So remove the check for a NULL fs_info at btrfs_folio_end_lock_bitmap().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains about calling PTR_ERR() against a NULL pointer:
fs/btrfs/super.c:2272 btrfs_control_ioctl() warn: passing zero to 'PTR_ERR'
Fix this by calling PTR_ERR() against the device pointer only if it
contains an error.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_OP_ZONE_APPNED -> REQ_OP_ZONE_APPEND.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the control flow of btrfs_encoded_read() so that it doesn't call
free_extent_map() when we know that this has already been done.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Suggested-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in having a 'snapshot_force_cow' variable to track if we
need to decrement the root->snapshot_force_cow counter, as we never jump
to the 'out' label after incrementing the counter. Simplify this by
removing the variable and always decrementing the counter before the 'out'
label, right after the call to btrfs_mksubvol().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment refers to a list in the respective delayed ref head that no
longer exists (ref_list), it was replaced with a rbtree (ref_tree) in
commit 0e0adbcfdc ("btrfs: track refs in a rb_tree instead of a list").
So update the stale comment to refer to the rbtree instead of the old
list.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new unprivileged ioctl that will let the command
'btrfs subvolume sync' work without the (privileged) SEARCH_TREE ioctl.
There are several modes of operation, where the most common ones are to
wait on a specific subvolume or all currently queued for cleaning. This
is utilized e.g. in backup applications that delete subvolumes and wait
until they're cleaned to check for remaining space.
The other modes are for flexibility, e.g. for monitoring or
checkpoints in the queue of deleted subvolumes, again without the need
to use SEARCH_TREE.
Notes:
- waiting is interruptible, the timeout is set to 1 second and is not
configurable
- repeated calls to the ioctl see a different state, so this is
inherently racy when using e.g. the count or peek next/last
Use cases:
- a subvolume A was deleted, wait for cleaning (WAIT_FOR_ONE)
- a bunch of subvolumes were deleted, wait for all (WAIT_FOR_QUEUED or
PEEK_LAST + WAIT_FOR_ONE)
- count how many are queued (not blocking), for monitoring purposes
- report progress (PEEK_NEXT), may miss some if cleaning is quick
- own waiting in user space (PEEK_LAST until it's 0)
Signed-off-by: David Sterba <dsterba@suse.com>
Simplify tracking of the range processed by using cur_alloc_size only to
store the reserved part that may fail to the allocated extent. Remove
the ram_size as well since it is always equal to cur_alloc_size in the
context. Advance the start in normal path until extent allocation
succeeds and keep the start unchanged in the error handling path.
Passed the fstest generic/475 test for a hundred times with quota
enabled. And a modified generic/475 test by removing the sleep time
for a hundred times. About one tenth of the tests do enter the error
handling path due to fail to reserve extent.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove conditional path allocation from btrfs_read_locked_inode(). Add
an ASSERT(path) to indicate it should never be called with a NULL path.
Call btrfs_read_locked_inode() directly from btrfs_iget(). This causes
code duplication between btrfs_iget() and btrfs_iget_path(), but I
think this is justifiable as it removes the need for conditionally
allocating the path inside of btrfs_read_locked_inode(). This makes the
code easier to reason about and makes it clear who has the
responsibility of allocating and freeing the path.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move btrfs_add_inode_to_root() so it can be called from
btrfs_read_locked_inode(), no changes were made to the function.
Move cleanup code from btrfs_iget_path() to btrfs_read_locked_inode.
This improves readability and improves a leaky abstraction. Previously
btrfs_iget_path() had to handle a positive error case as a result of a
call to btrfs_search_slot(), but it makes more sense to handle this
closer to the source of the call.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add struct io_btrfs_cmd as a wrapper type for io_uring_cmd_to_pdu(),
rather than using a raw pointer.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an io_uring command for encoded reads, using the same interface as
the existing BTRFS_IOC_ENCODED_READ ioctl.
btrfs_uring_encoded_read() is an io_uring version of
btrfs_ioctl_encoded_read(), which validates the user input and calls
btrfs_encoded_read() to read the appropriate metadata. If we determine
that we need to read an extent from disk, we call
btrfs_encoded_read_regular_fill_pages() through
btrfs_uring_read_extent() to prepare the bio.
The existing btrfs_encoded_read_regular_fill_pages() is changed so that
if it is passed a valid uring_ctx, rather than waking up any waiting
threads it calls btrfs_uring_read_extent_endio(). This in turn copies
the read data back to userspace, and calls io_uring_cmd_done() to
complete the io_uring command.
Because we're potentially doing a non-blocking read,
btrfs_uring_read_extent() doesn't clean up after itself if it returns
-EIOCBQUEUED. Instead, it allocates a priv struct, populates the fields
there that we will need to unlock the inode and free our allocations,
and defers this to the btrfs_uring_read_finished() that gets called when
the bio completes.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change btrfs_encoded_read_regular_fill_pages() so that the priv struct
is allocated rather than stored on the stack, in preparation for adding
an asynchronous mode to the function.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change btrfs_encoded_read() so that it returns -EAGAIN rather than sleeps
if IOCB_NOWAIT is set in iocb->ki_flags. The conditions that require
sleeping are: inode lock, writeback, extent lock, ordered range.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the behaviour of btrfs_encoded_read() so that if it needs to read
an extent from disk, it leaves the extent and inode locked and returns
-EIOCBQUEUED. The caller is then responsible for doing the I/O via
btrfs_encoded_read_regular() and unlocking the extent and inode.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
iocb->ki_pos isn't used after this function, so there's no point in
changing its value.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the previous patch, which converted the rb-tree used to track
delayed ref heads into an xarray, the find_ref_head() function is now
used only by one caller which always passes false to the 'return_bigger'
argument. So remove the 'return_bigger' logic, simplifying the function,
and move all the function code to the single caller.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use a red black tree (rb-tree) to track the delayed ref
heads (in struct btrfs_delayed_ref_root::href_root). This however is not
very efficient when the number of delayed ref heads is large (and it's
very common to be at least in the order of thousands) since rb-trees are
binary trees. For example for 10K delayed ref heads, the tree has a depth
of 13. Besides that, inserting into the tree requires navigating through
it and pulling useless cache lines in the process since the red black tree
nodes are embedded within the delayed ref head structure - on the other
hand, by being embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead which has a much higher
branching factor than a red black tree (binary balanced tree) and is more
cache friendly and behaves like a resizable array, with a much better
search and insertion complexity than a red black tree. This only has one
small disadvantage which is that insertion will sometimes require
allocating memory for the xarray - which may fail (not that often since
it uses a kmem_cache) - but on the other hand we can reduce the delayed
ref head structure size by 24 bytes (from 152 down to 128 bytes) after
removing the embedded red black tree node, meaning than we can now fit
32 delayed ref heads per 4K page instead of 26, and that gain compensates
for the occasional memory allocations needed for the xarray nodes. We
also end up using only 2 cache lines instead of 3 per delayed ref head.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 171845.7 12253839
16 2400000 0 230898.7 12308254
23 3600000 0 212292.9 12467768
30 4800000 0 195737.8 12627554
46 6000000 0 171055.2 12783329
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 173835.0 12246131
16 2400000 0 233537.8 12271746
23 3600000 0 220398.7 12307737
30 4800000 0 204483.6 12392318
40 6000000 0 182923.3 12771843
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add some comments to struct btrfs_delayed_ref_root's fields to mention
what its spinlock protects.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delayed refs lock must be held when calling add_delayed_ref_head(),
so assert that it's being held.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delayed refs lock must be held when calling find_first_ref_head(), so
assert that it's being held.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have 3 callers for find_ref_head() so assert at find_ref_head() that we
have the delayed refs lock held, removing the assertion from one of its
callers (btrfs_find_delayed_ref_head()).
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info at
btrfs_delete_ref_head(), so pass a fs_info argument to it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info in
the function find_ref_head(), so pass a fs_info argument to it as well as
to the functions btrfs_select_ref_head() and btrfs_find_delayed_ref_head()
which call find_ref_head().
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The unselect_delayed_ref_head() at extent-tree.c doesn't really belong in
that file as it's a delayed refs specific detail and therefore should be
at delayed-ref.c. Further its inverse, btrfs_select_ref_head(), is at
delayed-ref.c, so it only makes sense to have it there too.
So move unselect_delayed_ref_head() into delayed-ref.c and rename it to
btrfs_unselect_ref_head() so that its name closely matches its inverse
(btrfs_select_ref_head()).
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing it in two steps outside of delayed-ref.c, leaking low
level details such as locking, move the logic entirely to delayed-ref.c
under btrfs_select_ref_head(), reducing code and making things simpler
for the caller.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function only returns 0, meaning it was able to lock the delayed ref
head, or -EAGAIN in case it wasn't able to lock it. So simplify this and
use a boolean return type instead, returning true if it was able to lock
and false otherwise.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The atomic counter 'num_entries' is not used anymore, we increment it
and decrement it but then we don't ever read it to use for any logic.
Its last use was removed with commit 61a56a992f ("btrfs: delayed refs
pre-flushing should only run the heads we have"). So remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of open coding it, use the find_first_ref_head() helper at
btrfs_destroy_delayed_refs(). This avoids duplicating the logic,
specially with the upcoming changes in subsequent patches.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When destroying delayed refs during a transaction abort, we have open
coded the removal of a delayed ref, which is also done by the static
helper function drop_delayed_ref(). So remove that duplicated code and
use drop_delayed_ref() instead.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info parameter is redundant because it can be extracted from the
transaction given as another parameter. So remove it and use the fs_info
accessible from the transaction.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info parameter is redundant because it can be extracted from the
transaction given as another parameter. So remove it and use the fs_info
accessible from the transaction.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's better suited at delayed-ref.c since it's about delayed refs and
contains logic to iterate over them (using the red black tree, doing all
the locking, freeing, etc), so move it from disk-io.c, which is pretty
big, into delayed-ref.c, hiding implementation details of how delayed
refs are tracked and managed. This also facilitates the next patches in
the series.
This change moves the code between files but also does the following
simple cleanups:
1) Rename the 'cache' variable to 'bg', since it's a block group
(the 'cache' logic comes from old days where the block group
structure was named 'btrfs_block_group_cache');
2) Move the 'ref' variable declaration to the scope of the inner
while loop, since it's not used outside that loop.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_destroy_delayed_refs() it's unexpected to not find the block
group to which a delayed reference's extent belongs to, so we have this
BUG_ON(), not just because it's highly unexpected but also because we
don't know what to do there.
Since we are in the transaction abort path, there's nothing we can do
other than proceed and cleanup all used resources we can. So remove
the BUG_ON() and deal with a missing block group by logging an error
message and continuing to cleanup all we can related to the current
delayed ref head and moving to other delayed refs.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting extent backref, in order to check whether refs other than
inline refs are used, we always use path keep locks for tree search, which
will increase the lock contention of extent tree.
We do not need the parent node every time to determine whether normal
refs are used. It is only needed when the extent item is the last item
in a leaf.
Therefore, we change it to first use keep_locks=0 for search. If the
extent item happens to be the last item in the leaf, we then change to
keep_locks=1 for the second search to reduce lock contention.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement self-tests for partial deletion of RAID stripe-tree entries.
These two new tests cover both the deletion of the front of a RAID
stripe-tree stripe extent as well as truncation of an item to make it
smaller.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In our CI system, the RAID stripe tree configuration sometimes fails with
the following ASSERT():
assertion failed: found_start >= start && found_end <= end, in fs/btrfs/raid-stripe-tree.c:64
This ASSERT()ion triggers, because for the initial design of RAID
stripe-tree, I had the "one ordered-extent equals one bio" rule of zoned
btrfs in mind.
But for a RAID stripe-tree based system, that is not hosted on a zoned
storage device, but on a regular device this rule doesn't apply.
So in case the range we want to delete starts in the middle of the
previous item, grab the item and "truncate" it's length. That is, clone
the item, subtract the deleted portion from the key's offset, delete the
old item and insert the new one.
In case the range to delete ends in the middle of an item, we have to
adjust both the item's key as well as the stripe extents and then
re-insert the modified clone into the tree after deleting the old stripe
extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When fgp_flags and gfp_flags are zero, use filemap_get_folio(A, B)
instead of __filemap_get_folio(A, B, 0, 0)—no need for the extra
arguments 0, 0.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The buffered write path is still heavily utilizing the page interface.
Since we have converted it to do a page-by-page copying, it's much easier
to convert all involved functions to folio interface, this involves:
- btrfs_copy_from_user()
- btrfs_drop_folio()
- prepare_uptodate_page()
- prepare_one_page()
- lock_and_cleanup_extent_if_need()
- btrfs_dirty_page()
All function are changed to accept a folio parameter, and if the word
"page" is in the function name, change that to "folio" too.
The function btrfs_dirty_page() is exported for v1 space cache, convert
v1 cache call site to convert its page to folio for the new interface.
And there is a small enhancement for prepare_one_folio(), instead of
manually waiting for the page writeback, let __filemap_get_folio() to
handle that by using FGP_WRITEBEGIN, which implies
(FGP_LOCK | FGP_WRITE | FGP_CREAT | FGP_STABLE).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the btrfs_buffered_write() is preparing multiple page a time,
allowing a better performance.
But the current trend is to support larger folio as an optimization,
instead of implementing own multi-page optimization.
This is inspired by generic_perform_write(), which is copying one folio
a time.
Such change will prepare us to migrate to implement the write_begin()
and write_end() callbacks, and make every involved function a little
easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_do_encoded_write() was converted to use folios in 400b172b8c,
but we're still allocating based on sizeof(struct page *) rather than
sizeof(struct folio *). There's no functional change.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove hard-coded strings by using the str_yes_no() and str_no_yes()
helper functions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since there is no user of reader locks, rename the writer locks into a
more generic name, by removing the "_writer" part from the name.
And also rename btrfs_subpage::writer into btrfs_subpage::locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit d7172f52e9 ("btrfs: use per-buffer locking for
extent_buffer reading"), metadata read no longer relies on the subpage
reader locking.
This means we do not need to maintain a different metadata/data split
for locking, so we can convert the existing reader lock users by:
- add_ra_bio_pages()
Convert to btrfs_folio_set_writer_lock()
- end_folio_read()
Convert to btrfs_folio_end_writer_lock()
- begin_folio_read()
Convert to btrfs_folio_set_writer_lock()
- folio_range_has_eb()
Remove the subpage->readers checks, since it is always 0.
- Remove btrfs_subpage_start_reader() and btrfs_subpage_end_reader()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is not really suitable to lock a folio, as it lacks the
proper mapping checks, thus the locked folio may not even belong to
btrfs.
And due to the above reason, the last user inside lock_delalloc_folios()
is already removed, and we can remove this function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If you follow the seed/sprout wiki, it suggests the following workflow:
btrfstune -S 1 seed_dev
mount seed_dev mnt
btrfs device add sprout_dev
mount -o remount,rw mnt
The first mount mounts the FS readonly, which results in not setting
BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add
somewhat surprisingly clears the readonly bit on the sb (though the
mount is still practically readonly, from the users perspective...).
Finally, the remount checks the readonly bit on the sb against the flag
and sees no change, so it does not run the code intended to run on
ro->rw transitions, leaving BTRFS_FS_OPEN unset.
As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and
does no work. This results in leaking deleted snapshots until we run out
of space.
I propose fixing it at the first departure from what feels reasonable:
when we clear the readonly bit on the sb during device add.
A new fstest I have written reproduces the bug and confirms the fix.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
