Workloads using provided buffers benefit from using and returning buffers
in the right order, and so does TLBs for that matter. Manage the internal
buffer list in a straight list, rather than use the head buffer as the
insertion node. Use a hashed list for the buffer group IDs instead of
xarray, the overhead is much lower this way. xarray provides internal
locking and other trickery that is handy for some uses cases, but
io_uring already locks internally for the buffer manipulation and needs
none of that.
This is good for about a 2% reduction in overhead, combination of the
improved management and the fact that the workload has an easier time
bundling back provided buffers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add ->has_evfd flag, which is true IFF there is an eventfd attached, and
use it to hide io_eventfd_signal() into __io_commit_cqring_flush() and
combine fast checks in a single if. Also, gcc 11.2 wasn't inlining
io_cqring_ev_posted() without this change, so helps with that as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f6168471997decded475a063f92915787975a30b.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_commit_cqring() is currently always under spinlock section, so it's
always better to keep it as slim as possible. Move
__io_commit_cqring_flush() out of it into ev_posted*(). If fast checks
do fail and this post-processing is required, we'll reacquire
->completion_lock, which is fine as we don't care about performance of
draining and offset timeouts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ec4e81fd720d3bc7bca8cb9152e080dad1a052f1.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smp_mb() in io_cqring_ev_posted_iopoll() is only there because of
waitqueue_active(). However, non-SQPOLL IOPOLL ring doesn't wake the CQ
and so the barrier there is useless. Kill it, it's usually pretty
expensive.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d72e8ef6f7a3f6a72e18fad8409f7d47afc8da7d.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's never a good idea to put provided buffers without notifying the
userspace, it'll lead to userspace leaks, so add io_put_kbuf() in
io_req_complete_failed(). The fail helper is called by all sorts of
requests, but it's still safe to do as io_put_kbuf() will return 0 in
for all requests that don't support and so don't expect provided buffers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a4880106fcf199d5810707fe2d17126fcdf18bc4.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_fill_cqe*() is not always the best way to post CQEs just because
there is enough of infrastructure on top. Replace a raw call to a
variant of it inside of io_timeout_cancel(), which also saves us some
bloating and might help with batching later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/46113ec4345764b4aef3b384ce38cceabaeedcbb.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With commit "io_uring: cache req->apoll->events in req->cflags" applied,
we now have just io_poll_remove_entries() dipping into req->apoll when
it isn't strictly necessary.
Mark poll and double-poll with a flag, so we know if we need to look
at apoll->double_poll. This avoids pulling in those cachelines if we
don't need them. The common case is that the poll wake handler already
removed these entries while hot off the completion path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we arm poll on behalf of a different type of request, like a network
receive, then we allocate req->apoll as our poll entry. Running network
workloads shows io_poll_check_events() as the most expensive part of
io_uring, and it's all due to having to pull in req->apoll instead of
just the request which we have hot already.
Cache poll->events in req->cflags, which isn't used until the request
completes anyway. This isn't strictly needed for regular poll, where
req->poll.events is used and thus already hot, but for the sake of
unification we do it all around.
This saves 3-4% of overhead in certain request workloads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This serves two purposes:
- We now have the last cacheline mostly unused for generic workloads,
instead of having to pull in the poll refs explicitly for workloads
that rely on poll arming.
- It shrinks the io_kiocb from 232 to 224 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Particularly for networked workloads, io_uring intensively uses its
poll based backend to get a notification when data/space is available.
Profiling workloads, we see 3-4% of alloc+free that is directly attributed
to just the apoll allocation and free (and the rest being skb alloc+free).
For the fast path, we have ctx->uring_lock held already for both issue
and the inline completions, and we can utilize that to avoid any extra
locking needed to have a basic recycling cache for the apoll entries on
both the alloc and free side.
Double poll still requires an allocation. But those are rare and not
a fast path item.
With the simple cache in place, we see a 3-4% reduction in overhead for
the workload.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Julia and the kernel test robot report that the prep handling for this
command inadvertently checks one field twice:
fs/io_uring.c:4338:42-56: duplicated argument to && or ||
Get rid of it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 4f57f06ce218 ("io_uring: add support for IORING_OP_MSG_RING command")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.
Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are a small handful of reasons besides pending signals that the
kernel might want to break out of interruptible sleeps. The flag
TIF_NOTIFY_SIGNAL and the helpers that set and clear TIF_NOTIFY_SIGNAL
provide that the infrastructure for breaking out of interruptible
sleeps and entering the return to user space slow path for those
cases.
Expand tracehook_notify_signal inline in it's callers and remove it,
which makes clear that TIF_NOTIFY_SIGNAL and task_work are separate
concepts.
Update the comment on set_notify_signal to more accurately describe
it's purpose.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-9-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
By default, io_uring will stop submitting a batch of requests if we run
into an error submitting a request. This isn't strictly necessary, as
the error result is passed out-of-band via a CQE anyway. And it can be
a bit confusing for some applications.
Provide a way to setup a ring that will continue submitting on error,
when the error CQE has been posted.
There's still one case that will break out of submission. If we fail
allocating a request, then we'll still return -ENOMEM. We could in theory
post a CQE for that condition too even if we never got a request. Leave
that for a potential followup.
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wrap the test of task->task_works in a helper function to make
it clear what is being tested.
All of the other readers of task->task_work use READ_ONCE and this is
even necessary on current as other processes can update
task->task_work. So for consistency I have added READ_ONCE into
task_work_pending.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If we are using provided buffers, it's less than useful to have a buffer
selected and pinned if a request needs to go async or arms poll for
notification trigger on when we can process it.
Recycle the buffer in those events, so we don't pin it for the duration
of the request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the logic in io_read() deals with regular files, and in some ways
it would make sense to split the handling into S_IFREG and others. But
at least for retry, we don't need to bother setting up a bunch of state
just to abort in the loop later. In particular, don't bother forcing
setup of async data for a normal non-vectored read when we don't need it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the key architectual tenets is to keep the parameters for
io-uring stable. After the call has been submitted, its value can
be changed. Unfortunaltely this is not the case for the current statx
implementation.
IO-Uring change:
This changes replaces the const char * filename pointer in the io_statx
structure with a struct filename *. In addition it also creates the
filename object during the prepare phase.
With this change, the opcode also needs to invoke cleanup, so the
filename object gets freed after processing the request.
fs change:
This replaces the const char* __user filename parameter in the two
functions do_statx and vfs_statx with a struct filename *. In addition
to be able to correctly construct a filename object a new helper
function getname_statx_lookup_flags is introduced. The function makes
sure that do_statx and vfs_statx is invoked with the correct lookup flags.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220225185326.1373304-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sqpoll thread can be used for performing the napi busy poll in a
similar way that it does io polling for file systems supporting direct
access bypassing the page cache.
The other way that io_uring can be used for napi busy poll is by
calling io_uring_enter() to get events.
If the user specify a timeout value, it is distributed between polling
and sleeping by using the systemwide setting
/proc/sys/net/core/busy_poll.
The changes have been tested with this program:
https://github.com/lano1106/io_uring_udp_ping
and the result is:
Without sqpoll:
NAPI busy loop disabled:
rtt min/avg/max/mdev = 40.631/42.050/58.667/1.547 us
NAPI busy loop enabled:
rtt min/avg/max/mdev = 30.619/31.753/61.433/1.456 us
With sqpoll:
NAPI busy loop disabled:
rtt min/avg/max/mdev = 42.087/44.438/59.508/1.533 us
NAPI busy loop enabled:
rtt min/avg/max/mdev = 35.779/37.347/52.201/0.924 us
Co-developed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/810bd9408ffc510ff08269e78dca9df4af0b9e4e.1646777484.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for IORING_OP_MSG_RING, which allows an SQE to signal
another ring. That allows either waking up someone waiting on the ring,
or even passing a 64-bit value via the user_data field in the CQE.
sqe->fd must contain the fd of a ring that should receive the CQE.
sqe->off will be propagated to the cqe->user_data on the target ring,
and sqe->len will be propagated to cqe->res. The results CQE will have
IORING_CQE_F_MSG set in its flags, to indicate that this CQE was generated
from a messaging request rather than a SQE issued locally on that ring.
This effectively allows passing a 64-bit and a 32-bit quantify between
the two rings.
This request type has the following request specific error cases:
- -EBADFD. Set if the sqe->fd doesn't point to a file descriptor that is
of the io_uring type.
- -EOVERFLOW. Set if we were not able to deliver a request to the target
ring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In testing high frequency workloads with provided buffers, we spend a
lot of time in allocating and freeing the buffer units themselves.
Rather than repeatedly free and alloc them, add a recycling cache
instead. There are two caches:
- ctx->io_buffers_cache. This is the one we grab from in the submission
path, and it's protected by ctx->uring_lock. For inline completions,
we can recycle straight back to this cache and not need any extra
locking.
- ctx->io_buffers_comp. If we're not under uring_lock, then we use this
list to recycle buffers. It's protected by the completion_lock.
On adding a new buffer, check io_buffers_cache. If it's empty, check if
we can splice entries from the io_buffers_comp_cache.
This reduces about 5-10% of overhead from provided buffers, bringing it
pretty close to the non-provided path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lots of workloads use multiple threads, in which case the file table is
shared between them. This makes getting and putting the ring file
descriptor for each io_uring_enter(2) system call more expensive, as it
involves an atomic get and put for each call.
Similarly to how we allow registering normal file descriptors to avoid
this overhead, add support for an io_uring_register(2) API that allows
to register the ring fds themselves:
1) IORING_REGISTER_RING_FDS - takes an array of io_uring_rsrc_update
structs, and registers them with the task.
2) IORING_UNREGISTER_RING_FDS - takes an array of io_uring_src_update
structs, and unregisters them.
When a ring fd is registered, it is internally represented by an offset.
This offset is returned to the application, and the application then
uses this offset and sets IORING_ENTER_REGISTERED_RING for the
io_uring_enter(2) system call. This works just like using a registered
file descriptor, rather than a real one, in an SQE, where
IOSQE_FIXED_FILE gets set to tell io_uring that we're using an internal
offset/descriptor rather than a real file descriptor.
In initial testing, this provides a nice bump in performance for
threaded applications in real world cases where the batch count (eg
number of requests submitted per io_uring_enter(2) invocation) is low.
In a microbenchmark, submitting NOP requests, we see the following
increases in performance:
Requests per syscall Baseline Registered Increase
----------------------------------------------------------------
1 ~7030K ~8080K +15%
2 ~13120K ~14800K +13%
4 ~22740K ~25300K +11%
Co-developed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a slight optimisation to be had by calculating the correct pos
pointer inside io_kiocb_update_pos and then using that later.
It seems code size drops by a bit:
000000000000a1b0 0000000000000400 t io_read
000000000000a5b0 0000000000000319 t io_write
vs
000000000000a1b0 00000000000003f6 t io_read
000000000000a5b0 0000000000000310 t io_write
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update kiocb->ki_pos at execution time rather than in io_prep_rw().
io_prep_rw() happens before the job is enqueued to a worker and so the
offset might be read multiple times before being executed once.
Ensures that the file position in a set of _linked_ SQEs will be only
obtained after earlier SQEs have completed, and so will include their
incremented file position.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb_ppos is called in both branches, and it seems that the compiler
does not fuse this. Fusing removes a few bytes from loop_rw_iter.
Before:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 0000000000000124 t loop_rw_iter
After:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 000000000000010d t loop_rw_iter
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This makes the io-uring tracepoints consistent. Where it makes sense
the tracepoints start with the following four fields:
- context (ring)
- request
- user_data
- opcode.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-3-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This introduces the __fill_cqe function. This is necessary
to correctly issue the io_uring_complete tracepoint.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clang warns:
fs/io_uring.c:9396:9: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
return ret;
^~~
fs/io_uring.c:9373:13: note: initialize the variable 'ret' to silence this warning
int fd, ret;
^
= 0
1 warning generated.
Just return 0 directly and reduce the scope of ret to the if statement,
as that is the only place that it is used, which is how the function was
before the fixes commit.
Fixes: 1a75fac9a0f9 ("io_uring: avoid ring quiesce while registering/unregistering eventfd")
Link: https://github.com/ClangBuiltLinux/linux/issues/1579
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220207162410.1013466-1-nathan@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the opcodes in io_uring_register use ring quiesce anymore. Hence
io_register_op_must_quiesce always returns false and io_ctx_quiesce is
never called.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-6-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_R_DISABLED prevents submitting requests and so there will be
no requests until IORING_REGISTER_ENABLE_RINGS is called. And
IORING_REGISTER_RESTRICTIONS works only before
IORING_REGISTER_ENABLE_RINGS is called. Hence ring quiesce is not needed
for these opcodes.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-5-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done using the RCU data structure (io_ev_fd). eventfd_async is
moved from io_ring_ctx to io_ev_fd which is RCU protected hence avoiding
ring quiesce which is much more expensive than an RCU lock. The place
where eventfd_async is read is already under rcu_read_lock so there is no
extra RCU read-side critical section needed.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-4-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done by creating a new RCU data structure (io_ev_fd) as part of
io_ring_ctx that holds the eventfd_ctx.
The function io_eventfd_signal is executed under rcu_read_lock with a
single rcu_dereference to io_ev_fd so that if another thread unregisters
the eventfd while io_eventfd_signal is still being executed, the
eventfd_signal for which io_eventfd_signal was called completes
successfully.
The process of registering/unregistering eventfd is already done under
uring_lock so multiple threads won't enter a race condition while
registering/unregistering eventfd.
With the above approach ring quiesce can be avoided which is much more
expensive then using RCU lock. On the system tested, io_uring_register
with IORING_REGISTER_EVENTFD takes less than 1ms with RCU lock, compared
to 15ms before with ring quiesce.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-3-usama.arif@bytedance.com
[axboe: long line fixups]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The information on whether eventfd is registered is not very useful and
would result in the tracepoint being enclosed in an rcu_readlock in a
later patch that tries to avoid ring quiesce for registering eventfd.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-2-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This field is entirely unused now except for a tracepoint in f2fs, so
remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220308060529.736277-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_rsrc_ref_quiesce will unlock the uring while it waits for references to
the io_rsrc_data to be killed.
There are other places to the data that might add references to data via
calls to io_rsrc_node_switch.
There is a race condition where this reference can be added after the
completion has been signalled. At this point the io_rsrc_ref_quiesce call
will wake up and relock the uring, assuming the data is unused and can be
freed - although it is actually being used.
To fix this check in io_rsrc_ref_quiesce if a resource has been revived.
Reported-by: syzbot+ca8bf833622a1662745b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220222161751.995746-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application calls io_uring_enter(2) with a timespec passed in,
convert that timespec to ktime_t rather than jiffies. The latter does
not provide the granularity the application may expect, and may in
fact provided different granularity on different systems, depending
on what the HZ value is configured at.
Turn the timespec into an absolute ktime_t, and use that with
schedule_hrtimeout() instead.
Link: https://github.com/axboe/liburing/issues/531
Cc: stable@vger.kernel.org
Reported-by: Bob Chen <chenbo.chen@alibaba-inc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On an overcommitted system which is running multiple workloads of
varying priorities, it is preferred to trigger an oom-killer to kill a
low priority workload than to let the high priority workload receiving
ENOMEMs. On our memory overcommitted systems, we are seeing a lot of
ENOMEMs instead of oom-kills because io_uring_setup callchain is using
__GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and
allow the oom-killer to kill a lower priority job.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20220125051736.2981459-1-shakeelb@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_recv(), if import_single_range() fails, the @flags variable is
uninitialized, then it will goto out_free.
After the goto, the compiler doesn't know that (ret < min_ret) is
always true, so it thinks the "if ((flags & MSG_WAITALL) ..." path
could be taken.
The complaint comes from gcc-9 (Debian 9.3.0-22) 9.3.0:
```
fs/io_uring.c:5238 io_recvfrom() error: uninitialized symbol 'flags'
```
Fix this by bypassing the @ret and @flags check when
import_single_range() fails.
Reasons:
1. import_single_range() only returns -EFAULT when it fails.
2. At that point, @flags is uninitialized and shouldn't be read.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lore.gnuweeb.org/timl/d33bb5a9-8173-f65b-f653-51fc0681c6d6@intel.com/
Cc: Pavel Begunkov <asml.silence@gmail.com>
Suggested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Fixes: 7297ce3d59449de49d3c9e1f64ae25488750a1fc ("io_uring: improve send/recv error handling")
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gmail.com>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/20220207140533.565411-1-ammarfaizi2@gnuweeb.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some cases io_rsrc_ref_quiesce will call io_rsrc_node_switch_start,
and then immediately flush the delayed work queue &ctx->rsrc_put_work.
However the percpu_ref_put does not immediately destroy the node, it
will be called asynchronously via RCU. That ends up with
io_rsrc_node_ref_zero only being called after rsrc_put_work has been
flushed, and so the process ends up sleeping for 1 second unnecessarily.
This patch executes the put code immediately if we are busy
quiescing.
Fixes: 4a38aed2a0a7 ("io_uring: batch reap of dead file registrations")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220121123856.3557884-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An active work can have poll armed, hence it's not enough to just do
the async work removal and return the value if it's different from "not
found". Rather than make poll removal special, just fall through to do
the remaining type lookups and removals.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes a problem described in 50252e4b5e989
("aio: fix use-after-free due to missing POLLFREE handling")
and copies the approach used there.
In short, we have to forcibly eject a poll entry when we meet POLLFREE.
We can't rely on io_poll_get_ownership() as can't wait for potentially
running tw handlers, so we use the fact that wqs are RCU freed. See
Eric's patch and comments for more details.
Reported-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Reported-and-tested-by: syzbot+5426c7ed6868c705ca14@syzkaller.appspotmail.com
Fixes: 221c5eb233823 ("io_uring: add support for IORING_OP_POLL")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ed56b6f548f7ea337603a82315750449412748a.1642161259.git.asml.silence@gmail.com
[axboe: drop non-functional change from patch]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
