Add a new channel type representing if the user's attention state to the
the system. This usually means if the user is looking at the screen or
not.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20241101-hpd-v3-3-e9c80b7c7164@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The integration time of the veml6070 depends on an external resistor
(called Rset in the datasheet) and the value configured in the IT
field of the command register, whose supported values are 1/2x, 1x,
2x and 4x.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241031-veml6070-integration-time-v4-2-c66da6788256@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_iio_device_register to automatically free the iio device.
since this is the last remaining resource that was not automatically
freed, we can drop the ".remove" callback.
Suggested-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Link: https://patch.msgid.link/20241031071746.848694-7-ahaslam@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify probe by using of the devm_regulator_get_enable_read_voltage.
Suggested-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Link: https://patch.msgid.link/20241031071746.848694-6-ahaslam@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7591 has reset, clr and ldac gpios. For the DAC to output data
continuously written to the data register the state of these gpios needs
to be set by the driver.
Add these gpios to the driver making them optional in case they are fixed
on the pcb.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Link: https://patch.msgid.link/20241031071746.848694-5-ahaslam@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include a chip info struct in device SPI and device OF match tables to
provide channel definitions for each particular ADC model and drop
device enum.
Suggested-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Link: https://patch.msgid.link/20241031071746.848694-4-ahaslam@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change to obtain the fdt use case as reported in the
adi,ad3552r.yaml file in this patchset.
The DAC device is defined as a child node of the backend.
Registering the child fdt node as a platform devices.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-8-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add High Speed ad3552r platform driver.
The ad3552r DAC is controlled by a custom (fpga-based) DAC IP
through the current AXI backend, or similar alternative IIO backend.
Compared to the existing driver (ad3552r.c), that is a simple SPI
driver, this driver is coupled with a DAC IIO backend that finally
controls the ad3552r by a fpga-based "QSPI+DDR" interface, to reach
maximum transfer rate of 33MUPS using dma stream capabilities.
All commands involving QSPI bus read/write are delegated to the backend
through the provided APIs for bus read/write.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-7-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the fwnode_iio_channel_get_by_name(), iterating over parent nodes to
acquire IIO channels via fwnode_for_each_parent_node(). The variable
chan was mistakenly attempted on the original node instead of the
current parent node. This patch corrects the logic to ensure that
__fwnode_iio_channel_get_by_name() is called with the correct parent
node.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 1e64b9c5f9a0 ("iio: inkern: move to fwnode properties")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241102092525.2389952-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adxl380_read_chn function returns either a negative value in case an
error occurs or the actual sample.
Check only for negative values after a channel is read.
Fixes: df36de13677a ("iio: accel: add ADXL380 driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20241101095202.20121-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep
is removed. Variables (arrays) that was used to call ad3552r_field_prep
are removed too.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-5-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend AXI-DAC backend with new features required to interface
to the ad3552r DAC. Mainly, a new compatible string is added to
support the ad3552r-axi DAC IP, very similar to the generic DAC
IP but with some customizations to work with the ad3552r.
Then, a series of generic functions has been added to match with
ad3552r needs. Function names has been kept generic as much as
possible, to allow re-utilization from other frontend drivers.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-4-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend backend features with new calls needed later on this
patchset from axi version of ad3552r.
The follwoing calls are added:
iio_backend_ddr_enable()
enable ddr bus transfer
iio_backend_ddr_disable()
disable ddr bus transfer
iio_backend_data_stream_enable()
enable data stream over bus interface
iio_backend_data_stream_disable()
disable data stream over bus interface
iio_backend_data_transfer_addr()
define the target register address where the DAC sample
will be written.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-3-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use local s16 variable for the temperature channel to avoid casting it
later before passing it to the bme680_read_temp() function. This way,
possible endianness and initialization issues are avoided.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241030235424.214935-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 371f778b83cd ("iio: adc: add support for pac1921")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20241030162013.2100253-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 938fd562b974 ("iio: adc: Add support for AD4000")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241030162013.2100253-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds support for the Bosch BMI260 6-axis IMU to the Bosch BMI270
driver. Setup and operation is nearly identical to the Bosch BMI270,
but has a different chip ID and requires different firmware.
Firmware is requested and loaded from userspace.
Adds ACPI ID BMI0160, used by several devices including the GPD Win
Mini, Aya Neo AIR Pro, and OXP Mini Pro.
GPD Win Mini:
Device (BMI2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "BMI0160") // _HID: Hardware ID
Name (_CID, "BMI0160") // _CID: Compatible ID
Name (_DDN, "Accelerometer") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0068, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CB",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, Exclusive, PullDefault, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x008B
}
})
Return (RBUF) /* \_SB_.I2CB.BMI2._CRS.RBUF */
}
...
}
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241027172029.160134-5-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the IIO specific scaling measurement units from the read functions
and add them inside the ->read_raw() function to keep the read_*() generic.
This way they can be used in other parts of the driver.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241021195316.58911-8-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix indentation issues, line breaking and unnecessary spaces
reported by checkpatch.pl. Reduce type casts by defining constants
to be LL.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241021195316.58911-7-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename camel case variable, as checkpatch.pl complains.
While at it, fix also the indentation of the array for readability.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241021195316.58911-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
According to datasheet's Section 1.1, Table 1, the startup time for the
device is 2ms and not 5ms.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241021195316.58911-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the linux/regmap.h header since the struct regmap_config is used
in this file.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241021195316.58911-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Vishay veml3235 is a low-power ambient light sensor with I2C
interface. It provides a minimum detectable intensity of
0.0021 lx/cnt, configurable integration time and gain, and an additional
white channel to distinguish between different light sources.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241023-veml3235-v3-2-8490f2622f9a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop use of the driver remove callbacks in the ad5380 driver.
By making use of a few more devm_ helpers, we can avoid the need for
remove callbacks entirely.
Also make use of dev_err_probe() while at it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241023-iio-regulator-refactor-round-5-v1-2-d0bd396b3f50@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to the write_event_config
callback.
Remove useless code in write_event_config callback.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-6-7d29e5a31b00@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to the write_event_config
callback.
Remove useless code in write_event_config callback.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-5-7d29e5a31b00@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to the write_event_config
callback.
Remove useless code in write_event_config callback.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-4-7d29e5a31b00@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to the write_event_config
callback.
Remove useless code in write_event_config callback.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-3-7d29e5a31b00@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to the write_event_config
callback.
Remove useless code in write_event_config callback.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241024-iio-fix-write-event-config-signature-v1-1-7d29e5a31b00@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO core (ACPI part) provides a generic helper that may be used in
the driver. Replace a variant of iio_get_acpi_device_name_and_data().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-25-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The commits in question do not proove that ACPI IDs exist.
Quite likely it was a cargo cult addition while doing that
for DT-based enumeration. Drop most likely fake ACPI IDs.
The to be removed IDs has been checked against the following resources:
1) DuckDuckGo
2) Google
3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx
This gives no useful results in regard to DSDT, moreover, the official
vendor ID in the registry for Lite-On is LCI.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-23-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
