mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-10 07:10:27 +00:00
1901 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nathan Chancellor
|
aaeed6ecc1 |
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
There are two outstanding issues with CONFIG_X86_X32_ABI and llvm-objcopy, with similar root causes: 1. llvm-objcopy does not properly convert .note.gnu.property when going from x86_64 to x86_x32, resulting in a corrupted section when linking: https://github.com/ClangBuiltLinux/linux/issues/1141 2. llvm-objcopy produces corrupted compressed debug sections when going from x86_64 to x86_x32, also resulting in an error when linking: https://github.com/ClangBuiltLinux/linux/issues/514 After commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the .note.gnu.property section is always generated when CONFIG_X86_KERNEL_IBT is enabled, which causes the first issue to become visible with an allmodconfig build: ld.lld: error: arch/x86/entry/vdso/vclock_gettime-x32.o:(.note.gnu.property+0x1c): program property is too short To avoid this error, do not allow CONFIG_X86_X32_ABI to be selected when using llvm-objcopy. If the two issues ever get fixed in llvm-objcopy, this can be turned into a feature check. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220314194842.3452-3-nathan@kernel.org |
||
|
Masahiro Yamada
|
83a44a4f47 |
x86: Remove toolchain check for X32 ABI capability
Commit 0bf6276392e9 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.
Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.
[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
|
||
|
Peter Zijlstra
|
ed53a0d971 |
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
Objtool's --ibt option generates .ibt_endbr_seal which lists superfluous ENDBR instructions. That is those instructions for which the function is never indirectly called. Overwrite these ENDBR instructions with a NOP4 such that these function can never be indirect called, reducing the number of viable ENDBR targets in the kernel. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org |
||
|
Peter Zijlstra
|
156ff4a544 |
x86/ibt: Base IBT bits
Add Kconfig, Makefile and basic instruction support for x86 IBT. (Ab)use __DISABLE_EXPORTS to disable IBT since it's already employed to mark compressed and purgatory. Additionally mark realmode with it as well to avoid inserting ENDBR instructions there. While ENDBR is technically a NOP, inserting them was causing some grief due to code growth. There's also a problem with using __noendbr in code compiled without -fcf-protection=branch. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154317.519875203@infradead.org |
||
|
Michal Suchanek
|
8b766b0f8e |
sysfb: Enable boot time VESA graphic mode selection
Since switch to simplefb/simpledrm VESA graphic mode selection with vga=
kernel parameter is no longer available with legacy BIOS.
The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.
This option is selected by vesafb but not simplefb/simpledrm.
To enable use of VESA modes with simplefb in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select
the option from sysfb rather than the drivers that depend on it.
The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86
platform, move it from fbdev to x86 Kconfig.
Fixes: e3263ab389a7 ("x86: provide platform-devices for boot-framebuffers")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de
|
||
|
Oleg Nesterov
|
bf9ad37dc8 |
signal, x86: Delay calling signals in atomic on RT enabled kernels
On x86_64 we must disable preemption before we enable interrupts for stack faults, int3 and debugging, because the current task is using a per CPU debug stack defined by the IST. If we schedule out, another task can come in and use the same stack and cause the stack to be corrupted and crash the kernel on return. When CONFIG_PREEMPT_RT is enabled, spinlock_t locks become sleeping, and one of these is the spin lock used in signal handling. Some of the debug code (int3) causes do_trap() to send a signal. This function calls a spinlock_t lock that has been converted to a sleeping lock. If this happens, the above issues with the corrupted stack is possible. Instead of calling the signal right away, for PREEMPT_RT and x86, the signal information is stored on the stacks task_struct and TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume code will send the signal when preemption is enabled. [ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT to ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ] [bigeasy: Add on 32bit as per Yang Shi, minor rewording. ] [ tglx: Use a config option ] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/Ygq5aBB/qMQw6aP5@linutronix.de |
||
|
Song Liu
|
eed1fcee55 |
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
kernel test robot reported kernel BUG like:
[ 44.587744][ T1] kernel BUG at arch/x86/mm/physaddr.c:76!
[ 44.590151][ T1] __vmalloc_area_node (mm/vmalloc.c:622 mm/vmalloc.c:2995)
[ 44.590151][ T1] __vmalloc_node_range (mm/vmalloc.c:3108)
[ 44.590151][ T1] __vmalloc_node (mm/vmalloc.c:3157)
which is triggered with HAVE_ARCH_HUGE_VMALLOC on 32-bit x86. Since BPF
only uses HAVE_ARCH_HUGE_VMALLOC for x86_64, turn it off for 32-bit x86.
Fixes: fac54e2bfb5b ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220302175126.247459-2-song@kernel.org
|
||
|
Mateusz Jończyk
|
a7a6f65a39 |
x86/Kconfig: move and modify CONFIG_I8K
In Kconfig, inside the "Processor type and features" menu, there is
the CONFIG_I8K option: "Dell i8k legacy laptop support". This is
very confusing - enabling CONFIG_I8K is not required for the kernel to
support old Dell laptops. This option is specific to the dell-smm-hwmon
driver, which mostly exports some hardware monitoring information and
allows the user to change fan speed.
This option is misplaced, so move CONFIG_I8K to drivers/hwmon/Kconfig,
where it belongs.
Also, modify the dependency order - change
select SENSORS_DELL_SMM
to
depends on SENSORS_DELL_SMM
as it is just a configuration option of dell-smm-hwmon. This includes
changing the option type from tristate to bool. It was tristate because
it could select CONFIG_SENSORS_DELL_SMM=m .
When running "make oldconfig" on configurations with
CONFIG_SENSORS_DELL_SMM enabled , this change will result in an
additional question (which could be printed several times during
bisecting). I think that tidying up the configuration is worth it,
though.
Next patch tweaks the description of CONFIG_I8K.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Pali Rohár <pali@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220212125654.357408-1-mat.jonczyk@o2.pl
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
||
|
Kees Cook
|
2792d84e6d |
usercopy: Check valid lifetime via stack depth
One of the things that CONFIG_HARDENED_USERCOPY sanity-checks is whether an object that is about to be copied to/from userspace is overlapping the stack at all. If it is, it performs a number of inexpensive bounds checks. One of the finer-grained checks is whether an object crosses stack frames within the stack region. Doing this on x86 with CONFIG_FRAME_POINTER was cheap/easy. Doing it with ORC was deemed too heavy, and was left out (a while ago), leaving the courser whole-stack check. The LKDTM tests USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM try to exercise these cross-frame cases to validate the defense is working. They have been failing ever since ORC was added (which was expected). While Muhammad was investigating various LKDTM failures[1], he asked me for additional details on them, and I realized that when exact stack frame boundary checking is not available (i.e. everything except x86 with FRAME_POINTER), it could check if a stack object is at least "current depth valid", in the sense that any object within the stack region but not between start-of-stack and current_stack_pointer should be considered unavailable (i.e. its lifetime is from a call no longer present on the stack). Introduce ARCH_HAS_CURRENT_STACK_POINTER to track which architectures have actually implemented the common global register alias. Additionally report usercopy bounds checking failures with an offset from current_stack_pointer, which may assist with diagnosing failures. The LKDTM USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM tests (once slightly adjusted in a separate patch) pass again with this fixed. [1] https://github.com/kernelci/kernelci-project/issues/84 Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Kees Cook <keescook@chromium.org> --- v1: https://lore.kernel.org/lkml/20220216201449.2087956-1-keescook@chromium.org v2: https://lore.kernel.org/lkml/20220224060342.1855457-1-keescook@chromium.org v3: https://lore.kernel.org/lkml/20220225173345.3358109-1-keescook@chromium.org v4: - improve commit log (akpm) |
||
|
Ingo Molnar
|
6255b48aeb |
Linux 5.17-rc5
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV
Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ
wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9
qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8
1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t
fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg
/PuMhEg=
=eU1o
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Mark Rutland
|
99cf983cc8 |
sched/preempt: Add PREEMPT_DYNAMIC using static keys
Where an architecture selects HAVE_STATIC_CALL but not HAVE_STATIC_CALL_INLINE, each static call has an out-of-line trampoline which will either branch to a callee or return to the caller. On such architectures, a number of constraints can conspire to make those trampolines more complicated and potentially less useful than we'd like. For example: * Hardware and software control flow integrity schemes can require the addition of "landing pad" instructions (e.g. `BTI` for arm64), which will also be present at the "real" callee. * Limited branch ranges can require that trampolines generate or load an address into a register and perform an indirect branch (or at least have a slow path that does so). This loses some of the benefits of having a direct branch. * Interaction with SW CFI schemes can be complicated and fragile, e.g. requiring that we can recognise idiomatic codegen and remove indirections understand, at least until clang proves more helpful mechanisms for dealing with this. For PREEMPT_DYNAMIC, we don't need the full power of static calls, as we really only need to enable/disable specific preemption functions. We can achieve the same effect without a number of the pain points above by using static keys to fold early returns into the preemption functions themselves rather than in an out-of-line trampoline, effectively inlining the trampoline into the start of the function. For arm64, this results in good code generation. For example, the dynamic_cond_resched() wrapper looks as follows when enabled. When disabled, the first `B` is replaced with a `NOP`, resulting in an early return. | <dynamic_cond_resched>: | bti c | b <dynamic_cond_resched+0x10> // or `nop` | mov w0, #0x0 | ret | mrs x0, sp_el0 | ldr x0, [x0, #8] | cbnz x0, <dynamic_cond_resched+0x8> | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret ... compared to the regular form of the function: | <__cond_resched>: | bti c | mrs x0, sp_el0 | ldr x1, [x0, #8] | cbz x1, <__cond_resched+0x18> | mov w0, #0x0 | ret | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret Any architecture which implements static keys should be able to use this to implement PREEMPT_DYNAMIC with similar cost to non-inlined static calls. Since this is likely to have greater overhead than (inlined) static calls, PREEMPT_DYNAMIC is only defaulted to enabled when HAVE_PREEMPT_DYNAMIC_CALL is selected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220214165216.2231574-6-mark.rutland@arm.com |
||
|
Jakub Kicinski
|
1127170d45 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Song Liu
|
fac54e2bfb |
x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP
This enables module_alloc() to allocate huge page for 2MB+ requests. To check the difference of this change, we need enable config CONFIG_PTDUMP_DEBUGFS, and call module_alloc(2MB). Before the change, /sys/kernel/debug/page_tables/kernel shows pte for this map. With the change, /sys/kernel/debug/page_tables/ show pmd for thie map. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220204185742.271030-2-song@kernel.org |
||
|
Steven Rostedt (Google)
|
4ed308c445 |
ftrace: Have architectures opt-in for mcount build time sorting
First S390 complained that the sorting of the mcount sections at build time caused the kernel to crash on their architecture. Now PowerPC is complaining about it too. And also ARM64 appears to be having issues. It may be necessary to also update the relocation table for the values in the mcount table. Not only do we have to sort the table, but also update the relocations that may be applied to the items in the table. If the system is not relocatable, then it is fine to sort, but if it is, some architectures may have issues (although x86 does not as it shifts all addresses the same). Add a HAVE_BUILDTIME_MCOUNT_SORT that an architecture can set to say it is safe to do the sorting at build time. Also update the config to compile in build time sorting in the sorttable code in scripts/ to depend on CONFIG_BUILDTIME_MCOUNT_SORT. Link: https://lore.kernel.org/all/944D10DA-8200-4BA9-8D0A-3BED9AA99F82@linux.ibm.com/ Link: https://lkml.kernel.org/r/20220127153821.3bc1ac6e@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Yinan Liu <yinan@linux.alibaba.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Tested-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
David Hildenbrand
|
4eda2bc343 |
x86/Kconfig: Select ARCH_SELECT_MEMORY_MODEL only if FLATMEM and SPARSEMEM are possible
x86-64 supports only CONFIG_SPARSEMEM; there is nothing users can select. So enable the memory model selection (via CONFIG_ARCH_SELECT_MEMORY_MODEL) only if both, SPARSEMEM and FLATMEM are possible, which isn't the case on x86-64. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20210929144321.50411-1-david@redhat.com |
||
|
Linus Torvalds
|
3689f9f8b0 |
bitmap patches for 5.17-rc1
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
|
||
|
Linus Torvalds
|
f4484d138b |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ... |
||
|
Marco Elver
|
bece04b5b4 |
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
Until recent versions of GCC and Clang, it was not possible to disable
KCOV instrumentation via a function attribute. The relevant function
attribute was introduced in 540540d06e9d9 ("kcov: add
__no_sanitize_coverage to fix noinstr for all architectures").
x86 was the first architecture to want a working noinstr, and at the
time no compiler support for the attribute existed yet. Therefore,
commit 0f1441b44e823 ("objtool: Fix noinstr vs KCOV") introduced the
ability to NOP __sanitizer_cov_*() calls in .noinstr.text.
However, this doesn't work for other architectures like arm64 and s390
that want a working noinstr per ARCH_WANTS_NO_INSTR.
At the time of 0f1441b44e823, we didn't yet have ARCH_WANTS_NO_INSTR,
but now we can move the Kconfig dependency checks to the generic KCOV
option. KCOV will be available if:
- architecture does not care about noinstr, OR
- we have objtool support (like on x86), OR
- GCC is 12.0 or newer, OR
- Clang is 13.0 or newer.
Link: https://lkml.kernel.org/r/20211201152604.3984495-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kefeng Wang
|
7ecd19cfdf |
mm: percpu: generalize percpu related config
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page: NEED_PER_CPU_EMBED_FIRST_CHUNK
embed page
------------------------
arm64 Y Y
mips Y N
powerpc Y Y
riscv Y N
sparc Y Y
x86 Y Y
------------------------
There are two interfaces about percpu first chunk allocator,
extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
extern int __init pcpu_page_first_chunk(size_t reserved_size,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn,
- pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
[1] https://github.com/kevin78/linux.git percpu-cleanup
This patch (of 4):
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
||
|
Yury Norov
|
c126a53c27 |
arch: remove GENERIC_FIND_FIRST_BIT entirely
In 5.12 cycle we enabled GENERIC_FIND_FIRST_BIT config option for ARM64 and MIPS. It increased performance and shrunk .text size; and so far I didn't receive any negative feedback on the change. https://lore.kernel.org/linux-arch/20210225135700.1381396-1-yury.norov@gmail.com/ Now I think it's a good time to switch all architectures to use find_{first,last}_bit() unconditionally, and so remove corresponding config option. The patch does't introduce functioal changes for arc, arm, arm64, mips, m68k, s390 and x86, for other architectures I expect improvement both in performance and .text size. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Pasha Tatashin
|
d283d422c6 |
x86: mm: add x86_64 support for page table check
Add page table check hooks into routines that modify user page tables. Link: https://lkml.kernel.org/r/20211221154650.1047963-5-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Xu <weixugc@google.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
64ad946152 |
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and LIVEPATCH as the backtrace misses the function which is being fixed up. - Add Straight Light Speculation mitigation support which uses a new compiler switch -mharden-sls= which sticks an INT3 after a RET or an indirect branch in order to block speculation after them. Reportedly, CPUs do speculate behind such insns. - The usual set of cleanups and improvements -----BEGIN PGP SIGNATURE----- iQIyBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHfKA0ACgkQEsHwGGHe VUqLJg/2I2X2xXr5filJVaK+sQgmvDzk67DKnbxRBW2xcPF+B5sSW5yhe3G5UPW7 SJVdhQ3gHcTiliGGlBf/VE7KXbqxFN0vO4/VFHZm78r43g7OrXTxz6WXXQRJ1n67 U3YwRH3b6cqXZNFMs+X4bJt6qsGJM1kdTTZ2as4aERnaFr5AOAfQvfKbyhxLe/XA 3SakfYISVKCBQ2RkTfpMpwmqlsatGFhTC5IrvuDQ83dDsM7O+Dx1J6Gu3fwjKmie iVzPOjCh+xTpZQp/SIZmt7MzoduZvpSym4YVyHvEnMiexQT4AmyaRthWqrhnEXY/ qOvj8/XIqxmix8EaooGqRIK0Y2ZegxkPckNFzaeC3lsWohwMIGIhNXwHNEeuhNyH yvNGAW9Cq6NeDRgz5MRUXcimYw4P4oQKYLObS1WqFZhNMqm4sNtoEAYpai/lPYfs zUDckgXF2AoPOsSqy3hFAVaGovAgzfDaJVzkt0Lk4kzzjX2WQiNLhmiior460w+K 0l2Iej58IajSp3MkWmFH368Jo8YfUVmkjbbpsmjsBppA08e1xamJB7RmswI/Ezj6 s5re6UioCD+UYdjWx41kgbvYdvIkkZ2RLrktoZd/hqHrOLWEIiwEbyFO2nRFJIAh YjvPkB1p7iNuAeYcP1x9Ft9GNYVIsUlJ+hK86wtFCqy+abV+zQ== =R52z -----END PGP SIGNATURE----- Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Get rid of all the .fixup sections because this generates misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and LIVEPATCH as the backtrace misses the function which is being fixed up. - Add Straight Line Speculation mitigation support which uses a new compiler switch -mharden-sls= which sticks an INT3 after a RET or an indirect branch in order to block speculation after them. Reportedly, CPUs do speculate behind such insns. - The usual set of cleanups and improvements * tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/entry_32: Fix segment exceptions objtool: Remove .fixup handling x86: Remove .fixup section x86/word-at-a-time: Remove .fixup usage x86/usercopy: Remove .fixup usage x86/usercopy_32: Simplify __copy_user_intel_nocache() x86/sgx: Remove .fixup usage x86/checksum_32: Remove .fixup usage x86/vmx: Remove .fixup usage x86/kvm: Remove .fixup usage x86/segment: Remove .fixup usage x86/fpu: Remove .fixup usage x86/xen: Remove .fixup usage x86/uaccess: Remove .fixup usage x86/futex: Remove .fixup usage x86/msr: Remove .fixup usage x86/extable: Extend extable functionality x86/entry_32: Remove .fixup usage x86/entry_64: Remove .fixup usage x86/copy_mc_64: Remove .fixup usage ... |
||
|
Linus Torvalds
|
bfed6efb8e |
- Add support for handling hw errors in SGX pages: poisoning, recovering
from poison memory and error injection into SGX pages - A bunch of changes to the SGX selftests to simplify and allow of SGX features testing without the need of a whole SGX software stack - Add a sysfs attribute which is supposed to show the amount of SGX memory in a NUMA node, similar to what /proc/meminfo is to normal memory - The usual bunch of fixes and cleanups too -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHcDQMACgkQEsHwGGHe VUq42xAAjWM0AFpIxgUBpbE0swV3ZMulnndl3/vA5XN+9Yn7Q52+AFyPRE0s7Zam Ap+cInh2Il7d/sv54rZ4x/j7+TH4i7s8fWPVU/XiPALQuOuw0/B1wJJ+jmMiPFiU 3jr7DkUPyWjWTHduMY/tk+xMOpkx1XsxJheYnKvsKVW+fjJ0vPuftAZtfu2z2VOh 3JLcp5cAXPxW0UK9gdoF5bCBQhBu0NRguTbhHhbByAixQO2GyVSKLSRovUdj0a+y QRrQ6hgcvpTOsVHJoWJ7yIX4SBzQTe9Bg6dT9DghOxE4Sc2GH89hu7wRztGawBJO nLyzWgiW9ttjQutDpBvZANNVcFAPAdtDWczrzZpREbrGKkzT+kOBnIIL1LWITWOy 2YWTO3ytW0KNIK85GzMjSVOKRMgaHJeBaGuYZ7Z0kb3GuUPJ9zRlaRxNapKQFuzA 0PGoA4IDT+2Afy7VYBBNUA2d/WverFQuXKusSxK6b5zJ173o5/DXL2q0d3gn/j8Z hhxJUJyVOsfRXSG4NKrj4se4FiA0n/RL4oyUZR9iJ8kWzzZTd0eZTAn468bpGIp5 yiOlPOLgsmu0xzVmAtG1+4d2+S2x+Ec5YE0sP1V/JLNciYk3Ebp7UyfnS3tn33Xc cpdWjELvD1LJVpMEURnbjRrwU6OiiAekYJCP/9lmK9zfOGpwRHc= =vFTM -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: - Add support for handling hw errors in SGX pages: poisoning, recovering from poison memory and error injection into SGX pages - A bunch of changes to the SGX selftests to simplify and allow of SGX features testing without the need of a whole SGX software stack - Add a sysfs attribute which is supposed to show the amount of SGX memory in a NUMA node, similar to what /proc/meminfo is to normal memory - The usual bunch of fixes and cleanups too * tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/sgx: Fix NULL pointer dereference on non-SGX systems selftests/sgx: Fix corrupted cpuid macro invocation x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node x86/sgx: Fix minor documentation issues selftests/sgx: Add test for multiple TCS entry selftests/sgx: Enable multiple thread support selftests/sgx: Add page permission and exception test selftests/sgx: Rename test properties in preparation for more enclave tests selftests/sgx: Provide per-op parameter structs for the test enclave selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed selftests/sgx: Move setup_test_encl() to each TEST_F() selftests/sgx: Encpsulate the test enclave creation selftests/sgx: Dump segments and /proc/self/maps only on failure selftests/sgx: Create a heap for the test enclave selftests/sgx: Make data measurement for an enclave segment optional selftests/sgx: Assign source for each segment selftests/sgx: Fix a benign linker warning x86/sgx: Add check for SGX pages to ghes_do_memory_failure() x86/sgx: Add hook to error injection address validation x86/sgx: Hook arch_memory_failure() into mainline code ... |
||
|
Linus Torvalds
|
01d5e7872c |
- Share the SEV string unrolling logic with TDX as TDX guests need it too
- Cleanups and generalzation of code shared by SEV and TDX
-----BEGIN PGP SIGNATURE-----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=9EUd
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
"The accumulated pile of x86/sev generalizations and cleanups:
- Share the SEV string unrolling logic with TDX as TDX guests need it
too
- Cleanups and generalzation of code shared by SEV and TDX"
* tag 'x86_sev_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Move common memory encryption code to mem_encrypt.c
x86/sev: Rename mem_encrypt.c to mem_encrypt_amd.c
x86/sev: Use CC_ATTR attribute to generalize string I/O unroll
x86/sev: Remove do_early_exception() forward declarations
x86/head64: Carve out the guest encryption postprocessing into a helper
x86/sev: Get rid of excessive use of defines
x86/sev: Shorten GHCB terminate macro names
|
||
|
Peter Zijlstra
|
c6dbd3e5e6 |
x86/mmx_32: Remove X86_USE_3DNOW
This code puts an exception table entry on the PREFETCH instruction to overwrite it with a JMP.d8 when it triggers an exception. Except of course, our code is no longer writable, also SMP. Instead of fixing this broken mess, simply take it out. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YZKQzUmeNuwyvZpk@hirez.programming.kicks-ass.net |
||
|
Jarkko Sakkinen
|
50468e4313 |
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
== Problem == The amount of SGX memory on a system is determined by the BIOS and it varies wildly between systems. It can be as small as dozens of MB's and as large as many GB's on servers. Just like how applications need to know how much regular RAM is available, enclave builders need to know how much SGX memory an enclave can consume. == Solution == Introduce a new sysfs file: /sys/devices/system/node/nodeX/x86/sgx_total_bytes to enumerate the amount of SGX memory available in each NUMA node. This serves the same function for SGX as /proc/meminfo or /sys/devices/system/node/nodeX/meminfo does for normal RAM. 'sgx_total_bytes' is needed today to help drive the SGX selftests. SGX-specific swap code is exercised by creating overcommitted enclaves which are larger than the physical SGX memory on the system. They currently use a CPUID-based approach which can diverge from the actual amount of SGX memory available. 'sgx_total_bytes' ensures that the selftests can work efficiently and do not attempt stupid things like creating a 100,000 MB enclave on a system with 128 MB of SGX memory. == Implementation Details == Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node: == ABI Design Discussion == As opposed to the per-node ABI, a single, global ABI was considered. However, this would prevent enclaves from being able to size themselves so that they fit on a single NUMA node. Essentially, a single value would rule out NUMA optimizations for enclaves. Create a new "x86/" directory inside each "nodeX/" sysfs directory. 'sgx_total_bytes' is expected to be the first of at least a few sgx-specific files to be placed in the new directory. Just scanning /proc/meminfo, these are the no-brainers that we have for RAM, but we need for SGX: MemTotal: xxxx kB // sgx_total_bytes (implemented here) MemFree: yyyy kB // sgx_free_bytes SwapTotal: zzzz kB // sgx_swapped_bytes So, at *least* three. I think we will eventually end up needing something more along the lines of a dozen. A new directory (as opposed to being in the nodeX/ "root") directory avoids cluttering the root with several "sgx_*" files. Place the new file in a new "nodeX/x86/" directory because SGX is highly x86-specific. It is very unlikely that any other architecture (or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/" as opposed to "x86/" was also considered. But, there is a real chance this can get used for other arch-specific purposes. [ dhansen: rewrite changelog ] Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org |
||
|
Peter Zijlstra
|
e463a09af2 |
x86: Add straight-line-speculation mitigation
Make use of an upcoming GCC feature to mitigate straight-line-speculation for x86: https://gcc.gnu.org/g:53a643f8568067d7700a9f2facc8ba39974973d3 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952 https://bugs.llvm.org/show_bug.cgi?id=52323 It's built tested on x86_64-allyesconfig using GCC-12 and GCC-11. Maintenance overhead of this should be fairly low due to objtool validation. Size overhead of all these additional int3 instructions comes to: text data bss dec hex filename 22267751 6933356 2011368 31212475 1dc43bb defconfig-build/vmlinux 22804126 6933356 1470696 31208178 1dc32f2 defconfig-build/vmlinux.sls Or roughly 2.4% additional text. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211204134908.140103474@infradead.org |
||
|
Kirill A. Shutemov
|
20f07a044a |
x86/sev: Move common memory encryption code to mem_encrypt.c
SEV and TDX both protect guest memory from host accesses. They both use guest physical address bits to communicate to the hardware which pages receive protection or not. SEV and TDX both assume that all I/O (real devices and virtio) must be performed to pages *without* protection. To add this support, AMD SEV code forces force_dma_unencrypted() to decrypt DMA pages when DMA pages were allocated for I/O. It also uses swiotlb_update_mem_attributes() to update decryption bits in SWIOTLB DMA buffers. Since TDX also uses a similar memory sharing design, all the above mentioned changes can be reused. So move force_dma_unencrypted(), SWIOTLB update code and virtio changes out of mem_encrypt_amd.c to mem_encrypt.c. Introduce a new config option X86_MEM_ENCRYPT that can be selected by platforms which use x86 memory encryption features (needed in both AMD SEV and Intel TDX guest platforms). Since the code is moved from mem_encrypt_amd.c, inherit the same make flags. This is preparation for enabling TDX memory encryption support and it has no functional changes. Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20211206135505.75045-4-kirill.shutemov@linux.intel.com |
||
|
Linus Torvalds
|
55a677b256 |
EFI fix for v5.16
Ensure that the EFI memory map resides in encrypted memory even after it has been reallocated. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmGt9nUACgkQw08iOZLZ jyT6ZgwAt1jkqt/ILev5MPE2rEQ8BrYhR7pMBcNW7su4BECwRfmQBGjYFeeXjlqp 7tK2L18DsHJxgt699gumDD7IyjbLNUx9zqsd7nJzlvnpwjGSiUhAGLPwoAeRSEgD sxK/HIt6J5ZX/zMsEbtptP9M1eitbZQhtt+0aCLcJvt1NCZc/+FvUaEEPI+6BrMt TMWdXd6MOZ8FV2iq+FUpTeG9SGzze6QaIiL7H5Z/otvXbBG1iWmlWR0bR17CXGUC thIuqCjEKSM7P45kFF+byCq5ajo55ULy3ZrPVQUYLt/FdMdI+pLxK8TTg46xq8KS mXqexjtCPLiJP728lWTETIPB7x9aQW/i6cwesh0O6cmhPznJybW/+uR9zBsyiSGs 8+9ua+JT9+B3bEn1rsbWYKEcy3G4KrxwtJ5aqRNVJM96pel/yxA4EYkmfyf4TlrS pxbY2Agzlci18qCHb5lycc1yM6WHdirzY1l0m8uwqk7o8GHtRMMMU/7e/kvmtxUA j9V3vqm6 =mDRi -----END PGP SIGNATURE----- Merge tag 'efi-urgent-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: "Ensure that the EFI memory map resides in encrypted memory even after it has been reallocated" * tag 'efi-urgent-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/sme: Explicitly map new EFI memmap table as encrypted |
||
|
Tom Lendacky
|
1ff2fc0286 |
x86/sme: Explicitly map new EFI memmap table as encrypted
Reserving memory using efi_mem_reserve() calls into the x86
efi_arch_mem_reserve() function. This function will insert a new EFI
memory descriptor into the EFI memory map representing the area of
memory to be reserved and marking it as EFI runtime memory. As part
of adding this new entry, a new EFI memory map is allocated and mapped.
The mapping is where a problem can occur. This new memory map is mapped
using early_memremap() and generally mapped encrypted, unless the new
memory for the mapping happens to come from an area of memory that is
marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will
be mapped unencrypted. However, during replacement of the old memory map,
efi_mem_type() is disabled, so the new memory map will now be long-term
mapped encrypted (in efi.memmap), resulting in the map containing invalid
data and causing the kernel boot to crash.
Since it is known that the area will be mapped encrypted going forward,
explicitly map the new memory map as encrypted using early_memremap_prot().
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 8f716c9b5feb ("x86/mm: Add support to access boot related data in the clear")
Link: https://lore.kernel.org/all/ebf1eb2940405438a09d51d121ec0d02c8755558.1634752931.git.thomas.lendacky@amd.com/
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ardb: incorporate Kconfig fix by Arnd]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
||
|
Heiko Carstens
|
503e451084 |
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes: 0b707e572a19 ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
||
|
Tony Luck
|
40e0e7843e |
x86/sgx: Add infrastructure to identify SGX EPC pages
X86 machine check architecture reports a physical address when there is a memory error. Handling that error requires a method to determine whether the physical address reported is in any of the areas reserved for EPC pages by BIOS. SGX EPC pages do not have Linux "struct page" associated with them. Keep track of the mapping from ranges of EPC pages to the sections that contain them using an xarray. N.B. adds CONFIG_XARRAY_MULTI to the SGX dependecies. So "select" that in arch/x86/Kconfig for X86/SGX. Create a function arch_is_platform_page() that simply reports whether an address is an EPC page for use elsewhere in the kernel. The ACPI error injection code needs this function and is typically built as a module, so export it. Note that arch_is_platform_page() will be slower than other similar "what type is this page" functions that can simply check bits in the "struct page". If there is some future performance critical user of this function it may need to be implemented in a more efficient way. Note also that the current implementation of xarray allocates a few hundred kilobytes for this usage on a system with 4GB of SGX EPC memory configured. This isn't ideal, but worth it for the code simplicity. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/20211026220050.697075-3-tony.luck@intel.com |
||
|
Linus Torvalds
|
0b707e572a |
s390 updates for the 5.16 merge window
- Add support for ftrace with direct call and ftrace direct call samples. - Add support for kernel command lines longer than current 896 bytes and make its length configurable. - Add support for BEAR enhancement facility to improve last breaking event instruction tracking. - Add kprobes sanity checks and testcases to prevent kprobe in the mid of an instruction. - Allow concurrent access to /dev/hwc for the CPUMF users. - Various ftrace / jump label improvements. - Convert unwinder tests to KUnit. - Add s390_iommu_aperture kernel parameter to tweak the limits on concurrently usable DMA mappings. - Add ap.useirq AP module option which can be used to disable interrupt use. - Add add_disk() error handling support to block device drivers. - Drop arch specific and use generic implementation of strlcpy and strrchr. - Several __pa/__va usages fixes. - Various cio, crypto, pci, kernel doc and other small fixes and improvements all over the code. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR 3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ== =k0Ab -----END PGP SIGNATURE----- Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for ftrace with direct call and ftrace direct call samples. - Add support for kernel command lines longer than current 896 bytes and make its length configurable. - Add support for BEAR enhancement facility to improve last breaking event instruction tracking. - Add kprobes sanity checks and testcases to prevent kprobe in the mid of an instruction. - Allow concurrent access to /dev/hwc for the CPUMF users. - Various ftrace / jump label improvements. - Convert unwinder tests to KUnit. - Add s390_iommu_aperture kernel parameter to tweak the limits on concurrently usable DMA mappings. - Add ap.useirq AP module option which can be used to disable interrupt use. - Add add_disk() error handling support to block device drivers. - Drop arch specific and use generic implementation of strlcpy and strrchr. - Several __pa/__va usages fixes. - Various cio, crypto, pci, kernel doc and other small fixes and improvements all over the code. [ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ] * tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits) s390: make command line configurable s390: support command lines longer than 896 bytes s390/kexec_file: move kernel image size check s390/pci: add s390_iommu_aperture kernel parameter s390/spinlock: remove incorrect kernel doc indicator s390/string: use generic strlcpy s390/string: use generic strrchr s390/ap: function rework based on compiler warning s390/cio: make ccw_device_dma_* more robust s390/vfio-ap: s390/crypto: fix all kernel-doc warnings s390/hmcdrv: fix kernel doc comments s390/ap: new module option ap.useirq s390/cpumf: Allow multiple processes to access /dev/hwc s390/bitops: return true/false (not 1/0) from bool functions s390: add support for BEAR enhancement facility s390: introduce nospec_uses_trampoline() s390: rename last_break to pgm_last_break s390/ptrace: add last_break member to pt_regs s390/sclp: sort out physical vs virtual pointers usage s390/setup: convert start and end initrd pointers to virtual ... |
||
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
|
David Hildenbrand
|
5c11f00b09 |
x86: remove memory hotplug support on X86_32
CONFIG_MEMORY_HOTPLUG was marked BROKEN over one year and we just restricted it to 64 bit. Let's remove the unused x86 32bit implementation and simplify the Kconfig. Link: https://lkml.kernel.org/r/20210929143600.49379-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
79ef0c0014 |
Tracing updates for 5.16:
- kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4= =Loz8 -----END PGP SIGNATURE----- Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ... |
||
|
Linus Torvalds
|
160729afc8 |
- Use the proper interface for the job: get_unaligned() instead of
memcpy() in the insn decoder - A randconfig build fix -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmF/wogACgkQEsHwGGHe VUoQIw//WdNg7rD++X4GG5l73lGt5ajerqnxjpipiAQTy029cUx0OzeYlWeHR2QH p+zLb3xzghjHn0Gviv9omadcPjHjXbqU6vlR3b95JARM5NnJEKRE7nho/w3mRfaT gWBzo6awh5SXLlo7DYESHRfvyr/Ryjl6LvgBFXprO33ST+0RMsWW/J4bx63xEIUF TKIYtm994O/qQBNLIEu/CB2cOAxtGZrVfRfVK+8QJcUy9xwgP0Oa9I6o9LvzaoJ1 UEvOkL1w6TttRsxgoHz/gskj8+LbXQD9LWVQ55u/HpRDhpNAe4f+RI73Fsgr7Av9 irbrhKwXherKCk9lHgaXQ6XgrrkZyvDY/pvdlj3RlnDt0jsJa6R4gwBGCOXmTgkU 5MF0hHr5kGgXAIJ7AVmYIaTBiLs99/JpF9+9lLW9UuJE2oKj2GxMot3YGTOokj1h u7Y32cta6Ve96ZHHtIXObY5c+LD3OQaljdBayLFaJuTVB6TqVc3dfsEzSNNf/duS 56K28CQEIpPGMe/KW6uZW9eYzQsGv+Jux1X3p650Z/e9A5wVCbdmdEshtACbXSac FVhaybv8ksJKNQmHi3xqbDUpFSMlbXZB3UfpCoQoGR20IfN1H+L7h64Xro5bvbXd LResoLmpnyU3gs3gn9xRYsb4fBr4KYW9jFwzTZSEH3h/Si/Hm2c= =Wj9y -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 changes from Borislav Petkov: - Use the proper interface for the job: get_unaligned() instead of memcpy() in the insn decoder - A randconfig build fix * tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Use get_unaligned() instead of memcpy() x86/Kconfig: Fix an unused variable error in dell-smm-hwmon |
||
|
Linus Torvalds
|
18398bb825 |
The usual round of random minor fixes and cleanups all over the place.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmF/ucwACgkQEsHwGGHe VUpLMQ//d4xim4zD4hQVleYkGWqA2nB050QtutIto1nvsiZdjrUSMjJGZnos2nLd 9tY3NZtgrFfAyjUkal098L+2zed+U6UemIV6kT1F3TnWg4dYByxYABNutOsQGUgw o4sTwjG7ELC273yPt/WY9TMwfMCiX7t80QkjoSeWbkApdfB0aZoxB0CvdLBKwCl/ bxdfX1uvqW7sc6fatcI634hC1HDw8GJThym4/lrMHq2Pr8n/U6pEWoBFsdlprnLk pqb3IGX3kNnpjTmCpZxvd4ZQV8xUlMcJkdEFjKDf7BLtWjwZxPIdGcfnxrpf2EJQ yVZklcabaBNz/zNkoQeyD6Ix1ZCFSxcHRhg0BJpvvhzQ91My2pGZgLuzUYz3Fk7G GjWZje8WZcL3ViL9oGbOYMLSw76wov95+8WMiyKqPaNuzZbS3py5C/ThgqpCdg5b WyQe0GhUvthzLsVz9Gu7OFrbZl6VBz8q7/bxuo+vpFhgC1EiOj2yPSZNUJBRKdcd cFSfybcjk3Qyf7YXmZ/NcD9TQARQO1ediRY6ZNeZr7JYPzyebY+wTfHqDvdX65S5 i/zgeAX4XAuX4pl28nJvDe8x1P7t5T8L6Qno9Lnd1xMG7jWift9RSEOo29rUp0sw gA9xV/BsmApvyM8pgD/lAqxAFzGkYfSy8bB6uav8HccHprVfJE0= =4BVs -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: "The usual round of random minor fixes and cleanups all over the place" * tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Makefile: Remove unneeded whitespaces before tabs x86/of: Kill unused early_init_dt_scan_chosen_arch() x86: Fix misspelled Kconfig symbols x86/Kconfig: Remove references to obsolete Kconfig symbols x86/smp: Remove unnecessary assignment to local var freq_scale |
||
|
Linus Torvalds
|
6e5772c8d9 |
Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the system. The intent behind it is to unify testing of such aspects instead of having each confidential computing solution add its own set of tests to code paths in the kernel, leading to an unwieldy mess. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmF/uLUACgkQEsHwGGHe VUqGbQ/+LOmz8hmL5vtbXw/lVonCSBRKI2KVefnN2VtQ3rjtCq8HlNoq/hAdi15O WntABFV8u4daNAcssp+H/p+c8Mt/NzQa60TRooC5ZIynSOCj4oZQxTWjcnR4Qxrf oABy4sp09zNW31qExtTVTwPC/Ejzv4hA0Vqt9TLQOSxp7oYVYKeDJNp79VJK64Yz Ky7epgg8Pauk0tAT76ATR4kyy9PLGe4/Ry0bOtAptO4NShL1RyRgI0ywUmptJHSw FV/MnoexdAs4V8+4zPwyOkf8YMDnhbJcvFcr7Yd9AEz2q9Z1wKCgi1M3aZIoW8lV YMXECMGe9DfxmEJbnP5zbnL6eF32x+tbq+fK8Ye4V2fBucpWd27zkcTXjoP+Y+zH NLg+9QykR9QCH75YCOXcAg1Q5hSmc4DaWuJymKjT+W7MKs89ywjq+ybIBpLBHbQe uN9FM/CEKXx8nQwpNQc7mdUE5sZeCQ875028RaLbLx3/b6uwT6rBlNJfxl/uxmcZ iF1kG7Cx4uO+7G1a9EWgxtWiJQ8GiZO7PMCqEdwIymLIrlNksAk7nX2SXTuH5jIZ YDuBj/Xz2UUVWYFm88fV5c4ogiFlm9Jeo140Zua/BPdDJd2VOP013rYxzFE/rVSF SM2riJxCxkva8Fb+8TNiH42AMhPMSpUt1Nmd1H2rcEABRiT83Ow= =Na0U -----END PGP SIGNATURE----- Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull generic confidential computing updates from Borislav Petkov: "Add an interface called cc_platform_has() which is supposed to be used by confidential computing solutions to query different aspects of the system. The intent behind it is to unify testing of such aspects instead of having each confidential computing solution add its own set of tests to code paths in the kernel, leading to an unwieldy mess" * tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide: Replace the use of mem_encrypt_active() with cc_platform_has() x86/sev: Replace occurrences of sev_es_active() with cc_platform_has() x86/sev: Replace occurrences of sev_active() with cc_platform_has() x86/sme: Replace occurrences of sme_active() with cc_platform_has() powerpc/pseries/svm: Add a powerpc version of cc_platform_has() x86/sev: Add an x86 version of cc_platform_has() arch/cc: Introduce a function to check for confidential computing features x86/ioremap: Selectively build arch override encryption functions |
||
|
Linus Torvalds
|
8cb1ae19bf |
x86/fpu updates:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from explicit
error codes to a boolean fail/success as that's all what the calling
code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX support:
- Distangle the public header maze and remove especially the misnomed
kitchen sink internal.h which is despite it's name included all over
the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime by
flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code into
the FPU core which removes the number of exports and avoids adding
even more export when AMX has to be supported in KVM. This also
removes duplicated code which was of course unnecessary different and
incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new fpstate
container and just switching the buffer pointer from the user space
buffer to the KVM guest buffer when entering vcpu_run() and flipping
it back when leaving the function. This cuts the memory requirements
of a vCPU for FPU buffers in half and avoids pointless memory copy
operations.
This also solves the so far unresolved problem of adding AMX support
because the current FPU buffer handling of KVM inflicted a circular
dependency between adding AMX support to the core and to KVM. With
the new scheme of switching fpstate AMX support can be added to the
core code without affecting KVM.
- Replace various variables with proper data structures so the extra
information required for adding dynamically enabled FPU features (AMX)
can be added in one place
- Add AMX (Advanved Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR (MSR_XFD)
which allows to trap the (first) use of an AMX related instruction,
which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra 8K
or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and cleared
on exec(). The permission policy of the kernel is restricted to
sigaltstack size validation, but the syscall obviously allows
further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2) which
takes granted permissions and the potentially resulting larger
signal frame into account. This mechanism can also be used to
enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support was
added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the use
of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have been
disabled in XCR0. If permission has been granted, then a new fpstate
which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler sends
SIGSEGV to the task. That's not elegant, but unavoidable as the
other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused by
unexpected memory allocation failures is not a fundamentally new
concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is disarmed
for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with the
same life time rules as the FPU register state itself. The mechanism
is keyed off with a static key which is default disabled so !AMX
equipped CPUs have zero overhead. On AMX enabled CPUs the overhead
is limited by comparing the tasks XFD value with a per CPU shadow
variable to avoid redundant MSR writes. In case of switching from a
AMX using task to a non AMX using task or vice versa, the extra MSR
write is obviously inevitable.
All other places which need to be aware of the variable feature sets
and resulting variable sizes are not affected at all because they
retrieve the information (feature set, sizes) unconditonally from
the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support is in
the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which has
not been caught in review and testing right away was restricted to AMX
enabled systems, which is completely irrelevant for anyone outside Intel
and their early access program. There might be dragons lurking as usual,
but so far the fine grained refactoring has held up and eventual yet
undetected fallout is bisectable and should be easily addressable before
the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity to
follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for inclusion
into 5.16-rc1.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/NkITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYodDkEADH4+/nN/QoSUHIuuha5Zptj3g2b16a
/3TxT9fhwPen/kzMGsUk70s3iWJMA+I5dCfkSZexJ2hfhcRe9cBzZIa1HCawKwf3
YCISTsO/M+LpeORuZ+TpfFLJKnxNr1SEOl+EYffGhq0AkCjifb9Cnr0JZuoMUzGU
jpfJZ2bj28ri5lG812DtzSMBM9E3SAwgJv+GNjmZbxZKb9mAfhbAMdBUXHirX7Ej
jmx6koQjYOKwYIW8w1BrdC270lUKQUyJTbQgdRkN9Mh/HnKyFixQ18JqGlgaV2cT
EtYePUfTEdaHdAhUINLIlEug1MfOslHU+HyGsdywnoChNB4GHPQuePC5Tz60VeFN
RbQ9aKcBUu8r95rjlnKtAtBijNMA4bjGwllVxNwJ/ZoA9RPv1SbDZ07RX3qTaLVY
YhVQl8+shD33/W24jUTJv1kMMexpHXIlv0gyfMryzpwI7uzzmGHRPAokJdbYKctC
dyMPfdE90rxTiMUdL/1IQGhnh3awjbyfArzUhHyQ++HyUyzCFh0slsO0CD18vUy8
FofhCugGBhjuKw3XwLNQ+KsWURz5qHctSzBc3qMOSyqFHbAJCVRANkhsFvWJo2qL
75+Z7OTRebtsyOUZIdq26r4roSxHrps3dupWTtN70HWx2NhQG1nLEw986QYiQu1T
hcKvDmehQLrUvg==
=x3WL
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
|
||
|
Linus Torvalds
|
9a7e0a90a4 |
Scheduler updates:
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
|
||
|
Masami Hiramatsu
|
1f6d3a8f5e |
kprobes: Add a test case for stacktrace from kretprobe handler
Add a test case for stacktrace from kretprobe handler and
nested kretprobe handlers.
This test checks both of stack trace inside kretprobe handler
and stack trace from pt_regs. Those stack trace must include
actual function return address instead of kretprobe trampoline.
The nested kretprobe stacktrace test checks whether the unwinder
can correctly unwind the call frame on the stack which has been
modified by the kretprobe.
Since the stacktrace on kretprobe is correctly fixed only on x86,
this introduces a meta kconfig ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
which tells user that the stacktrace on kretprobe is correct or not.
The test results will be shown like below;
TAP version 14
1..1
# Subtest: kprobes_test
1..6
ok 1 - test_kprobe
ok 2 - test_kprobes
ok 3 - test_kretprobe
ok 4 - test_kretprobes
ok 5 - test_stacktrace_on_kretprobe
ok 6 - test_stacktrace_on_nested_kretprobe
# kprobes_test: pass:6 fail:0 skip:0 total:6
# Totals: pass:6 fail:0 skip:0 total:6
ok 1 - kprobes_test
Link: https://lkml.kernel.org/r/163516211244.604541.18350507860972214415.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
|
Thomas Gleixner
|
3aac3ebea0 |
x86/signal: Implement sigaltstack size validation
For historical reasons MINSIGSTKSZ is a constant which became already too
small with AVX512 support.
Add a mechanism to enforce strict checking of the sigaltstack size against
the real size of the FPU frame.
The strict check can be enabled via a config option and can also be
controlled via the kernel command line option 'strict_sas_size' independent
of the config switch.
Enabling it might break existing applications which allocate a too small
sigaltstack but 'work' because they never get a signal delivered. Though it
can be handy to filter out binaries which are not yet aware of
AT_MINSIGSTKSZ.
Also the upcoming support for dynamically enabled FPU features requires a
strict sanity check to ensure that:
- Enabling of a dynamic feature, which changes the sigframe size fits
into an enabled sigaltstack
- Installing a too small sigaltstack after a dynamic feature has been
added is not possible.
Implement the base check which is controlled by config and command line
options.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-3-chang.seok.bae@intel.com
|
||
|
Steven Rostedt (VMware)
|
4a30e4c930 |
ftrace/x86_64: Have function graph tracer depend on DYNAMIC_FTRACE
The function graph tracer is going to now depend on ARCH_SUPPORTS_FTRACE_OPS, as that also means that it can support ftrace args. Since ARCH_SUPPORTS_FTRACE_OPS depends on DYNAMIC_FTRACE, this means that the function graph tracer for x86_64 will need to depend on DYNAMIC_FTRACE. Link: https://lkml.kernel.org/r/20211020233555.16b0dbf2@rorschach.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Heiko Carstens
|
c316eb4460 |
samples: add HAVE_SAMPLE_FTRACE_DIRECT config option
Add HAVE_SAMPLE_FTRACE_DIRECT config option which can be selected by architectures which have support for ftrace direct call samples. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20211012133802.2460757-4-hca@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Tim Chen
|
66558b730f |
sched: Add cluster scheduler level for x86
There are x86 CPU architectures (e.g. Jacobsville) where L2 cahce is shared among a cluster of cores instead of being exclusive to one single core. To prevent oversubscription of L2 cache, load should be balanced between such L2 clusters, especially for tasks with no shared data. On benchmark such as SPECrate mcf test, this change provides a boost to performance especially on medium load system on Jacobsville. on a Jacobsville that has 24 Atom cores, arranged into 6 clusters of 4 cores each, the benchmark number is as follow: Improvement over baseline kernel for mcf_r copies run time base rate 1 -0.1% -0.2% 6 25.1% 25.1% 12 18.8% 19.0% 24 0.3% 0.3% So this looks pretty good. In terms of the system's task distribution, some pretty bad clumping can be seen for the vanilla kernel without the L2 cluster domain for the 6 and 12 copies case. With the extra domain for cluster, the load does get evened out between the clusters. Note this patch isn't an universal win as spreading isn't necessarily a win, particually for those workload who can benefit from packing. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210924085104.44806-4-21cnbao@gmail.com |
||
|
Borislav Petkov
|
711885906b |
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
This Kconfig option was added initially so that memory encryption is
enabled by default on machines which support it.
However, devices which have DMA masks that are less than the bit
position of the encryption bit, aka C-bit, require the use of an IOMMU
or the use of SWIOTLB.
If the IOMMU is disabled or in passthrough mode, the kernel would switch
to SWIOTLB bounce-buffering for those transfers.
In order to avoid that,
2cc13bb4f59f ("iommu: Disable passthrough mode when SME is active")
disables the default IOMMU passthrough mode so that devices for which the
default 256K DMA is insufficient, can use the IOMMU instead.
However 2, there are cases where the IOMMU is disabled in the BIOS, etc.
(think the usual hardware folk "oops, I dropped the ball there" cases) or a
driver doesn't properly use the DMA APIs or a device has a firmware or
hardware bug, e.g.:
ea68573d408f ("drm/amdgpu: Fail to load on RAVEN if SME is active")
However 3, in the above GPU use case, there are APIs like Vulkan and
some OpenGL/OpenCL extensions which are under the assumption that
user-allocated memory can be passed in to the kernel driver and both the
GPU and CPU can do coherent and concurrent access to the same memory.
That cannot work with SWIOTLB bounce buffers, of course.
So, in order for those devices to function, drop the "default y" for the
SME by default active option so that users who want to have SME enabled,
will need to either enable it in their config or use "mem_encrypt=on" on
the kernel command line.
[ tlendacky: Generalize commit message. ]
Fixes: 7744ccdbc16f ("x86/mm: Add Secure Memory Encryption (SME) support")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de
|
||
|
Linus Torvalds
|
c22ccc4a3e |
- A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
out due to histerical reasons and 64-bit kernels reject them - A fix to clear X86_FEATURE_SMAP when support for is not config-enabled - Three fixes correcting misspelled Kconfig symbols used in code - Two resctrl object cleanup fixes - Yet another attempt at fixing the neverending saga of botched x86 timers, this time because some incredibly smart hardware decides to turn off the HPET timer in a low power state - who cares if the OS is relying on it... - Check the full return value range of an SEV VMGEXIT call to determine whether it returned an error -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmFiqboACgkQEsHwGGHe VUpIFA//cLWfa1vvamCcLjW0lruQVzHrZesO4Cbti3Fyp2at/Dtwt9w/uZPu9NAa +sreJBdrkZfo9lmKW6/E1MmLT/YlLg8YHsylKn9d+XSdcy0qWXLYdVVm7bb4teJf XxRQfYNQrwfpjFNnt+7NUcaqte2zUo7K16CctJF5+E6SGUn+hlu6zK15tf6MMAM1 TFHsQWEuRW5Mgc7eD734cNGDOJgzvb4IACn5BNfKR1+jD1ANfutytXjGqcveJ/sg lBoWMCU47vo5/uoW516oBK6PfQ/+s1OvYAx2G4DMQSC7WpEWpxnJUoszj9umu+jE VndS8jQ4WGXcVmfkkwUHbVxcJzsPEzZ/5m+nER9hrGOykKWTajzi2MirBHju5EKv xfYLqEJHNG9YulxKy2wIW0VRmXDE3wFZfaPAmQbLXud1KfzlC/EpEaloZSJSgqyG L4uOKk8CBumYJzgVCfTFAqqr1HhmeylYSxHmOUEzTm0sEJX2HuodGcl+sPI/LDPW MkjVYXq2sOUEVLmk5xyJIkbAUcK2X/Fzt3rKS4CVsjfzWRW67o1oopMy6ZrQ0o/h Dt/fHub/+Pke5sbB2+RiRsvq3aDftRkvaZK05pTiqlE9gFlKaCVwxDQqvmTnY0oa PkPzauXRC4qjNsdDMGHaiclm/fk/nlLM9vxXGJ+oTXP6snC4OhQ= =kKOw -----END PGP SIGNATURE----- Merge tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them out due to historical reasons and 64-bit kernels reject them - A fix to clear X86_FEATURE_SMAP when support for is not config-enabled - Three fixes correcting misspelled Kconfig symbols used in code - Two resctrl object cleanup fixes - Yet another attempt at fixing the neverending saga of botched x86 timers, this time because some incredibly smart hardware decides to turn off the HPET timer in a low power state - who cares if the OS is relying on it... - Check the full return value range of an SEV VMGEXIT call to determine whether it returned an error * tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Restore the masking out of reserved MXCSR bits x86/Kconfig: Correct reference to MWINCHIP3D x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n x86/entry: Correct reference to intended CONFIG_64_BIT x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails x86/hpet: Use another crystalball to evaluate HPET usability x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0] |
||
|
Linus Torvalds
|
0dcf60d001 |
asm-generic: build fixes for v5.15
There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. There is a small merge conflict against an earlier partial fix for the QCOM_SCM dependency problems. Finally, the branch also includes a small unrelated build fix for NOMMU architectures. Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFgVp8ACgkQmmx57+YA GNlQoA/+O0ljtTy5D0MjRGmFDs11M5AtKNrfys82lm2GeEnc4lnxn722jLk8kR6s y6DSOWFs7w1bqhKExQNehZYtJO3sgW/9qiLMV9qfOx1Nc6WwhDPcYM9bMyGlpTmL M456nh8NopixV7slanNtfz1e0kbMKoK+4Ub7M5OHepK6x9FKQXQYQpeoBxaXHmWZ 9eaRiL/CsRHO/cSkvpq1GtL7IVrudvij3FDHzxoDGFFjkCUm9LiN/8yrnVxHA9G7 3EPyJazI559SsnxXJR32udGPJWZV1HZ7D5gbxDvzr5rZ9EX0JpyPGJsuXUR1wqlS UB2Y7AUTSxkwDiZ8UhPoXn6i67WAirzEsP2WmdS4v6NEbxlNloLGTIeGwcwkCRMU DBvMtDW8kKusgVu/OkEUgoC6MTRt+Mg+gZcQI/C4sp0MqZGaMY6c7abnYjqwEzBV ARS7bUYyME2GL6wNDPFB8esuD9jjdFXy96bGHATmzMxT3012K3X7ufFOzJZ+GOF9 pan00fgoC17oiI+Xu/sZEHns6KvMTSE11Aw3uk+yhHxYtZbzWi2B5Nk+4tBdsOxF PAZdZ5qsyuEcBw+PyfbyZIHWOrlbvZkrmjiIsMJo63cIXuOtgraCjvRRAwe/ZwoU PXgPcUmrlAs06WjKhuQAZWt6bww7cEP2XyOYlDqwZ4Vj0dqav6g= =187C -----END PGP SIGNATURE----- Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally |