.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.
To avoid that, move .opd section inside read-only memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu
On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.
Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.
To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com
We fix the following warnings when building kernel with W=1:
arch/powerpc/kernel/eeh.c:598: warning: Function parameter or member 'function' not described in 'eeh_pci_enable'
arch/powerpc/kernel/eeh.c:774: warning: Function parameter or member 'edev' not described in 'eeh_set_dev_freset'
arch/powerpc/kernel/eeh.c:774: warning: expecting prototype for eeh_set_pe_freset(). Prototype was for eeh_set_dev_freset() instead
arch/powerpc/kernel/eeh.c:814: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset_full'
arch/powerpc/kernel/eeh.c:944: warning: Function parameter or member 'ops' not described in 'eeh_init'
arch/powerpc/kernel/eeh.c:1451: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset'
arch/powerpc/kernel/eeh.c:1526: warning: Function parameter or member 'func' not described in 'eeh_pe_inject_err'
arch/powerpc/kernel/eeh.c:1526: warning: Excess function parameter 'function' described in 'eeh_pe_inject_err'
Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211009041630.4135-1-songkai01@inspur.com
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is
used to compile support for other platforms such as Microwatt. There
is no need for OPAL calls on these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org
When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.
On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.
Fix that by discarding disabled interrupts in get_irqchip_state().
Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
The HPTE B field is a 2-bit field with values 0b10 and 0b11 reserved.
This field is also taken from the HPTE and used when KVM executes
TLBIEs to set the B field of those instructions.
Disallow the guest setting B to a reserved value with H_ENTER by
rejecting it. This is the same approach already taken for rejecting
reserved (unsupported) LLP values. This prevents the guest from being
able to induce the host to execute TLBIE with reserved values, which
is not known to be a problem with current processors but in theory it
could prevent the TLBIE from working correctly in a future processor.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145749.1331331-1-npiggin@gmail.com
Replace pdev->driver->name by dev_driver_string() for the corresponding
struct device. This is a step toward removing pci_dev->driver.
Move the function nearer its only user and instead of the ?: operator use a
normal "if" which is more readable.
Link: https://lore.kernel.org/r/20211004125935.2300113-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Patch adds support to include Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers. Update the definition of PERF_REG_PMU_MASK_300/31 and
PERF_REG_EXTENDED_MAX to include these SPR's.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-4-atrajeev@linux.vnet.ibm.com
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask
value for extended registers. Current definition of these mask values
uses hex constant and does not use registers by name, making it less
readable. Patch refactor the macro values by or'ing together the actual
register value constants. Also include PERF_REG_EXTENDED_MAX as
part of enum definition.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-2-atrajeev@linux.vnet.ibm.com
Fix a regression hit by the IPR SCSI driver, introduced by the recent addition of MSI
domains on pseries.
A big series including 8 BPF fixes, some with potential security impact and the rest
various code generation issues.
Fix our program check assembler entry path, which was accidentally jumping into a gas
macro and generating strange stack frames, which could confuse find_bug().
A couple of fixes, and related changes, to fix corner cases in our machine check handling.
Fix our DMA IOMMU ops, which were not always returning the optimal DMA mask, leading to
at least one device falling back to 32-bit DMA when it shouldn't.
A fix for KUAP handling on 32-bit Book3S.
Fix crashes seen when kdumping on some pseries systems.
Thanks to: Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric Le Goater,
Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem, Christoph Hellwig, Johan Almbladh, Stan
Johnson.
-----BEGIN PGP SIGNATURE-----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=q+1t
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bit of a big batch, partly because I didn't send any last week, and
also just because the BPF fixes happened to land this week.
Summary:
- Fix a regression hit by the IPR SCSI driver, introduced by the
recent addition of MSI domains on pseries.
- A big series including 8 BPF fixes, some with potential security
impact and the rest various code generation issues.
- Fix our program check assembler entry path, which was accidentally
jumping into a gas macro and generating strange stack frames, which
could confuse find_bug().
- A couple of fixes, and related changes, to fix corner cases in our
machine check handling.
- Fix our DMA IOMMU ops, which were not always returning the optimal
DMA mask, leading to at least one device falling back to 32-bit DMA
when it shouldn't.
- A fix for KUAP handling on 32-bit Book3S.
- Fix crashes seen when kdumping on some pseries systems.
Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
Christoph Hellwig, Johan Almbladh, Stan Johnson"
* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
powerpc/32s: Fix kuap_kernel_restore()
powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
powerpc/64: warn if local irqs are enabled in NMI or hardirq context
powerpc/traps: do not enable irqs in _exception
powerpc/64s: fix program check interrupt emergency stack path
powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
powerpc/bpf ppc32: Fix JMP32_JSET_K
powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
powerpc/security: Add a helper to query stf_barrier type
powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf: Fix BPF_MOD when imm == 1
powerpc/bpf: Validate branch ranges
powerpc/lib: Add helper to check if offset is within conditional branch range
powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.
Remove it to prevent confusion.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-5-nathanl@linux.ibm.com
The core DLPAR code supports two actions (add and remove) and three
subtypes of action:
* By DRC index: the action is attempted on a single specified resource.
This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
beginning at the specified index. This is implemented only by the memory
DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
specified number of resources to which the action can be applied.
I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:
$ ppc64_cpu --smt ; nproc
SMT=8
24
$ printf "cpu remove count 2" > /sys/kernel/dlpar
$ nproc
8
$ printf "cpu add count 2" > /sys/kernel/dlpar
-bash: printf: write error: Invalid argument
$ dmesg | tail -2
pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
dlpar: Could not handle DLPAR request "cpu add count 2"
$ nproc
8
$ drmgr -c cpu -a -q 2 # this uses the by-index method
Validating CPU DLPAR capability...yes.
CPU 1
CPU 17
$ nproc
24
This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.
This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.
Summary:
* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
difficult to test.
So let's remove it.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality")
Fixes: b015f6bc9547 ("powerpc/pseries: Add cpu DLPAR support for drc-info property")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com
On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.
The CPU DLPAR code has the following shortcomings:
* Cache nodes returned as siblings of a new CPU node by
ibm,configure-connector are silently discarded; only the CPU node is
added to the device tree.
* Cache nodes which become unreferenced in the processor removal path are
not removed from the device tree. This can lead to duplicate nodes when
the post-migration device tree update code replaces cache nodes.
This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.
Booted with two processors:
$ pwd
/sys/firmware/devicetree/base/cpus
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@8/
$ lsprop */l2-cache
l2-cache@2010/l2-cache
00003110 (12560)
l2-cache@2011/l2-cache
00003111 (12561)
PowerPC,POWER9@0/l2-cache
00002010 (8208)
PowerPC,POWER9@8/l2-cache
00002011 (8209)
$ ls /sys/devices/system/cpu/cpu0/cache/
index0 index1 index2 index3
After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@10/
PowerPC,POWER9@8/
$ lsprop PowerPC\,POWER9@10/l2-cache
PowerPC,POWER9@10/l2-cache
00002012 (8210)
$ ls /sys/devices/system/cpu/cpu16/cache/
index0 index1
$ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE
When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:
Duplicate name in cpus, renamed to "l2-cache@2011#1"
Duplicate name in cpus, renamed to "l3-cache@3111#1"
and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:
$ lsprop l[23]-cache@*/ibm,phandle
l2-cache@2010/ibm,phandle
00002010 (8208)
l2-cache@2011#1/ibm,phandle
00002011 (8209)
l2-cache@2011/ibm,phandle
00002011 (8209)
l3-cache@3110/ibm,phandle
00003110 (12560)
l3-cache@3111#1/ibm,phandle
00003111 (12561)
l3-cache@3111/ibm,phandle
00003111 (12561)
Address these issues by:
* Correctly processing siblings of the node returned from
dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
that they are not associated with other CPUs or caches.
Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com
vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160
[c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0
[c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0
[c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70
[c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0
[c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250
The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.
Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
Add comments more clearly documenting that this function determines whether
hypervisor-level preemption of the VM has occurred.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-2-nathanl@linux.ibm.com
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
Fixes: 107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
UPD_CONSTR was previously a preprocessor define for an old GCC 4.9
inline asm bug with m<> constraints.
Fixes: 6563139d90ad ("powerpc: remove GCC version check for UPD_CONSTR")
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914161712.2463458-1-ndesaulniers@google.com
Commit 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba952 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
Fixes: 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups
that are done under pcibios_add_device() which in turn is only called in
pci_device_add() whih is called when a PCI device is scanned.
pci_dev_assign_added() is called in pci_bus_add_device() which is only
called after scanning the device. Thus pci_dev_is_added() is always
false and can be dropped.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log slightly to reflect Oliver's comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210910141940.2598035-2-schnelle@linux.ibm.com
commit 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
removed of_show_percpuinfo but didn't remove the prototype.
Remove it.
Fixes: 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903063246.70691-1-dja@axtens.net
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
The upcoming PAPR spec adds a 2M page size, bit 23 right after 16G page
size in the "ibm,query-pe-dma-window" call.
This adds support for the new page size. Since the new page size is out
of sorted order, this changes the loop to not assume that shift[] is
sorted.
This has now been tested and is known to work on a pre-release version
of phyp.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006044735.1114669-1-aik@ozlabs.ru
On pseries LPAR when an empty slot is assigned to partition OR in single
LPAR mode, kdump kernel crashes during issuing PHB reset.
In the kdump scenario, we traverse all PHBs and issue reset using the
pe_config_addr of the first child device present under each PHB. However
the code assumes that none of the PHB slots can be empty and uses
list_first_entry() to get the first child device under the PHB. Since
list_first_entry() expects the list to be non-empty, it returns an
invalid pci_dn entry and ends up accessing NULL phb pointer under
pci_dn->phb causing kdump kernel crash.
This patch fixes the below kdump kernel crash by skipping empty slots:
audit: initializing netlink subsys (disabled)
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
pstore: Registered nvram as persistent store backend
Issue PHB reset ...
audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1
BUG: Kernel NULL pointer dereference on read at 0x00000268
Faulting instruction address: 0xc000000008101fb0
Oops: Kernel access of bad area, sig: 7 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1
NIP: c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70
REGS: c00000001161b840 TRAP: 0300 Not tainted (5.14.0)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000224 XER: 20040002
CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0
...
NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0
LR __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
Call Trace:
0xc00000001161bb80 (unreliable)
__machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
do_one_initcall+0x60/0x2d0
kernel_init_freeable+0x350/0x3f8
kernel_init+0x3c/0x17c
ret_from_kernel_thread+0x5c/0x64
Fixes: 5a090f7c363fd ("powerpc/pseries: PCIE PHB reset")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
[mpe: Tweak wording and trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter
At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the
value contained in regs->kuap. However, when regs->kuap contains
0xffffffff it means that KUAP was not unlocked so calling kuap_unlock()
is unrelevant and results in jeopardising the contents of kernel space
segment registers.
So check that regs->kuap doesn't contain KUAP_NONE before calling
kuap_unlock(). In the meantime it also means that if KUAP has not
been correcly locked back at interrupt exit, it must be locked
before continuing. This is done by checking the content of
current->thread.kuap which was returned by kuap_get_and_assert_locked()
Fixes: 16132529cee5 ("powerpc/32s: Rework Kernel Userspace Access Protection")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu
The IPR drivers tests for MSI support at probe time with MSI vector 0
and when done, frees the IRQ with free_irq(). This test was introduced
by 95fecd90397e ("ipr: add test for MSI interrupt support") as an
improvement of commit 5a9ef25b14d3 ("[SCSI] ipr: add MSI support")
because a boot failure was reported on a Bimini PowerPC system:
https://lore.kernel.org/r/1242926159.3007.5.camel@localhost.localdomain
It was finally decided to remove MSI support on Bimini systems in
6eb0ac03899a ("powerpc/maple: Add a quirk to disable MSI for IPR on
Bimini").
Linux 5.15-rc1 added MSI domain support to the pseries machine and
when free_irq is called() in the driver, msi_domain_deactivate() also
is. This resets the MSI table entry of the associate vector by calling
__pci_write_msi_msg() with an empty message and breaks any further
activation of the same vector. In the case of the IPR driver, it
breaks the initialization sequence of the IOA.
Introduce an empty irq_write_msi_msg() handler in the MSI domain of
the pseries machine to avoid clearing the MSI vector entry. Updating
the entry is not strictly necessary since it is initialized by the
underlying hypervisor, PowerVM or QEMU/KVM.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
[mpe: Tweak comment wording and formatting slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210930102535.1047230-1-clg@kaod.org
The machine check handler is not considered NMI on 64s. The early
handler is the true NMI handler, and then it schedules the
machine_check_exception handler to run when interrupts are enabled.
This works fine except the case of an unrecoverable MCE, where the true
NMI is taken when MSR[RI] is clear, it can not recover, so it calls
machine_check_exception directly so something might be done about it.
Calling an async handler from NMI context can result in irq state and
other things getting corrupted. This can also trigger the BUG at
arch/powerpc/include/asm/interrupt.h:168
BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE));
Fix this by making an _async version of the handler which is called
in the normal case, and a NMI version that is called for unrecoverable
interrupts.
Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com
If a NMI hits early in an interrupt handler before the irq soft-mask
state is reconciled, that can cause a false-positive BUG with a
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion.
Remove that assertion and instead check the case that if regs->msr has
EE clear, then regs->softe should be marked as disabled so the irq state
looks correct to NMI handlers, the same as how it's fixed up in the
case it was implicit soft-masked.
This doesn't fix a known problem -- the change that was fixed by commit
4ec5feec1ad02 ("powerpc/64s: Make NMI record implicitly soft-masked code
as irqs disabled") was the addition of a warning in the soft-nmi
watchdog interrupt which can never actually fire when MSR[EE]=0. However
it may be important if NMI handlers grow more code, and it's less
surprising to anything using 'regs' - (I tripped over this when working
in the area).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-5-npiggin@gmail.com
This can help catch bugs such as the one fixed by the previous change
to prevent _exception() from enabling irqs.
ppc32 could have a similar warning but it has no good config option to
debug this stuff (the test may be overkill to add for production
kernels).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-4-npiggin@gmail.com
_exception can be called by machine check handlers when the MCE hits
user code (e.g., pseries and powernv). This will enable local irqs
because, which is a dicey thing to do in NMI or hard irq context.
This seemed to worked out okay because a userspace MCE can basically be
treated like a synchronous interrupt (after async / imprecise MCEs are
filtered out). Since NMI and hard irq handlers have started growing
nmi_enter / irq_enter, and more irq state sanity checks, this has
started to cause problems (or at least trigger warnings).
The Fixes tag to the commit which introduced this rather than try to
work out exactly which commit was the first that could possibly cause a
problem because that may be difficult to prove.
Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com
'andi' only takes an unsigned 16-bit value. Correct the imm range used
when emitting andi.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b94489f52831305ec15aca4dd04a3527236be7e8.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Emit similar instruction sequences to commit a048a07d7f4535
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.
Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
We aren't handling subtraction involving an immediate value of
0x80000000 properly. Fix the same.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fold in fix from Naveen to use imm <= 32768]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Only ignore the operation if dividing by 1.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Add checks to ensure that we never emit branch instructions with
truncated branch offsets.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
Introduce a powerpc version of the cc_platform_has() function. This will
be used to replace the powerpc mem_encrypt_active() implementation, so
the implementation will initially only support the CC_ATTR_MEM_ENCRYPT
attribute.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20210928191009.32551-5-bp@alien8.de
Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.
Correct phy-connection-type value should be "2500base-x".
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
