14475 Commits

Author SHA1 Message Date
Jacek Lawrynowicz
e38501cee5 accel/ivpu: Stop using hardcoded DRIVER_DATE
Hardcoded driver date is useless, so use kernel version as a driver date
to make identifying .ko file easier. Also allow to pass DRIVER_DATE
on build time to allow versioning the driver in case it is built out
of the tree.

Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11 12:44:38 +02:00
Dave Airlie
26bb2dc102 Cross-subsystem Changes:
- Add drm_line_printer (Michal)
 
 Driver Changes:
 - Fix an UAF (Matt Auld)
 - Sanity check compression and coherency mode (Matt Auld)
 - Some PIC-ID work (Jani)
 - Use IS_ENABLED() instead of defined() on config options.
 - gt powergating work (Riana)
 - Suppress missing out ter rpm protection warning (Rodrigo)
 - Fix a vm leak  (Dafna)
 - Clean up and update 'has_flat_ccs' handling (Lucas)
 - Fix arg to pci_iomap (Lucas)
 - Mark reserved engines in shapshot (Lucas)
 - Don't keep stale pointer (Michal)
 - Fix build warning with CONFIG_PM=n (Arnd)
 - Add a xe_bo subtest for shrinking / swapping (Thomas)
 - Add a warkaround (Tejas)
 - Some display PM work (Maarten)
 - Enable Xe2 + PES disaggregation (Ashutosh)
 - Large xe_mmio rework / cleanup (Matt Roper)
 - A couple of fixes / cleanups in the xe client code (Matt Auld)
 - Fix page-fault handling on closed VMs  (Matt Brost)
 - Fix overflow in OA batch buffer (José)
 - Style fixes (Lucas, Jiapeng, Nitin)
 - Fixes and new development around SRIOV (Michal)
 - Use devm_add_action_or_reset() in gt code (He)
 - Fix CCS offset calculation (Matt Auld)
 - Remove i915_drv.h include (Rodrigo)
 - Restore PCI state on resume (Rodrigo)
 - Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
 - Convert USM lock to rwsem (Matt Brost)
 - Defer gt-mmio intialization (Matt Roper)
 - meemirq changes (Ilia)
 - Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
 - Use a helper for ASID->VM lookup (Matt Brost)
 - Add new PCI id for ARL (Dnyaneshwar)
 - Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
 - Performance tuning work for media GT and L3 cache flushing (Gustavo)
 - Clean up VM- and exec queue file lock usage (Matt Brost)
 - GuC locking fix (Matt Auld)
 - Fix UAF around queue destruction (Matt Auld)
 - Move IRQ-related registers to dedicated header (Matt Roper)
 - Resume TDR after GT reset (Matt Brost)
 - Move xa_alloc to prevent UAF (Matt Auld)
 - Fix OA stream close (José)
 - Remove unused i915_gpu_error.h (Jani)
 - Prevent null pointer access in xe_migrate_copy (Zhanjun)
 - Fix memory leak when aborting binds (Matt Brost)
 - Prevent UAF in send_recv() (Matt Auld)
 - Fix xa_store() error checking (Matt Auld)
 - drop irq disabling around xa_erase in guc code (Matt Auld)
 - Use fault injection infrastructure to find issues as probe time (Francois)
 - Fix a workaround implementation. (Vinay)
 - Mark wedged_mode debugfs writable (Matt Roper)
 - Fix for prviewous memirq work (Michal)
 - More SRIOV work (Michal)
 - Devcoredump work (John)
 - GuC logging + devcoredump support (John)
 - Don't report L3 bank availability on PTL (Shekhar)
 - Replicate Xe2 PAT settings on Xe2 (Matt Roper)
 - Define Xe3 feature flags (Haridhar)
 - Reuse Xe2 MOCS table on on PTL (Haridhar)
 - Add PTL platform definition (Haridhar)
 - Add MCR steering for Xe3 (Matt)
 - More work around GuC capture for devcoredump (Zhanjun)
 - Improve cache flushing behaviour on bmg (Matt Auld)
 - Fix shrinker test compiler warnings on 32-bit (Thomas)
 - Initial set of workarounds for Xe3 (Gustavo)
 - Extend workaround for xe2lpg (Aradhya)
 - Fix unbalanced rpm put x 2 (Matt Auld)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
 v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
 =FtY6
 -----END PGP SIGNATURE-----

Merge tag 'drm-xe-next-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

Cross-subsystem Changes:
- Add drm_line_printer (Michal)

Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak  (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs  (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)

Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
# v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
# 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
# =FtY6
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST
# gpg:                using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key

# Conflicts:
#	drivers/gpu/drm/xe/xe_gt_mcr.c
#	drivers/gpu/drm/xe/xe_tuning.c
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
2024-10-11 08:01:16 +10:00
Daniel Lezcano
445936f9e2 thermal: core: Add user thresholds support
The user thresholds mechanism is a way to have the userspace to tell
the thermal framework to send a notification when a temperature limit
is crossed. There is no id, no hysteresis, just the temperature and
the direction of the limit crossing. That means we can be notified
when a threshold is crossed the way up only, or the way down only or
both ways. That allows to create hysteresis values if it is needed.

A threshold can be added, deleted or flushed. The latter means all
thresholds belonging to a thermal zone will be deleted.

When a threshold is added:

 - if the same threshold (temperature and direction) exists, an error
   is returned

 - if a threshold is specified with the same temperature but a
   different direction, the specified direction is added

 - if there is no threshold with the same temperature then it is
   created

When a threshold is deleted:

 - if the same threshold (temperature and direction) exists, it is
   deleted

 - if a threshold is specified with the same temperature but a
   different direction, the specified direction is removed

 - if there is no threshold with the same temperature, then an error
   is returned

When the threshold are flushed:

 - All thresholds related to a thermal zone are deleted

When a threshold is crossed:

 - the userspace does not need to know which threshold(s) have been
   crossed, it will be notified with the current temperature and the
   previous temperature

 - if multiple thresholds have been crossed between two updates only
   one notification will be send to the userspace, it is pointless to
   send a notification per thresholds crossed as the userspace can
   handle that easily when it has the temperature delta information

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org
[ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-10 23:33:37 +02:00
Martin Kelly
c6ca31981b bpf: Update bpf_override_return() comment
The documentation says CONFIG_FUNCTION_ERROR_INJECTION is supported only
on x86. This was presumably true at the time of writing, but it's now
supported on many other architectures too. Drop this statement, since
it's not correct anymore and it fits better in other documentation
anyway.

Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Link: https://lore.kernel.org/r/20241010193301.995909-1-martin.kelly@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-10 13:39:45 -07:00
Dave Airlie
aa628ebb06 Merge tag 'drm-misc-next-2024-10-09' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:

UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.

Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.

Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.

Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
  panels.
-

Signed-off-by: Dave Airlie <airlied@redhat.com>

# Conflicts:
#	drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
2024-10-11 05:39:10 +10:00
Matteo Croce
5bd48a3a14 bpf: fix argument type in bpf_loop documentation
The `index` argument to bpf_loop() is threaded as an u64.
This lead in a subtle verifier denial where clang cloned the argument
in another register[1].

[1] https://github.com/systemd/systemd/pull/34650#issuecomment-2401092895

Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20241010035652.17830-1-technoboy85@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-10 08:52:36 -07:00
Paolo Abeni
14bba9285a netlink: spec: add shaper introspection support
Allow the user-space to fine-grain query the shaping features
supported by the NIC on each domain.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/3ddd10e450e3fe7d4b944c0d0b886d4483529ee6.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-10 08:30:22 -07:00
Paolo Abeni
04e65df94b netlink: spec: add shaper YAML spec
Define the user-space visible interface to query, configure and delete
network shapers via yaml definition.

Add dummy implementations for the relevant NL callbacks.

set() and delete() operations touch a single shaper creating/updating or
deleting it.
The group() operation creates a shaper's group, nesting multiple input
shapers under the specified output shaper.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/7a33a1ff370bdbcd0cd3f909575c912cd56f41da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-10 08:30:21 -07:00
Amadeusz Sławiński
9eb2142a2a
ASoC: topology: Bump minimal topology ABI version
When v4 topology support was removed, minimal topology ABI version
should have been bumped.

Fixes: fe4a07454256 ("ASoC: Drop soc-topology ABI v4 support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241009081230.304918-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-10 12:15:03 +01:00
Alexander Zubkov
80c549cd1a Fix misspelling of "accept*" in net
Several files have "accept*" misspelled as "accpet*" in the comments.
Fix all such occurrences.

Signed-off-by: Alexander Zubkov <green@qrator.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008162756.22618-2-green@qrator.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-09 19:55:40 -07:00
David Woodhouse
2050327242 ptp: Add support for the AMZNC10C 'vmclock' device
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.

When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.

In its simplest form, the device merely advertises a 'disruption_marker'
which indicates that the guest should throw away any NTP synchronization
it thinks it has, and start again.

Because the shared memory region can be exposed all the way to userspace
through the /dev/vmclock0 node, applications can still use time from a
fast vDSO 'system call', and check the disruption marker to be sure that
their timestamp is indeed truthful.

The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch. The PTP driver consumes this information if present.
Like the KVM PTP clock, this PTP driver can convert TSC-based cross
timestamps into KVM clock values. Unlike the KVM PTP clock, it does so
only when such is actually helpful.

The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, this driver supports the simple ACPI form of the device which
is being shipped in certain commercial hypervisors (and submitted for
inclusion in QEMU).

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-10-09 12:16:18 +01:00
Dave Airlie
54bc1d3255 Merge tag 'drm-misc-next-2024-09-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:

UAPI Changes:
- panthor: Add realtime group priority and priority query.

Cross-subsystem Changes:
- Add Vivek Kasireddy as udmabuf maintainer.
- Assorted udmabuf changes.
- Device tree binding updates.
- dmabuf documentation fixes.
- Move drm_rect to drm core module from kms helper.

Core Changes:
- Update scheduler documentation and concurrency fixes.
- drm/ci updates.
- Add memory-agnostic fbdev client and client-agnostic setup helper.
- Huge driver conversion for using the above.

Driver Changes:
- Assorted fixes to imx, panel/nt35510, sti, accel/ivpu, v3d, vkms,
  host1x.
- Add panel quirks for AYA NEO panels.
- Make module autoloading work for bridge/it6505 and mcde.
- Add huge page support to v3d using a custom shmfs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a9b95e6f-9f35-464e-83f6-bda75b35ee0b@linux.intel.com
2024-10-09 11:58:39 +10:00
Dave Airlie
7fefa1edc2 Merge tag 'drm-misc-next-2024-09-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:

UAPI Changes:
- Add panthor/DEV_QUERY_TIMESTAMP_INFO query.

Cross-subsystem Changes:
- Updated dt bindings.
- Add documentation explaining default errnos for fences.
- Mark dma-buf heaps creation functions as __init.

Core Changes:
- Split DSC helpers from DP helpers.
- Clang build fixes for drm/mm test.
- Remove simple pipeline support for gem-vram,
  no longer any users left after converting bochs.
- Add erno to drm_sched_start to distinguish between GPU and queue
  reset.
- Add drm_framebuffer testcases.
- Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n.
- Use read_trylock instead of read_lock in dma_fence_begin_signalling to
  quiesce lockdep.

Driver Changes:
- Assorted small fixes and updates for tegra, host1x, imagination,
  nouveau, panfrost, panthor, panel/ili9341, mali, exynos,
  panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a,
  bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050,
  panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d.
- Add bridge/TI TDP158.
- Assorted documentation updates.
- Convert bochs from simple drm to gem shmem, and check modes
  against available memory.
- Many VC4 fixes, most related to scaling and YUV support.
- Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS.
- Rockchip 4k@60 support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
2024-10-09 09:03:46 +10:00
Dmitry Perchanov
a8f2cdd27d media: v4l: Add luma 16-bit interlaced pixel format
The formats added by this patch are:

        V4L2_PIX_FMT_Y16I

Interlaced lumina format primary use in RealSense Depth cameras with
stereo stream for left and right image sensors.

Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/568efbd75290e286b8ad9e7347b5f43745121020.camel@intel.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-10-08 16:04:44 +02:00
Shekhar Chauhan
9ab440a9d0 drm/xe/ptl: L3bank mask is not available on the media GT
On PTL platforms with media version 30.00, the fuse registers for
reporting L3 bank availability to the GT just read out as ~0 and do not
provide proper values.  Xe does not use the L3 bank mask for anything
internally; it only passes the mask through to userspace via the GT
topology query.

Since we don't have any way to get the real L3 bank mask, we don't want
to pass garbage to userspace.  Passing a zeroed mask or a copy of the
primary GT's L3 bank mask would also be inaccurate and likely to cause
confusion for userspace.  The best approach is to simply not include L3
in the list of masks returned by the topology query in cases where we
aren't able to provide a meaningful value.  This won't change the
behavior for any existing platforms (where we can always obtain L3 masks
successfully for all GTs), it will only prevent us from mis-reporting
bad information on upcoming platform(s).

There's a good chance this will become a formal workaround in the
future, but for now we don't have a lineage number so "no_media_l3" is
used in place of a lineage as the OOB workaround descriptor.

v2:
 - Re-calculate query size to properly match data returned. (Gustavo)
 - Update kerneldoc to clarify that the L3bank mask may not be included
   in the query results if the hardware doesn't make it available.
   (Gustavo)

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007154143.2021124-2-matthew.d.roper@intel.com
2024-10-08 06:56:51 -07:00
Pierre-Eric Pelloux-Prayer
56c594d8df drm: add DRM_SET_CLIENT_NAME ioctl
Giving the opportunity to userspace to associate a free-form
name with a drm_file struct is helpful for tracking and debugging.

This is similar to the existing DMA_BUF_SET_NAME ioctl.

Access to client_name is protected by a mutex, and the 'clients' debugfs
file has been updated to print it.

Userspace MR to use this ioctl:
   https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1428

If the string passed by userspace contains chars that would mess up output
when it's going to be printed (in dmesg, fdinfo, etc), -EINVAL is returned.

A 0-length string is a valid use, and clears the existing name.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-2-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
2024-10-08 10:00:30 +02:00
Daniel Borkmann
83134ef460 netkit: Add option for scrubbing skb meta data
Jordan reported that when running Cilium with netkit in per-endpoint-routes
mode, network policy misclassifies traffic. In this direct routing mode
of Cilium which is used in case of GKE/EKS/AKS, the Pod's BPF program to
enforce policy sits on the netkit primary device's egress side.

The issue here is that in case of netkit's netkit_prep_forward(), it will
clear meta data such as skb->mark and skb->priority before executing the
BPF program. Thus, identity data stored in there from earlier BPF programs
(e.g. from tcx ingress on the physical device) gets cleared instead of
being made available for the primary's program to process. While for traffic
egressing the Pod via the peer device this might be desired, this is
different for the primary one where compared to tcx egress on the host
veth this information would be available.

To address this, add a new parameter for the device orchestration to
allow control of skb->mark and skb->priority scrubbing, to make the two
accessible from BPF (and eventually leave it up to the program to scrub).
By default, the current behavior is retained. For netkit peer this also
enables the use case where applications could cooperate/signal intent to
the BPF program.

Note that struct netkit has a 4 byte hole between policy and bundle which
is used here, in other words, struct netkit's first cacheline content used
in fast-path does not get moved around.

Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Reported-by: Jordan Rife <jrife@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://github.com/cilium/cilium/issues/34042
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20241004101335.117711-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-10-07 17:12:37 -07:00
Philip Yang
a3ab2d45b9 drm/amdkfd: SMI report dropped event count
Add new SMI event to report the dropped event count.

When the event kfifo is full, drop count is not zero, or no enough space
left to store the event message, increase drop count.

After reading event out from kfifo, if event was dropped, drop_count is
not zero, generate a dropped event record and reset drop count to zero.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07 14:32:23 -04:00
Philip Yang
dad6c45cbd drm/amdkfd: Output migrate end event if migrate failed
If page migration failed, also output migrate end event to match with
migrate start event, with failure error_code added to the end of the
migrate message macro. This will not break uAPI because application uses
old message macro sscanf drop and ignore the error_code.

Output GPU page fault restore end event if migration failed.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07 14:09:02 -04:00
Erick Archer
4436df4788 batman-adv: Add flex array to struct batadv_tvlv_tt_data
The "struct batadv_tvlv_tt_data" uses a dynamically sized set of
trailing elements. Specifically, it uses an array of structures of type
"batadv_tvlv_tt_vlan_data". So, use the preferred way in the kernel
declaring a flexible array [1].

At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions). In this case, it is important to note
that the attribute used is specifically __counted_by_be since variable
"num_vlan" is of type __be16.

The following change to the "batadv_tt_tvlv_ogm_handler_v1" function:

-	tt_vlan = (struct batadv_tvlv_tt_vlan_data *)(tt_data + 1);
-	tt_change = (struct batadv_tvlv_tt_change *)(tt_vlan + num_vlan);

+	tt_change = (struct batadv_tvlv_tt_change *)((void *)tt_data
+						     + flex_size);

is intended to prevent the compiler from generating an "out-of-bounds"
notification due to the __counted_by attribute. The compiler can do a
pointer calculation using the vlan_data flexible array memory, or in
other words, this may be calculated as an array offset, since it is the
same as:

        &tt_data->vlan_data[num_vlan]

Therefore, we go past the end of the array. In other "multiple trailing
flexible array" situations, this has been solved by addressing from the
base pointer, since the compiler either knows the full allocation size
or it knows nothing about it (this case, since it came from a "void *"
function argument).

The order in which the structure batadv_tvlv_tt_data and the structure
batadv_tvlv_tt_vlan_data are defined must be swap to avoid an incomplete
type error.

Also, avoid the open-coded arithmetic in memory allocator functions [2]
using the "struct_size" macro and use the "flex_array_size" helper to
clarify some calculations, when possible.

Moreover, the new structure member also allow us to avoid the open-coded
arithmetic on pointers in some situations. Take advantage of this.

This code was detected with the help of Coccinelle, and audited and
modified manually.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2024-10-05 18:23:38 +02:00
Lukas Wunner
5b553e06b3 crypto: virtio - Drop sign/verify operations
The virtio crypto driver exposes akcipher sign/verify operations in a
user space ABI.  This blocks removal of sign/verify from akcipher_alg.

Herbert opines:

   "I would say that this is something that we can break.  Breaking it
    is no different to running virtio on a host that does not support
    these algorithms.  After all, a software implementation must always
    be present.

    I deliberately left akcipher out of crypto_user because the API
    is still in flux.  We should not let virtio constrain ourselves."
    https://lore.kernel.org/all/ZtqoNAgcnXnrYhZZ@gondor.apana.org.au/

   "I would remove virtio akcipher support in its entirety.  This API
    was never meant to be exposed outside of the kernel."
    https://lore.kernel.org/all/Ztqql_gqgZiMW8zz@gondor.apana.org.au/

Drop sign/verify support from virtio crypto.  There's no strong reason
to also remove encrypt/decrypt support, so keep it.

A key selling point of virtio crypto is to allow guest access to crypto
accelerators on the host.  So far the only akcipher algorithm supported
by virtio crypto is RSA.  Dropping sign/verify merely means that the
PKCS#1 padding is now always generated or verified inside the guest,
but the actual signature generation/verification (which is an RSA
decrypt/encrypt operation) may still use an accelerator on the host.

Generating or verifying the PKCS#1 padding is cheap, so a hardware
accelerator won't be of much help there.  Which begs the question
whether virtio crypto support for sign/verify makes sense at all.

It would make sense for the sign operation if the host has a security
chip to store asymmetric private keys.  But the kernel doesn't even
have an asymmetric_key_subtype yet for hardware-based private keys.
There's at least one rudimentary driver for such chips (atmel-ecc.c for
ATECC508A), but it doesn't implement the sign operation.  The kernel
would first have to grow support for a hardware asymmetric_key_subtype
and at least one driver implementing the sign operation before exposure
to guests via virtio makes sense.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-10-05 13:22:04 +08:00
Lukas Wunner
65c4c93caa crypto: sig - Introduce sig_alg backend
Commit 6cb8815f41a9 ("crypto: sig - Add interface for sign/verify")
began a transition of asymmetric sign/verify operations from
crypto_akcipher to a new crypto_sig frontend.

Internally, the crypto_sig frontend still uses akcipher_alg as backend,
however:

   "The link between sig and akcipher is meant to be temporary.  The
    plan is to create a new low-level API for sig and then migrate
    the signature code over to that from akcipher."
    https://lore.kernel.org/r/ZrG6w9wsb-iiLZIF@gondor.apana.org.au/

   "having a separate alg for sig is definitely where we want to
    be since there is very little that the two types actually share."
    https://lore.kernel.org/r/ZrHlpz4qnre0zWJO@gondor.apana.org.au/

Take the next step of that migration and augment the crypto_sig frontend
with a sig_alg backend to which all algorithms can be moved.

During the migration, there will briefly be signature algorithms that
are still based on crypto_akcipher, whilst others are already based on
crypto_sig.  Allow for that by building a fork into crypto_sig_*() API
calls (i.e. crypto_sig_maxsize() and friends) such that one of the two
backends is selected based on the transform's cra_type.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-10-05 13:22:04 +08:00
Jeffrey Ji
f26080d470 net_sched: sch_fq: add the ability to offload pacing
Some network devices have the ability to offload EDT (Earliest
Departure Time) which is the model used for TCP pacing and FQ packet
scheduler.

Some of them implement the timing wheel mechanism described in
https://saeed.github.io/files/carousel-sigcomm17.pdf
with an associated 'timing wheel horizon'.

This patchs adds to FQ packet scheduler TCA_FQ_OFFLOAD_HORIZON
attribute.

Its value is capped by the device max_pacing_offload_horizon,
added in the prior patch.

It allows FQ to let packets within pacing offload horizon
to be delivered to the device, which will handle the needed
delay without host involvement.

Signed-off-by: Jeffrey Ji <jeffreyji@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241003121219.2396589-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04 15:37:54 -07:00
Eric Dumazet
f858cc9eed net: add IFLA_MAX_PACING_OFFLOAD_HORIZON device attribute
Some network devices have the ability to offload EDT (Earliest
Departure Time) which is the model used for TCP pacing and FQ
packet scheduler.

Some of them implement the timing wheel mechanism described in
https://saeed.github.io/files/carousel-sigcomm17.pdf
with an associated 'timing wheel horizon'.

This patch adds dev->max_pacing_offload_horizon expressing
this timing wheel horizon in nsec units.

This is a read-only attribute.

Unless a driver sets it, dev->max_pacing_offload_horizon
is zero.

v2: addressed Jakub feedback ( https://lore.kernel.org/netdev/20240930152304.472767-2-edumazet@google.com/T/#mf6294d714c41cc459962154cc2580ce3c9693663 )
v3: added yaml doc (also per Jakub feedback)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241003121219.2396589-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04 15:37:53 -07:00
Vadim Fedorenko
4aecca4c76 net_tstamp: add SCM_TS_OPT_ID to provide OPT_ID in control message
SOF_TIMESTAMPING_OPT_ID socket option flag gives a way to correlate TX
timestamps and packets sent via socket. Unfortunately, there is no way
to reliably predict socket timestamp ID value in case of error returned
by sendmsg. For UDP sockets it's impossible because of lockless
nature of UDP transmit, several threads may send packets in parallel. In
case of RAW sockets MSG_MORE option makes things complicated. More
details are in the conversation [1].
This patch adds new control message type to give user-space
software an opportunity to control the mapping between packets and
values by providing ID with each sendmsg for UDP sockets.
The documentation is also added in this patch.

[1] https://lore.kernel.org/netdev/CALCETrU0jB+kg0mhV6A8mrHfTE1D1pr1SD_B9Eaa9aDPfgHdtA@mail.gmail.com/

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20241001125716.2832769-2-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04 11:52:19 -07:00
Mark Brown
7ec3b57cb2 arm64/ptrace: Expose GCS via ptrace and core files
Provide a new register type NT_ARM_GCS reporting the current GCS mode
and pointer for EL0.  Due to the interactions with allocation and
deallocation of Guarded Control Stacks we do not permit any changes to
the GCS mode via ptrace, only GCSPR_EL0 may be changed.

Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-04 12:04:41 +01:00
Mark Brown
3630e82ab6 mman: Add map_shadow_stack() flags
In preparation for adding arm64 GCS support make the map_shadow_stack()
SHADOW_STACK_SET_TOKEN flag generic and add _SET_MARKER. The existing
flag indicates that a token usable for stack switch should be added to
the top of the newly mapped GCS region while the new flag indicates that
a top of stack marker suitable for use by unwinders should be added
above that.

For arm64 the top of stack marker is all bits 0.

Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-5-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-04 12:04:33 +01:00
Mark Brown
91e102e797 prctl: arch-agnostic prctl for shadow stack
Three architectures (x86, aarch64, riscv) have announced support for
shadow stacks with fairly similar functionality.  While x86 is using
arch_prctl() to control the functionality neither arm64 nor riscv uses
that interface so this patch adds arch-agnostic prctl() support to
get and set status of shadow stacks and lock the current configuation to
prevent further changes, with support for turning on and off individual
subfeatures so applications can limit their exposure to features that
they do not need.  The features are:

  - PR_SHADOW_STACK_ENABLE: Tracking and enforcement of shadow stacks,
    including allocation of a shadow stack if one is not already
    allocated.
  - PR_SHADOW_STACK_WRITE: Writes to specific addresses in the shadow
    stack.
  - PR_SHADOW_STACK_PUSH: Push additional values onto the shadow stack.

These features are expected to be inherited by new threads and cleared
on exec(), unknown features should be rejected for enable but accepted
for locking (in order to allow for future proofing).

This is based on a patch originally written by Deepak Gupta but modified
fairly heavily, support for indirect landing pads is removed, additional
modes added and the locking interface reworked.  The set status prctl()
is also reworked to just set flags, if setting/reading the shadow stack
pointer is required this could be a separate prctl.

Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-4-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-04 12:04:33 +01:00
Eduard Zingerman
4f647a780f bpf: __bpf_fastcall for bpf_get_smp_processor_id in uapi
Since [1] kernel supports __bpf_fastcall attribute for helper function
bpf_get_smp_processor_id(). Update uapi definition for this helper in
order to have this attribute in the generated bpf_helper_defs.h

[1] commit 91b7fbf3936f ("bpf, x86, riscv, arm: no_caller_saved_registers for bpf_get_smp_processor_id()")

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-03 17:47:53 -07:00
Antonino Maniscalco
7788d320ba drm/msm/a6xx: Add a flag to allow preemption to submitqueue_create
Some userspace changes are necessary so add a flag for userspace to
advertise support for preemption when creating the submitqueue.

When this flag is not set preemption will not be allowed in the middle
of the submitted IBs therefore mantaining compatibility with older
userspace.

The flag is rejected if preemption is not supported on the target, this
allows userspace to know whether preemption is supported.

Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618028/
Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-10-03 13:21:52 -07:00
Linus Torvalds
8c245fe7dd Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
 
   - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
 
   - eth: am65-cpsw: fix forever loop in cleanup code
 
 Current release - new code bugs:
 
   - eth: mlx5: HWS, fixed double-free in error flow of creating SQ
 
 Previous releases - regressions:
 
   - core: avoid potential underflow in qdisc_pkt_len_init() with UFO
 
   - core: test for not too small csum_start in virtio_net_hdr_to_skb()
 
   - vrf: revert "vrf: remove unnecessary RCU-bh critical section"
 
   - bluetooth:
     - fix uaf in l2cap_connect
     - fix possible crash on mgmt_index_removed
 
   - dsa: improve shutdown sequence
 
   - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
 
   - eth: ip_gre: fix drops of small packets in ipgre_xmit
 
 Previous releases - always broken:
 
   - core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size
 
   - core: fix tcp fraglist segmentation after pull from frag_list
 
   - netfilter: nf_tables: prevent nf_skb_duplicated corruption
 
   - sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
 
   - mac802154: fix potential RCU dereference issue in mac802154_scan_worker
 
   - eth: fec: restart PPS after link state change
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmb+giESHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkDowP/25YsDA8uaH5yelI85vUgp1T50MWgFxJ
 ARm58Pzxr8byX6eIup95xSsjLvMbLaWj5LIA2Y49AV0fWVgGn0U8yx4mPy0Czhdg
 J1oxtyoV1pR2V/okWzD4yhZV2on7OGsS73I6J1s6BAowezr19A+aa5Un57dW/103
 ccwBuBOYlSIOIHmarOxuFhWMYcwXreNBHa9K7J6JtDFn9F56fUn+ZoIUJ7x27cSO
 eWhh9bIkeEb+xYeUXAjNP3pBvJ1xpwIyZv+JMTp40jNsAXPjSpI3Jwd1YlAAMuT9
 J2dW0Zs8uwm5LzBPFvI9iM0WHEmVy6+b32NjnKVwPn2+XGGWQss52bmRElNcJkrw
 4NeG6/6CPIE0xuczBECuMa0X68NDKIZsjy3Q3OahV82ef2cwhRk6FexyIg5oiMPx
 KmMi5B+UQw6ZY3ZF/ME/0jJx/H5ayOC01yNBaTUPrLJr8gjquWEMjZXEqJsdyixJ
 5OoZeKG5oN6HkN7g/IxoFjg/W/g93OULO3qH+IzLQG4NlVs6Zp4ykL7dT+Py2zzc
 Ru3n5+HA4PqDn2u7gmP1mu2g/lmKUIZEEvR+msP81Cywlz5qtWIH1a6oIeVC7bjt
 JNhgBgzKGGMGdgmhYNzXw213WCEbz0+as2SNlvlbiqMP5FKQPLzzBVuJoz4AtJVn
 cyVy7D66HuMW
 =cq2I
 -----END PGP SIGNATURE-----

Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from ieee802154, bluetooth and netfilter.

  Current release - regressions:

   - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc

   - eth: am65-cpsw: fix forever loop in cleanup code

  Current release - new code bugs:

   - eth: mlx5: HWS, fixed double-free in error flow of creating SQ

  Previous releases - regressions:

   - core: avoid potential underflow in qdisc_pkt_len_init() with UFO

   - core: test for not too small csum_start in virtio_net_hdr_to_skb()

   - vrf: revert "vrf: remove unnecessary RCU-bh critical section"

   - bluetooth:
       - fix uaf in l2cap_connect
       - fix possible crash on mgmt_index_removed

   - dsa: improve shutdown sequence

   - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq

   - eth: ip_gre: fix drops of small packets in ipgre_xmit

  Previous releases - always broken:

   - core: fix gso_features_check to check for both
     dev->gso_{ipv4_,}max_size

   - core: fix tcp fraglist segmentation after pull from frag_list

   - netfilter: nf_tables: prevent nf_skb_duplicated corruption

   - sctp: set sk_state back to CLOSED if autobind fails in
     sctp_listen_start

   - mac802154: fix potential RCU dereference issue in
     mac802154_scan_worker

   - eth: fec: restart PPS after link state change"

* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
  sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
  dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
  doc: net: napi: Update documentation for napi_schedule_irqoff
  net/ncsi: Disable the ncsi work before freeing the associated structure
  net: phy: qt2025: Fix warning: unused import DeviceId
  gso: fix udp gso fraglist segmentation after pull from frag_list
  bridge: mcast: Fail MDB get request on empty entry
  vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
  net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
  net: phy: realtek: Check the index value in led_hw_control_get
  ppp: do not assume bh is held in ppp_channel_bridge_input()
  selftests: rds: move include.sh to TEST_FILES
  net: test for not too small csum_start in virtio_net_hdr_to_skb()
  net: gso: fix tcp fraglist segmentation after pull from frag_list
  ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
  net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
  net: add more sanity checks to qdisc_pkt_len_init()
  net: avoid potential underflow in qdisc_pkt_len_init() with UFO
  net: ethernet: ti: cpsw_ale: Fix warning on some platforms
  net: microchip: Make FDMA config symbol invisible
  ...
2024-10-03 09:44:00 -07:00
Paolo Abeni
1127c73a8d netfilter pull request 24-10-02
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmb9qqsACgkQ1V2XiooU
 IOSplRAAsv0Rr2WRA+pDpQwcmMNWoemGtu0qB7L6IchM36P64GvldMhEgfSPCh1h
 6HdV8WlkGE5Q/bOPCNbkLg/INBelADoioaOlsdOO5oc+rGUw/Z4Swcq/1PF60Vaz
 tz8AOU0opAD3X50U5bqD1Z2xToonS9nz9Ql7OWAbTdn9red/2SY+H1fyDz00VIHU
 X4y2GWND5Hi6KIsAGTu9OiyQKy9hb1oA5xNU1OeNY+gNsr+r+NSbX0BOMSRJTvLv
 MyY0kzP+S+yTx2FGcDMqgKfo60Sb4Ru6rJXl3XKd6QxhW9Mt6adcmmlqa5edoWU3
 bJYkzugl66XKh1pDkC9u7om7zOOzBhjvLObDMbcYfAVJCctsErGcRDJIvS8M+ECB
 tRsxRFU2CSud4HzIeKfQUP7b16KghnBa4kTsc0r8MLcfU5D/aR/WMR62W/ua00IS
 noyWqtpdNk/7yR9HMzaCbsjgm+OZbtJbOSWCNaDo4TsXf+g+jQ+cf1Nl26cE73gB
 xWGcc3LKIkcjQpOU+Zu0fluF7OdnDNNTEoHprnahilBHDOtmSBDMwxAoJichCZMt
 mEN1CThG0B+YwlWH9yFL1bOQs1zHHFjHfJspdtqCok+UeD20p8QD1V8mlEsAkkT/
 alw0Gxa6T2KepuOF9KcMnx4IcpkqwpgkwcGXvwRWWchANgbi1ao=
 =UUcp
 -----END PGP SIGNATURE-----

Merge tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
   regarding flowtable hooks, from Phil Sutter.

2) Fix nft_audit.sh selftests with newer nft binaries, due to different
   (valid) audit output, also from Phil.

3) Disable BH when duplicating packets via nf_dup infrastructure,
   otherwise race on nf_skb_duplicated for locally generated traffic.
   From Eric.

4) Missing return in callback of selftest C program, from zhang jiao.

netfilter pull request 24-10-02

* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: Add missing return value
  netfilter: nf_tables: prevent nf_skb_duplicated corruption
  selftests: netfilter: Fix nft_audit.sh for newer nft binaries
  netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================

Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-03 12:01:05 +02:00
Wei Huang
f69767a1ad PCI: Add TLP Processing Hints (TPH) support
Add support for PCIe TLP Processing Hints (TPH) support (see PCIe r6.2,
sec 6.17).

Add TPH register definitions in pci_regs.h, including the TPH Requester
capability register, TPH Requester control register, TPH Completer
capability, and the ST fields of MSI-X entry.

Introduce pcie_enable_tph() and pcie_disable_tph(), enabling drivers to
toggle TPH support and configure specific ST mode as needed. Also add a new
kernel parameter, "pci=notph", allowing users to disable TPH support across
the entire system.

Link: https://lore.kernel.org/r/20241002165954.128085-2-wei.huang2@amd.com
Co-developed-by: Jing Liu <jing2.liu@intel.com>
Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com>
Co-developed-by: Eric Van Tassell <Eric.VanTassell@amd.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com>
Signed-off-by: Eric Van Tassell <Eric.VanTassell@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2024-10-02 16:20:01 -05:00
Toke Høiland-Jørgensen
09d88791c7 bpf: Make sure internal and UAPI bpf_redirect flags don't overlap
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.

With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.

Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6
Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com
2024-10-01 21:40:12 +02:00
Thomas Zimmermann
2dd0ef5d95 Merge drm/drm-next into drm-misc-next
Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-30 10:50:54 +02:00
Linus Torvalds
9c44575c78 bitmap-for-6.12
- switch all bitmamp APIs from inline to __always_inline from Brian Norris;
  - introduce GENMASK_U128() macro from Anshuman Khandual;
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmb22isACgkQsUSA/Tof
 vsie2gwAl3l5vye90xnD6N8wFmKBKAWXMn8Iby7JyM9gAn6j1QuE5AppS+3JtIpZ
 rPRSgFZIVPOgBtiKjb6zAWj7KbtCmaSW+L5ZVaLQ+vtwBVNpWIWHsHKu0uIpuugT
 3wp/IeaE92bc/mioqb27pj2Gnv+lzYBmbK7Mu08a3q1Adwv0I7BJ4GvqxN1lLAEW
 xrFB86xztqdV7QC45J7Q5nIyUw7UBYK078elQ8iKSj5BR8MeaEJiavETwx9DHgAO
 Z8cG94ek3IpvLpiexNcgG+FTezZj9PnTVHxry9o7CIctafiqjYqXAJ9gks1Q4QUu
 q1IjPAdueLTAMPkpK67sI3fwC6zPyX5d8DVDUTuA6qhCsMyHW687gTRy4LPR14LL
 gd1Tzg+J9DQ5KBoG4TYN/g5VoP1hkKQqpetaJhdPqmYocfmqZuzyItb+gBjhyvSp
 3YOgLg/4lULy3sZ6Qd/q8CWglWlaNYXXzf13H8f2qUpVx4NLTDOwjj/CVjZR/D0C
 wje/8XU3
 =8jNc
 -----END PGP SIGNATURE-----

Merge tag 'bitmap-for-6.12' of https://github.com/norov/linux

Pull bitmap updates from Yury Norov:

 - switch all bitmamp APIs from inline to __always_inline (Brian Norris)

   The __always_inline series improves on code generation, and now with
   the latest compiler versions is required to avoid compilation
   warnings. It spent enough in my backlog, and I'm thankful to Brian
   Norris for taking over and moving it forward.

 - introduce GENMASK_U128() macro (Anshuman Khandual)

   GENMASK_U128() is a prerequisite needed for arm64 development

* tag 'bitmap-for-6.12' of https://github.com/norov/linux:
  lib/test_bits.c: Add tests for GENMASK_U128()
  uapi: Define GENMASK_U128
  nodemask: Switch from inline to __always_inline
  cpumask: Switch from inline to __always_inline
  bitmap: Switch from inline to __always_inline
  find: Switch from inline to __always_inline
2024-09-27 12:10:45 -07:00
Linus Torvalds
653608c67a xen: branch for v6.12-rc1a
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZvZ8dgAKCRCAXGG7T9hj
 vhirAQCR1LAU+czZlqmx6jmKRPTGff1ss66vh04XbtgTjH+8PQEA8O5KvD/KnnxY
 AnrOvrx6fTLwR6iTN7ANVvPO3kGK/w0=
 =0Tol
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:
 "A second round of Xen related changes and features:

   - a small fix of the xen-pciback driver for a warning issued by
     sparse

   - support PCI passthrough when using a PVH dom0

   - enable loading the kernel in PVH mode at arbitrary addresses,
     avoiding conflicts with the memory map when running as a Xen dom0
     using the host memory layout"

* tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/pvh: Add 64bit relocation page tables
  x86/kernel: Move page table macros to header
  x86/pvh: Set phys_base when calling xen_prepare_pvh()
  x86/pvh: Make PVH entrypoint PIC for x86-64
  xen: sync elfnote.h from xen tree
  xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
  xen/privcmd: Add new syscall to get gsi from dev
  xen/pvh: Setup gsi for passthrough device
  xen/pci: Add a function to reset device for xen
2024-09-27 09:55:30 -07:00
Linus Torvalds
5e5466433d Char/Misc and other driver changes for 6.12-rc1
Here is the "big" set of char/misc and other driver subsystem changes
 for 6.12-rc1.  Sorry for the delay, conference travel for the past two
 weeks has this and my other pull requests showing up real late
 in the cycle.
 
 Lots of changes in here, primarily dominated by the usual IIO driver
 updates and additions, but there are also small driver subsystem updates
 all over the place.  Included in here are:
   - lots and lots of new IIO drivers and updates to existing ones
   - interconnect subsystem updates and new drivers
   - nvmem subsystem updates and new drivers
   - mhi driver updates
   - power supply subsystem updates
   - kobj_type const work for many different small subsystems
   - comedi driver fix
   - coresight subsystem and driver updates
   - fpga subsystem improvements
   - slimbus fixups
   - binder new feature addition for "frozen" notifications
   - lots and lots of other small driver updates and cleanups
 
 All of these have been in linux-next for a long time with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
 mLXk2wxl5+dt/dfNgZIp
 =x5HV
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.12-rc1.

  Lots of changes in here, primarily dominated by the usual IIO driver
  updates and additions, but there are also small driver subsystem
  updates all over the place. Included in here are:

   - lots and lots of new IIO drivers and updates to existing ones

   - interconnect subsystem updates and new drivers

   - nvmem subsystem updates and new drivers

   - mhi driver updates

   - power supply subsystem updates

   - kobj_type const work for many different small subsystems

   - comedi driver fix

   - coresight subsystem and driver updates

   - fpga subsystem improvements

   - slimbus fixups

   - binder new feature addition for "frozen" notifications

   - lots and lots of other small driver updates and cleanups

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
  greybus: gb-beagleplay: Add firmware upload API
  arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
  dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
  MAINTAINERS: Update path for U-Boot environment variables YAML
  nvmem: layouts: add U-Boot env layout
  comedi: ni_routing: tools: Check when the file could not be opened
  ocxl: Remove the unused declarations in headr file
  hpet: Fix the wrong format specifier
  uio: Constify struct kobj_type
  cxl: Constify struct kobj_type
  binder: modify the comment for binder_proc_unlock
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
  bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
  ...
2024-09-26 10:13:08 -07:00
Linus Torvalds
4965ddb166 USB/Thunderbolt update for 6.12-rc1
Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
 
 Nothing "major" in here, except for a new 9p network gadget that has
 been worked on for a long time (all of the needed acks are here.)  Other
 than that, it's the usual set of:
   - Thunderbolt / USB4 driver updates and additions for new hardware
   - dwc3 driver updates and new features added
   - xhci driver updates
   - typec driver updates
   - USB gadget updates and api additions to make some gadgets more
     configurable by userspace
   - dwc2 driver updates
   - usb phy driver updates
   - usbip feature additions
   - other minor USB driver updates
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvU0/g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykGcACfSqouxRg8FRtq+nIKHWXI9lOTnVcAoKd9PAgq
 1i7yCNopPEPEW8sjz1GX
 =mY+S
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.12-rc1.

  Nothing "major" in here, except for a new 9p network gadget that has
  been worked on for a long time (all of the needed acks are here)

  Other than that, it's the usual set of:

   - Thunderbolt / USB4 driver updates and additions for new hardware

   - dwc3 driver updates and new features added

   - xhci driver updates

   - typec driver updates

   - USB gadget updates and api additions to make some gadgets more
     configurable by userspace

   - dwc2 driver updates

   - usb phy driver updates

   - usbip feature additions

   - other minor USB driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  sub: cdns3: Use predefined PCI vendor ID constant
  sub: cdns2: Use predefined PCI vendor ID constant
  USB: misc: yurex: fix race between read and write
  USB: misc: cypress_cy7c63: check for short transfer
  USB: appledisplay: close race between probe and completion handler
  USB: class: CDC-ACM: fix race between get_serial and set_serial
  usb: r8a66597-hcd: make read-only const arrays static
  usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
  usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
  usb: storage: ene_ub6250: Fix right shift warnings
  usb: roles: Improve the fix for a false positive recursive locking complaint
  locking/mutex: Introduce mutex_init_with_key()
  locking/mutex: Define mutex_init() once
  net/9p/usbg: fix CONFIG_USB_GADGET dependency
  usb: xhci: fix loss of data on Cadence xHC
  usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
  usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
  usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
  usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
  usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
  ...
2024-09-26 09:45:36 -07:00
Linus Torvalds
0181f8c809 virtio: features, fixes, cleanups
Several new features here:
 
 	virtio-balloon supports new stats
 
 	vdpa supports setting mac address
 
 	vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
 
 	virtio_fs supports new sysfs entries for queue info
 
 	virtio/vsock performance has been improved
 
 Fixes, cleanups all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbz7ykPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpkk8H/A3vMRYXBzne9anezZLvADKS/CpX7v0DFEVj
 VfSMWXvYdUariYDyyb7pZsvK5QR22pE0pIaW6Kcgv9fNwq27M/H6g6NJk5ny8a7d
 216AQs1J28pXPPY+q03fhf3SzE3yHP8aeD9lyiO9QJYfs9vjtoyZeBGt3a4IUSX4
 ZeNBAx8xWTBcEDIIcZLdY1DNDTbZ4+qQ12Ln9IKq7D4xkE6l7Xh+HGdgTWTnDZ8P
 qEUUOmJTFKTQdOiVuU4NN3wzgHKWHdwKg0uWXo7ereYr3kYe3q//jCcLMv88a1x0
 XP7NRBQg/rsErwTMdLz6ffyqXJs6lGGqNXzRfZKEwAvmnh/+zs4=
 =gNBq
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-balloon supports new stats

   - vdpa supports setting mac address

   - vdpa/mlx5 suspend/resume as well as MKEY ops are now faster

   - virtio_fs supports new sysfs entries for queue info

   - virtio/vsock performance has been improved

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vsock/virtio: avoid queuing packets when intermediate queue is empty
  vsock/virtio: refactor virtio_transport_send_pkt_work
  fw_cfg: Constify struct kobj_type
  vdpa/mlx5: Postpone MR deletion
  vdpa/mlx5: Introduce init/destroy for MR resources
  vdpa/mlx5: Rename mr_mtx -> lock
  vdpa/mlx5: Extract mr members in own resource struct
  vdpa/mlx5: Rename function
  vdpa/mlx5: Delete direct MKEYs in parallel
  vdpa/mlx5: Create direct MKEYs in parallel
  MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
  virtio_fs: add sysfs entries for queue information
  virtio_fs: introduce virtio_fs_put_locked helper
  vdpa: Remove unused declarations
  vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
  vdpa/mlx5: Small improvement for change_num_qps()
  vdpa/mlx5: Keep notifiers during suspend but ignore
  vdpa/mlx5: Parallelize device resume
  vdpa/mlx5: Parallelize device suspend
  vdpa/mlx5: Use async API for vq modify commands
  ...
2024-09-26 08:43:17 -07:00
Phil Sutter
76f1ed087b netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
Fix the comment which incorrectly defines it as NLA_U32.

Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-26 17:14:35 +02:00
Mary Guillemard
f70000ef23 drm/panthor: Add DEV_QUERY_GROUP_PRIORITIES_INFO dev query
Expose allowed group priorities with a new device query.

This new uAPI will be used in Mesa to properly report what priorities a
user can use for EGL_IMG_context_priority.

Since this extends the uAPI and because userland needs a way to
advertise priorities accordingly, this also bumps the driver minor
version.

v2:
- Remove drm_panthor_group_allow_priority_flags definition
- Document that allowed_mask is a bitmask of drm_panthor_group_priority

v3:
- Use BIT macro in panthor_query_group_priorities_info
- Add r-b from Steven Price and Boris Brezillon

Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-4-mary.guillemard@collabora.com
2024-09-25 15:26:01 +01:00
Mary Guillemard
f73716fd45 drm/panthor: Add PANTHOR_GROUP_PRIORITY_REALTIME group priority
This adds a new value to drm_panthor_group_priority exposing the
realtime priority to userspace.

This is required to implement NV_context_priority_realtime in Mesa.

v2:
- Add Steven Price r-b

v3:
- Add Boris Brezillon r-b

Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-3-mary.guillemard@collabora.com
2024-09-25 15:25:51 +01:00
Maíra Canal
9f8e1c93a0
drm/v3d: Expose Super Pages capability
Add a new V3D parameter to expose the support of Super Pages to
userspace. The userspace might want to know this information to
apply optimizations that are specific to kernels with Super Pages
enabled.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-12-mcanal@igalia.com
2024-09-25 08:40:26 -03:00
Jiqian Chen
2fae6bb7be xen/privcmd: Add new syscall to get gsi from dev
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.

For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.

Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2024-09-25 09:54:55 +02:00
Linus Torvalds
f7fccaa772 fuse update for 6.12
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZvKlbgAKCRDh3BK/laaZ
 PLliAP9q5btlhlffnRg2LWCf4rIzbJ6vkORkc+GeyAXnWkIljQEA9En1K2vyg7Tk
 f9FvNQK9C+pS0GxURDRI7YedJ2f9FQ0=
 =wuY0
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

 - Add support for idmapped fuse mounts (Alexander Mikhalitsyn)

 - Add optimization when checking for writeback (yangyun)

 - Add tracepoints (Josef Bacik)

 - Clean up writeback code (Joanne Koong)

 - Clean up request queuing (me)

 - Misc fixes

* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
  fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
  fuse: clear FR_PENDING if abort is detected when sending request
  fs/fuse: convert to use invalid_mnt_idmap
  fs/mnt_idmapping: introduce an invalid_mnt_idmap
  fs/fuse: introduce and use fuse_simple_idmap_request() helper
  fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
  fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
  virtio_fs: allow idmapped mounts
  fuse: allow idmapped mounts
  fuse: warn if fuse_access is called when idmapped mounts are allowed
  fuse: handle idmappings properly in ->write_iter()
  fuse: support idmapped ->rename op
  fuse: support idmapped ->set_acl
  fuse: drop idmap argument from __fuse_get_acl
  fuse: support idmapped ->setattr op
  fuse: support idmapped ->permission inode op
  fuse: support idmapped getattr inode op
  fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
  fuse: support idmapped FUSE_EXT_GROUPS
  fuse: add an idmap argument to fuse_simple_request
  ...
2024-09-24 15:29:42 -07:00
Linus Torvalds
4165cee7ec Description for this pull request:
- Clean-up unnecessary codes as ->valid_size is supported.
 - buffered-IO fallback is no longer needed when using direct-IO.
 - Move ->valid_size extension from mmap to ->page_mkwrite.
   This improves the overhead caused by unnecessary zero-out during mmap.
 - Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table().
 - Add sops->shutdown and ioctl.
 - Add Yuezhang Mo as a reviwer.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE6NzKS6Uv/XAAGHgyZwv7A1FEIQgFAmbytEQWHGxpbmtpbmpl
 b25Aa2VybmVsLm9yZwAKCRBnC/sDUUQhCEqUD/sEerRjBeNi+ivTvYtxqQGaDCnj
 Re6gBUt138rF2qyVcX3dP0wMHVNEHzjtdJjZGuQXAKttkZ1qW1wGbz0kyIyFjRfZ
 MHPaaqAavDiDFqxZnJvB9xKsuU6mb0Kr0JC6mKet3KD+Q2VekePSX+3SvwRDcPNb
 4CroYvJtOOWy21FKvKc2LxZBrowTElCPIhiXbHgWRhJBVhi4edrDo0391enzkKwt
 Is0/RzMbAsQ08Ap+TH6YIlPtA9aVSiTDyal1YaIgpXjaVxqF3MpMfPFG6+XJ8GOw
 k9BXM5XH5YXPZXallG8Fkx5Hh6Nrf9Vuvt68KbLQuzL6MdDEb8vTPEycQFHpapLx
 hk5TrL23Ok2RU/AJJXUDxii+J+3YzuTgIL6sdgJbaYb1ZYebiMzjRkwUJpH3dqg+
 lx1QtYWsVRR8fTtBEle1yVbOPcuyUWUkMpKVIUseVL0EiQNpiwBSGKKuus3Cul4O
 KA6Kx8hYEguHAIBn5U52mzIl9Ye+j+QyRmcmA/qnObk/1h+5FKn+HgnMINex0qmz
 PXzI+cLta6TZKtb8+KnTNImRXCDtcvtG9wkF25M3vmzBMiLfTnEZsXKwF+fPiydw
 +N19vX6HVT8JpIOGhbsRQp7abLR2IhYCeZQCWdT09Ol0VUsXx87+CfsLQpM3xw4U
 79nicqiwHjVP98Wjyg==
 =vVfO
 -----END PGP SIGNATURE-----

Merge tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat

Pull exfat updates from Namjae Jeon:

 - Clean-up unnecessary codes as ->valid_size is supported

 - buffered-IO fallback is no longer needed when using direct-IO

 - Move ->valid_size extension from mmap to ->page_mkwrite. This
   improves the overhead caused by unnecessary zero-out during mmap.

 - Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()

 - Add sops->shutdown and ioctl

 - Add Yuezhang Mo as a reviwer

* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  MAINTAINERS: exfat: add myself as reviewer
  exfat: resolve memory leak from exfat_create_upcase_table()
  exfat: move extend valid_size into ->page_mkwrite()
  exfat: fix memory leak in exfat_load_bitmap()
  exfat: Implement sops->shutdown and ioctl
  exfat: do not fallback to buffered write
  exfat: drop ->i_size_ondisk
2024-09-24 15:26:04 -07:00
Linus Torvalds
db78436bed iommufd 6.12 merge window pull
Collection of small cleanup and one fix:
 
 - Sort headers and struct forward declarations
 
 - Fix random selftest failures in some cases due to dirty tracking tests
 
 - Have the reserved IOVA regions mechanism work when a HWPT is used as a
   nesting parent. This updates the nesting parent's IOAS with the reserved
   regions of the device and will also install the ITS doorbell page on
   ARM.
 
 - Add missed validation of parent domain ops against the current iommu
 
 - Fix a syzkaller bug related to integer overflow during ALIGN()
 
 - Tidy two iommu_domain attach paths
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZvGksgAKCRCFwuHvBreF
 YbSfAP931gRT85t0r7z6tH1GJVIviX2mg5TYGsb9SkrxVKcKAwD9H65T7tJRzTyP
 K1oYBY7wtpHbR38hjFbnRPD7ZM+k8A4=
 =r7jm
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd

Pull iommufd updates from Jason Gunthorpe:
 "Collection of small cleanup and one fix:

   - Sort headers and struct forward declarations

   - Fix random selftest failures in some cases due to dirty tracking
     tests

   - Have the reserved IOVA regions mechanism work when a HWPT is used
     as a nesting parent. This updates the nesting parent's IOAS with
     the reserved regions of the device and will also install the ITS
     doorbell page on ARM.

   - Add missed validation of parent domain ops against the current
     iommu

   - Fix a syzkaller bug related to integer overflow during ALIGN()

   - Tidy two iommu_domain attach paths"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommu: Set iommu_attach_handle->domain in core
  iommufd: Avoid duplicated __iommu_group_set_core_domain() call
  iommufd: Protect against overflow of ALIGN() during iova allocation
  iommufd: Reorder struct forward declarations
  iommufd: Check the domain owner of the parent before creating a nesting domain
  iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
  iommufd/selftest: Fix buffer read overrrun in the dirty test
  iommufd: Reorder include files
2024-09-24 11:55:26 -07:00
Linus Torvalds
54d7e8190e RDMA v6.12 merge window
Usual collection of small improvements and fixes:
 
 - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts, hfi,
   erdma, hns, irdma
 
 - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
 
 - Multipath PCI for mlx5
 
 - Variable size work queue, SRQ changes, and relaxed ordering for new bnxt HW
 
 - New ODP fault resolution FW protocol in mlx5
 
 - New "rdma monitor" netlink mechanism
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZvGZowAKCRCFwuHvBreF
 YcvbAP9abSxZte3zzG1ZJ/6BShSCGJvu4RMMMQI6wNJWZZiJ5wEA18MdaWzGFS8O
 BzP48Z/0VGsd2MOfNX4JeyYIs7SNYQA=
 =FXLo
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes, nothing especially
  stands out to me here.

  The new multipath PCI feature is a sign of things to come, I think we
  will see more of this in the next 10 years. Broadcom and HNS continue
  to update their drivers for their new HW generations.

  Summary:

   - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
     hfi, erdma, hns, irdma

   - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls

   - Multipath PCI for mlx5

   - Variable size work queue, SRQ changes, and relaxed ordering for new
     bnxt HW

   - New ODP fault resolution FW protocol in mlx5

   - New 'rdma monitor' netlink mechanism"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA/bnxt_re: Remove the unused variable en_dev
  RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
  RDMA/irdma: fix error message in irdma_modify_qp_roce()
  RDMA/cxgb4: Added NULL check for lookup_atid
  RDMA/hns: Fix ah error counter in sw stat not increasing
  RDMA/bnxt_re: Recover the device when FW error is detected
  RDMA/bnxt_re: Group all operations under add_device and remove_device
  RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
  RDMA/bnxt_re: Change aux driver data to en_info to hold more information
  RDMA/nldev: Expose whether RDMA monitoring is supported
  RDMA/nldev: Add support for RDMA monitoring
  RDMA/mlx5: Use IB set_netdev and get_netdev functions
  RDMA/device: Remove optimization in ib_device_get_netdev()
  RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
  RDMA/mlx5: Obtain upper net device only when needed
  RDMA/mlx5: Check RoCE LAG status before getting netdev
  RDMA/mlx5: Consider the query_vuid cap for data_direct
  net/mlx5: Handle memory scheme ODP capabilities
  RDMA/mlx5: Add implicit MR handling to ODP memory scheme
  RDMA/mlx5: Add handling for memory scheme page fault events
  ...
2024-09-24 11:48:00 -07:00
Linus Torvalds
3147a0689d for-6.12/io_uring-20240922
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmbvv30QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpj3+EACs346FzM8PlZe1GxBZ6OnQX80blwoldAxC
 +Abl5xjoJKUgA7rY3lJVBRNR6olA/4I2VD3g8b3RT6lpd/oKzPFg7FOj5Dc/oN+c
 Fo6C7zZdr8caokpL4pfwgyG8ZNssQgRg8e0kRSw8A7AMo1zUazqAXtxjRzeMEOLC
 1kWRYGdHCbVjx+hRIyX6KKP427Z5nXvcqFOC0BOpd5jDNYVh9WjNNyUE7trkGJ7o
 1cjlpaaOURS0yU/4hue6tRnM8LDjaImyTyISvBWzKfKvpc19K1alOQNvHIoIeiBQ
 5MgCNkSpbRmUTrydYVEQXl0Cia2d5+0KQsavUB9nZ8M++NftbRr/i26xT8ReZzXI
 NjaedDF+MyOKeJaft2ZeKH8GgWolysMBa4e89CveRxosa/6gwHCkkB4UK9b3gaBB
 Fij1zh/7fIVG7Tz8yNUDyGe6DzOEol1bn1KnL35/9nuCCRnSAM0vRPwJSkurlQ8B
 PqVUS3BArn+LQZmSZ3HJVKOHv2QAY8etqWizvVmu4DB9Ar+uZ6Ur2uwfMN9JAODP
 Fm2qVvxS73QlrvisdbnVbTzqBnqh3Rs4mb5my/gCWO1s67qtu3abSJCSzcnyxQdd
 yBMDegJxTNv6DErNjPEF4qDODwSTIzswr//kOeLns1EtDGfrK8nxUfIKPQUwLSTO
 Y7h2ru83uA==
 =goTY
 -----END PGP SIGNATURE-----

Merge tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux

Pull more io_uring updates from Jens Axboe:
 "Mostly just a set of fixes in here, or little changes that didn't get
  included in the initial pull request. This contains:

   - Move the SQPOLL napi polling outside the submission lock (Olivier)

   - Rename of the "copy buffers" API that got added in the 6.12 merge
     window. There's really no copying going on, it's just referencing
     the buffers. After a bit of consideration, decided that it was
     better to simply rename this to avoid potential confusion (me)

   - Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
     start + len tracking rather than having start / end in there, and
     by removing the caching of folio_mask when we can just calculate it
     from folio_shift when we need it (me)

   - Fixes for the SQPOLL affinity checking (me, Felix)

   - Fix for how cqring waiting checks for the presence of task_work.
     Just check it directly rather than check for a specific
     notification mechanism (me)

   - Tweak to how request linking is represented in tracing (me)

   - Fix a syzbot report that deliberately sets up a huge list of
     overflow entries, and then hits rcu stalls when flushing this list.
     Just check for the need to preempt, and drop/reacquire locks in the
     loop. There's no state maintained over the loop itself, and each
     entry is yanked from head-of-list (me)"

* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
  io_uring: check if we need to reschedule during overflow flush
  io_uring: improve request linking trace
  io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
  io_uring/sqpoll: do the napi busy poll outside the submission block
  io_uring: clean up a type in io_uring_register_get_file()
  io_uring/sqpoll: do not put cpumask on stack
  io_uring/sqpoll: retain test for whether the CPU is valid
  io_uring/rsrc: change ubuf->ubuf_end to length tracking
  io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
  io_uring: rename "copy buffers" to "clone buffers"
2024-09-24 11:11:38 -07:00