Quota counter updates are tracked via incore objects which hang off the
xfs_trans object. These changes are then turned into dirty log items in
xfs_trans_apply_dquot_deltas just prior to commiting the log items to
the CIL.
However, updating the incore deltas do not cause XFS_TRANS_DIRTY to be
set on the transaction. In other words, a pure quota counter update
will be silently discarded if there are no other dirty log items
attached to the transaction.
This is currently not the case anywhere in the filesystem because quota
updates always dirty at least one other metadata item, but a subsequent
bug fix will add dquot log item precommits, so we actually need a dirty
dquot log item prior to xfs_trans_run_precommits. Also let's not leave
a logic bomb.
Cc: <stable@vger.kernel.org> # v2.6.35
Fixes: 0924378a68 ("xfs: split out iclog writing from xfs_trans_commit()")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Superblock counter updates are tracked via per-transaction counters in
the xfs_trans object. These changes are then turned into dirty log
items in xfs_trans_apply_sb_deltas just prior to commiting the log items
to the CIL.
However, updating the per-transaction counter deltas do not cause
XFS_TRANS_DIRTY to be set on the transaction. In other words, a pure sb
counter update will be silently discarded if there are no other dirty
log items attached to the transaction.
This is currently not the case anywhere in the filesystem because sb
counter updates always dirty at least one other metadata item, but let's
not leave a logic bomb.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, __xfs_trans_commit calls xfs_defer_finish_noroll, which calls
__xfs_trans_commit again on the same transaction. In other words,
there's a nested function call (albeit with slightly different
arguments) that has caused minor amounts of confusion in the past.
There's no reason to keep this around, since there's only one place
where we actually want the xfs_defer_finish_noroll, and that is in the
top level xfs_trans_commit call.
This also reduces stack usage a little bit.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Committing a transaction tx0 with a defer ops chain of (A, B, C)
creates a chain of transactions that looks like this:
tx0 -> txA -> txB -> txC
Prior to commit cb04211748, __xfs_trans_commit would run precommits
on tx0, then call xfs_defer_finish_noroll to convert A-C to tx[A-C].
Unfortunately, after the finish_noroll loop we forgot to run precommits
on txC. That was fixed by adding the second precommit call.
Unfortunately, none of us remembered that xfs_defer_finish_noroll
calls __xfs_trans_commit a second time to commit tx0 before finishing
work A in txA and committing that. In other words, we run precommits
twice on tx0:
xfs_trans_commit(tx0)
__xfs_trans_commit(tx0, false)
xfs_trans_run_precommits(tx0)
xfs_defer_finish_noroll(tx0)
xfs_trans_roll(tx0)
txA = xfs_trans_dup(tx0)
__xfs_trans_commit(tx0, true)
xfs_trans_run_precommits(tx0)
This currently isn't an issue because the inode item precommit is
idempotent; the iunlink item precommit deletes itself so it can't be
called again; and the buffer/dquot item precommits only check the incore
objects for corruption. However, it doesn't make sense to run
precommits twice.
Fix this situation by only running precommits after finish_noroll.
Cc: <stable@vger.kernel.org> # v6.4
Fixes: cb04211748 ("xfs: defered work could create precommits")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Debugging a filesystem patch with generic/475 caused the system to hang
after observing the following sequences in dmesg:
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5
XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5
XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5
XFS (dm-0): log I/O error -5
XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem.
XFS (dm-0): Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs]
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7
The system is stuck in unmount trying to lock a couple of inodes so that
they can be purged. The dquot corruption notice above is a clue to what
happened -- a link() call tried to set up a transaction to link a child
into a directory. Quota reservation for the transaction failed after IO
errors shut down the filesystem, but then we forgot to unlock the inodes
on our way out. Fix that.
Cc: <stable@vger.kernel.org> # v6.10
Fixes: bd5562111d ("xfs: Hold inode locks in xfs_trans_alloc_dir")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix a minor mistakes in the scrub tracepoints that can manifest when
inode-rooted btrees are enabled. The existing code worked fine for bmap
btrees, but we should tighten the code up to be less sloppy.
Cc: <stable@vger.kernel.org> # v5.7
Fixes: 92219c292a ("xfs: convert btree cursor inode-private member names")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 2c813ad66a, I partially fixed a bug wherein xfs_btree_insrec
would erroneously try to update the parent's key for a block that had
been split if we decided to insert the new record into the new block.
The solution was to detect this situation and update the in-core key
value that we pass up to the caller so that the caller will (eventually)
add the new block to the parent level of the tree with the correct key.
However, I missed a subtlety about the way inode-rooted btrees work. If
the full block was a maximally sized inode root block, we'll solve that
fullness by moving the root block's records to a new block, resizing the
root block, and updating the root to point to the new block. We don't
pass a pointer to the new block to the caller because that work has
already been done. The new record will /always/ land in the new block,
so in this case we need to use xfs_btree_update_keys to update the keys.
This bug can theoretically manifest itself in the very rare case that we
split a bmbt root block and the new record lands in the very first slot
of the new block, though I've never managed to trigger it in practice.
However, it is very easy to reproduce by running generic/522 with the
realtime rmapbt patchset if rtinherit=1.
Cc: <stable@vger.kernel.org> # v4.8
Fixes: 2c813ad66a ("xfs: support btrees with overlapping intervals for keys")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
smatch reported that we screwed up the error cleanup in this function.
Fix it.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: ae897e0bed ("xfs: support creating per-RTG files in growfs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_bmap_rtalloc initializes the bno_hint variable to NULLRTBLOCK (aka
NULLFSBLOCK). If the allocation request is for a file range that's
adjacent to an existing mapping, it will then change bno_hint to the
blkno hint in the bmalloca structure.
In other words, bno_hint is either a rt block number, or it's all 1s.
Unfortunately, commit ec12f97f1b didn't take the NULLRTBLOCK state
into account, which means that it tries to translate that into a
realtime extent number. We then end up with an obnoxiously high rtx
number and pointlessly feed that to the near allocator. This often
fails and falls back to the by-size allocator. Seeing as we had no
locality hint anyway, this is a waste of time.
Fix the code to detect a lack of bno_hint correctly. This was detected
by running xfs/009 with metadir enabled and a 28k rt extent size.
Cc: <stable@vger.kernel.org> # v6.12
Fixes: ec12f97f1b ("xfs: make the rtalloc start hint a xfs_rtblock_t")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Once in a long while, xfs/566 and xfs/801 report directory corruption in
one of the metadata subdirectories while it's forcibly rebuilding all
filesystem metadata. I observed the following sequence of events:
1. Initiate a repair of the parent pointers for the /quota/user file.
This is the secret file containing user quota data.
2. The pptr repair thread creates a temporary file and begins staging
parent pointers in the ondisk metadata in preparation for an
exchange-range to commit the new pptr data.
3. At the same time, initiate a repair of the /quota directory itself.
4. The dir repair thread finds the temporary file from (2), scans it for
parent pointers, and stages a dirent in its own temporary dir in
preparation to commit the fixed directory.
5. The parent pointer repair completes and frees the temporary file.
6. The dir repair commits the new directory and scans it again. It
finds the dirent that points to the old temporary file in (2) and
marks the directory corrupt.
Oops! Repair code must never scan the temporary files that other repair
functions create to stage new metadata. They're not supposed to do
that, but the predicate function xrep_is_tempfile is incorrect because
it assumes that any XFS_DIFLAG2_METADATA file cannot ever be a temporary
file, but xrep_tempfile_adjust_directory_tree creates exactly that.
Fix this by setting the IRECOVERY flag on temporary metadata directory
inodes and using that to correct the predicate. Repair code is supposed
to erase all the data in temporary files before releasing them, so it's
ok if a thread scans the temporary file after we drop IRECOVERY.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: bb6cdd5529 ("xfs: hide metadata inodes from everyone because they are special")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we need to reset a symlink target to the "durr it's busted" string,
then we clear the zapped flag as well. However, this should be using
the provided helper so that we don't set the zapped state on an
otherwise ok symlink.
Cc: <stable@vger.kernel.org> # v6.10
Fixes: 2651923d8d ("xfs: online repair of symbolic links")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit d9041681dd we introduced some XFS_SICK_*ZAPPED flags so
that the inode record repair code could clean up a damaged inode record
enough to iget the inode but still be able to remember that the higher
level repair code needs to be called. As part of that, we introduced a
xchk_mark_healthy_if_clean helper that is supposed to cause the ZAPPED
state to be removed if that higher level metadata actually checks out.
This was done by setting additional bits in sick_mask hoping that
xchk_update_health will clear all those bits after a healthy scrub.
Unfortunately, that's not quite what sick_mask means -- bits in that
mask are indeed cleared if the metadata is healthy, but they're set if
the metadata is NOT healthy. fsck is only intended to set the ZAPPED
bits explicitly.
If something else sets the CORRUPT/XCORRUPT state after the
xchk_mark_healthy_if_clean call, we end up marking the metadata zapped.
This can happen if the following sequence happens:
1. Scrub runs, discovers that the metadata is fine but could be
optimized and calls xchk_mark_healthy_if_clean on a ZAPPED flag.
That causes the ZAPPED flag to be set in sick_mask because the
metadata is not CORRUPT or XCORRUPT.
2. Repair runs to optimize the metadata.
3. Some other metadata used for cross-referencing in (1) becomes
corrupt.
4. Post-repair scrub runs, but this time it sets CORRUPT or XCORRUPT due
to the events in (3).
5. Now the xchk_health_update sets the ZAPPED flag on the metadata we
just repaired. This is not the correct state.
Fix this by moving the "if healthy" mask to a separate field, and only
ever using it to clear the sick state.
Cc: <stable@vger.kernel.org> # v6.8
Fixes: d9041681dd ("xfs: set inode sick state flags when we zap either ondisk fork")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Way back when we first implemented FICLONE for XFS, life was simple --
either the the entire remapping completed, or something happened and we
had to return an errno explaining what happened. Neither of those
ioctls support returning partial results, so it's all or nothing.
Then things got complicated when copy_file_range came along, because it
actually can return the number of bytes copied, so commit 3f68c1f562
tried to make it so that we could return a partial result if the
REMAP_FILE_CAN_SHORTEN flag is set. This is also how FIDEDUPERANGE can
indicate that the kernel performed a partial deduplication.
Unfortunately, the logic is wrong if an error stops the remapping and
CAN_SHORTEN is not set. Because those callers cannot return partial
results, it is an error for ->remap_file_range to return a positive
quantity that is less than the @len passed in. Implementations really
should be returning a negative errno in this case, because that's what
btrfs (which introduced FICLONE{,RANGE}) did.
Therefore, ->remap_range implementations cannot silently drop an errno
that they might have when the number of bytes remapped is less than the
number of bytes requested and CAN_SHORTEN is not set.
Found by running generic/562 on a 64k fsblock filesystem and wondering
why it reported corrupt files.
Cc: <stable@vger.kernel.org> # v4.20
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Really-Fixes: 3f68c1f562 ("xfs: support returning partial reflink results")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
With the nrext64 feature enabled, it's possible for a data fork to have
2^48 extent mappings. Even with a 64k fsblock size, that maps out to
a bmbt containing more than 2^32 blocks. Therefore, this predicate must
return a u64 count to avoid an integer wraparound that will cause scrub
to do the wrong thing.
It's unlikely that any such filesystem currently exists, because the
incore bmbt would consume more than 64GB of kernel memory on its own,
and so far nobody except me has driven a filesystem that far, judging
from the lack of complaints.
Cc: <stable@vger.kernel.org> # v5.19
Fixes: df9ad5cc7a ("xfs: Introduce macros to represent new maximum extent counts for data/attr forks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the same vein as the previous patch, there's no point in the metapath
scrub setup function doing a lookup on the quota metadir just so it can
validate that lookups work correctly. Instead, retain the quota
directory inode in memory for the lifetime of the mount so that we can
check this meaningfully.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 128a055291 ("xfs: scrub quota file metapaths")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't waste time in xchk_setup_metapath_dqinode doing a second lookup of
the quota inodes, just grab them from the quotainfo structure. The
whole point of this scrubber is to make sure that the dirents exist, so
it's completely silly to do lookups.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: 128a055291 ("xfs: scrub quota file metapaths")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit ca6448aed4, we created an "end_daddr" variable to fix
fsmap reporting when the end of the range requested falls in the middle
of an unknown (aka free on the rmapbt) region. Unfortunately, I didn't
notice that the the code sets end_daddr to the last sector of the device
but then uses that quantity to compute the length of the synthesized
mapping.
Zizhi Wo later observed that when end_daddr isn't set, we still don't
report the last fsblock on a device because in that case (aka when
info->last is true), the info->high mapping that we pass to
xfs_getfsmap_group_helper has a startblock that points to the last
fsblock. This is also wrong because the code uses startblock to
compute the length of the synthesized mapping.
Fix the second problem by setting end_daddr unconditionally, and fix the
first problem by setting start_daddr to one past the end of the range to
query.
Cc: <stable@vger.kernel.org> # v6.11
Fixes: ca6448aed4 ("xfs: Fix missing interval for missing_owner in xfs fsmap")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reported-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=+OkY
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix ctime setting in setattr
- fix reference count on user session to avoid potential race with
session expire
- fix query dir issue
* tag 'v6.13-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: set ATTR_CTIME flags when setting mtime
ksmbd: fix racy issue from session lookup and expire
ksmbd: retry iterate_dir in smb2_query_dir
A set of random fixes for this cycle.
perf record
-----------
* Fix build-id event size calculation in perf record
* Fix perf record -C/--cpu option on hybrid systems
* Fix perf mem record with precise-ip on SapphireRapids
perf test
---------
* Refresh hwmon directory before reading the test files
* Make sure system_tsc_freq event is tested on x86 only
Others
------
* Usual header file sync
* Fix undefined behavior in perf ftrace profile
* Properly initialize a return variable in perf probe
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ1taMgAKCRCMstVUGiXM
g+JLAP99JamxAdmiXW9qwU7Z2OGWZ+J5RsVh5sId+XuH5Lui1wEAgxE5vhULfRaz
IH74FuxietYfo0YpTLVlJJgntHO7ugo=
=YUUe
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.13-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A set of random fixes for this cycle.
perf record:
- Fix build-id event size calculation in perf record
- Fix perf record -C/--cpu option on hybrid systems
- Fix perf mem record with precise-ip on SapphireRapids
perf test:
- Refresh hwmon directory before reading the test files
- Make sure system_tsc_freq event is tested on x86 only
Others:
- Usual header file sync
- Fix undefined behavior in perf ftrace profile
- Properly initialize a return variable in perf probe"
* tag 'perf-tools-fixes-for-v6.13-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf probe: Fix uninitialized variable
libperf: evlist: Fix --cpu argument on hybrid platform
perf test expr: Fix system_tsc_freq for only x86
perf test hwmon_pmu: Fix event file location
perf hwmon_pmu: Use openat rather than dup to refresh directory
perf ftrace: Fix undefined behavior in cmp_profile_data()
perf tools: Fix precise_ip fallback logic
perf tools: Fix build error on generated/fs_at_flags_array.c
tools headers: Sync uapi/linux/prctl.h with the kernel sources
tools headers: Sync uapi/linux/mount.h with the kernel sources
tools headers: Sync uapi/linux/fcntl.h with the kernel sources
tools headers: Sync uapi/asm-generic/mman.h with the kernel sources
tools headers: Sync *xattrat syscall changes with the kernel sources
tools headers: Sync arm64 kvm header with the kernel sources
tools headers: Sync x86 kvm and cpufeature headers with the kernel
tools headers: Sync uapi/linux/kvm.h with the kernel sources
tools headers: Sync uapi/linux/perf_event.h with the kernel sources
tools headers: Sync uapi/drm/drm.h with the kernel sources
perf machine: Initialize machine->env to address a segfault
perf test: Don't signal all processes on system when interrupting tests
...
A few fixes. One is just a formatting change but I figure I will include
it here to avoid unnessesary pull requests in the future. If you prefer
not to merge it now I can leave it out.
- Fix from Masahiro Yamada to fix 6.13 OpenRISC boot issues after
vmlinux.lds.h symbol ordering was changed.
- Code formatting fixups from Geert.
-----BEGIN PGP SIGNATURE-----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=rh6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
- Fix from Masahiro Yamada to fix 6.13 OpenRISC boot issues after
vmlinux.lds.h symbol ordering was changed
- Code formatting fixups from Geert
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Fix misalignments in head.S
openrisc: place exception table at the head of vmlinux
Kumar Kartikeya Dwivedi says:
====================
Add missing size check for BTF-based ctx access
This set fixes a issue reported for tracing and struct ops programs
using btf_ctx_access for ctx checks, where loading a pointer argument
from the ctx doesn't enforce a BPF_DW access size check. The original
report is at link [0]. Also add a regression test along with the fix.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
====================
Link: https://patch.msgid.link/20241212092050.3204165-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that performing narrow ctx loads other than size == 8 are
rejected when the argument is a pointer type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_prog_aux->func field might be NULL if program does not have
subprograms except for main sub-program. The fixed commit does
bpf_prog_aux->func access unconditionally, which might lead to null
pointer dereference.
The bug could be triggered by replacing the following BPF program:
SEC("tc")
int main_changes(struct __sk_buff *sk)
{
bpf_skb_pull_data(sk, 0);
return 0;
}
With the following BPF program:
SEC("freplace")
long changes_pkt_data(struct __sk_buff *sk)
{
return bpf_skb_pull_data(sk, 0);
}
bpf_prog_aux instance itself represents the main sub-program,
use this property to fix the bug.
Fixes: 81f6d0530b ("bpf: check changes_pkt_data property for extension programs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412111822.qGw6tOyB-lkp@intel.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth: stmmac: fix TSO DMA API mis-usage causing oops
- eth: bnxt_en: fixes for HW GRO: GSO type on 5750X chips and
oops due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply
not supported
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TDKt
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
After a recent change to clamp() and its variants [1] that increases the
coverage of the check that high is greater than low because it can be
done through inlining, certain build configurations (such as s390
defconfig) fail to build with clang with:
block/blk-iocost.c:1101:11: error: call to '__compiletime_assert_557' declared with 'error' attribute: clamp() low limit 1 greater than high limit active
1101 | inuse = clamp_t(u32, inuse, 1, active);
| ^
include/linux/minmax.h:218:36: note: expanded from macro 'clamp_t'
218 | #define clamp_t(type, val, lo, hi) __careful_clamp(type, val, lo, hi)
| ^
include/linux/minmax.h:195:2: note: expanded from macro '__careful_clamp'
195 | __clamp_once(type, val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
| ^
include/linux/minmax.h:188:2: note: expanded from macro '__clamp_once'
188 | BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
| ^
__propagate_weights() is called with an active value of zero in
ioc_check_iocgs(), which results in the high value being less than the
low value, which is undefined because the value returned depends on the
order of the comparisons.
The purpose of this expression is to ensure inuse is not more than
active and at least 1. This could be written more simply with a ternary
expression that uses min(inuse, active) as the condition so that the
value of that condition can be used if it is not zero and one if it is.
Do this conversion to resolve the error and add a comment to deter
people from turning this back into clamp().
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Link: https://lore.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com/ [1]
Suggested-by: David Laight <david.laight@aculab.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/llvm/CA+G9fYsD7mw13wredcZn0L-KBA3yeoVSTuxnss-AEWMN3ha0cA@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120322.3GfVe3vF-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unify the common parts of erofs_fc_free() and erofs_kill_sb() as
erofs_sb_free().
Thus, fput() in erofs_fc_get_tree() is no longer needed, too.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212133504.2047178-1-hsiangkao@linux.alibaba.com
- Use raw_smp_processor_id() when balancing traffic for NVIDIA's custom
command queue implementation.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmdaJS8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBkkB/97jVNBdS6nZ+LYZ8Tt7hGLnoO5Wo9BPcxA
lKfqrHz/WanPrRobiF4M5UNN01ITnjcWeVsjxWqox8liE9AwXftbpbnP6qQ6bEgI
ZpUNcAhF/CBRcAmJpCwHfoDvpOg5dm9PmuUEhAitD4R3w+I0Yygdm+fLmrsrG7/e
fx6M52b1J++BK7MXAUAijIi1TG5yVVuHIku+HkOdMurSAwxiH9Shwtib1RK8w/63
O2DVjJNfbM35xXFduIPSzbOqTComC/j1dd3mvbdCsumPKr3UzSbkWMZ3q3OiwOyU
BNVXpvx1ymjv3iI7kFuEW1v1ykUiimZhzbdAKaT3Dyp46fkhX1pu
=7lXv
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
Arm SMMU fixes for 6.13-rc
- Use raw_smp_processor_id() when balancing traffic for NVIDIA's custom
command queue implementation.
The current email address is no longer valid, use my gmail instead.
Signed-off-by: Yue Hu <zbestahu@gmail.com>
Acked-by: Gao Xiang <xiang@kernel.org>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20241211080918.8512-1-zbestahu@163.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
There may still exist some pcluster with valid reference counts
during unmounting. Instead of introducing another synchronization
primitive, just try again as unmounting is relatively rare. This
approach is similar to z_erofs_cache_invalidate_folio().
It was also reported by syzbot as a UAF due to commit f5ad9f9a60
("erofs: free pclusters if no cached folio is attached"):
BUG: KASAN: slab-use-after-free in do_raw_spin_trylock+0x72/0x1f0 kernel/locking/spinlock_debug.c:123
..
queued_spin_trylock include/asm-generic/qspinlock.h:92 [inline]
do_raw_spin_trylock+0x72/0x1f0 kernel/locking/spinlock_debug.c:123
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x20/0x80 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:361 [inline]
z_erofs_put_pcluster fs/erofs/zdata.c:959 [inline]
z_erofs_decompress_pcluster fs/erofs/zdata.c:1403 [inline]
z_erofs_decompress_queue+0x3798/0x3ef0 fs/erofs/zdata.c:1425
z_erofs_decompressqueue_work+0x99/0xe0 fs/erofs/zdata.c:1437
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa68/0x1840 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
However, it seems a long outstanding memory leak. Fix it now.
Fixes: f5ad9f9a60 ("erofs: free pclusters if no cached folio is attached")
Reported-by: syzbot+7ff87b095e7ca0c5ac39@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/674c1235.050a0220.ad585.0032.GAE@google.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241203072821.1885740-1-hsiangkao@linux.alibaba.com
The arm64 stacktrace code has a few error conditions where a
WARN_ON_ONCE() is triggered before the stacktrace is terminated and an
error is returned to the caller. The conditions shouldn't be triggered
when unwinding the current task, but it is possible to trigger these
when unwinding another task which is not blocked, as the stack of that
task is concurrently modified. Kent reports that these warnings can be
triggered while running filesystem tests on bcachefs, which calls the
stacktrace code directly.
To produce a meaningful stacktrace of another task, the task in question
should be blocked, but the stacktrace code is expected to be robust to
cases where it is not blocked. Note that this is purely about not
unuduly scaring the user and/or crashing the kernel; stacktraces in such
cases are meaningless and may leak kernel secrets from the stack of the
task being unwound.
Ideally we'd pin the task in a blocked state during the unwind, as we do
for /proc/${PID}/wchan since commit:
42a20f86dc ("sched: Add wrapper for get_wchan() to keep task blocked")
... but a bunch of places don't do that, notably /proc/${PID}/stack,
where we don't pin the task in a blocked state, but do restrict the
output to privileged users since commit:
f8a00cef17 ("proc: restrict kernel stack dumps to root")
... and so it's possible to trigger these warnings accidentally, e.g. by
reading /proc/*/stack (as root):
| for n in $(seq 1 10); do
| while true; do cat /proc/*/stack > /dev/null 2>&1; done &
| done
| ------------[ cut here ]------------
| WARNING: CPU: 3 PID: 166 at arch/arm64/kernel/stacktrace.c:207 arch_stack_walk+0x1c8/0x370
| Modules linked in:
| CPU: 3 UID: 0 PID: 166 Comm: cat Not tainted 6.13.0-rc2-00003-g3dafa7a7925d #2
| Hardware name: linux,dummy-virt (DT)
| pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : arch_stack_walk+0x1c8/0x370
| lr : arch_stack_walk+0x1b0/0x370
| sp : ffff800080773890
| x29: ffff800080773930 x28: fff0000005c44500 x27: fff00000058fa038
| x26: 000000007ffff000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffffa35a8d9600ec x22: 0000000000000000 x21: fff00000043a33c0
| x20: ffff800080773970 x19: ffffa35a8d960168 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : ffff8000807738e0 x7 : ffff8000806e3800 x6 : ffff8000806e3818
| x5 : ffff800080773920 x4 : ffff8000806e4000 x3 : ffff8000807738e0
| x2 : 0000000000000018 x1 : ffff8000806e3800 x0 : 0000000000000000
| Call trace:
| arch_stack_walk+0x1c8/0x370 (P)
| stack_trace_save_tsk+0x8c/0x108
| proc_pid_stack+0xb0/0x134
| proc_single_show+0x60/0x120
| seq_read_iter+0x104/0x438
| seq_read+0xf8/0x140
| vfs_read+0xc4/0x31c
| ksys_read+0x70/0x108
| __arm64_sys_read+0x1c/0x28
| invoke_syscall+0x48/0x104
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x30/0xcc
| el0t_64_sync_handler+0x10c/0x138
| el0t_64_sync+0x198/0x19c
| ---[ end trace 0000000000000000 ]---
Fix this by only warning when unwinding the current task. When unwinding
another task the error conditions will be handled by returning an error
without producing a warning.
The two warnings in kunwind_next_frame_record_meta() were added recently
as part of commit:
c2c6b27b5a ("arm64: stacktrace: unwind exception boundaries")
The warning when recovering the fgraph return address has changed form
many times, but was originally introduced back in commit:
9f416319f4 ("arm64: fix unwind_frame() for filtered out fn for function graph tracing")
Fixes: c2c6b27b5a ("arm64: stacktrace: unwind exception boundaries")
Fixes: 9f416319f4 ("arm64: fix unwind_frame() for filtered out fn for function graph tracing")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241211140704.2498712-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Aishwarya reports that warnings are sometimes seen when running the
ftrace kselftests, e.g.
| WARNING: CPU: 5 PID: 2066 at arch/arm64/kernel/stacktrace.c:141 arch_stack_walk+0x4a0/0x4c0
| Modules linked in:
| CPU: 5 UID: 0 PID: 2066 Comm: ftracetest Not tainted 6.13.0-rc2 #2
| Hardware name: linux,dummy-virt (DT)
| pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : arch_stack_walk+0x4a0/0x4c0
| lr : arch_stack_walk+0x248/0x4c0
| sp : ffff800083643d20
| x29: ffff800083643dd0 x28: ffff00007b891400 x27: ffff00007b891928
| x26: 0000000000000001 x25: 00000000000000c0 x24: ffff800082f39d80
| x23: ffff80008003ee8c x22: ffff80008004baa8 x21: ffff8000800533e0
| x20: ffff800083643e10 x19: ffff80008003eec8 x18: 0000000000000000
| x17: 0000000000000000 x16: ffff800083640000 x15: 0000000000000000
| x14: 02a37a802bbb8a92 x13: 00000000000001a9 x12: 0000000000000001
| x11: ffff800082ffad60 x10: ffff800083643d20 x9 : ffff80008003eed0
| x8 : ffff80008004baa8 x7 : ffff800086f2be80 x6 : ffff0000057cf000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800086f2b690
| x2 : ffff80008004baa8 x1 : ffff80008004baa8 x0 : ffff80008004baa8
| Call trace:
| arch_stack_walk+0x4a0/0x4c0 (P)
| arch_stack_walk+0x248/0x4c0 (L)
| profile_pc+0x44/0x80
| profile_tick+0x50/0x80 (F)
| tick_nohz_handler+0xcc/0x160 (F)
| __hrtimer_run_queues+0x2ac/0x340 (F)
| hrtimer_interrupt+0xf4/0x268 (F)
| arch_timer_handler_virt+0x34/0x60 (F)
| handle_percpu_devid_irq+0x88/0x220 (F)
| generic_handle_domain_irq+0x34/0x60 (F)
| gic_handle_irq+0x54/0x140 (F)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0x98
| el1_interrupt+0x34/0x68 (F)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x6c/0x70
| queued_spin_lock_slowpath+0x78/0x460 (P)
The warning in question is:
WARN_ON_ONCE(state->common.pc == orig_pc))
... in kunwind_recover_return_address(), which is triggered when
return_to_handler() is encountered in the trace, but
ftrace_graph_ret_addr() cannot find a corresponding original return
address on the fgraph return stack.
This happens because the stacktrace code encounters an exception
boundary where the LR was not live at the time of the exception, but the
LR happens to contain return_to_handler(); either because the task
recently returned there, or due to unfortunate usage of the LR at a
scratch register. In such cases attempts to recover the return address
via ftrace_graph_ret_addr() may fail, triggering the WARN_ON_ONCE()
above and aborting the unwind (hence the stacktrace terminating after
reporting the PC at the time of the exception).
Handling unreliable LR values in these cases is likely to require some
larger rework, so for the moment avoid this problem by restoring the old
behaviour of skipping the LR at exception boundaries, which the
stacktrace code did prior to commit:
c2c6b27b5a ("arm64: stacktrace: unwind exception boundaries")
This commit is effectively a partial revert, keeping the structures and
logic to explicitly identify exception boundaries while still skipping
reporting of the LR. The logic to explicitly identify exception
boundaries is still useful for general robustness and as a building
block for future support for RELIABLE_STACKTRACE.
Fixes: c2c6b27b5a ("arm64: stacktrace: unwind exception boundaries")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241211140704.2498712-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
That pool implementation doesn't really work: if the krealloc happens to
move the memory and return another address, the entries in the xarray
become invalid, leading to use-after-free later:
BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe]
Read of size 4 at addr ffff8881244b2590 by task modprobe/2753
Allocated by task 2753:
kasan_save_stack+0x39/0x70
kasan_save_track+0x14/0x40
kasan_save_alloc_info+0x37/0x60
__kasan_kmalloc+0xc3/0xd0
__kmalloc_node_track_caller_noprof+0x200/0x6d0
krealloc_noprof+0x229/0x380
Simplify the code to fix the bug. A better pooling strategy may be added
back later if needed.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209232739.147417-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Invalidation_fence_init takes a PM reference, which is released in its
_fini counterpart, so we need to make sure that the latter is called,
even if the fence is in an error state.
Since we already have a function that calls _fini() and signals the
fence in the tlb inval code, we can expose that and call it from the PT
code.
Fixes: f002702290 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.11+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206015022.1567113-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 65338639b79ce88aef5263cd518cde570a3c7c8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Make bio_iov_bvec_set() accept a pointer to const iov_iter, which means
that we can drop the undesirable casting to struct iov_iter pointer in
blk_rq_map_user_bvec().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241202115727.2320401-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
-----BEGIN PGP SIGNATURE-----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=1Po/
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit changed the dsa_8021q_rcv() calling convention to
accept pre-populated source_port and switch_id arguments. If those are
not available, as in the case of tag_ocelot_8021q, the arguments must be
pre-initialized with -1.
Due to the bug of passing uninitialized arguments in tag_ocelot_8021q,
dsa_8021q_rcv() does not detect that it needs to populate the
source_port and switch_id, and this makes dsa_conduit_find_user() fail,
which leads to packet loss on reception.
Fixes: dcfe767378 ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()")
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8d7ae22ae9 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.
The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9896 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Fixes: 5c844d57aa ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If cloning of buffers fail and we have to put the ones already grabbed,
check for NULL buffers and skip those. They used to be dummy ubufs, but
now they are just NULL and that should be checked before reaping them.
Reported-by: chase xd <sl1589472800@gmail.com>
Link: https://lore.kernel.org/io-uring/CADZouDQ7TcKn8gz8_efnyAEp1JvU1ktRk8PWz-tO0FXUoh8VGQ@mail.gmail.com/
Fixes: d50f94d761 ("io_uring/rsrc: get rid of the empty node and dummy_ubuf")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.
Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
