A few ROHM PMICs have an RTC block which can be controlled by the
rtc-bd70528 driver. The RTC driver needs the alarm interrupt information
from the parent MFD driver. The MFD driver provides the interrupt
information as a set of named interrupts, where the name is of form:
<PMIC model>-rtc-alm-<x>, where x is an alarm block number.
>From the RTC driver point of view it is irrelevant what the PMIC name
is. It is sufficient to know this is alarm interrupt for a block X. The
PMIC model information is carried to RTC via the platform device ID.
Hence, having the PMIC model in the interrupt name is only making things
more complex because the RTC driver needs to request differently named
interrupts on different PMICs, making code unnecessary complicated.
Simplify this slightly by always using the RTC driver name 'bd70528' as
the prefix for alarm interrupts, no matter what the exact PMIC model is,
and always request the alarm interrupts of same name no matter what the
PMIC model is.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/ZvVNCfk10ih0YFLW@fedora
Signed-off-by: Lee Jones <lee@kernel.org>
The MT6328 PMIC is commonly used with the MT6735 SoC. Add initial
support for this PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-5-y.oudjana@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241022124745.5d8d3778@endymion.delvare
Signed-off-by: Lee Jones <lee@kernel.org>
The ASoC CODEC driver masks the IRQs whilst entering and exiting
system suspend to avoid issues where the IRQ handler can run but PM
runtime is disabled. However, as the IRQs could also be used from
other parts of the driver, it would be better to move this handling to
the MFD level.
Remove the handling from the ASoC driver and move it to the MFD
driver. Whilst moving also ensure the IRQs are all masked at the device
level before powering down the device, as per hardware recommendations.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org.>
Link: https://lore.kernel.org/r/20241014095202.828194-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converters.
Place the new AXP323 ID next to the existing AXP313A checks, to let
them share most code.
The only difference is the poly-phase detection code, which gets
extended to check the respective bit in a newly used register.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241007001408.27249-6-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converter, which adds another register.
Add the required boilerplate to introduce a new PMIC to the AXP MFD
driver. Where possible, this just maps into the existing structs defined
for the AXP313A, only deviating where needed.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-5-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
At the moment trying to register a second AXP chip makes the probe fail,
as some sysfs registration fails due to a duplicate name:
...
[ 3.688215] axp20x-i2c 0-0035: AXP20X driver loaded
[ 3.695610] axp20x-i2c 0-0036: AXP20x variant AXP323 found
[ 3.706151] sysfs: cannot create duplicate filename '/bus/platform/devices/axp20x-regulator'
[ 3.714718] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc1-00026-g50bf2e2c079d-dirty #192
[ 3.724020] Hardware name: Avaota A1 (DT)
[ 3.728029] Call trace:
[ 3.730477] dump_backtrace+0x94/0xec
[ 3.734146] show_stack+0x18/0x24
[ 3.737462] dump_stack_lvl+0x80/0xf4
[ 3.741128] dump_stack+0x18/0x24
[ 3.744444] sysfs_warn_dup+0x64/0x80
[ 3.748109] sysfs_do_create_link_sd+0xf0/0xf8
[ 3.752553] sysfs_create_link+0x20/0x40
[ 3.756476] bus_add_device+0x64/0x104
[ 3.760229] device_add+0x310/0x760
[ 3.763717] platform_device_add+0x10c/0x238
[ 3.767990] mfd_add_device+0x4ec/0x5c8
[ 3.771829] mfd_add_devices+0x88/0x11c
[ 3.775666] axp20x_device_probe+0x70/0x184
[ 3.779851] axp20x_i2c_probe+0x9c/0xd8
...
This is because we use PLATFORM_DEVID_NONE for the mfd_add_devices()
call, which would number the child devices in the same 0-based way, even
for the second (or any other) instance.
Use PLATFORM_DEVID_AUTO instead, which automatically assigns
non-conflicting device numbers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-4-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
At the moment there is an implicit relationship between the AXP model
IDs and the order of the strings in the axp20x_model_names[] array.
This is fragile, and makes adding IDs in the middle error prone.
Make this relationship official by changing the ID type to the actual
enum used, and using indexed initialisers for the string list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-3-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The X-Powers AXP323 is a PMIC used on some newer Allwinner devices.
It is almost the same as the AXP313, but supports dual-phasing the first
two DC/DC converters. A pure AXP313 driver wouldn't know about this, and
might turn the linked DCDC2 regulator off, as it does not seem to be
used. This makes the AXP323 incompatible to the AXP313a.
Add the new compatible string, and treat it like the AXP313a.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007001408.27249-2-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Even default case should have a break statement to make code robust
against changes (e.g., adding a case after the default one).
Add missing break for the default case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241016130023.872277-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Embrace ATTRIBUTE_GROUPS() to avoid boiler plate code.
While at it, move DEVICE_ATTR_ADMIN_RW() closer to the callbacks.
This should not introduce any functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241016105201.757024-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Also the TWL6030 has some clocks, so add a subdevice for that.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241014161109.2222-2-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
Since MT6359 PMIC has been added as one of the compatibles of
"mediatek,mt6397.yaml", the sub-device node of "MT6359 PMIC AUXADC",
"MT6359 Audio Codec" and "MT6359 PMIC Regulators" should also be
contained in this DT Schema as well.
This patch includes:
- add 'adc' property and $ref for 'mediatek,mt6359-auxadc'.
- add 'mt6359-regulator' to the compatibles of regulators.
- add 'mt6359-codec' to the compatibles of audio-codec.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241004030148.13366-1-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>
Enable evaluating the start-year property to allow shifting the
RTC's HW range.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240923100010.97470-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert device binding doc zii,rave-sp.txt to yaml format.
Additional change:
- ref to other zii yaml files.
- remove rave-sp-hwmon and rave-sp-leds.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-5-0ab730607422@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96801 "scalable PMIC" provides two physical IRQs. The ERRB
handling can in many cases be omitted because it is used to inform fatal
IRQs, which usually kill the power from the SOC.
There may however be use-cases where the SOC has a 'back-up' emergency
power source which allows some very short time of operation to try to
gracefully shut down sensitive hardware. Furthermore, it is possible the
processor controlling the PMIC is not powered by the PMIC. In such cases
handling the ERRB IRQs may be beneficial.
Add support for ERRB IRQs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/dda4464443fba81f79d5f8d73947dbd63083cff2.1727931468.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Also the TWL603X devices have a charger, so allow to specify it here.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007150120.1416698-3-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
Define EC_FEATURE_UCSI_PPM to enable usage of the cros_ec_ucsi
driver. Also, add any feature flags that are implemented by the EC
but are missing in the kernel header.
Signed-off-by: Pavan Holla <pholla@chromium.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240910101527.603452-3-ukaszb@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
For all of the devices regmap IRQ may try to created the folder
with the same name which is impossible and fails with:
debugfs: File '\_SB.IPC1.PMIC' in directory 'domains' already present!
Add domain_suffix to all of the IRQ chips driver registers to solve
the issue.
Fixes: 39d047c0b1 ("mfd: add Intel Broxton Whiskey Cove PMIC driver")
Fixes: 957ae50981 ("platform/x86: Add Whiskey Cove PMIC TMU support")
Fixes: 57129044f5 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips")
Depends-on: dde286ee57 ("regmap: Allow setting IRQ domain name suffix")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241005193029.1929139-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unveiled when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them.
Fixes: 57129044f5 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips")
Tested-by: Zhang Ning <zhangn1985@outlook.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241005193029.1929139-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unveiled when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them.
Fixes: 957ae50981 ("platform/x86: Add Whiskey Cove PMIC TMU support")
Fixes: 57129044f5 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips")
Reported-by: Zhang Ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/r/TY2PR01MB3322FEDCDC048B7D3794F922CDBA2@TY2PR01MB3322.jpnprd01.prod.outlook.com
Tested-by: Zhang Ning <zhangn1985@outlook.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241005193029.1929139-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unveiled when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them.
Fixes: 9c6235c863 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device")
Fixes: d2061f9cc3 ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY")
Fixes: 57129044f5 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips")
Reported-by: Zhang Ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/r/TY2PR01MB3322FEDCDC048B7D3794F922CDBA2@TY2PR01MB3322.jpnprd01.prod.outlook.com
Tested-by: Zhang Ning <zhangn1985@outlook.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241005193029.1929139-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-18-Julia.Lawall@inria.fr
Signed-off-by: Lee Jones <lee@kernel.org>
The "mss_top_scb" register region on PolarFire SoC contains many
different functions, including controls for the AXI bus and other things
mainly of interest to the bootloader. The interrupt register for the
system controller's mailbox is also in here, which is needed by the
operating system.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241002-clambake-raider-a8cbb3a021a8@spud
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit b4b8183055 ("slimbus: generate MODULE_ALIAS() from
MODULE_DEVICE_TABLE()"), modpost automatically generates MODULE_ALIAS()
from MODULE_DEVICE_TABLE(slim, ).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241002151539.43762-1-masahiroy@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The error path in cs42l43_boot_work() will lead to an unbalanced
regulator put, when the driver is removed. Fix this by relying
on remove to power down the device. Also the boot work needs to
be synchronised with driver remove, to ensure the work is not
still running after the driver has been removed. Add the required
cancel_work_sync().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241002121311.162691-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define regulator sub-device for which driver will
be added in subsequent patch. The device also has ADC for power and
current measurements.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-2-ea1109029ba5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Driver has mixed up the R/W bit.
The LSB bit is set on write rather than read.
Change it to avoid nasty things to happen.
Fixes: e9e9d39735 ("mfd: da9052: Avoid setting read_flag_mask for da9052-i2c driver")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20240925-da9052-v2-1-f243e4505b07@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The maple tree register cache uses a more modern data structure than the
rbtree cache and makes implementation decisions more suited to modern
hardware, switch the bd96801 driver to it to take advantage of this newer
code. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240924-mfd-bd96801-maple-v1-1-04fe33e1f009@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
When UCSI is enabled, don't load cros_usbpd_charger and cros_usbpd_logger
drivers. Charger functionality is provided by the UCSI driver already and
logging will need to be added.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://lore.kernel.org/r/20240910101527.603452-9-ukaszb@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Document the qcom,qcs8300-tcsr compatible, tcsr will provide various
control and status functions for their peripherals.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_tcsr_binding-v2-1-66eb5336b8d1@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
As the comment said, disable_irq() after request_irq() still has a
time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN
flag will disable IRQ auto-enable when request IRQ.
Fixes: 72cd799544 ("[PATCH] I2C: add i2c driver for TPS6501x")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912031530.2211654-1-ruanjinjie@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add compatible for tcsr representing support on SA8255p SoC.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240905194741.3803345-1-quic_nkela@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # for atmel-flexcom.c
Link: https://lore.kernel.org/r/20240905092718.95011-1-shenlichuan@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
syscon has always set the optional max_register configuration of
regmap to ensure the correct checks are in place. However, a recent
commit 0ec74ad3c1 ("regmap: rework ->max_register handling")
introduced explicit configuration in regmap framework for register
maps that is exactly 1 register, when max_register is pointing to a
valid register 0. This commit solved a previous limitation of regmap
framework.
Update syscon driver to consistent in regmap configuration for
all sizes of syscons by using this new capability by setting
max_register_is_0, when the max_register is valid and 0.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240903184710.1552067-1-nm@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the mfd: mediatek: mt6397 binding to DT schema format.
MT6323, MT6358, and MT6397 are PMIC devices with multiple function
subdevices. They share a common PMIC design but have variations in
subdevice combinations.
Key updates in this conversion:
1. RTC:
- Convert rtc-mt6397.txt and merge into parent MT6397 PMIC DT schema.
2. Regulators:
- Align to generic name "regulators".
- Update references from .txt to .yaml for mt6323, mt6358, and mt6397
regulators.
- Simplify regulator name labels in device tree examples.
3. Audio Codec:
- Simplify Audio Codec part with updating compatible items.
- Align to generic name "audio-codec" for codec and sound subdevices.
4. Clocks:
- Align to generic name "clocks" for clockbuffer subdevices.
5. LEDs:
- Convert leds-mt6323.txt and merge into parent MT6397 PMIC DT schema.
- Update LED binding.
6. Keys:
- Add detailed descriptions for power and home keys.
- Add compatible: mediatek,mt6358-keys.
7. Power Controller:
- Convert mt6323-poweroff.txt and merge into parent MT6397 PMIC DT
schema.
- Add #power-domain-cells property to fix dt-binding check error.
- Clarify "BBPU" as "Baseband power up".
8. Pinctrl:
- Align to generic name "pinctrl" instead of "pin-controller".
9. Compatible:
- Drop "mediatek,mt6357" since there is a separated DT Schema
for PMIC MT6357.
10. Examples:
- MT6323: Retain complete examples for this PMIC.
- MT6358 and MT6397: simplify settings in regulators.
- Preserve "audio-codec", "clocks", "pinctrl", "rtc", and "keys"
sections as they contain typical settings for different PMICs.
Additional updates:
- MAINTAINERS: Add co-maintainers and reference to
mfd/mediatek,mt6397.yaml for LED and power-controller drivers.
- input/mediatek,pmic-keys.yaml: Update reference to
mfd/mediatek,mt6397.yaml.
Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241001104145.24054-3-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add i2c support for the Congatec Board Controller.
The Board Controller has two i2c busses, a General Purpose bus and a Power
Management bus.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-3-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add gpio support for the Congatec Board Controller.
This Board Controller has 14 GPIO pins.
The driver is probed by the Congatec Board Controller MFD driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-2-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
