-----BEGIN PGP SIGNATURE-----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=71WB
-----END PGP SIGNATURE-----
Merge tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- DFS fix (for race with tree disconnect and dfs cache worker)
- Four fixes for SMB3.1.1 posix extensions:
- improve special file support e.g. to Samba, retrieving the file
type earlier
- reduce roundtrips (e.g. on ls -l, in some cases)
* tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential race in cifs_put_tcon()
smb3.1.1: fix posix mounts to older servers
fs/smb/client: cifs_prime_dcache() for SMB3 POSIX reparse points
fs/smb/client: Implement new SMB3 POSIX type
fs/smb/client: avoid querying SMB2_OP_QUERY_WSL_EA for SMB3 POSIX
dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so
make sure to call list_replace_init() on @tcon->dfs_ses_list after
kworker is cancelled or finished.
Fixes: 4f42a8b54b ("smb: client: fix DFS interlink failover")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers which implement the SMB3.1.1 POSIX extensions did not
set the file type in the mode in the infolevel 100 response.
With the recent changes for checking the file type via the mode field,
this can cause the root directory to be reported incorrectly and
mounts (e.g. to ksmbd) to fail.
Fixes: 6a832bc8bb ("fs/smb/client: Implement new SMB3 POSIX type")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The aux_payload_buf allocation in SMB2 read is performed without ensuring
alignment, which could result in out-of-bounds (OOB) reads during
cryptographic operations such as crypto_xor or ghash. This patch aligns
the allocation of aux_payload_buf to prevent these issues.
(Note that to add this patch to stable would require modifications due
to recent patch "ksmbd: use __GFP_RETRY_MAYFAIL")
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Spares an extra revalidation request
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Avoid extra roundtrip
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
An offset from client could be a negative value, It could allows
to write data outside the bounds of the allocated buffer.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
An offset from client could be a negative value, It could lead
to an out-of-bounds read from the stream_buf.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Jordy Zomer <jordyzomer@google.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
GCC 15 introduces -Werror=unterminated-string-initialization by default,
this results in the following build error
fs/smb/server/smb_common.c:21:35: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-ini
tialization]
21 | static const char basechars[43] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_-!@#$%";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To this we are replacing char basechars[43] with a character pointer
and then using strlen to get the length.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=dfo/
-----END PGP SIGNATURE-----
Merge tag '6.13-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- directory lease fixes
- password rotation fixes
- reconnect fix
- fix for SMB3.02 mounts
- DFS (global namespace) fixes
- fixes for special file handling (most relating to better handling
various types of symlinks)
- two minor cleanups
* tag '6.13-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal version number
cifs: unlock on error in smb3_reconfigure()
cifs: during remount, make sure passwords are in sync
cifs: support mounting with alternate password to allow password rotation
smb: Initialize cfid->tcon before performing network ops
smb: During unmount, ensure all cached dir instances drop their dentry
smb: client: fix noisy message when mounting shares
smb: client: don't try following DFS links in cifs_tree_connect()
smb: client: allow reconnect when sending ioctl
smb: client: get rid of @nlsc param in cifs_tree_connect()
smb: client: allow more DFS referrals to be cached
cifs: Fix parsing reparse point with native symlink in SMB1 non-UNICODE session
cifs: Validate content of WSL reparse point buffers
cifs: Improve guard for excluding $LXDEV xattr
cifs: Add support for parsing WSL-style symlinks
cifs: Validate content of native symlink
cifs: Fix parsing native symlinks relative to the export
smb: client: fix NULL ptr deref in crypto_aead_setkey()
Update misleading comment in cifs_chan_update_iface
smb: client: change return value in open_cached_dir_by_dentry() if !cfids
...
-----BEGIN PGP SIGNATURE-----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=q5KR
-----END PGP SIGNATURE-----
Merge tag '6.13-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- fix use after free due to race in ksmd workqueue handler
- debugging improvements
- fix incorrectly formatted response when client attempts SMB1
- improve memory allocation to reduce chance of OOM
- improve delays between retries when killing sessions
* tag '6.13-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix use-after-free in SMB request handling
ksmbd: add debug print for pending request during server shutdown
ksmbd: add netdev-up/down event debug print
ksmbd: add debug prints to know what smb2 requests were received
ksmbd: add debug print for rdma capable
ksmbd: use msleep instaed of schedule_timeout_interruptible()
ksmbd: use __GFP_RETRY_MAYFAIL
ksmbd: fix malformed unsupported smb1 negotiate response
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes: 35f834265e ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes the case for example where the password specified on mount is a
recently expired password, but password2 is valid. Without this patch
this mount scenario would fail.
This patch introduces the following changes to support password rotation on
mount:
1. If an existing session is not found and the new session setup results in
EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if
available), and retry the mount.
2. To match the new mount with an existing session, add conditions to check
if a) password and password2 of the new mount and the existing session are
the same, or b) password of the new mount is the same as the password2 of
the existing session, and password2 of the new mount is the same as the
password of the existing session.
3. If an existing session is found, but needs reconnect, retry the session
setup after swapping password and password2 (if available), in case the
previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the client unconditionally attempts to get an DFS referral to
check if share is DFS, some servers may return different errors that
aren't handled in smb2_get_dfs_refer(), so the following will be
logged in dmesg:
CIFS: VFS: \\srv\IPC$ smb2_get_dfs_refer: ioctl error...
which can confuse some users while mounting an SMB share.
Fix this by logging such error with FYI.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't properly support chasing DFS links in cifs_tree_connect()
because
(1) We don't support creating new sessions while we're reconnecting,
which would be required for DFS interlinks.
(2) ->is_path_accessible() can't be called from cifs_tree_connect()
as it would deadlock with smb2_reconnect(). This is required for
checking if new DFS target is a nested DFS link.
By unconditionally trying to get an DFS referral from new DFS target
isn't correct because if the new DFS target (interlink) is an DFS
standalone namespace, then we would end up getting -ELOOP and then
potentially leaving tcon disconnected.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_tree_connect() no longer uses ioctl, so allow sessions to be
reconnected when sending ioctls.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can access local_nls directly from @tcon->ses, so there is no need
to pass it as parameter in cifs_tree_connect().
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In some DFS setups, a single DFS share may contain hundreds of DFS
links and increasing the DFS cache to allow more referrals to be
cached improves DFS failover as the client will likely find a cached
DFS referral when reconnecting and then avoiding unnecessary remounts.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A race condition exists between SMB request handling in
`ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the
workqueue handler `handle_ksmbd_work()`. This leads to a UAF.
- KASAN: slab-use-after-free Read in handle_ksmbd_work
- KASAN: slab-use-after-free in rtlock_slowlock_locked
This race condition arises as follows:
- `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero:
`wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);`
- Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using
`atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls
`ksmbd_conn_free()`, which frees `conn`.
- However, after `handle_ksmbd_work()` decrements `conn->r_count`,
it may still access `conn->r_count_q` in the following line:
`waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)`
This results in a UAF, as `conn` has already been freed.
The discovery of this UAF can be referenced in the following PR for
syzkaller's support for SMB requests.
Link: https://github.com/google/syzkaller/pull/5524
Fixes: ee426bfb9d ("ksmbd: add refcnt to ksmbd_conn struct")
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org # v6.6.55+, v6.10.14+, v6.11.3+
Cc: syzkaller@googlegroups.com
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to know how many pending requests are left at the end of server
shutdown. That means we need to know how long the server will wait
to process pending requests in case of a server shutdown.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add netdev-up/down event debug print to find what netdev is connected or
disconnected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add debug prints to know what smb2 requests were received.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add debug print to know if netdevice is RDMA-capable network adapter.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
use msleep instaed of schedule_timeout_interruptible()
to guarantee the task delays as expected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Prefer to report ENOMEM rather than incur the oom for allocations in
ksmbd. __GFP_NORETRY could not achieve that, It would fail the allocations
just too easily. __GFP_RETRY_MAYFAIL will keep retrying the allocation
until there is no more progress and fail the allocation instead go OOM
and let the caller to deal with it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB1 NT_TRANSACT_IOCTL/FSCTL_GET_REPARSE_POINT even in non-UNICODE mode
returns reparse buffer in UNICODE/UTF-16 format.
This is because FSCTL_GET_REPARSE_POINT is NT-based IOCTL which does not
distinguish between 8-bit non-UNICODE and 16-bit UNICODE modes and its path
buffers are always encoded in UTF-16.
This change fixes reading of native symlinks in SMB1 when UNICODE session
is not active.
Fixes: ed3e0a149b ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
WSL socket, fifo, char and block devices have empty reparse buffer.
Validate the length of the reparse buffer.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
$LXDEV xattr is for storing block/char device's major and minor number.
Change guard which excludes storing $LXDEV xattr to explicitly filter
everything except block and char device. Current guard is opposite, which
is currently correct but is less-safe. This change is required for adding
support for creating WSL-style symlinks as symlinks also do not use
device's major and minor numbers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux CIFS client currently does not implement readlink() for WSL-style
symlinks. It is only able to detect that file is of WSL-style symlink, but
is not able to read target symlink location.
Add this missing functionality and implement support for parsing content of
WSL-style symlink.
The important note is that symlink target location stored for WSL symlink
reparse point (IO_REPARSE_TAG_LX_SYMLINK) is in UTF-8 encoding instead of
UTF-16 (which is used in whole SMB protocol and also in all other symlink
styles). So for proper locale/cp support it is needed to do conversion from
UTF-8 to local_nls.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check that path buffer has correct length (it is non-zero and in UNICODE
mode it has even number of bytes) and check that buffer does not contain
null character (UTF-16 null codepoint in UNICODE mode or null byte in
non-unicode mode) because Linux cannot process symlink with null byte.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB symlink which has SYMLINK_FLAG_RELATIVE set is relative (as opposite of
the absolute) and it can be relative either to the current directory (where
is the symlink stored) or relative to the top level export path. To what it
is relative depends on the first character of the symlink target path.
If the first character is path separator then symlink is relative to the
export, otherwise to the current directory. Linux (and generally POSIX
systems) supports only symlink paths relative to the current directory
where is symlink stored.
Currently if Linux SMB client reads relative SMB symlink with first
character as path separator (slash), it let as is. Which means that Linux
interpret it as absolute symlink pointing from the root (/). But this
location is different than the top level directory of SMB export (unless
SMB export was mounted to the root) and thefore SMB symlinks relative to
the export are interpreted wrongly by Linux SMB client.
Fix this problem. As Linux does not have equivalent of the path relative to
the top of the mount point, convert such symlink target path relative to
the current directory. Do this by prepending "../" pattern N times before
the SMB target path, where N is the number of path separators found in SMB
symlink path.
So for example, if SMB share is mounted to Linux path /mnt/share/, symlink
is stored in file /mnt/share/test/folder1/symlink (so SMB symlink path is
test\folder1\symlink) and SMB symlink target points to \test\folder2\file,
then convert symlink target path to Linux path ../../test/folder2/file.
Deduplicate code for parsing SMB symlinks in native form from functions
smb2_parse_symlink_response() and parse_reparse_native_symlink() into new
function smb2_parse_native_symlink() and pass into this new function a new
full_path parameter from callers, which specify SMB full path where is
symlink stored.
This change fixes resolving of the native Windows symlinks relative to the
top level directory of the SMB share.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 8da33fd11c ("cifs: avoid deadlocks while updating iface")
cifs_chan_update_iface now takes the chan_lock itself, so update the
comment accordingly.
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change return value from -ENOENT to -EOPNOTSUPP to maintain consistency
with the return value of open_cached_dir() for the same case. This
change is safe as the only calling function does not differentiate
between these return values.
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting dir_cache_timeout to zero should disable the caching of
directory contents. Currently, even when dir_cache_timeout is zero,
some caching related functions are still invoked, which is unintended
behavior.
Fix the issue by setting tcon->nohandlecache to true when
dir_cache_timeout is zero, ensuring that directory handle caching
is properly disabled.
Fixes: 238b351d09 ("smb3: allow controlling length of time directory entries are cached with dir leases")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Checks inside open_cached_dir() can be removed because if dir caching is
disabled then tcon->cfids is necessarily NULL. Therefore, all other checks
are redundant.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=K4Ai
-----END PGP SIGNATURE-----
Merge tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix two SMB3.1.1 POSIX Extensions problems
- Fixes for special file handling (symlinks and FIFOs)
- Improve compounding
- Four cleanup patches
- Fix use after free in signing
- Add support for handling namespaces for reconnect related upcalls
(e.g. for DNS names resolution and auth)
- Fix various directory lease problems (directory entry caching),
including some important potential use after frees
* tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: prevent use-after-free due to open_cached_dir error paths
smb: Don't leak cfid when reconnect races with open_cached_dir
smb: client: handle max length for SMB symlinks
smb: client: get rid of bounds check in SMB2_ioctl_init()
smb: client: improve compound padding in encryption
smb3: request handle caching when caching directories
cifs: Recognize SFU char/block devices created by Windows NFS server on Windows Server <<2012
CIFS: New mount option for cifs.upcall namespace resolution
smb/client: Prevent error pointer dereference
fs/smb/client: implement chmod() for SMB3 POSIX Extensions
smb: cached directories can be more than root file handle
smb: client: fix use-after-free of signing key
smb: client: Use str_yes_no() helper function
smb: client: memcpy() with surrounding object base address
cifs: Remove pre-historic unused CIFSSMBCopy
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_set_next_command() no longer squashes request iovs into a single
iov, so the bounds check can be dropped.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After commit f7f291e14d ("cifs: fix oops during encryption"), the
encryption layer can handle vmalloc'd buffers as well as kmalloc'd
buffers, so there is no need to inefficiently squash request iovs
into a single one to handle padding in compound requests.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows NFS server versions on Windows Server older than 2012 release use
for storing char and block devices modified SFU format, not compatible with
the original SFU. Windows NFS server on Windows Server 2012 and new
versions use different format (reparse points), not related to SFU-style.
SFU / SUA / Interix subsystem stores the major and major numbers as pair of
64-bit integer, but Windows NFS server stores as pair of 32-bit integers.
Which makes char and block devices between Windows NFS server <<2012 and
Windows SFU/SUA/Interix subsytem incompatible.
So improve Linux SMB client.
When SFU mode is enabled (mount option -o sfu is specified) then recognize
also these kind of char and block devices and its major and minor numbers,
which are used by Windows Server versions older than 2012.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
