Use device managed functions to simplify handling of failures during
probe. Remove fail paths which are no longer necessary.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The static global soc_uid is only ever used as kasprintf() parameter in
imx8m_soc_probe(). Pass pointer to local u64 variable to .soc_revision()
callback instead and let the .soc_revision() callback fill in the content.
Remove the unnecessary static global variable.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With driver_async_probe=* on kernel command line, the following trace is
produced because on i.MX8M Plus hardware because the soc-imx8m.c driver
calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock
driver is not yet probed. This was not detected during regular testing
without driver_async_probe.
Convert the SoC code to platform driver and instantiate a platform device
in its current device_initcall() to probe the platform driver. Rework
.soc_revision callback to always return valid error code and return SoC
revision via parameter. This way, if anything in the .soc_revision callback
return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get
retried later.
"
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603
Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : imx8mm_soc_revision+0xdc/0x180
lr : imx8mm_soc_revision+0xd0/0x180
sp : ffff8000821fbcc0
x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120
x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311
x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb
x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff
x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8
x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801
x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c
x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3
x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb
Call trace:
imx8mm_soc_revision+0xdc/0x180
imx8_soc_init+0xb0/0x1e0
do_one_initcall+0x94/0x1a8
kernel_init_freeable+0x240/0x2a8
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
SoC: i.MX8MP revision 1.1
"
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-npe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for amlogic/meson-clk-measure.c
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-soc-v2-1-8bc7c03e3e69@quicinc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic: Add support for the T7 power-domains controller
- amlogic: Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom: Add support for the rpmhpds for SC8380XP power-domains
- qcom: Add support for the rpmhpds for SM8650 power-domains
- qcom: Add support for the rpmhpd clocks for SM7150
- qcom: Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
-----BEGIN PGP SIGNATURE-----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=+iJn
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic:
- Add support for the T7 power-domains controller
- Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom:
- Add support for the rpmhpds for SC8380XP power-domains
- Add support for the rpmhpds for SM8650 power-domains
- Add support for the rpmhpd clocks for SM7150
- Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
pmdomain: amlogic: Fix mask for the second NNA mem PD domain
pmdomain: qcom: rpmhpd: Add SC8380XP power domains
pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
dt-bindings: power: rpmpd: Add SC8380XP support
dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
pmdomain: imx: Make imx pgc power domain also set the fwnode
pmdomain: qcom: rpmpd: Add QM215 power domains
pmdomain: qcom: rpmpd: Add MSM8917 power domains
dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
pmdomain: Use device_get_match_data()
pmdomain: ti: add missing of_node_put
pmdomain: mediatek: Add support for MT8365
pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
pmdomain: mediatek: Add support for WAY_EN operations
pmdomain: mediatek: Unify configuration for infracfg and smi
...
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc- and firmware subsystem to the pmdomain
subsystem.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: <kernel@pengutronix.de>
Cc: <linux-imx@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.
This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To simplify with maintenance let's move the imx power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: <kernel@pengutronix.de>
Cc: <linux-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Make the imx8m soc driver as tristate so that it can be built as loadable
module, module names are:
soc-imx8m.ko, imx8m-blk-ctrl.ko and imx8mp-blk-ctrl.ko
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add MODULE_LICENSE to support building as module.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add MODULE_LICENSE to support building as a module.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The genpd_dev_pm_attach_by_name() is not exported, following error
occurs when building imx8m-blk-ctrl as a module:
ERROR: modpost: "genpd_dev_pm_attach_by_name" [drivers/soc/imx/imx8m-blk-ctrl.ko] undefined!
Fix this by using dev_pm_domain_attach_by_name() instead.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add MODULE_LICENSE to support building as a module.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Once set CONFIG_SOC_IMX8M as m, following error occurs:
drivers/soc/imx/imx8mp-blk-ctrl.c:747:25: error: ‘imx8m_blk_ctrl_of_match’
undeclared here (not in a function); did you mean ‘imx8mp_blk_ctrl_of_match’?
747 | MODULE_DEVICE_TABLE(of, imx8m_blk_ctrl_of_match);
| ^~~~~~~~~~~~~~~~~~~~~~~
Fix the typo.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The genpd_dev_pm_attach_by_name() is not exported, following error
occurs when building imx8mp-blk-ctrl as a module:
ERROR: modpost: "genpd_dev_pm_attach_by_name" [drivers/soc/imx/imx8mp-blk-ctrl.ko] undefined!
Fix this by using dev_pm_domain_attach_by_name() instead.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This particular block can have DT subnodes describing the LVDS LDB
bridge. Instead of misusing simple-bus to scan for those nodes, do
the scan within the driver.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Since this device is only partially initialized by the irqchip driver,
we need to mark the fwnode device as not initialized. This is to let
fw_devlink know that the device will be completely initialized at a
later point. That way, fw_devlink will continue to defer the probe of
the power domain consumers till the power domain driver successfully
binds to the struct device and completes the initialization of the
device.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-11-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Same as done for both LCDIF interfaces in the MEDIA domain, set
the panic priority of the LCDIF instance in the HDMI domain to
the maximium NoC priority of 7 to minimize chances of display
underflows.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
of_clk_get_by_name() returns error pointers instead of NULL.
Use IS_ERR() checks the return value to catch errors.
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.
Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.
Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the LCDIF block signals a panic condition due to the display FIFO
falling below the threshold, the priority at the NoC level is boosted
to the value set in the LCDIF_ARCACHE_CTRL register of i.MX8MP mediamix
blk-ctrl. Same as all other blk-ctrl registers this register is reset
when the domain is powered down. Initialize the panic hurry levels for
both LCIF interfaces to the maximium priority (same as downstream TF-A
and proven to work with the other priorities set in the interconnect
driver) when coming back from power down.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Setting the device name after it has been registered confuses the sysfs
cleanup paths. This has already been fixed for the imx8m-blk-ctrl driver in
b64b46fbaa1d ("Revert "soc: imx: imx8m-blk-ctrl: set power device name""),
but the same problem exists in imx8mp-blk-ctrl.
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Expose the high performance PLL as a regular Linux clock, so the
PCIe PHY can use it when there is no external refclock provided.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Allow the specific blk-ctrl instance to define a function, which will
be called during probe to provide device specific extensions.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently the dependencies of the blk-ctrl drivers are not fully
described in Kconfig, which can trip over the compile tests on
platforms where those drivers are not usually enabled. Add a
non user-selectable symbol to be describe those dependencies.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
NXP internal information shows that the PHY refclk is gated by the
GLOBAL_TX_PIX_CLK_EN bit, so to allow the PHY PLL to lock without the
LCDIF being already active, tie this bit to the HDMI_TX_PHY power
domain.
Fixes: e3442022f543 ("soc: imx: add i.MX8MP HDMI blk-ctrl")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are few major updates in the SoC specific drivers, mainly the usual
reworks and support for variants of the existing SoC. While this remains
Arm centric for the most part, the branch now also contains updates to
risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants
(MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the
soc ID, rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in
the memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive,
TI, Mediatek and Marvell SoC drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOSAZ8ACgkQmmx57+YA
GNmoDw/9Hdz2rx6TtdjA2eMKFt97bK0EgrQADT1d4lPQzXzZzFDC9ZxL0bwZRujZ
b8Q6WrMMgcRiWmzmRlxQWMWEdBU8Y0OzeYlo4lbyCSOV+UA2OA/eu6rm0chapBgM
1/lkquYLUUcB31wg+NmADoKy5Ejxj9SL1Va36Nvng4YpHDrYHKt4gPyCr/EV+KRO
Q8JpH7vEzQ0P5CGUzeri2UlYWDdF1GXmObqQGF8pq9s6Qz4ACe63r+eJFXAQFiXK
xewRK7PuvqmQWLVaEnN8dAcSna5P4aIGKOVjQyZjCCp6qTvfm4d2hxTl4dt9gVtt
vbQPiPQ5ORRzeMmW6wHxSIdy2QCa9CKQDXuMRoOWHfGMrAZQaxruISpcmHYv9Ug+
nSfedIEtxtmpGK2SZ1Mvndkezbb0o5QXZF4+kxqpiE/EaxVWmxiecmrUqyvJ5RVv
RuaZeMQpeOaWElnxb2P/T5uLuoHGhDdZ98HXICuCWPAitvA2rRK4Rv3dqTeclPLa
HR9gVYgZK3CSj+e9xbe5uczIc664bscRl9unghtB3UWkGTiLt2rroX4T2pTU/2xf
YvzDHC+f42NEkXUzcs4cZ87R8iY2hr0LmePY5/lqF9k6qx0Rc3syNc7q4N4EBxGC
2y5dDpKXfFL6fEV4YNeGpNcrwmCwnNppcePjmNvgrdtqmUUB/mY=
=heNV
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are few major updates in the SoC specific drivers, mainly the
usual reworks and support for variants of the existing SoC. While this
remains Arm centric for the most part, the branch now also contains
updates to risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants (MSM8956,
MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in the
memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
Mediatek and Marvell SoC drivers"
* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
...
Commit 7d981405d0fd ("soc: imx8m: change to use platform driver") ever
removed the dependency on bootloader for enabling OCOTP clock. It
helped to fix a kexec kernel hang issue. But unfortunately it caused
a regression on CAAM driver and got reverted.
This is the second try to enable the OCOTP clock by directly calling
clock API instead of indirectly enabling the clock via nvmem API.
Fixes: ac34de14ac30 ("Revert "soc: imx8m: change to use platform driver"")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In imx93_pd_probe(); if an error occurs, some resources need to be released
as done in the remove function.
Fixes: 0a0f7cc25d4a ("soc: imx: add i.MX93 SRC power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To keep the power domain on if usb remote wakeup is enabled, add the
GENPD_FLAG_ACTIVE_WAKEUP for otg1/2 of imx8mm/n.
Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Depending of the boot sequence 'bus' genpd could be probed after imx8m-blk-ctrl
which led driver probe to fail. Change the returned error to allow
to defer the probe in this case.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Add i.MX93 mediamix blk ctrl support.
i.MX93 mediamix blk ctrl has registers to set QoS(priority) value.
It support default QoS value and cfg QoS value. Set an initial
value from i.MX design team. If LCDIF/ISI/PXP wanna a different QoS
value in future, they could use interconnect to request bandwidth.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Support controlling power domain managed by System Reset
Controller(SRC). Current supported power domain is mediamix power
domain.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Simplify driver by using genpd_xlate_onecell instead of
driver specific xlate function.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dessert the PHY reset when powering up the domain and put it back
into reset when the domain is powered down.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MP has a VPU blk ctrl module that could supply clk and reset to
VPU, so add support for it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MP HDMI supports HDCP and HRV_MWR(HDMI RX Video Memory Write Master
for RXRX validation), so add them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In case the power domain clock are ungated before the reset is asserted,
the system might freeze completely. This is likely due to a device is an
undefined state being attached to bus, which sporadically leads to a bus
hang. Assert the reset before the clock are enabled to assure the device
is in defined state before being attached to bus.
Fixes: fe58c887fb8ca ("soc: imx: gpcv2: add support for optional resets")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 8239d67f59cf522dd4f7135392a2f9a3a25f9cff.
This change confuses the sysfs cleanup path since the rename is done
after the device registration.
Fixes: 8239d67f59cf ("soc: imx: imx8m-blk-ctrl: set power device name")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmLJJY8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM54iAgAjX40h6w2DOOyVZhM6VGBHmQIzfok
MiVRjPVLsEf55brvG6IwY4KnWWCOb9bcET7JxBhYsreUsLAC8255B//mLoiLZM4x
XfCFIaQ9XxnCyfzrJuXr1K0TuwlxVYAbVghcxYFpgCSpM9GwChhQstu1dgfQE3o3
p8OXlVol3bu0NN5JkbKd2t7e9P2EoCBIb9N2JIjnlxs81W63hoKEhRkhPd2CKBIN
gKEHrMf3CFFuLpSvwKKsNzwBj2y6LML413k9l7Wp5L/MEX0+Y0G/fuQ3i2fbzoDQ
OF2SQfngaeSRy8kbp1iZ+GCqfGGoBjwinZ7v2tYElH0pheR074mxIjKntQ==
=vt6q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FQvj
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.20:
- Update imx8m-blk-ctrl driver to print the name of the power domain,
so that the error message becomes more useful.
- Update the error messages in gpcv2 driver by printing the reason why
a regulator fails to be enabled or disabled.
- A series from Michael Walle to convert the guts driver from a platform
driver to an core_initcall for getting rid of all those global static
variables.
- A couple of follow-up fixes on guts driver series.
* tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
soc: fsl: guts: fix return value check in fsl_guts_init()
soc: imx: imx8m-blk-ctrl: Make error prints useful
soc: fsl: guts: add serial_number support
soc: fsl: guts: drop platform driver
soc: fsl: guts: use of_root instead of own reference
soc: fsl: guts: allocate soc_dev_attr on the heap
soc: fsl: guts: embed fsl_guts_get_svr() in probe()
soc: fsl: guts: remove module_exit() and fsl_guts_remove()
soc: fsl: guts: machine variable might be unset
soc: imx: gpcv2: print errno for regulator errors
Link: https://lore.kernel.org/r/20220709082951.15123-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Print the name of the power domain which failed to make the error
prints actually useful for finding the error.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Paul Elder <paul.elder@ideasonboard.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make debugging of power management issues easier by printing the reason
why a regulator fails to be enabled or disabled.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LCDIF2 has its own display clock, use this one.
Fixes: 07614fed00e9 ("soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
