In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
genlmsg_cancel() needs to be called in the error path of
inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel
the message.
Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We always have to update the value of ret, otherwise the
error value may be the previous one.
Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver")
Signed-off-by: Wang Qing <wangqing@vivo.com>
[grygorii.strashko@ti.com: fix build warn, subj add fixes tag]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 4c2703dfd7fa ("net: marvell: prestera: Add PCI interface support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu>
Acked-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20201113113236.71678-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selecting VSC8575 as a MACSec PHY was not correct
The relevant datasheet can be found here:
- VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575
History:
v1 -> v2:
- Corrected the sha in the "Fixes:" tag
Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization")
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 58956317c8de ("neighbor: Improve garbage collection")
guarantees neighbour table entries a five-second lifetime. Processes
which make heavy use of multicast can fill the neighour table with
multicast addresses in five seconds. At that point, neighbour entries
can't be GC-ed because they aren't five seconds old yet, the kernel
log starts to fill up with "neighbor table overflow!" messages, and
sends start to fail.
This patch allows multicast addresses to be thrown out before they've
lived out their five seconds. This makes room for non-multicast
addresses and makes messages to all addresses more reliable in these
circumstances.
Fixes: 58956317c8de ("neighbor: Improve garbage collection")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the SoC/platform the CPSW can completely lose context after a
suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of
WR_C0_MISC_EN register, so CPTS IRQ will became disabled.
Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is
actually started.
Fixes: 84ea9c0a95d7 ("net: ethernet: ti: cpsw: enable cpts irq")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* a use-after-free fix in rfkill
* a memory leak fix in the mac80211 TX status path
* some rate scaling fixes
* a fix for the often-reported (by syzbot) sleeping
in atomic issue with mac80211's station removal
-----BEGIN PGP SIGNATURE-----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=r2Wn
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* a use-after-free fix in rfkill
* a memory leak fix in the mac80211 TX status path
* some rate scaling fixes
* a fix for the often-reported (by syzbot) sleeping
in atomic issue with mac80211's station removal
* tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: free sta in sta_info_insert_finish() on errors
mac80211: minstrel: fix tx status processing corner case
mac80211: minstrel: remove deferred sampling code
mac80211: fix memory leak on filtered powersave frames
rfkill: Fix use-after-free in rfkill_resume()
====================
Link: https://lore.kernel.org/r/20201113093421.24025-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The x25_disconnect function in x25_subr.c would decrease the refcount of
"x25->neighbour" (struct x25_neigh) and reset this pointer to NULL.
However, the x25_rx_call_request function in af_x25.c, which is called
when we receive a connection request, does not increase the refcount when
it assigns the pointer.
Fix this issue by increasing the refcount of "struct x25_neigh" in
x25_rx_call_request.
This patch fixes frequent kernel crashes when using AF_X25 sockets.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping
fails, after freeing the socket buffer.
Fix the mtk_star_netdev_start_xmit() function accordingly.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20201112084833.21842-1-vincent.stehle@laposte.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a user unbinds and re-binds a NC-SI aware driver the kernel will
attempt to register the netlink interface at runtime. The structure is
marked __ro_after_init so registration fails spectacularly at this point.
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind
ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip
ftgmac100 1e660000.ethernet: Using NCSI interface
8<--- cut here ---
Unable to handle kernel paging request at virtual address 80a8f858
pgd = 8c768dd6
[80a8f858] *pgd=80a0841e(bad)
Internal error: Oops: 80d [#1] SMP ARM
CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51
Hardware name: Generic DT based system
PC is at genl_register_family+0x1f8/0x6d4
LR is at 0xff26ffff
pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153
sp : 8553bc80 ip : 81406244 fp : 8553bd04
r10: 8085d12c r9 : 80a8f73c r8 : 85739000
r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858
r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 85524008 DAC: 00000051
Process sh (pid: 116, stack limit = 0x1f1988d6)
...
Backtrace:
[<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48)
r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000
r4:8121c000
[<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210)
r5:8121c400 r4:8121c000
[<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778)
r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88
r4:85739000
[<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8)
r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000
[<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514)
r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10
Jakub pointed out that ncsi_register_dev is obviously broken, because
there is only one family so it would never work if there was more than
one ncsi netdev.
Fix the crash by registering the netlink family once on boot, and drop
the code to unregister it.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- net: udp: fix out-of-order packets when forwarding with UDP GSO
fraglists turned on
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter rules
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AKM7
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
- Fix documentation regarding GPIO properties (Andy Shevchenko).
- Fix spelling mistakes in ACPI documentation (Flavio Suligoi).
- Fix white space inconsistencies in ACPI code (Maximilian Luz).
- Fix string formatting in the ACPI Generic Event Device (GED)
driver (Nick Desaulniers).
- Add Intel Alder Lake device IDs to the ACPI drivers used by the
Dynamic Platform and Thermal Framework (Srinivas Pandruvada).
- Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI
button driver (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=tUOl
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are mostly docmentation fixes and janitorial changes plus some
new device IDs and a new quirk.
Specifics:
- Fix documentation regarding GPIO properties (Andy Shevchenko)
- Fix spelling mistakes in ACPI documentation (Flavio Suligoi)
- Fix white space inconsistencies in ACPI code (Maximilian Luz)
- Fix string formatting in the ACPI Generic Event Device (GED) driver
(Nick Desaulniers)
- Add Intel Alder Lake device IDs to the ACPI drivers used by the
Dynamic Platform and Thermal Framework (Srinivas Pandruvada)
- Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI
button driver (Hans de Goede)"
* tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Support Alder Lake
Documentation: ACPI: fix spelling mistakes
ACPI: button: Add DMI quirk for Medion Akoya E2228T
ACPI: GED: fix -Wformat
ACPI: Fix whitespace inconsistencies
ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name
Documentation: firmware-guide: gpio-properties: Clarify initial output state
Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
Documentation: firmware-guide: gpio-properties: Fix factual mistakes
Make the intel_pstate driver behave as expected when it operates in
the passive mode with HWP enabled and the "powersave" governor on
top of it.
-----BEGIN PGP SIGNATURE-----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=zh3K
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Make the intel_pstate driver behave as expected when it operates in
the passive mode with HWP enabled and the 'powersave' governor on top
of it"
* tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account
cpufreq: Add strict_target to struct cpufreq_policy
cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET
cpufreq: Introduce governor flags
When no devicetree is present, the driver will use an
uninitialized variable.
Fix by initializing this variable.
Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin says:
====================
net: udp: fix Fast/frag0 UDP GRO
While testing UDP GSO fraglists forwarding through driver that uses
Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order
iperf packets:
[ ID] Interval Transfer Bitrate Jitter
[SUM] 0.0-40.0 sec 12106 datagrams received out-of-order
Simple switch to napi_gro_receive() or any other method without frag0
shortcut completely resolved them.
I've found two incorrect header accesses in GRO receive callback(s):
- udp_hdr() (instead of udp_gro_udphdr()) that always points to junk
in "fast" mode and could probably do this in "regular".
This was the actual bug that caused all out-of-order delivers;
- udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of
skb_gro_network_header()) that potentionally might return odd
pointers in both modes.
Each patch addresses one of these two issues.
This doesn't cover a support for nested tunnels as it's out of the
subject and requires more invasive changes. It will be handled
separately in net-next series.
Credits:
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Since v4 [0]:
- split the fix into two logical ones (Willem);
- replace ternaries with plain ifs to beautify the code (Jakub);
- drop p->data part to reintroduce it later in abovementioned set.
Since v3 [1]:
- restore the original {,__}udp{4,6}_lib_lookup_skb() and use
private versions of them inside GRO code (Willem).
Since v2 [2]:
- dropped redundant check introduced in v2 as it's performed right
before (thanks to Eric);
- udp_hdr() switched to data + off for skbs from list (also Eric);
- fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with
Fast/frag0 due to ip{,v6}_hdr() usage (Willem).
Since v1 [3]:
- added a NULL pointer check for "uh" as suggested by Willem.
[0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch
[1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch
[2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch
[3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch
====================
Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.
Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.
Misc: replace totally unneeded ternaries with plain ifs.
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.
Present since the introduction of plain UDP GRO in 5.0-rc1.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-11-10
This series contains updates to i40e and igc drivers and the MAINTAINERS
file.
Slawomir fixes updating VF MAC addresses to fix various issues related
to reporting and setting of these addresses for i40e.
Dan Carpenter fixes a possible used before being initialized issue for
i40e.
Vinicius fixes reporting of netdev stats for igc.
Tony updates repositories for Intel Ethernet Drivers.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
MAINTAINERS: Update repositories for Intel Ethernet Drivers
igc: Fix returning wrong statistics
i40e, xsk: uninitialized variable in i40e_clean_rx_irq_zc()
i40e: Fix MAC address setting for a VF via Host/VM
====================
Link: https://lore.kernel.org/r/20201111001955.533210-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit in fixes tag overwrites the port attributes for the
registered port.
Avoid such error by checking registered flag before setting attributes.
Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.
Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.
Fixes: dcdd43c41e60 ("net: vrf: performance improvements for IPv4")
Fixes: a9ec54d1b0cd ("net: vrf: performance improvements for IPv6")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfs_inc_stats() is already thread-safe, and there are no other reasons
to hold the inode lock here.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove the contentious inode lock, and instead provide thread safety
using the file->f_lock spinlock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Certain NFSv4.2/RDMA tests fail with v5.9-rc1.
rpcrdma_convert_kvec() runs off the end of the rl_segments array
because rq_rcv_buf.tail[0].iov_len holds a very large positive
value. The resultant kernel memory corruption is enough to crash
the client system.
Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT
in the maximum decode size for a possible XDR pad of the contents
of the xdr_buf's pages. That guarantees the allocated receive buffer
will be large enough to accommodate the usual contents plus that XDR
pad word.
encode_op_hdr() cannot add that extra word. If it does,
xdr_inline_pages() underruns the length of the tail iovec.
Fixes: 3e1f02123fba ("NFSv4.2: add client side XDR handling for extended attributes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We forgot to unregister the nfs4_xattr_large_entry_shrinker.
That leaves the global list of shrinkers corrupted after unload of the
nfs module, after which possibly unrelated code that calls
register_shrinker() or unregister_shrinker() gets a BUG() with
"supervisor write access in kernel mode".
And similarly for the nfs4_xattr_large_entry_lru.
Reported-by: Kris Karas <bugs-a17@moonlit-rail.com>
Tested-By: Kris Karas <bugs-a17@moonlit-rail.com>
Fixes: 95ad37f90c33 "NFSv4.2: add client side xattr caching."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some drivers fill the status rate list without setting the rate index after
the final rate to -1. minstrel_ht already deals with this, but minstrel
doesn't, which causes it to get stuck at the lowest rate on these drivers.
Fix this by checking the count as well.
Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Deferring sampling attempts to the second stage has some bad interactions
with drivers that process the rate table in hardware and use the probe flag
to indicate probing packets (e.g. most mt76 drivers). On affected drivers
it can lead to probing not working at all.
If the link conditions turn worse, it might not be such a good idea to
do a lot of sampling for lower rates in this case.
Fix this by simply skipping the sample attempt instead of deferring it,
but keep the checks that would allow it to be sampled if it was skipped
too often, but only if it has less than 95% success probability.
Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing
packets.
Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged
packets for stations in powersave mode.
To fix this, move the code handling those packets from __ieee80211_tx_status
into ieee80211_tx_status_ext
Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Fixes: 3318111cf63d ("mac80211: reduce duplication in tx status functions")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a device is getting removed or reprobed during resume, use-after-free
might happen. For example, h5_btrtl_resume() schedules a work queue for
device reprobing, which of course requires removal first.
If the removal happens in parallel with the device_resume() and wins the
race to acquire device_lock(), removal may remove the device from the PM
lists and all, but device_resume() is already running and will continue
when the lock can be acquired, thus calling rfkill_resume().
During this, if rfkill_set_block() is then called after the corresponding
*_unregister() and kfree() are called, there will be an use-after-free
in hci_rfkill_set_block():
BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth]
...
Call trace:
dump_backtrace+0x0/0x154
show_stack+0x20/0x2c
dump_stack+0xbc/0x12c
print_address_description+0x88/0x4b0
__kasan_report+0x144/0x168
kasan_report+0x10/0x18
check_memory_region+0x19c/0x1ac
__kasan_check_write+0x18/0x24
hci_rfkill_set_block+0x58/0xc0 [bluetooth]
rfkill_set_block+0x9c/0x120
rfkill_resume+0x34/0x70
dpm_run_callback+0xf0/0x1f4
device_resume+0x210/0x22c
Fix this by checking rfkill->registered in rfkill_resume(). device_del()
in rfkill_unregister() requires device_lock() and the whole rfkill_resume()
is also protected by the same lock via device_resume(), we can make sure
either the rfkill->registered is false before rfkill_resume() starts or the
rfkill device won't be unregistered before rfkill_resume() returns.
As async_resume() holds a reference to the device, at this level there can
be no use-after-free; only in the user that doesn't expect this scenario.
Fixes: 8589086f4efd ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org
[edit commit message for clarity and add more info provided later]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move to the kernel.org patchwork instance, it has significantly
lower latency for accessing from Europe and the US. Other quirks
include the reply bot.
Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rohit Maheshwari says:
====================
cxgb4/ch_ktls: Fixes in nic tls code
This series helps in fixing multiple nic ktls issues. Series is broken
into 12 patches.
Patch 1 avoids deciding tls packet based on decrypted bit. If its a
retransmit packet which has tls handshake and finish (for encryption),
decrypted bit won't be set there, and so we can't rely on decrypted
bit.
Patch 2 helps supporting linear skb. SKBs were assumed non-linear.
Corrected the length extraction.
Patch 3 fixes the checksum offload update in WR.
Patch 4 fixes kernel panic happening due to creating new skb for each
record. As part of fix driver will use same skb to send out one tls
record (partial data) of the same SKB.
Patch 5 fixes the problem of skb data length smaller than remaining data
of the record.
Patch 6 fixes the handling of SKBs which has tls header alone pkt, but
not starting from beginning.
Patch 7 avoids sending extra data which is used to make a record 16 byte
aligned. We don't need to retransmit those extra few bytes.
Patch 8 handles the cases where retransmit packet has tls starting
exchanges which are prior to tls start marker.
Patch 9 fixes the problem os skb free before HW knows about tcp FIN.
Patch 10 handles the small packet case which has partial TAG bytes only.
HW can't handle those, hence using sw crypto for such pkts.
Patch 11 corrects the potential tcb update problem.
Patch 12 stops the queue if queue reaches threshold value.
v1->v2:
- Corrected fixes tag issue.
- Marked chcr_ktls_sw_fallback() static.
v2->v3:
- Replaced GFP_KERNEL with GFP_ATOMIC.
- Removed mixed fixes.
v3->v4:
- Corrected fixes tag issue.
v4->v5:
- Separated mixed fixes from patch 4.
v5-v6:
- Fixes tag should be at the end.
====================
Link: https://lore.kernel.org/r/20201109105142.15398-1-rohitm@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop the queue and ask for the credits if queue reaches to
threashold.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
context id and port id should be filled while sending tcb update.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If TCP congestion caused a very small packets which only has some
part fo the TAG, and that too is not till the end. HW can't handle
such case, so falling back to sw crypto in such cases.
v1->v2:
- Marked chcr_ktls_sw_fallback() static.
Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If its a last packet and fin is set. Make sure FIN is informed
to HW before skb gets freed.
Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There could be a case where ACK for tls exchanges prior to start
marker is missed out, and by the time tls is offloaded. This pkt
should not be discarded and handled carefully. It could be
plaintext alone or plaintext + finish as well.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a record starts in middle, reset TCB UNA so that we could
avoid sending out extra packet which is needed to make it 16
byte aligned to start AES CTR.
Check also considers prev_seq, which should be what is
actually sent, not the skb data length.
Avoid updating partial TAG to HW at any point of time, that's
why we need to check if remaining part is smaller than TAG
size, then reset TX_MAX to be TAG starting sequence number.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an skb has only header part which doesn't start from
beginning, is not being handled properly.
Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
trimmed length calculation goes wrong if skb has only tag part
to send. It should be zero if there is no data bytes apart from
TAG.
Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating SKB per tls record and freeing the original one causes
panic. There will be race if connection reset is requested. By
freeing original skb, refcnt will be decremented and that means,
there is no pending record to send, and so tls_dev_del will be
requested in control path while SKB of related connection is in
queue.
Better approach is to use same SKB to send one record (partial
data) at a time. We still have to create a new SKB when partial
last part of a record is requested.
This fix introduces new API cxgb4_write_partial_sgl() to send
partial part of skb. Present cxgb4_write_sgl can only provide
feasibility to start from an offset which limits to header only
and it can write sgls for the whole skb len. But this new API
will help in both. It can start from any offset and can end
writing in middle of the skb.
v4->v5:
- Removed extra changes.
Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Checksum update was missing in the WR.
Fixes: 429765a149f1 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a possibility of linear skbs coming in. Correcting
the length extraction logic.
v2->v3:
- Separated un-related changes from this patch.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If skb has retransmit data starting before start marker, e.g. ccs,
decrypted bit won't be set for that, and if it has some data to
encrypt, then it must be given to crypto ULD. So in place of
decrypted, check if socket is tls offloaded. Also, unless skb has
some data to encrypt, no need to give it for tls offload handling.
v2->v3:
- Removed ifdef.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
