Currently lock contention timestamp is maintained in a hash map keyed by
pid. That means it needs to get and release a map element (which is
proctected by spinlock!) on each contention begin and end pair. This
can impact on performance if there are a lot of contention (usually from
spinlocks).
It used to go with task local storage but it had an issue on memory
allocation in some critical paths. Although it's addressed in recent
kernels IIUC, the tool should support old kernels too. So it cannot
simply switch to the task local storage at least for now.
As spinlocks create lots of contention and they disabled preemption
during the spinning, it can use per-cpu array to keep the timestamp to
avoid overhead in hashmap update and delete.
In contention_begin, it's easy to check the lock types since it can see
the flags. But contention_end cannot see it. So let's try to per-cpu
array first (unconditionally) if it has an active element (lock != 0).
Then it should be used and per-task tstamp map should not be used until
the per-cpu array element is cleared which means nested spinlock
contention (if any) was finished and it nows see (the outer) lock.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-3-namhyung@kernel.org
When pelem is NULL, it'd create a new entry with zero data. But it
might be preempted by IRQ/NMI just before calling bpf_map_update_elem()
then there's a chance to call it twice for the same pid. So it'd be
better to use BPF_NOEXIST flag and check the return value to prevent
the race.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-2-namhyung@kernel.org
It checks the current lock to calculated the delta of contention time.
The address is saved in the tstamp map which is allocated at begining of
contention and released at end of contention.
But it's possible for bpf_map_delete_elem() to fail. In that case, the
element in the tstamp map kept for the current lock and it makes the
next contention for the same lock tracked incorrectly. Specificially
the next contention begin will see the existing element for the task and
it'd just return. Then the next contention end will see the element and
calculate the time using the timestamp for the previous begin.
This can result in a large value for two small contentions happened from
time to time. Let's clear the lock address so that it can be updated
next time even if the bpf_map_delete_elem() failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231020204741.1869520-1-namhyung@kernel.org
evsel__increase_rlimit() helper does nothing with evsel, and description
of the functionality is inaccurate, rename it and move to util/rlimit.c.
By the way, fix a checkppatch warning about misplaced license tag:
WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead
#160: FILE: tools/perf/util/rlimit.h:3:
/* SPDX-License-Identifier: LGPL-2.1 */
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231023033144.1011896-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The -G/--cgroups option is to put sender and receiver in different
cgroups in order to measure cgroup context switch overheads.
Users need to make sure the cgroups exist and accessible. The following
example should the effect of this change. Please don't forget taskset
before the perf bench to measure cgroup switches properly. Otherwise
each task would run on a different CPU and generate cgroup switches
regardless of this change.
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000':
20,001 context-switches
2 cgroup-switches
0.053449651 seconds time elapsed
0.011286000 seconds user
0.041869000 seconds sys
# perf stat -e context-switches,cgroup-switches \
> taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB > /dev/null
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB':
20,001 context-switches
20,001 cgroup-switches
0.052768627 seconds time elapsed
0.006284000 seconds user
0.046266000 seconds sys
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20231017202342.1353124-1-namhyung@kernel.org
CoreSight might be not available, in such case, skip the tests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: vmolnaro@redhat.com
Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If using parallel threads to collect data, perf record needs at least 6 fds
per CPU. (one for sys_perf_event_open, four for pipe msg and ack of the
pipe, see record__thread_data_open_pipes(), and one for open perf.data.XXX)
For an environment with more than 100 cores, if perf record uses both
`-a` and `--threads` options, it is easy to exceed the upper limit of the
file descriptor number, when we run out of them try to increase the limits.
Before:
$ ulimit -n
1024
$ lscpu | grep 'On-line CPU(s)'
On-line CPU(s) list: 0-159
$ perf record --threads -a sleep 1
Failed to create data directory: Too many open files
After:
$ ulimit -n
1024
$ lscpu | grep 'On-line CPU(s)'
On-line CPU(s) list: 0-159
$ perf record --threads -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.394 MB perf.data (1576 samples) ]
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231013075945.698874-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit cf26e043c2a9 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes: 7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Start generating sysreg-defs.h in anticipation of updating sysreg.h to a
version that needs the generated output.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes: b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat_all_metricgroups.sh reports
below warning:
In ./tests/shell/stat_all_metricgroups.sh line 7:
function ParanoidAndNotRoot()
^-- SC2112: 'function' keyword is non-standard. Delete it.
As per the format, "function" is a non-standard keyword that
can be used to declare functions. Fix this by removing the
"function" keyword from ParanoidAndNotRoot function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on record_sideband.sh throws below
warning:
In tests/shell/record_sideband.sh line 25:
if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null
^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
This shows shellcheck warning SC2069 where the redirection
order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix
the redirection of perf record output
Fixes: 23b97c7ee963 ("perf test: Add test case for record sideband events")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: disgoel@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on lock_contention.sh generates below
warning
In tests/shell/lock_contention.sh line 36:
if [ `nproc` -lt 4 ]; then
^-----^ SC2046: Quote this to prevent word splitting.
Here since nproc will generate a single word output
and there is no possibility of word splitting, this
warning can be ignored. Use exception for this with
"disable" option in shellcheck. This warning is observed
after commit:
"commit 29441ab3a30a ("perf test lock_contention.sh: Skip test
if not enough CPUs")"
Fixes: 29441ab3a30a ("perf test lock_contention.sh: Skip test if not enough CPUs")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Simple expression parser test fails in powerpc as below:
4: Simple expression parser
test child forked, pid 170385
Using CPUID 004e2102
division by zero
syntax error
syntax error
FAILED tests/expr.c:65 parse test failed
test child finished with -1
Simple expression parser: FAILED!
This is observed after commit:
'commit 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")'
With this commit, a new expression builtin strcmp_cpuid_str
got added. This function takes an 'ID' type value, which is
a string. So expression parse for strcmp_cpuid_str expects
const char * as cpuid value type. In case of powerpc, CPU IDs
are numbers. Hence it doesn't get interpreted correctly by
bison parser. Example in case of power9, cpuid string returns
as: 004e2102
cpuid of string type is expected in two cases:
1. char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused);
Testcase "tests/expr.c" uses "perf_pmu__getcpuid" which calls
get_cpuid_str to get the cpuid string.
2. cpuid field in :struct pmu_events_map
struct pmu_events_map {
const char *arch;
const char *cpuid;
Here cpuid field is used in "perf_pmu__find_events_table"
function as "strcmp_cpuid_str(map->cpuid, cpuid)". The
value for cpuid field is picked from mapfile.csv.
Fix the mapfile.csv and get_cpuid_str function to prefix
cpuid with 0x so that it gets correctly interpreted by
the bison parser
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231009050052.64935-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When users pass the option '--timestamp' or '-T' in the record command,
all events will set the PERF_SAMPLE_TIME bit in the attribution. In
this case, the AUX event will record the kernel timestamp, but it
doesn't mean Arm CoreSight enables timestamp packets in its hardware
tracing.
If the option '--timestamp' or '-T' is set, this patch always enables
Arm CoreSight timestamp, as a result, the bit 28 in event's config is to
be set.
Before:
# perf record -e cs_etm// --per-thread --timestamp -- ls
# perf script --header-only
...
# event : name = cs_etm//, , id = { 69 }, type = 12, size = 136,
config = 0, { sample_period, sample_freq } = 1,
sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST,
disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1
...
After:
# perf record -e cs_etm// --per-thread --timestamp -- ls
# perf script --header-only
...
# event : name = cs_etm//, , id = { 49 }, type = 12, size = 136,
config = 0x10000000, { sample_period, sample_freq } = 1,
sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST,
disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1
...
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231014074159.1667880-3-leo.yan@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
So far, it's impossible to validate timestamp trace in Arm CoreSight when
the perf is in the per-thread mode. E.g. for the command:
perf record -e cs_etm/timestamp/ --per-thread -- ls
The command enables config 'timestamp' for 'cs_etm' event in the
per-thread mode. In this case, the function cs_etm_validate_config()
directly bails out and skips validation.
Given profiled process can be scheduled on any CPUs in the per-thread
mode, this patch validates timestamp tracing for all CPUs when detect
the CPU map is empty.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231014074159.1667880-2-leo.yan@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The default config is computed during creation of the PMU and may do
things like scanning sysfs, when the PMU may just be used as part of
scanning. Change default_config to perf_event_attr_init_default, a
callback that is used when a default config needs initializing. This
avoids holding onto the memory for a perf_event_attr and copying.
On a tigerlake laptop running the pmu-scan benchmark:
Before:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 28.780 usec (+- 0.503 usec)
Average PMU scanning took: 283.480 usec (+- 18.471 usec)
Number of openat syscalls: 30,227
After:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 27.880 usec (+- 0.169 usec)
Average PMU scanning took: 245.260 usec (+- 15.758 usec)
Number of openat syscalls: 28,914
Over 3 runs it is a nearly 12% reduction in execution time and a 4.3%
of openat calls.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
strcmp_cpuid_str performs regular expression comparisons and so per
CPUID linear searches over the perf_events_map are expensive. Add a
helper function called map_for_pmu that does the search but also
caches the map specific to a PMU. As the PMU may differ, also cache
the CPUID string so that PMUs with the same CPUID string don't require
the linear search and regular expression comparisons. This speeds
loading PMUs as the search is done once per PMU to find the
appropriate tables.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add const to related APIs, this is so they can be used to default
initialize a perf_event_attr from a const pmu.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
File APIs don't alter the struct pmu so allow const ones to be passed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid setting PMU values in arm_spe_pmu_default_config, move to
perf_pmu__arch_init.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid setting PMU values in intel_pt_pmu_default_config, move to
perf_pmu__arch_init.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Assign default_config as part of the init. perf_pmu__get_default_config
was doing more than just getting the default config and so this is
intended to better align with the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use get_unaligned_le64() instead of memcpy_le64(..., 8) because it produces
simpler code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-6-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid unaligned access by using get_unaligned_le16(), get_unaligned_le32()
and get_unaligned_le64().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-5-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add get_unaligned_le16(), get_unaligned_le32 and get_unaligned_le64, same
as include/asm-generic/unaligned.h. And add include/asm-generic/unaligned.h
to check-headers.sh bringing tools/include/asm-generic/unaligned.h up to
date so that the kernel and tools versions match.
Use diagnostic pragmas to ignore -Wpacked used by perf build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-2-adrian.hunter@intel.com
Link: https://lore.kernel.org/r/20231010142234.20061-1-adrian.hunter@intel.com
[ squashed check-header.sh addition ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Memory leaks were detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-20-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Memory leaks were detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-19-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If opendir failed then closedir was passed NULL which is
erroneous. Caught by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-18-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add missing free on an error path as detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-16-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If a memory allocation fails then the strdup-ed string needs
freeing. Detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On success path the sib_core and sib_thr values weren't being
freed. Detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On other code paths browser->he_selection is NULL checked, add a
missing case reported by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the unlikely case of having a symbol without a mapping, avoid a
NULL dereference that clang-tidy warns about.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
pmu should be initialized to NULL before perf_pmus__scan loop. Fix and
shrink the scope of pmu at the same time. Issue detected by clang-tidy.
Fixes: 5752c20f3787 ("perf mem: Scan all PMUs instead of just core ones")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
jit_repipe_unwinding_info is called in a loop by jit_process_dump,
avoid leaking unwinding_data by free-ing before overwriting. Error
detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
clang-tidy was warning:
```
util/env.c:334:23: warning: Access to field 'nr_pmu_mappings' results in a dereference of a null pointer (loaded from variable 'env') [clang-analyzer-core.NullDereference]
env->nr_pmu_mappings = pmu_num;
```
As functions are called potentially when !env was true. This condition
could never be true as it would produce a segv, so remove the
unnecessary NULL tests and silence clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The buildid filename is first determined and then from this the
buildid read. If getting the filename fails then the buildid will be
used for a later memcmp uninitialized. Detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Found by clang-tidy:
```
bench/uprobe.c:98:3: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc]
bench_uprobe_bpf__destroy(skel);
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.
Fixes: 6fd1e5191591 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By default perf will fail the build if the development files for
libtraceevent are not available.
To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.
Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This is a longstanding to do list entry: we need a way to see that a
sample took place while in idle state, as the current way to do it is
to infer that by the name of the functions that in such state have
more samples, IOW: a hack.
Maybe we can do flip a bit in samples that take place inside the
enter/exit idle section in do_idle()?
But till then, add one more :-\
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/ZR66Qgbcltt+zG7F@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
We specify that a "num_hex" comprises 1 or more digits, however, that
allows strtoull to fail with ERANGE. Limit the number of hex digits to
being between 1 and 16.
Before:
```
$ perf stat -e 'cpu/rE7574c47490475745/' true
perf: util/parse-events.c:215: fix_raw: Assertion `errno == 0' failed.
Aborted (core dumped)
```
After:
```
$ perf stat -e 'cpu/rE7574c47490475745/' true
event syntax error: 'cpu/rE7574c47490475745/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'cpu'
Initial error:
event syntax error: 'cpu/rE7574c47490475745/'
\___ unknown term 'rE7574c47490475745' for pmu 'cpu'
valid terms: event,pc,edge,offcore_rsp,ldlat,inv,umask,frontend,cmask,config,config1,config2,config3,name,period,percore,metric-id
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Issue found through fuzz testing.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230907210533.3712979-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZRIFKAAKCRCMstVUGiXM
g/pXAP9HLB2s+beBTK5iQU4/NfqmAVSl303QCoR9xLByo38vfAEAlLiRIh061pTi
PRlXVuY9bUQPyCSYsiBHv/fmLqdQdwU=
=ti6G
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' into perf-tools-next
To pick up the 'perf bench sched-seccomp-notify' changes to allow us to
continue build testing perf-tools-next with the set of distro
containers, where some older ones don't have a recent enough seccomp.h
UAPI header that contains defines needed by this new 'perf bench'
workload.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
