Add an introduction section for the accel subsystem. Most of the
relevant data is in the DRM documentation, so the introduction only
presents the why of the new subsystem, how are the compute accelerators
exposed to user-space and what changes need to be done in a standard
DRM driver to register it to the new accel subsystem.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Now that we have the accel framework code ready, let's call the
accel functions from all the appropriate places. These places are the
drm module init/exit functions, and all the drm_minor handling
functions.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
The accelerator devices are exposed to user-space using a dedicated
major. In addition, they are represented in /dev with new, dedicated
device char names: /dev/accel/accel*. This is done to make sure any
user-space software that tries to open a graphic card won't open
the accelerator device by mistake.
The above implies that the minor numbering should be separated from
the rest of the DRM devices. However, to avoid code duplication, we
want the drm_minor structure to be able to represent the accelerator
device.
To achieve this, we add a new drm_minor* to drm_device that represents
the accelerator device. This pointer is initialized for drivers that
declare they handle compute accelerator, using a new driver feature
flag called DRIVER_COMPUTE_ACCEL. It is important to note that this
driver feature is mutually exclusive with DRIVER_RENDER. Devices that
want to expose both graphics and compute device char files should be
handled by two drivers that are connected using the auxiliary bus
framework.
In addition, we define a different IDR to handle the accelerators
minors. This is done to make the minor's index be identical to the
device index in /dev/. Any access to the IDR is done solely
by functions in accel_drv.c, as the IDR is define as static. The
DRM core functions call those functions in case they detect the minor's
type is DRM_MINOR_ACCEL.
We define a separate accel_open function (from drm_open) that the
accel drivers should set as their open callback function. Both these
functions eventually call the same drm_open_helper(), which had to be
changed to be non-static so it can be called from accel_drv.c.
accel_open() only partially duplicates drm_open as I removed some code
from it that handles legacy devices.
To help new drivers, I defined DEFINE_DRM_ACCEL_FOPS macro to easily
set the required function operations pointers structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Add a new Kconfig for the accel subsystem. The Kconfig currently
contains only the basic CONFIG_DRM_ACCEL option that will be used to
decide whether to compile the accel registration code. Therefore, the
kconfig option is defined as bool.
The accel code will be compiled as part of drm.ko and will be called
directly from the DRM core code. The reason we compile it as part of
drm.ko and not as a separate module is because of cyclic dependency
between drm.ko and the separate module (if it would have existed).
This is due to the fact that DRM core code calls accel functions and
vice-versa.
The accelerator devices will be exposed to the user space with a new,
dedicated major number - 261.
The accel init function registers the new major number as a char device
and create corresponding sysfs and debugfs root entries, similar to
what is done in DRM init function.
I added a new header called drm_accel.h to include/drm/, that will hold
the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL
is set to 'N', that header will contain empty inline implementations of
those functions, to allow DRM core code to compile successfully
without dependency on CONFIG_DRM_ACCEL.
I Updated the MAINTAINERS file accordingly with the newly added folder
and I have taken the liberty to appropriate the dri-devel mailing list
and the dri-devel IRC channel for the accel subsystem.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
please pull the following etnaviv changes for the next merge window.
Mostly some small workarounds to get new hardware support going. But
also more fixes to the softpin MMU handling and a nice addition from
Christian to make the kernel logs on hang detection more useful.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY3XyTAAKCRDj7w1vZxhR
xfh8APkBLspfEk0WneXqIanPLOLCIU4Fcd7IvjNsy5nRODM5ewD8D4pCzRYz6zGf
0rAHzuvISUBHBWES/EWpO61GJ7d/1gA=
=ZM1O
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
All of the IP specific versions are the same now, so
we can just use a common function.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This matches what we do for psp 3.1 and makes ring_init
common for all PSP versions.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these kernel-doc complaints:
drivers/gpu/drm/amd/display/dc/dc.h:505: warning: cannot understand function prototype: 'struct dc_clocks '
dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID' not described in enum 'pipe_split_policy'
dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID_MULT_DISP' not described in enum 'pipe_split_policy'
dc.h:532: warning: Incorrect use of kernel-doc format: * @fw_based_mclk_switching
Fixes: ea76895ffab1 ("drm/amd/display: Document pipe split policy")
Fixes: 1682bd1a6b5f ("drm/amd/display: Expand kernel doc for DC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FW fix available to enable cooperative launch for GFX10.3.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow user to know number of compute units (CU) that are in use at any
given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy
that computes CU occupancy.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code reusable.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the code can be reused.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set support flag for VCN/JPEG 4.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't assume FRU MCU memory locations for the FRU data fields, or their sizes,
instead read and interpret the IPMI data, as stipulated in the IPMI spec
version 1.0 rev 1.2.
Extract the Product Name, Product Part/Model Number, and the Product Serial
Number by interpreting the IPMI data.
Check the checksums of the stored IPMI data to make sure we don't read and
give corrupted data back the the user.
Eliminate small I2C reads, and instead read the whole Product Info Area in one
go, and then extract the information we're seeking from it.
Eliminates a whole function, making this file smaller.
v2: Clarify changes in the commit message.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the new correct default FRU MCU I2C address for newer ASICs, so that we
can correctly read the Product Name, Product Part/Model Number and Serial
Number.
On newer ASICs, the FRU MCU was moved to I2C address 0x58.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow non-standard EEPROM I2C address of 0x58, where the Device Type
Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some
ASICs the FRU data lives there.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused parameters and cleanup dead code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean that up a bit, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The basic problem here is that it's not allowed to page fault while
holding the reservation lock.
So it can happen that multiple processes try to validate an userptr
at the same time.
Work around that by putting the HMM range object into the mutex
protected bo list for now.
v2: make sure range is set to NULL in case of an error
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since switching to HMM we always need that because we no longer grab
references to the pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we've fixed the issue with using the incorrect topology manager,
we're actually grabbing the topology manager's lock - and consequently
deadlocking. Luckily for us though, there's actually nothing in AMD's DSC
state computation code that really should need this lock. The one exception
is the mutex_lock() in dm_dp_mst_is_port_support_mode(), however we grab no
locks beneath &mgr->lock there so that should be fine to leave be.
Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This bug hurt me. Basically, it appears that we've been grabbing the
entirely wrong mutex in the MST DSC computation code for amdgpu! While
we've been grabbing:
amdgpu_dm_connector->mst_mgr
That's zero-initialized memory, because the only connectors we'll ever
actually be doing DSC computations for are MST ports. Which have mst_mgr
zero-initialized, and instead have the correct topology mgr pointer located
at:
amdgpu_dm_connector->mst_port->mgr;
I'm a bit impressed that until now, this code has managed not to crash
anyone's systems! It does seem to cause a warning in LOCKDEP though:
[ 66.637670] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
This was causing the problems that appeared to have been introduced by:
commit 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
This wasn't actually where they came from though. Presumably, before the
only thing we were doing with the topology mgr pointer was attempting to
grab mst_mgr->lock. Since the above commit however, we grab much more
information from mst_mgr including the atomic MST state and respective
modesetting locks.
This patch also implies that up until now, it's quite likely we could be
susceptible to race conditions when going through the MST topology state
for DSC computations since we technically will not have grabbed any lock
when going through it.
So, let's fix this by adjusting all the respective code paths to look at
the right pointer and skip things that aren't actual MST connectors from a
topology.
Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like that we're accidentally dropping a pretty important return code
here. For some reason, we just return -EINVAL if we fail to get the MST
topology state. This is wrong: error codes are important and should never
be squashed without being handled, which here seems to have the potential
to cause a deadlock.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 8ec046716ca8 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It appears that amdgpu makes the mistake of completely ignoring the return
values from the DP MST helpers, and instead just returns a simple
true/false. In this case, it seems to have come back to bite us because as
a result of simply returning false from
compute_mst_dsc_configs_for_state(), amdgpu had no way of telling when a
deadlock happened from these helpers. This could definitely result in some
kernel splats.
V2:
* Address Wayne's comments (fix another bunch of spots where we weren't
passing down return codes)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Assert on non-OK response from SMU is unnecessary.
It was replaced with respective log message on other asics
in the past with commit:
"drm/amd/display: Removing assert statements for Linux"
[How]
Remove assert and add dbg logging as on other DCNs.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the new callback outside of the guard.
Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
CC: Alvin Lee <Alvin.Lee2@amd.com>
CC: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no reason to use page based mappings, as the established
mappings are special driver mappings anyways and should not be
handled like normal pages.
Be consistent with what other drivers do and use raw PFN based
mappings.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GPU is found on the NXP i.MX8MN SoC. The feature bits are taken from
the NXP downstream kernel driver 6.4.3.p2.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The MODULE_LICENSE macro is missing from the kunit helpers file, thus
leading to a build error.
Let's introduce it along with MODULE_AUTHOR.
Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20221116091712.1309651-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The kunit helpers code weren't including its header, leading to a
warning that no previous prototype had been defined for public
functions.
Include the matching header to fix the warning.
Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20221116091712.1309651-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
We've used a temporary platform device for firmware EDID loading since
it was introduced in commit da0df92b5731 ("drm: allow loading an EDID as
firmware to override broken monitor"), but there's no explanation why.
Using a temporary device does not play well with CONFIG_FW_CACHE=y,
which caches firmware images (e.g. on suspend) so that drivers can
request firmware when the system is not ready for it, and return the
images from the cache (e.g. during resume). This works automatically for
regular devices, but obviously not for a temporarily created device.
Stop using the throwaway platform device, and use the drm device
instead.
Note that this may still be problematic for cases where the display was
plugged in during suspend, and the firmware wasn't loaded and therefore
not cached before suspend.
References: https://lore.kernel.org/r/20220727074152.43059-1-matthieu.charette@gmail.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2061
Reported-by: Matthieu CHARETTE <matthieu.charette@gmail.com>
Tested-by: Matthieu CHARETTE <matthieu.charette@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114111709.434979-1-jani.nikula@intel.com
Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.
The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.
With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.
The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.
v2:
* print a warning if a driver does not init (Helge)
* wrap video_firmware_drivers_only() in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de
Schedule the deferred-I/O worker instead of the damage worker after
writing to the fbdev framebuffer. The deferred-I/O worker then performs
the dirty-fb update. The fbdev emulation will initialize deferred I/O
for all drivers that require damage updates. It is therefore a valid
assumption that the deferred-I/O worker is present.
It would be possible to perform the damage handling directly from within
the write operation. But doing this could increase the overhead of the
write or interfere with a concurrently scheduled deferred-I/O worker.
Instead, scheduling the deferred-I/O worker with its regular delay of
50 ms removes load off the write operation and allows the deferred-I/O
worker to handle multiple write operations that arrived during the delay
time window.
v3:
* remove unused variable (lkp)
v2:
* keep drm_fb_helper_damage() (Daniel)
* use fb_deferred_io_schedule_flush() (Daniel)
* clarify comments (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-6-tzimmermann@suse.de
Call fb_dirty directly from drm_fb_helper_deferred_io() to avoid the
latency of running the damage worker.
The deferred-I/O helper drm_fb_helper_deferred_io() runs in a worker
thread at regular intervals as part of writing to mmaped framebuffer
memory. It used to schedule the fbdev damage worker to flush the
framebuffer. Changing this to flushing the framebuffer directly avoids
the latency introduced by the damage worker.
v2:
* remove fb_dirty from defio in separate patch (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-5-tzimmermann@suse.de
The helper for processing deferred I/O on pages has no dependency on
the fb_dirty damge-handling callback; so remove the test. In practice,
deferred I/O is only used with damage handling and the damage worker
already guarantees the presence of the fb_dirty callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-4-tzimmermann@suse.de
Move the dirty-fb update from the damage-worker callback into the
new helper drm_fb_helper_fb_dirty(), so that it can run outside the
damage worker. This change will help to remove the damage worker
entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-3-tzimmermann@suse.de
Set the damage area in the new helper drm_fb_helper_add_damage_clip().
It can now be updated without scheduling the damage worker. This change
will help to remove the damage worker entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-2-tzimmermann@suse.de
