There used to be several offenders, but now that for all of them patches
were sent and most of them were applied, enable the warning also for
builds without W=1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
At first, I thought this script would be needed only in init/Makefile.
However, commit 5db8face97f8 ("kbuild: Restore .version auto-increment
behaviour for Debian packages") and commit 1789fc912541 ("kbuild:
rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg")
revealed that it was actually needed for scripts/package/mk* as well.
After all, scripts/ is a better place for it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Currently, sym_set_tristate_value() is used to set 'y' to a choice
member, which is confusing because it not only sets 'y' to the given
symbol but also tweaks flags of other symbols as a side effect.
Add a dedicated function for setting the value of the given choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The condition (t2 == 0) never becomes true because the zero value
(i.e., E_NONE) is only used as a dummy type for prevtoken. It can
be passed to t1, but not to t2.
The caller of this function only checks expr_compare_type() > 0.
Therefore, the distinction between 0 and -1 is unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
CONFIG_DEBUG_INFO_BTF=y requires one additional link step.
(.tmp_vmlinux.btf)
CONFIG_KALLSYMS=y requires two additional link steps.
(.tmp_vmlinux.kallsyms1 and .tmp_vmlinux.kallsyms2)
Enabling both requires three additional link steps.
When CONFIG_DEBUG_INFO_BTF=y and CONFIG_KALLSYMS=y, the current build
process is as follows:
KSYMS .tmp_vmlinux.kallsyms0.S
AS .tmp_vmlinux.kallsyms0.o
LD .tmp_vmlinux.btf # temporary vmlinux for BTF
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1 # temporary vmlinux for kallsyms step 1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux # final vmlinux
This is redundant because the BTF generation and the kallsyms step 1 can
be performed against the same temporary vmlinux.
When both CONFIG_DEBUG_INFO_BTF and CONFIG_KALLSYMS are enabled, we can
reduce the number of link steps by one.
This commit changes the build process as follows:
KSYMS .tmp_vmlinux0.kallsyms.S
AS .tmp_vmlinux0.kallsyms.o
LD .tmp_vmlinux1 # temporary vmlinux for BTF and kallsyms step 1
BTF .tmp_vmlinux1.btf.o
NM .tmp_vmlinux1.syms
KSYMS .tmp_vmlinux1.kallsyms.S
AS .tmp_vmlinux1.kallsyms.o
LD .tmp_vmlinux2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux2.syms
KSYMS .tmp_vmlinux2.kallsyms.S
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux # final vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
This reimplements commit 951bcae6c5a0 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Clean up the variables in scripts/link-vmlinux.sh
- Specify the extra objects directly in vmlinux_link()
- Move the AS rule to kallsyms()
- Set kallsymso and btf_vmlinux_bin_o where they are generated
- Remove unneeded variable, kallsymso_prev
- Introduce the btf_data variable
- Introduce the strip_debug flag instead of checking the output name
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reduce the indentation level by continue'ing the loop earlier
if (!sym || sym_is_choice(sym)).
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The outer switch statement can be avoided by continue'ing earlier the
loop when the symbol type is neither S_BOOLEAN nor S_TRISTATE.
Remove it to reduce the indentation level by one. In addition, avoid
the repetition of sym->def[S_DEF_USER].tri.
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
I previously submitted a fix for a bug in the choice feature [1], where
I mentioned, "Another (much cleaner) approach would be to remove the
tristate choice support entirely".
There are more issues in the tristate choice feature. For example, you
can observe a couple of bugs in the following test code.
[Test Code]
config MODULES
def_bool y
modules
choice
prompt "tristate choice"
default A
config A
tristate "A"
config B
tristate "B"
endchoice
Bug 1: the 'default' property is not correctly processed
'make alldefconfig' produces:
CONFIG_MODULES=y
# CONFIG_A is not set
# CONFIG_B is not set
However, the correct output should be:
CONFIG_MODULES=y
CONFIG_A=y
# CONFIG_B is not set
The unit test file, scripts/kconfig/tests/choice/alldef_expected_config,
is wrong as well.
Bug 2: choice members never get 'y' with randconfig
For the test code above, the following combinations are possible:
A B
(1) y n
(2) n y
(3) m m
(4) m n
(5) n m
(6) n n
'make randconfig' never produces (1) or (2).
These bugs are fixable, but a more critical problem is the lack of a
sensible syntax to specify the default for the tristate choice.
The default for the choice must be one of the choice members, which
cannot specify any of the patterns (3) through (6) above.
In addition, I have never seen it being used in a useful way.
The following commits removed unnecessary use of tristate choices:
- df8df5e4bc37 ("usb: get rid of 'choice' for legacy gadget drivers")
- bfb57ef0544a ("rapidio: remove choice for enumeration")
This commit removes the tristate choice support entirely, which allows
me to delete a lot of code, making further refactoring easier.
Note:
This includes the revert of commit fa64e5f6a35e ("kconfig/symbol.c:
handle choice_values that depend on 'm' symbols"). It was suspicious
because it did not address the root cause but introduced inconsistency
in visibility between choice members and other symbols.
[1]: https://lore.kernel.org/linux-kbuild/20240427104231.2728905-1-masahiroy@kernel.org/T/#m0a1bb6992581462ceca861b409bb33cb8fd7dbae
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit ee06a3ef7e3c ("kconfig: Update config changed flag before calling
callback") pointed out that conf_updated flag must be updated _before_
calling the callback, which needs to know the new value.
Given that, it makes sense to directly pass the new value to the
callback.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If any CONFIG option is changed while loading the .config file,
conf_read() calls conf_set_changed(true) and then the conf_changed()
callback.
With conf_read() moved after window initialization, the explicit
conf_changed() call can be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes: 659bbf7e1b08 ("kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use $(obj)/ instead of $(src)/ prefix when building C++ modules for
host, as explained in commit b1992c3772e6 ("kbuild: use $(src) instead
of $(srctree)/$(src) for source directory"). This fixes build failures
of 'xconfig':
$ make O=build/ xconfig
make[1]: Entering directory '/data/linux/kbuild-review/build'
GEN Makefile
make[3]: *** No rule to make target '../scripts/kconfig/qconf-moc.cc', needed by 'scripts/kconfig/qconf-moc.o'. Stop.
Fixes: b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Reported-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MODULES is disabled, 'make (bin)rpm-pkg' fails:
$ make allnoconfig binrpm-pkg
[ snip ]
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/kernel
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/modules.order
To make it work irrespective of CONFIG_MODULES, this commit specifies
the directory path, /lib/modules/%{KERNELRELEASE}, instead of individual
files.
However, doing so would cause new warnings:
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.devname
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.softdep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols.bin
These files exist in /lib/modules/%{KERNELRELEASE} and are also explicitly
marked as %ghost.
Suppress depmod because depmod-generated files are not packaged.
Fixes: 615b3a3d2d41 ("kbuild: rpm-pkg: do not include depmod-generated files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The make deb-pkg target calls debian-orig which attempts to either
hard link the source .tar to the build-output location or copy the
source .tar to the build-output location. The test to determine
whether to ln or cp is incorrectly expanded by Make and consequently
always attempts to ln the source .tar. This fix corrects the escaping
of '$' so that the test is expanded by the shell rather than by Make
and appropriately selects between ln and cp.
Fixes: b44aa8c96e9e ("kbuild: deb-pkg: make .orig tarball a hard link if possible")
Signed-off-by: Thayne Harbaugh <thayne@mastodonlabs.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The compiled dtb files aren't executable, so install them with 0644 as their
permission mode, instead of defaulting to 0755 for the permission mode and
installing them with the executable bits set.
Some Linux distributions, including Debian, [1][2][3] already include fixes
in their kernel package build recipes to change the dtb file permissions to
0644 in their kernel packages. These changes, when additionally propagated
into the long-term kernel versions, will allow such distributions to remove
their downstream fixes.
[1] https://salsa.debian.org/kernel-team/linux/-/merge_requests/642
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/749
[3] https://salsa.debian.org/kernel-team/linux/-/blob/debian/6.8.12-1/debian/rules.real#L193
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: <stable@vger.kernel.org>
Fixes: aefd80307a05 ("kbuild: refactor Makefile.dtbinst more")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
-----BEGIN PGP SIGNATURE-----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=RzRM
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
Building with W=1 incorrectly emits the following warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o
This check should apply only to modules.
Fixes: 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
In commit b18b047002b7 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.
The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.
Fixes: b18b047002b7 ("kbuild: change scripts/mksysmap into sed script")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
expr_trans_bool() performs an incorrect transformation.
[Test Code]
config MODULES
def_bool y
modules
config A
def_bool y
select C if B != n
config B
def_tristate m
config C
tristate
[Result]
CONFIG_MODULES=y
CONFIG_A=y
CONFIG_B=m
CONFIG_C=m
This output is incorrect because CONFIG_C=y is expected.
Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:
If the values of both symbols are equal, it returns 'n',
otherwise 'y'.
Therefore, the statement:
select C if B != n
should be equivalent to:
select C if y
Or, more simply:
select C
Hence, the symbol C should be selected by the value of A, which is 'y'.
However, expr_trans_bool() wrongly transforms it to:
select C if B
Therefore, the symbol C is selected by (A && B), which is 'm'.
The comment block of expr_trans_bool() correctly explains its intention:
* bool FOO!=n => FOO
^^^^
If FOO is bool, FOO!=n can be simplified into FOO. This is correct.
However, the actual code performs this transformation when FOO is
tristate:
if (e->left.sym->type == S_TRISTATE) {
^^^^^^^^^^
While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)
expr_trans_bool() is wrong and unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Currently, the initial state of the "Save" button is always active.
If none of the CONFIG options are changed while loading the .config
file, the "Save" button should be greyed out.
This can be fixed by calling conf_read() after widget initialization.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a leftover from commit ce1fc9345a59 ("kconfig: do not clear
SYMBOL_DEF_USER when the value is out of range").
This code is now redundant because if a user-supplied value is out
of range, the value adjusted by sym_validate_range() differs, and
conf_unsaved has already been incremented a few lines above.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.
Fixes: ad8110706f38 ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
The 'dt_binding_check' target shouldn't depend on the kernel
configuration, but it has since commit 604a57ba9781 ("dt-bindings:
kbuild: Add separate target/dependency for processed-schema.json").
That is because CHECK_DT_BINDING make variable was dropped, but
scripts/dtc/Makefile was missed. The CHECK_DTBS variable can be used
instead.
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
According to the FIT image source file format document found in U-boot [1]
and the split-out FIT image specification [2], under "'/images' node" ->
"Conditionally mandatory property", the "compatible" property is described
as "compatible method for loading image", i.e., not the compatible string
embedded in the FDT or used for matching.
Drop the compatible string from the fdt image entry node.
While at it also fix up a typo in the document section of output_dtb.
[1] U-boot source "doc/usage/fit/source_file_format.rst", or on the website:
https://docs.u-boot.org/en/latest/usage/fit/source_file_format.html
[2] https://github.com/open-source-firmware/flat-image-tree/blob/main/source/chapter2-source-file-format.rst
Fixes: 7a23b027ec17 ("arm64: boot: Support Flat Image Tree")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In convention, short logs print the output file, not the input file.
Let's change the suffix for 'AS' since it assembles *.S into *.o.
[Before]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The previous commit removed the subshell execution from scripts/mksysmap,
which is now simple enough to become a sed script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 951bcae6c5a0 ("kallsyms: Avoid weak references for kallsyms
symbols"), the kallsyms step 3 always occurs.
You can compare the build logs.
[Before 951bcae6c5a0]
$ git checkout 951bcae6c5a0^
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After 951bcae6c5a0]
$ git checkout 951bcae6c5a0
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD .tmp_vmlinux.kallsyms3 # should not happen
NM .tmp_vmlinux.kallsyms3.syms # should not happen
KSYMS .tmp_vmlinux.kallsyms3.S # should not happen
AS .tmp_vmlinux.kallsyms3.S # should not happen
LD vmlinux
The resulting vmlinux is correct, but it always requires an additional
linking step.
The symbols produced by kallsyms are excluded from kallsyms itself
because they were previously missing in step 1. With those symbols
excluded, the symbol lists matched between step 1 and step 2,
eliminating the need for step 3. Now, this has a negative effect.
Since 951bcae6c5a0, the PROVIDE() directives provide the fallback
definitions, which are not trimmed from the sysbol list in step 1
because ${kallsymso_prev} is empty at this point.
In step 2, ${kallsymso_prev} is set, and the kallsyms_* symbols are
trimmed from the symbol list.
Due to the table size difference between step 1 and step 2 (the former
is larger due to the presence of kallsyms_*), step 3 is triggered.
Now that the kallsyms_* symbols are always linked, let's stop omitting
them from kallsyms. This avoids unnecessary step 3.
Fixes: 951bcae6c5a0 ("kallsyms: Avoid weak references for kallsyms symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Recently we went through the source tree and replaced
$(srctree)/$(src) w/ $(src). However, the gdb scripts Makefile had a
hidden $(srctree)/$(src) that looked like this:
$(abspath $(srctree))/$(src)
Because we missed that then my installed kernel had symlinks that
looked like this:
__init__.py ->
${INSTALL_DIR}/$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Let's also replace the midden $(abspath $(srctree))/$(src) with
$(src). Now:
__init__.py ->
$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Fixes: b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The check for 'sym1 == sym2' is redundant here because it has already
been done a few lines above:
if (sym1 != sym2)
return NULL;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67bec0 ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This has not been used since commit e911503085ae ("Kconfig: Remove
bad inference rules expr_eliminate_dups2()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer AMD
GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
=EPi9
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
1, Select some options in Kconfig;
2, Give a chance to build with !CONFIG_SMP;
3, Switch to use built-in rustc target;
4, Add new supported device nodes to dts;
5, Some bug fixes and other small changes;
6, Update the default config file.
-----BEGIN PGP SIGNATURE-----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=WR15
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select some options in Kconfig
- Give a chance to build with !CONFIG_SMP
- Switch to use built-in rustc target
- Add new supported device nodes to dts
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add new supported device nodes to Loongson-2K2000
LoongArch: dts: Add new supported device nodes to Loongson-2K0500
LoongArch: dts: Remove "disabled" state of clock controller node
LoongArch: rust: Switch to use built-in rustc target
LoongArch: Fix callchain parse error with kernel tracepoint events again
LoongArch: Give a chance to build with !CONFIG_SMP
LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
LoongArch: Select ARCH_HAS_FAST_MULTIPLIER
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind
error for vDSO functions
- Create .build-id links for unstripped vDSO files to enable
vDSO debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames
to manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions
to reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also
use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to
document that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to
fix warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys
from stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers,
which can be used to deduplicate more or less identical IUCV
device allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device()
helpers to get rid of quite some code and also remove a
cast to an incompatible function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies
that the size of the to be patched code area is even. Convert
this to a compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008'
commands from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than
maximally allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead
of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe
reIPL block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which
were confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to
reduce code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools
such as dumpconf passing additional kernel command line parameters
to a stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during
compile when a unsupported opcode is used with __cpacf_query()
or __cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZkyx2BccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8PYZAP9KxEfTyUmIh61Gx8+m3BW5dy7p
E2Q8yotlUpGj49ul+AD8CEAyTiWR95AlMOVZZLV/0J7XIjhALvpKAGfiJWkvXgc=
=pife
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
One patch slightly improves the text in a comment.
The other patch (on minmax.cocci) removes a report about ? being used in
return statements that has been generating not very useful suggestions
to change idiomatic code.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----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=EDrr
-----END PGP SIGNATURE-----
Merge tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"One patch slightly improves the text in a comment.
The other patch (on minmax.cocci) removes a report about ? being used
in return statements that has been generating not very useful
suggestions to change idiomatic code"
* tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix grammar in comment
coccinelle: misc: minmax: Suppress reports for err returns
s/does not use unnecessary/do not unnecessarily use/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Most of the people prefer:
return ret < 0 ? ret: 0;
than:
return min(ret, 0);
Let's tweak the cocci file to ignore those lines completely.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
All known function cast warnings are now addressed, so the warning can be
enabled globally to catch new ones more quickly.
Link: https://lkml.kernel.org/r/20240415122037.1983124-6-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
