The "sound/soc/sh" directory has been renamed to "sound/soc/renesas".
Update the comment in audio-graph-card2.c to reflect the new file path
for better accuracy.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the "sh" folder to "renesas" to better reflect the Renesas-specific
drivers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241025150511.722040-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct adau1373_platform_data" was not being used by any platform.
Hence, drop it and move to firmware based support. All the
configurations quirks present in the platform_data are now supported as
firmware properties.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241028-adau1373-shutdown-v2-3-647f56bbd182@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a system with wcd937x, rxmacro and Qualcomm audio DSP, which is pretty
common set of devices on Qualcomm platforms, and due to the order of how
DAPM widgets are powered on (they are sorted), there is a small time window
when wcd937x chip is online and expects the flow of incoming data but
rxmacro is not yet online. When wcd937x is programmed to receive data
via AUX port then its AUX PDM watchdog is enabled in
wcd937x_codec_enable_aux_pa(). If due to some reasons the rxmacro and
soundwire machinery are delayed to start streaming data, then there is
a chance for this AUX PDM watchdog to reset the wcd937x codec. Such event
is not logged as a message and only wcd937x IRQ counter is increased
however there could be a lot of other reasons for that IRQ.
There is a similar opportunity for such delay during DAPM widgets power
down sequence.
If wcd937x codec reset happens on the start of the playback, then there
will be no sound and if such reset happens at the end of a playback then
it may generate additional clicks and pops noises.
On qrb4210 RB2 board without any debugging bits the wcd937x resets are
sometimes observed at the end of a playback though not always.
With some debugging messages or with some tracing enabled the AUX PDM
watchdog resets the wcd937x codec at the start of a playback and there
is no sound output at all.
In this patch:
- TIMEOUT_SEL bit in PDM_WD_CTL2 register is set to increase the watchdog
reset delay to 100ms which eliminates the AUX PDM watchdog IRQs on
qrb4210 RB2 board completely and decreases the number of unwanted clicks
noises;
- HOLD_OFF bit postpones triggering such watchdog IRQ till wcd937x codec
reset which usually happens at the end of a playback. This allows to
actually output some sound in case of debugging.
Cc: Adam Skladowski <a39.skl@gmail.com>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-3-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wcd937x supports also AUX input but the control that sets correct
soundwire port for this is missing. This control is required for audio
playback, for instance, on qrb4210 RB2 board as well as on other
SoCs.
Reported-by: Adam Skladowski <a39.skl@gmail.com>
Reported-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Suggested-by: Adam Skladowski <a39.skl@gmail.com>
Suggested-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241022033132.787416-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of of_match_ptr() is incorrect here and just causes
a warning:
sound/soc/codecs/cs42l84.c:1084:34: error: unused variable 'cs42l84_of_match' [-Werror,-Wunused-const-variable]
Fixes: 250304a0fb34 ("ASoC: cs42l84: Add new codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241029092404.3874040-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This also includes a change to the capture level as they differ with
this device, as well as additional values for prefader channels.
Acked-by: Olivia Mackintosh <livvy@base.nu>
Signed-off-by: Sarah Grant <s@srd.tw>
Link: https://patch.msgid.link/20241025163927.12662-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Infinix ZERO BOOK 13 has a 2+2 speaker system which isn't probed correctly.
This patch adds a quirk with the proper pin connections.
Also The mic in this laptop suffers too high gain resulting in mostly
fan noise being recorded,
This patch Also limit mic boost.
HW Probe for device; https://linux-hardware.org/?probe=a2e892c47b
Test: All 4 speaker works, Mic has low noise.
Signed-off-by: Piyush Raj Chouhan <piyushchouhan1598@gmail.com>
Link: https://patch.msgid.link/20241028155516.15552-1-piyuschouhan1598@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled.
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Fixes: 80e698e2df5b ("ASoC: soc-dapm: Annotate struct snd_soc_dapm_widget_list with __counted_by")
Link: https://patch.msgid.link/20241028-soc-dapm-bounds-checker-fix-v1-1-262b0394e89e@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the rt722 multi-function codec and the
rt1320 amplifier in the ARL board configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Link 2: RT1320 amplifier.
Note:
The Speaker endpoint on the RT722 codec is not used.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier
function for this Dell SKU.
Note: In this SKU '0CF0', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SKUs use the multi-function codec, which integrates
Headset, Amplifier and DMIC. The corresponding quirks provide
options to support internal amplifier/DMIC or not.
In the case of RT722, this SKU excludes the internal amplifier and
use an additional amplifier instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because we designed a new version of ES8326, the configuration of
micbias needed to be modified.We tested the new driver,
on both the new version and the old one. It works well.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20241028060529.3359-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last use of devm_snd_soc_register_dai() was removed by
commit fc4cb1e15f0c ("ASoC: topology: Properly unregister DAI on removal")
in 2021.
Remove it, and the helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241028021226.477909-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If devm_gpiod_get_optional() fails, we need to disable previously enabled
regulators, as done in the other error handling path of the function.
Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a
potential gpiod_set_value_cansleep(, 0).
If the "reset" gpio is not defined, this additional call is just a no-op.
This behavior is the same as the one already in the .remove() function.
Fixes: 11b9cd748e31 ("ASoC: cs42l51: add reset management")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Some old Bay Trail tablets which shipped with Android as factory OS
have the SST/LPE audio engine described by an ACPI device with a
HID (Hardware-ID) of LPE0F28 instead of 80860F28.
Add support for this. Note this uses a new sst_res_info for just
the LPE0F28 case because it has a different layout for the IO-mem ACPI
resources then the 80860F28.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241025090221.52198-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a requirement to expose the audio hardware that accelerates various
tasks for user space such as sample rate converters, compressed
stream decoders, etc.
This is description for the API extension for the compress ALSA API which
is able to handle "tasks" that are not bound to real-time operations
and allows for the serialization of operations.
For details, refer to "compress-accel.rst" document.
Cc: Mark Brown <broonie@kernel.org>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241002093904.1809799-1-perex@perex.cz
The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults,
but as happens on more models it is using IN1 instead of IN3 for
its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P
for jack-detection.
Add a DMI quirk for this to fix the internal-mic and jack-detection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some x86 Bay Trail tablets which shipped with Android as factory OS,
the DSDT is so broken that the codec needs to be manually instantatiated
by the special x86-android-tablets.ko "fixup" driver for cases like this.
This means that the codec-dev cannot be retrieved through its ACPI fwnode,
add support to the bytcr_rt5640 machine driver for such manually
instantiated rt5640 i2c_clients.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87ed46b5sm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87fromb5sr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Current test-component.c is using for_each_endpoint_of_node()
for parsing "port", because there was no "port" base loop before.
It has been assuming 1 port has 1 endpoint here.
But now we can use "port" base loop (= for_each_of_graph_port()).
Let's replace for_each function from "endpoint" base to "port" base.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87h692b5sw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This patch set adds a driver for the Cirrus Logic CS42L84 codec. This chip
is (so far) found only on Apple Silicon Macs. In keeping with proud Apple
tradition, the CS42L84 is essentially just a CS42L42 with a different
regmap and no publicly available datasheet. It may also be missing its
parent's S/PDIF capabilities as none of Apple's devices support S/PDIF out,
however this cannot be positively confirmed.
This driver has lived in the downstream Asahi tree for quite a while now,
and gained some refinements along the way. I have squashed most of these
into the initial driver commit as they were small changes like tweaking
msleep()s or filling out TLVs, but left seperate a larger change to
tip/ring sense IRQ handling as it differs significantly from what is found
in the CS42L42 driver.
Merge series from Ryan Walklin <ryan@testtoast.com>:
The Allwinner H616 has a playback-only audio codec, with a single stereo
or differential-mono line output. This patch series adds support for
the H616 (and H313/H618/H700/T507) SoC. Based on the Allwinner kernel
SDK driver, and tested on the H700.
Some jacks integrated on devices with this codec, such as certain
Apple Silicon Macs, have quite trigger-happy tip sense switches that
cause a tip sense IRQ before the plug is fully seated. If users are
unfortunate with their timing, this can lead to headsets being detected
as mic-less headphones among other issues with the codec's device
detection routines.
Introduce some rudimentary ring sense interrupt handling so that we
can re-trigger the codec's detection routines when we are certain
that the plug is fully seated.
This seems to differ from what other Cirrus drivers do, but is
necessary for devices to be reliably detected properly here.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-3-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L84 is a codec from Cirrus Logic found in Apple Silicon Macs.
The chip continues Apple's long tradition of compelling vendors to
spin out bespoke SKUs that are based on existing IP but made subtly
incompatible with the publicly available part. CS42L84 is very similar
to CS42L42, but has a different regmap.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20241020-cs42l84-v2-2-37ba2b6721d9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mismatch between function parameter and description.
Below warning are reported with W=1.
warning: Function parameter or struct member 'val' not described in
'rt_sdca_index_update_bits'
warning: Excess function parameter 'value' description in
'rt_sdca_index_update_bits'
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20241024060205.20201-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The H616 SoC codec is playback-only with a single line-out route, and
has some register differences from prior codecs.
Add the required compatible string, registers, quirks, DAPM widgets,
codec controls and routes, based on existing devices and the H616
datasheet.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20241023075917.186835-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices only have the playback side of the codec implemented
so add a quirk to check for this. This flag is only required internally
within the codec driver, as the DAI is configured for playback only
(capture disabled) separately in the create_card() function for these
devices.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20241023075917.186835-5-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Allwinner H616 SoC uses a different register address to control the
output FIFO.
Allow this to be specified separately from the ADC FIFO control
register.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20241023075917.186835-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An uncomfortably large set of fixes due to me not getting round to
sending them for longer than I should due to travel and illness. This
is mostly smaller driver specific changes, but there are a couple of
generic changes:
- Bumping the minimal topology ABI we check for during validation, the
code had support for v4 removed previously but the update of the
define used for initial validation was missed.
- Fix the assumption that DAPM structs will be embedded in a component
which isn't true for card widgets when doing name comparisons, though
fortunately this is rarely triggered.
We've pulled in one Soundwire fix which was part of a larger series
fixing cleanup issues in on Intel Soundwire systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmcZbjoACgkQJNaLcl1U
h9BoYQf9EOlJlxr1s8iJxERcsps7BjLG1dOYeCMKEkZTG1j8BDMsKmcbXWboWQIC
0+kcfTm7DeYnXZQPJD4LllyUuWushphksllk+tTXRFqihEN9Bwa96TgzzoK+UFUc
PyfEps3fW2w1iUz4Rq4psueDl2g6X4edmqUvdSyquOiVMI0tiEbs7OQgATbdlIrG
13HlJMumQ1zblzceFnzTfCZNKHQyhNoJuzwLX5HjanEFor/OcVULtwcNA175Roqw
fpFxmmntGHFbZPqSJ2lAQmeBgYC0RH+GP6nFK2zWGN+7aLs7QM0PqEDrN16IxtpJ
h/6Hnu8scPHabrh4aYyew7YB8hXLpA==
=BQdY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
An uncomfortably large set of fixes due to me not getting round to
sending them for longer than I should due to travel and illness. This
is mostly smaller driver specific changes, but there are a couple of
generic changes:
- Bumping the minimal topology ABI we check for during validation, the
code had support for v4 removed previously but the update of the
define used for initial validation was missed.
- Fix the assumption that DAPM structs will be embedded in a component
which isn't true for card widgets when doing name comparisons, though
fortunately this is rarely triggered.
We've pulled in one Soundwire fix which was part of a larger series
fixing cleanup issues in on Intel Soundwire systems.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Now, we don't need to use dpcm_playback/capture flags for DPCM since v6.11,
and thus we can use playback/capture_only flags instead too for DPCM,
which is same as non-DPCM.
Let's remove dpcm_playback/capture flags, and use playback/capture_only flags
instead.
[Before] [After]
dpcm_playback = 1; /* no setting is needed */
dpcm_capture = 1;
dpcm_playback = 1; playback_only = 1;
dpcm_capture = 0;
dpcm_playback = 0; capture_only = 1;
dpcm_capture = 1;
And then, because no-one uses dpcm_xxx flags, we don't need to have the code
for both DPCM and non-DPCM. These can be handled by same code.
When reset_control_deassert() fails it returns valid error codes stored
in return, pass that to dev_err_probe() instead of
PTR_ERR(ntp8835->reset).
Fixes: dc9004ea273a ("ASoC: codecs: Add NeoFidelity NTP8835 codec")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202409281054.DUTb5KxU-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241023144421.1720234-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Add new debug only parameters to override the default IPC and boot
timeout, these are only available if CONFIG_SND_SOC_SOF_DEBUG is
enabled, only for developers.
The second patch moves the firmware, topology name/path and IPC
version overrides from acpi/pci/of platform code to core and markes
the platform parameters deprecated, to be removed in few kernel
cycles.
There is really no point of duplicating these overrides as they
are not platform dependent.
Old procedure has a chance to meet Headphone no output.
Fixes: c2d6af53a43f ("ALSA: hda/realtek - Add default procedure for suspend and resume state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/17b717a0a0b04a77aea4a8ec820cba13@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DPCM and non-DPCM validation check are very similar. The big difference
is that DPCM doesn't check Codec validation. This is historical reason.
It should be checked, but it breaks existing driver/behavior.
Anyway, if we uses dummy DAI as Codec when DPCM case, there is no
difference between DPCM and non-DPCM. Let's merge these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734kq9vgq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_xxx flags are no longer needed. It converts dpcm_xxx flag to
xxx_only if needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87bjze9vhp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
