Otherwise we would dereference a NULL aggregator pointer when calling
__set_agg_ports_ready on the line below.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use signed integer in ipv6_skip_exthdr() called from nf_confirm().
Reported by static analysis tooling, patch from Florian Westphal.
2) Missing set type checks in nf_tables: Validate that set declaration
matches the an existing set type, otherwise bail out with EEXIST.
Currently, nf_tables silently accepts the re-declaration with a
different type but it bails out later with EINVAL when the user adds
entries to the set. This fix is relatively large because it requires
two preparation patches that are included in this batch.
3) Do not ignore updates of timeout and gc_interval parameters in
existing sets.
4) Fix a hang when 0/0 subnets is added to a hash:net,port,net type of
ipset. Except hash:net,port,net and hash:net,iface, the set types don't
support 0/0 and the auxiliary functions rely on this fact. So 0/0 needs
a special handling in hash:net,port,net which was missing (hash:net,iface
was not affected by this bug), from Jozsef Kadlecsik.
5) When adding/deleting large number of elements in one step in ipset,
it can take a reasonable amount of time and can result in soft lockup
errors. This patch is a complete rework of the previous version in order
to use a smaller internal batch limit and at the same time removing
the external hard limit to add arbitrary number of elements in one step.
Also from Jozsef Kadlecsik.
Except for patch #1, which fixes a bug introduced in the previous net-next
development cycle, anything else has been broken for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.
Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=+EpE
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of regression and regular fixes:
- regressions:
- fix error handling after conversion to qstr for paths
- fix raid56/scrub recovery caused by uninitialized variable
after conversion to error bitmaps
- restore qgroup backref lookup behaviour after recent
refactoring
- fix leak of device lists at module exit time
- fix resolving backrefs for inline extent followed by prealloc
- reset defrag ioctl buffer on memory allocation error"
* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix fscrypt name leak after failure to join log transaction
btrfs: scrub: fix uninitialized return value in recover_scrub_rbio
btrfs: fix resolving backrefs for inline extent followed by prealloc
btrfs: fix trace event name typo for FLUSH_DELAYED_REFS
btrfs: restore BTRFS_SEQ_LAST when looking up qgroup backref lookup
btrfs: fix leak of fs devices after removing btrfs module
btrfs: fix an error handling path in btrfs_defrag_leaves()
btrfs: fix an error handling path in btrfs_rename()
syzbot is reporting hung task at do_user_addr_fault() [1], for there is
a silent deadlock between PG_locked bit and ni_lock lock.
Since filemap_update_page() calls filemap_read_folio() after calling
folio_trylock() which will set PG_locked bit, ntfs_truncate() must not
call truncate_setsize() which will wait for PG_locked bit to be cleared
when holding ni_lock lock.
Link: https://lore.kernel.org/all/00000000000060d41f05f139aa44@google.com/
Link: https://syzkaller.appspot.com/bug?extid=bed15dbf10294aa4f2ae [1]
Reported-by: syzbot <syzbot+bed15dbf10294aa4f2ae@syzkaller.appspotmail.com>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After
b3e34a47f9 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments().
Fixes: b3e34a47f9 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.
That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.
If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.
Cc: Steve Dickson <steved@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777
Reported-by: JianHong Yin <yin-jianhong@163.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
This explodes the build if HEAD is signed, since the generated version
is gpg: Signature made Mon 26 Dec 2022 20:34:48 CET, then a few more
lines, then the SHA.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/7c9637711271f50ec2341fb8a7c29585335dab04.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.
drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.
Fixes: 94dfec48fc ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de
Tested-by: Ian Ray <ian.ray@ge.com>
(cherry picked from commit 4333472f8d)
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Commands such as kmem, kwork, lock, sched, trace and timechart depend on
libtraceevent, these commands need to be isolated using HAVE_LIBTRACEEVENT
macro when cmdlist generation.
The output of the generate-cmdlist.sh script is as follows:
# ./util/generate-cmdlist.sh
/* Automatically generated by ./util/generate-cmdlist.sh */
struct cmdname_help
{
char name[16];
char help[80];
};
static struct cmdname_help common_cmds[] = {
{"annotate", "Read perf.data (created by perf record) and display annotated code"},
{"archive", "Create archive with object files with build-ids found in perf.data file"},
{"bench", "General framework for benchmark suites"},
{"buildid-cache", "Manage build-id cache."},
{"buildid-list", "List the buildids in a perf.data file"},
{"c2c", "Shared Data C2C/HITM Analyzer."},
{"config", "Get and set variables in a configuration file."},
{"daemon", "Run record sessions on background"},
{"data", "Data file related processing"},
{"diff", "Read perf.data files and display the differential profile"},
{"evlist", "List the event names in a perf.data file"},
{"ftrace", "simple wrapper for kernel's ftrace functionality"},
{"inject", "Filter to augment the events stream with additional information"},
{"iostat", "Show I/O performance metrics"},
{"kallsyms", "Searches running kernel for symbols"},
{"kvm", "Tool to trace/measure kvm guest os"},
{"list", "List all symbolic event types"},
{"mem", "Profile memory accesses"},
{"record", "Run a command and record its profile into perf.data"},
{"report", "Read perf.data (created by perf record) and display the profile"},
{"script", "Read perf.data (created by perf record) and display trace output"},
{"stat", "Run a command and gather performance counter statistics"},
{"test", "Runs sanity tests."},
{"top", "System profiling tool."},
{"version", "display the version of perf binary"},
#ifdef HAVE_LIBELF_SUPPORT
{"probe", "Define new dynamic tracepoints"},
#endif /* HAVE_LIBELF_SUPPORT */
#if defined(HAVE_LIBTRACEEVENT) && (defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT))
{"trace", "strace inspired tool"},
#endif /* HAVE_LIBTRACEEVENT && (HAVE_LIBAUDIT_SUPPORT || HAVE_SYSCALL_TABLE_SUPPORT) */
#ifdef HAVE_LIBTRACEEVENT
{"kmem", "Tool to trace/measure kernel memory properties"},
{"kwork", "Tool to trace/measure kernel work properties (latencies)"},
{"lock", "Analyze lock events"},
{"sched", "Tool to trace/measure scheduler properties (latencies)"},
{"timechart", "Tool to visualize total system behavior during a workload"},
#endif /* HAVE_LIBTRACEEVENT */
};
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221226085703.95081-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the definition of 'struct perf_sample' has been moved to sample.h,
we need to include this header file to fix the build error as follows:
arch/riscv/util/unwind-libdw.c: In function 'libdw__arch_set_initial_registers':
arch/riscv/util/unwind-libdw.c:12:50: error: invalid use of undefined type 'struct perf_sample'
12 | struct regs_dump *user_regs = &ui->sample->user_regs;
| ^~
Fixes: 9823147da6 ("perf tools: Move 'struct perf_sample' to a separate header file to disentangle headers")
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greentime.hu@sifive.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20221231052731.24908-1-eric.lin@sifive.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 62d89a7d49 ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:
[ 9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
[ 9.444502] matroxfb: cannot determine memory size
[ 9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1
So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.
While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.
Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.
Fixes: 62d89a7d49 ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
The virtio_gpu_object_shmem_init() will alloc memory and save it in
@ents, so when virtio_gpu_array_alloc() fails, this memory should be
freed, this patch fixes it.
Fixes: e7fef09233 ("drm/virtio: Simplify error handling of virtio_gpu_object_create()")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109091905.55451-1-xiujianfeng@huawei.com
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09 ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09 ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf09 titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09 brings it out earlier.
Handle /0 subnets properly in hash:net,port,net set types.
Fixes: 5f7b51bf09 ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'
Fixes: b74ef9f9cb ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix W=1 kernel-doc warning:
net/sched/sch_htb.c:214: warning: expecting prototype for htb_classify(). Prototype was for HTB_DIRECT() instead
by moving the HTB_DIRECT() macro above the function.
Add kernel-doc notation for function parameters as well.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim says:
====================
net: dont intepret cls results when asked to drop
It is possible that an error in processing may occur in tcf_classify() which
will result in res.classid being some garbage value. Example of such a code path
is when the classifier goes into a loop due to bad policy. See patch 1/2
for a sample splat.
While the core code reacts correctly and asks the caller to drop the packet
(by returning TC_ACT_SHOT) some callers first intepret the res.class as
a pointer to memory and end up dropping the packet only after some activity with
the pointer. There is likelihood of this resulting in an exploit. So lets fix
all the known qdiscs that behave this way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer
Fixes: b0188d4dbe ("[NET_SCHED]: sch_atm: Lindent")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When ceph releasing the file_lock it will try to get the inode pointer
from the fl->fl_file, which the memory could already be released by
another thread in filp_close(). Because in VFS layer the fl->fl_file
doesn't increase the file's reference counter.
Will switch to use ceph dedicate lock info to track the inode.
And in ceph_fl_release_lock() we should skip all the operations if the
fl->fl_u.ceph.inode is not set, which should come from the request
file_lock. And we will set fl->fl_u.ceph.inode when inserting it to the
inode lock list, which is when copying the lock.
Link: https://tracker.ceph.com/issues/57986
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the POSIX locks they are using the same owner, which is the
thread id. And multiple POSIX locks could be merged into single one,
so when checking whether the 'file' has locks may fail.
For a file where some openers use locking and others don't is a
really odd usage pattern though. Locks are like stoplights -- they
only work if everyone pays attention to them.
Just switch ceph_get_caps() to check whether any locks are set on
the inode. If there are POSIX/OFD/FLOCK locks on the file at the
time, we should set CHECK_FILELOCK, regardless of what fd was used
to set the lock.
Fixes: ff5d913dfc ("ceph: return -EIO if read/write against filp that lost file locks")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Having a bigger number of FIFO lines held after vsync is only useful to
SoCs using AFBC to give time to the AFBC decoder to be reset, configured
and enabled again.
For SoCs not using AFBC this, on the contrary, is causing on some
displays issues and a few pixels vertical offset in the displayed image.
Conditionally increase the number of lines held after vsync only for
SoCs using AFBC, leaving the default value for all the others.
Fixes: 24e0d4058e ("drm/meson: hold 32 lines after vsync to give time for AFBC start")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
If the user's login time is newer than the cache's timestamp,
we expect the cache may be stale and need to clear.
The stale cache will remain in the list's tail if no other
users operate on that inode.
Once the user accesses the inode, the stale cache will be
returned in rcu path.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
-----BEGIN PGP SIGNATURE-----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=M9iU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced by a
function in the .text section
-----BEGIN PGP SIGNATURE-----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=ZQnP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early
-----BEGIN PGP SIGNATURE-----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=0nPr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
As stated in marvell-orion-mdio.txt deleted in commit 0781434af8
("dt-bindings: net: orion-mdio: Convert to JSON schema") if
'interrupts' property is present, width of 'reg' should be 0x84.
Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add
constraints checking whether 'interrupts' property is present
and validate it against fixed values in reg.
Signed-off-by: Michał Grzelak <mig@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This property has always been supported by the Linux driver; see
commit 9f93ac8d40 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the
original driver submission includes the phy-supply code but no mention
of it in the binding, so the omission appears to be accidental. In
addition, the property is documented in the binding for the previous
hardware generation, allwinner,sun7i-a20-gmac.
Document phy-supply in the binding to fix devicetree validation for the
25+ boards that already use this property.
Fixes: 0441bde003 ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is now possible for a system to have more than 32 endpoints. As
a result, registers related to endpoint suspend are parameterized,
with 32 endpoints represented in one more registers.
In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register
offset is determined properly, but the bit mask used still assumes
the number of enpoints won't exceed 32. This is a bug. Fix it.
Fixes: f298ba785e ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin says:
====================
selftests: net: fix for arp_ndisc_evict_nocarrier test
This patchset will fix a false-positive issue caused by the command in
cleanup_v6() of the arp_ndisc_evict_nocarrier test.
Also, it will make the test to return a non-zero value for any failure
reported in the test for us to avoid false-negative results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes: 7642cc28fd ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: dsa: qca8k: multiple fix on mdio read/write
Due to some problems in reading the Documentation and elaborating it
some wrong assumption were done. The error was reported and notice only
now due to how things are setup in the code flow.
First 2 patch fix mgmt eth where the lenght calculation is very
confusing and in step of word size. (the related commit description have
an extensive description about how this mess works)
Last 3 patch revert the broken mdio cache and apply a correct version
that should still save some extra mdio in phy poll secnario.
These 5 patch fix each related problem and apply what the Documentation
actually say.
Changes v2:
- Add cover letter
- Fix typo in revert patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve mdio master read/write by using singe mii read/write lo/hi.
In a read and write we need to poll the mdio master regs in a busy loop
to check for a specific bit present in the upper half of the reg. We can
ignore the other half since it won't contain useful data. This will save
an additional useless read for each read and write operation.
In a read operation the returned data is present in the mdio master reg
lower half. We can ignore the other half since it won't contain useful
data. This will save an additional useless read for each read operation.
In a read operation it's needed to just set the hi half of the mdio
master reg as the lo half will be replaced by the result. This will save
an additional useless write for each read operation.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may be useful to read/write just the lo or hi half of a reg.
This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.
Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 2481d206fa.
The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.
What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.
Revert the change in favor of a better and correct implementation.
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fd ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.
As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...
Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)
This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.
In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.
To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223f4 ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>