Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().
While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.
So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.
We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.
Cc: stable@vger.kernel.org
Fixes: 0225a90981 ("drm/i915: Make cursor plane registers unlocked")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
(cherry picked from commit c1289a5c35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d939397303 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246fe
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
- avoid mentioning multi-GT case in commit description (Rodrigo),
- explain why we need to take a temporary wakeref unconditionally inside
i915_vma_pin_ww() (Rodrigo).
v4: Refresh on top of commit 5e4e06e408 ("drm/i915: Track gt pm
wakerefs") (Andi),
- for more easy backporting, split out removal of former insufficient
workarounds and move them to separate patches (Nirmoy).
- clean up commit message and description a bit.
v3: Identify root cause more precisely, and a commit to blame,
- identify and drop former workarounds,
- update commit message and description.
v2: Get the wakeref before VM mutex to avoid circular locking dependency,
- drop questionable Fixes: tag.
Fixes: d939397303 ("drm/i915: Remove the vma refcount")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f3c71b2ded)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It is misleading, if the intention was to also print something
in case it succeed it should have a different string.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 698e19da29 ("drm/i915: Skip pxp init if gt is wedged")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320210547.71937-1-jose.souza@intel.com
(cherry picked from commit d437099ab2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for
platform/subplatform defines"), boot freezes on a Jasper Lake tablet
(Librem 11), usually with graphical corruption on the eDP display,
but sometimes just a black screen. This commit was included in 6.6 and
later.
That commit was intended to refactor EHL and JSL macros, but the change
to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly
when it was only intended to match EHL.
It replaced:
return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
with:
return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) &&
IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
Remove IS_JASPERLAKE() to fix the regression.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Cc: stable@vger.kernel.org
Fixes: 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1ef4885931)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an
rpm wakeref. That results in lock inversion:
<4> [197.079335] ======================================================
<4> [197.085473] WARNING: possible circular locking dependency detected
<4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted
<4> [197.098096] ------------------------------------------------------
<4> [197.104231] prometheus-node/839 is trying to acquire lock:
<4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350
<4> [197.116939]
but task is already holding lock:
<4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915]
<4> [197.131543]
which lock already depends on the new lock.
...
<4> [197.507922] Chain exists of:
fs_reclaim --> >->reset.mutex --> &hwmon->hwmon_lock
<4> [197.518528] Possible unsafe locking scenario:
<4> [197.524411] CPU0 CPU1
<4> [197.528916] ---- ----
<4> [197.533418] lock(&hwmon->hwmon_lock);
<4> [197.537237] lock(>->reset.mutex);
<4> [197.543376] lock(&hwmon->hwmon_lock);
<4> [197.549682] lock(fs_reclaim);
...
<4> [197.632548] Call Trace:
<4> [197.634990] <TASK>
<4> [197.637088] dump_stack_lvl+0x64/0xb0
<4> [197.640738] check_noncircular+0x15e/0x180
<4> [197.652968] check_prev_add+0xe9/0xce0
<4> [197.656705] __lock_acquire+0x179f/0x2300
<4> [197.660694] lock_acquire+0xd8/0x2d0
<4> [197.673009] fs_reclaim_acquire+0xa1/0xd0
<4> [197.680478] __kmalloc+0x9a/0x350
<4> [197.689063] acpi_ns_internalize_name.part.0+0x4a/0xb0
<4> [197.694170] acpi_ns_get_node_unlocked+0x60/0xf0
<4> [197.720608] acpi_ns_get_node+0x3b/0x60
<4> [197.724428] acpi_get_handle+0x57/0xb0
<4> [197.728164] acpi_has_method+0x20/0x50
<4> [197.731896] acpi_pci_set_power_state+0x43/0x120
<4> [197.736485] pci_power_up+0x24/0x1c0
<4> [197.740047] pci_pm_default_resume_early+0x9/0x30
<4> [197.744725] pci_pm_runtime_resume+0x2d/0x90
<4> [197.753911] __rpm_callback+0x3c/0x110
<4> [197.762586] rpm_callback+0x58/0x70
<4> [197.766064] rpm_resume+0x51e/0x730
<4> [197.769542] rpm_resume+0x267/0x730
<4> [197.773020] rpm_resume+0x267/0x730
<4> [197.776498] rpm_resume+0x267/0x730
<4> [197.779974] __pm_runtime_resume+0x49/0x90
<4> [197.784055] __intel_runtime_pm_get+0x19/0xa0 [i915]
<4> [197.789070] hwm_energy+0x55/0x100 [i915]
<4> [197.793183] hwm_read+0x9a/0x310 [i915]
<4> [197.797124] hwmon_attr_show+0x36/0x120
<4> [197.800946] dev_attr_show+0x15/0x60
<4> [197.804509] sysfs_kf_seq_show+0xb5/0x100
Acquire the wakeref before the lock and hold it as long as the lock is
also held. Follow that pattern across the whole source file where similar
lock inversion can happen.
v2: Keep hardware read under the lock so the whole operation of updating
energy from hardware is still atomic (Guenter),
- instead, acquire the rpm wakeref before the lock and hold it as long
as the lock is held,
- use the same aproach for other similar places across the i915_hwmon.c
source file (Rodrigo).
Fixes: 1b44019a93 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> # v6.5+
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 71b2187714)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like the undelayed vblank gets signalled exactly when
the active period ends. That is a problem for DSB+VRR when
we are already in vblank and expect DSB to start executing
as soon as we send the push. Instead of starting, the DSB
just keeps on waiting for the undelayed vblank which won't
signal until the end of the next frame's active period,
which is far too late.
The end result is that DSB won't have even started
executing by the time the flips/etc. have completed.
We then wait for an extra 1ms, after which we terminate
the DSB and report a timeout:
[drm] *ERROR* [CRTC:80:pipe A] DSB 0 timed out waiting for idle (current head=0xfedf4000, head=0x0, tail=0x1080)
To fix this let's configure DSB to use the so called VRR
"safe window" instead of the undelayed vblank to trigger
the DSB vblank logic, when VRR is enabled.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-3-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 41429d9b68)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like TRANS_CHICKEN bit 31 means something totally different
depending on the platform:
TGL: generate VRR "safe window" for DSB
ADL/DG2: make TRANS_SET_CONTEXT_LATENCY effective with VRR
So far we've only set this on ADL/DG2, but when using DSB+VRR
we also need to set it on TGL.
And a quick test on MTL says it doesn't need this bit for either
of those purposes, even though it's still documented as valid
in bspec.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-2-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 810e4519a1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
(cherry picked from commit 7127128017)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reinstate commit 88b065943c ("drm/i915/dsi: Do display on
sequence later on icl+"), for the most part. Turns out some
machines (eg. Chuwi Minibook X) really do need that updated order.
It is also the order the Windows driver uses.
However we can't just undo the revert since that would again
break Lenovo 82TQ. After staring at the VBT sequences for both
machines I've concluded that the Lenovo 82TQ sequences look
somewhat broken:
- INIT_OTP is not present at all
- what should be in INIT_OTP is found in DISPLAY_ON
- what should be in DISPLAY_ON is found in BACKLIGHT_ON
(along with the actual backlight stuff)
The Chuwi Minibook X on the other hand has a full complement
of sequences in its VBT.
So let's try to deal with the broken sequences in the
Lenovo 82TQ VBT by simply swapping the (non-existent)
INIT_OTP sequence with the DISPLAY_ON sequence. Thus we
execute DISPLAY_ON when intending to execute INIT_OTP,
and execute nothing at all when intending to execute
DISPLAY_ON. That should be 100% equivalent to the
revert, for such broken VBTs.
Cc: stable@vger.kernel.org
Fixes: 6992eb815d ("Revert "drm/i915/dsi: Do display on sequence later on icl+"")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 94ae4612ea)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
AuxCCS framebuffers don't work on Xe driver hence disable them
from plane capabilities until they are fixed. FlatCCS framebuffers
work and they are left enabled. CCS is left untouched for i915
driver.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/933
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228140225.858145-1-juhapekka.heikkila@gmail.com
(cherry picked from commit b7232a730f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like I misplaced a few hunks when I moved the audio
enable/disable out from the encoder enable/disable hooks.
So we are now doing a double audio enable/disable on SDVO
and g4x+ DP. Probably harmless as doing it twice shouldn't
really change anything, but let's do it just once, as intended.
Fixes: cff742cc68 ("drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher up")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226193251.29619-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 315bd0a082)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit
8117961d98fb2 ("x86/efi: Disregard setup header of loaded image")
dropped the memcopy of the image's setup header into the boot_params
struct provided to the core kernel, on the basis that EFI boot does not
need it and should rely only on a single protocol to interface with the
boot chain. It is also a prerequisite for being able to increase the
section alignment to 4k, which is needed to enable memory protections
when running in the boot services.
So only the setup_header fields that matter to the core kernel are
populated explicitly, and everything else is ignored. One thing was
overlooked, though: the initrd_addr_max field in the setup_header is not
used by the core kernel, but it is used by the EFI stub itself when it
loads the initrd, where its default value of INT_MAX is used as the soft
limit for memory allocation.
This means that, in the old situation, the initrd was virtually always
loaded in the lower 2G of memory, but now, due to initrd_addr_max being
0x0, the initrd may end up anywhere in memory. This should not be an
issue principle, as most systems can deal with this fine. However, it
does appear to tickle some problems in older UEFI implementations, where
the memory ends up being corrupted, resulting in errors when unpacking
the initramfs.
So set the initrd_addr_max field to INT_MAX like it was before.
Fixes: 8117961d98fb2 ("x86/efi: Disregard setup header of loaded image")
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid a type mismatch warning in max() by switching to max_t() and
providing the type explicitly.
Fixes: 3cb4a48275 ("efi/libstub: fix efi_random_alloc() ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add standalone includes for BUG_ON and BUILD_BUG_ON to avoid build failure
after linux-next include refactoring.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308144643.137831-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 4df6ac223c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449 ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Octeontx2 MAC block (CGX) has separate data paths (SMU and GMP) for
different speeds, allowing for efficient data transfer.
The previous patch which added pause frame configuration has a bug due
to which pause frame feature is not working in GMP mode.
This patch fixes the issue by configurating appropriate registers.
Fixes: f7e086e754 ("octeontx2-af: Pause frame configuration at cgx")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326052720.4441-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.
Fixes: bb4f6bffe3 ("net: lan743x: Add PCI11010 / PCI11414 device IDs")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Clang 14 in an (essentially) defconfig loongarch64 build for next-20240327
reports [1]:
drivers/gpu/drm/qxl/qxl_ioctl.c:148:14: error: variable 'num_relocs'
set but not used [-Werror,-Wunused-but-set-variable]
The variable was originally used in the `out_free_bos` label, but commit
74d9a6335d ("drm/qxl: Simplify cleaning qxl processing command")
removed the use that happened in that label.
Thus remove the unused variable.
Fixes: 74d9a6335d ("drm/qxl: Simplify cleaning qxl processing command")
Closes: https://lore.kernel.org/lkml/CANiq72kqqQfUxLkHJYqeBAhpc6YcX7bfR96gmmbF=j8hEOykqw@mail.gmail.com/ [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240327175556.233126-2-ojeda@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Justin Chen says:
====================
net: bcmasp: phy managements fixes
Fix two issues.
- The unimac may be put in a bad state if PHY RX clk doesn't exist
during reset. Work around this by bringing the unimac out of reset
during phy up.
- Remove redundant phy_{suspend/resume}
====================
Link: https://lore.kernel.org/r/20240325193025.1540737-1-justin.chen@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_{suspend/resume} is redundant. It gets called from phy_{stop/start}.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The unimac requires the PHY RX clk during reset or it may be put
into a bad state. Bring up the unimac after link up to ensure the
PHY RX clk exists.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct.
Reported-by: William Wortel <wwortel@dorpstraat.com>
Cc: <stable@vger.kernel.org>
Fixes: 25d2ba9400 ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=sQm5
-----END PGP SIGNATURE-----
Merge tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 reject destroy chain command to delete device hooks in netdev
family, hence, only delchain commands are allowed.
Patch #2 reject table flag update interference with netdev basechain
hook updates, this can leave hooks in inconsistent
registration/unregistration state.
Patch #3 do not unregister netdev basechain hooks if table is dormant.
Otherwise, splat with double unregistration is possible.
Patch #4 fixes Kconfig to allow to restore IP_NF_ARPTABLES,
from Kuniyuki Iwashima.
There are a more fixes still in progress on my side that need more work.
* tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
====================
Link: https://lore.kernel.org/r/20240328031855.2063-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Sz5u
-----END PGP SIGNATURE-----
Merge tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2024-03-27
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 26 insertions(+), 3 deletions(-).
The main changes are:
1) Fix bloom filter value size validation and protect the verifier
against such mistakes, from Andrei.
2) Fix build due to CONFIG_KEXEC_CORE/CRASH_DUMP split, from Hari.
3) Update bpf_lsm maintainers entry, from Matt.
* tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
====================
Link: https://lore.kernel.org/r/20240328012938.24249-1-alexei.starovoitov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is stopping me building here for some reason,
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c: In function ‘i915_unaligned_memcpy_from_wc’:
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c:33:25: error: implicit declaration of function ‘BUG_ON’; did you mean ‘CI_BUG_ON’? [-Werror=implicit-function-declaration]
33 | #define CI_BUG_ON(expr) BUG_ON(expr)
| ^~~~~~
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c:144:9: note: in expansion of macro ‘CI_BUG_ON’
144 | CI_BUG_ON(!i915_has_memcpy_from_wc());
| ^~~~~~~~~
engage maintainer overrides :-)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The SVA code checks that the PASID is valid for the device when assigning
the PASID to the MM, but the normal PAGING related path does not check it.
Devices that don't support PASID or PASID values too large for the device
should not invoke the driver callback. The drivers should rely on the
core code for this enforcement.
Fixes: 1660370455 ("iommu: Add attach/detach_dev_pasid iommu interfaces")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-460705442b30+659-iommu_check_pasid_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix swabbing of the STE fields in the unlikely event of running on a
big-endian machine.
- Fix setting of STE.SHCFG on hardware that doesn't implement support
for attribute overrides.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmYEI7AQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCJ1B/44AGPbxM0dgsq64soxtLcHMeG4p1Hr9jQn
xBkWCHu/F4smMGYZVNLV4buU9hYNnTmz6PjyJnRztjCrjs6RaChO8hTfo3PVdM52
bDSLHyP974j2mCwoFQctvN1G7+z4ps9IfXChciuQB4O22Pjtb35OHiIQengc3Sbg
mJn/W6v1OX+gp7xRzFcwsKfksEBdWbVjSvPoGoXx8QJBQSuAxzcLCw/8L4yg84Jb
CPn0FfhfEAg7S0203QR1p7CJ3LwXgVmGceAsALvrUv3s0oA7ApsM6a+SU6FoKEHL
5uSFRSdknSD/CcQ+3+BfUv4AcvHImsL1j9q2u45sil5rFCyneLIe
=CxUI
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.9
- Fix swabbing of the STE fields in the unlikely event of running on a
big-endian machine.
- Fix setting of STE.SHCFG on hardware that doesn't implement support
for attribute overrides.
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE6rM8lpABPHM5FqyDm6KlpjDL6lMFAmYC/7sZHGx1Y2FzLmRl
bWFyY2hpQGludGVsLmNvbQAKCRCboqWmMMvqU9aXD/9SAHCMtjd94gYJ9bqhSByP
E0lxd6dRIVOYzlQDkIz/sXvwhLoKDNuJzMPxSCclZYyZv9kYSjqEB877tLh3Xzm2
EHZlZuwEzOor6V7/Q6jmajhCDVS2LUziGqIICpIFlF0eZlmqOOw/g6JDGhjoF7ID
woNsiiUeha7TUXFGiRWhPOrMza99XX/LanMT+U+cz2v7XjVFun5CkjQnAzBrw5aY
iMEzmdu5Xflkl9HgaWmSrtJxeLVVgO1M70Zs05HHzy1UpqnDx6w54k/OoHGsGDRn
oDa3b/eIxp93FJvnv7teyBBhrNjqwIPxzUyFai6rffBt+sVTV447m8ocsKbQI0l0
oJQZFRQ3pKByQkqX5C8Ngj6802FaAx3oDM3UkZ+tWjzRilRVQK31nLS2VQR/3Yzj
/WpA2OsmxiwUPGsesteF4iJRq9TYbHsDsaht6B2y0EkIssLdcSPq0ygFxoCSMxL2
xWKa07z1Au05eTpADAqwXbhSK4WlLvfu5GY8UrC9DDwcCXsUI5P+87praZ0dxNiY
rUBC5gBNGqg834w1g66jPCe3PagXTvaxlP7jbi1qHsGRZvXvTj0wbiOSiQSrnFJO
n9NzJjMRLL6zi8N+ztMeBiYmBJQUHWOr069CYhcRpfdO20s7nWHD/gp+Z1bJl/Wx
IhQTcBB6Rz4ShfgmYu5a9A==
=1jQx
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-03-26' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix build on mips
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a47jbz45nry4gjmtyresaraakwnasgngncltmrshbfkx25mhzu@bvay7j3ed7ir
- Add a new reviewer Sandeep Dhavale to build a healthier community;
- Drop experimental warning for FSDAX.
-----BEGIN PGP SIGNATURE-----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=+ZW9
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer Sandeep Dhavale to build a healthier community
- Drop experimental warning for FSDAX
* tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add myself as reviewer
erofs: drop experimental warning for FSDAX
Skip hook unregistration when adding or deleting devices from an
existing netdev basechain. Otherwise, commit/abort path try to
unregister hooks which not enabled.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netdev basechain updates are stored in the transaction object hook list.
When setting on the table dormant flag, it iterates over the existing
hooks in the basechain. Thus, skipping the hooks that are being
added/deleted in this transaction, which leaves hook registration in
inconsistent state.
Reject table flag updates in combination with netdev basechain updates
in the same batch:
- Update table flags and add/delete basechain: Check from basechain update
path if there are pending flag updates for this table.
- add/delete basechain and update table flags: Iterate over the transaction
list to search for basechain updates from the table update path.
In both cases, the batch is rejected. Based on suggestion from Florian Westphal.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Report EOPNOTSUPP if NFT_MSG_DESTROYCHAIN is used to delete hooks in an
existing netdev basechain, thus, only NFT_MSG_DELCHAIN is allowed.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As mentioned in commit 397586506c ("modpost: Add '.ltext' and
'.ltext.*' to TEXT_SECTIONS"), modpost can result in a segmentation
fault due to a NULL pointer dereference in default_mismatch_handler().
find_tosym() can return the original symbol pointer instead of NULL
if a better one is not found.
This fixes the reported segmentation fault.
Fixes: a23e7584ec ("modpost: unify 'sym' and 'to' in default_mismatch_handler()")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3a6dd5f614 ("riscv: remove unneeded #include
<asm-generic/export.h>") removed the last use of
include/asm-generic/export.h.
This deprecated header can go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The boolean 'choice' is used to list exclusively selected config
options.
You must not add a dependency between choice members, because such a
dependency would create an invisible entry.
In the following test case, it is impossible to choose 'C'.
[Test Case 1]
choice
prompt "Choose one, but how to choose C?"
config A
bool "A"
config B
bool "B"
config C
bool "C"
depends on A
endchoice
Hence, Kconfig shows the following error message:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol C
Kconfig:10: symbol C is part of choice A
Kconfig:4: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
However, Kconfig does not report anything for the following similar code:
[Test Case 2]
choice
prompt "Choose one, but how to choose B?"
config A
bool "A"
config B
bool "B"
depends on A
config C
bool "C"
endchoice
This is because menu_finalize() reparents the menu tree when an entry
depends on the preceding one.
With reparenting, the menu tree:
choice
|- A
|- B
\- C
... will be transformed into the following structure:
choice
|- A
| \- B
\- C
Consequently, Kconfig considers only 'A' and 'C' as choice members.
This behavior is awkward. The second test case should be an error too.
This commit stops reparenting inside a choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYEbzoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsjZwgApoOcTn/mkX7DEViByMUpOrdNYqkJh+Tv
RkDDqhbA97i+zlxWp1dwtdfn0CYEcCW2XBucrfDNZMcR/cfXy2Wgdr6BD/FG9S2D
oQX6QQijO7g9uqNgDfIVAC0ftJEeWkM7YUhqNDVR751gjy2WOOJqPtSgNGd873By
P0rbHyfykHMzyYbwlzMLosO3RigefD1p1qkkODPf2OMo5A4tL1gL9AfEk3Kef9sf
9JHHWCLR378sm2sMpGw2Lxw4ypazl08ABu1yAWJk6Xipn80D/b08YUH/1yiKuq22
JrxhllJu2nqaHxXOzje2WEapTBz9tpTAwigOUQJiVZWm6ii19giGng==
=89Ft
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two of these fix syzbot reported issues, and
the other fixes a unused variable in some configurations.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElpbw0ZalkJikytFRiP/V+0pf/5gFAmYEjyAACgkQiP/V+0pf
/5jrDhAAkrEkFry9Zp7txMNG7fyRVRW8BPkvCUbORBdmLm01lswTnvHDT5pbSYcf
Z3KxSpo0DvO2G3XEHQHQN24Sbx78Xg8XssXGFc0j1/hQbGpwIyXM/NTa3VVnfmwH
lV2ysLa5zCR81k0hu8QzGe8DSOFsyE9oz3ABE7nCjmQsOI0zgyOvn7Uy1rwT5B11
lBYN4rotl2Ie1wPoVTf8PNbeAWtuVR3FN9GTSvZuNDFbYjYEv0zFangxXIBFhn2g
pUJ22C6CYenhLzTKBRVW/CcSxPVVS4jFok1nws07MmlXozrbklPYHuN6XQYFetLt
wtnZxmUmy1u4pmpG2xPziUOGb7wdm6cDC1aIrcYPlbk/9U2iYHuVgQz0WOcEIbA3
g5LrgCpUZO8UPxEvtFYDq9oUAhxhjf6BI7/rR0fNWp8JgJ0scz3d/e+Q/srWWr23
Pej+10N5JijTEuD39BUnWy/yTz0WVBg1nP/C44buB0zSWJbxiPOJd0imSW6ipoIk
Onr3FmhnRSiIfuUKEH/jI+QsqKzZTdBe9e3+SYBEg4KXvM3e1ltJgDs+BIdWbo00
ih/jkZL7iX+uzkOdVR3o/1KagkwHTcU8P+4i8wELD7+CquQXvsedfqeTmz5JvNIR
9Df1Gu1xCeINn6jnlSaVAonnCi1awJoaxFW+azCb+q5MP8lP6IU=
=1ev6
-----END PGP SIGNATURE-----
Merge tag '9p-fixes-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"Two of these fix syzbot reported issues, and the other fixes a unused
variable in some configurations"
* tag '9p-fixes-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix uninitialized values during inode evict
fs/9p: remove redundant pointer v9ses
fs/9p: fix uaf in in v9fs_stat2inode_dotl
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmYEfJYACgkQxWXV+ddt
WDucIg/+IupuqdLKnj6bepxX/VufnFAjecD3sRgZQQLIMfm3MQX3TzbNoPYEiAGU
tNG6jxYgkGRoyhN3aIQnsJmRFje5epYjNA5+ueUNT2/KfyKonnS2TIKQt6u7XBls
fl4SCTSNRX7w/QUNUWwyY5/86yzV4F8w19X5nVOKcp7Nz3hUBdeDZWAmMlYyHuFW
N2YRyNdCxB4Y0U9g1vgI63wFjOac0F+7RTHGsDH7ueOZ2dbtDM38lHBoCbdX3jmy
5nG7wVJZp2H/zCmzrVQJ897CMfr3h9r9Kxx8EE3JDJaJ5sMMaRh361rgsZTaGsjz
SwUzT6Z0u0hsBANSTOUZixhfX5sqArmemG+XpFu6Rq+732DqS+c4vWRSu7c8Rc8i
+4HIQNsjJqm/d1u2IyxXfuqSbaULLnyYQ8rdEx3o2AM37JnuTvOWoB+v/JqPb9TI
aG+bOPvg7GM9Sl3IoM5sR+j3bEebranZbUF+UiDEujZJiY+uiw3vMbFvyOBRWaUU
ODTpNoyCmz94mWg79hyosOjM9A/NCEkRH4oSc+YeqOvzTIBG3V+D3HxN/DX4FVTy
VDxMdptu0aPIEkUQ3nvsj4t3OKgj1w9rxZFpRYH33zJVvRqZ8VrgtC9V6zgPv3h7
suQL4s4i4EiIgAk2Z0OR23wDwg1TwXVWLGErfQVHslvhl/a2Qb4=
=Lhhp
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix race when reading extent buffer and 'uptodate' status is missed
by one thread (introduced in 6.5)
- do additional validation of devices using major:minor numbers
- zoned mode fixes:
- use zone-aware super block access during scrub
- fix use-after-free during device replace (found by KASAN)
- also delete zones that are 100% unusable to reclaim space
- extent unpinning fixes:
- fix extent map leak after error handling
- print correct range in error message
- error code and message updates
* tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race in read_extent_buffer_pages()
btrfs: return accurate error code on open failure in open_fs_devices()
btrfs: zoned: don't skip block groups with 100% zone unusable
btrfs: use btrfs_warn() to log message at btrfs_add_extent_mapping()
btrfs: fix message not properly printing interval when adding extent map
btrfs: fix warning messages not printing interval at unpin_extent_range()
btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache()
btrfs: validate device maj:min during open
btrfs: zoned: fix use-after-free in do_zone_finish()
btrfs: zoned: use zone aware sb location for scrub
or aren't considered suitable for backporting.
zswap figures prominently in the post-6.8 issues - folloup against the
large amount of changes we have just made to that code.
Apart from that, all over the map.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZgRltQAKCRDdBJ7gKXxA
jvxhAP0SCuKnuzs/K8BTnO4CHXJPPXMhdWFbFjUOKoNToAwRJQEA0+5NvpAEtbov
ljCkRZ3hXHJ6D5MH2vXSJIbkjekz/gg=
=0j71
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Various hotfixes. About half are cc:stable and the remainder address
post-6.8 issues or aren't considered suitable for backporting.
zswap figures prominently in the post-6.8 issues - folloup against the
large amount of changes we have just made to that code.
Apart from that, all over the map"
* tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
crash: use macro to add crashk_res into iomem early for specific arch
mm: zswap: fix data loss on SWP_SYNCHRONOUS_IO devices
selftests/mm: fix ARM related issue with fork after pthread_create
hexagon: vmlinux.lds.S: handle attributes section
userfaultfd: fix deadlock warning when locking src and dst VMAs
tmpfs: fix race on handling dquot rbtree
selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM
mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion
ARM: prctl: reject PR_SET_MDWE on pre-ARMv6
prctl: generalize PR_SET_MDWE support check to be per-arch
MAINTAINERS: remove incorrect M: tag for dm-devel@lists.linux.dev
mm: zswap: fix kernel BUG in sg_init_one
selftests: mm: restore settings from only parent process
tools/Makefile: remove cgroup target
mm: cachestat: fix two shmem bugs
mm: increase folio batch size
mm,page_owner: fix recursion
mailmap: update entry for Leonard Crestez
init: open /initrd.image with O_LARGEFILE
selftests/mm: Fix build with _FORTIFY_SOURCE
...
Adding myself in place of both Brendan and Florent as both have since
moved on from working on the BPF LSM and will no longer be devoting
their time to maintaining the BPF LSM.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/ZgMhWF_egdYF8t4D@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are one or two cases where CREATE_SESSION returns
NFS4ERR_DELAY in order to force the client to wait a bit and try
CREATE_SESSION again. However, after commit e4469c6cc6 ("NFSD: Fix
the NFSv4.1 CREATE_SESSION operation"), NFSD caches that response in
the CREATE_SESSION slot. Thus, when the client resends the
CREATE_SESSION, the server always returns the cached NFS4ERR_DELAY
response rather than actually executing the request and properly
recording its outcome. This blocks the client from making further
progress.
RFC 8881 Section 15.1.1.3 says:
> If NFS4ERR_DELAY is returned on an operation other than SEQUENCE
> that validly appears as the first operation of a request ... [t]he
> request can be retried in full without modification. In this case
> as well, the replier MUST avoid returning a response containing
> NFS4ERR_DELAY as the response to an initial operation of a request
> solely on the basis of its presence in the reply cache.
Neither the original NFSD code nor the discussion in section 18.36.4
refer explicitly to this important requirement, so I missed it.
Note also that not only must the server not cache NFS4ERR_DELAY, but
it has to not advance the CREATE_SESSION slot sequence number so
that it can properly recognize and accept the client's retry.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Fixes: e4469c6cc6 ("NFSD: Fix the NFSv4.1 CREATE_SESSION operation")
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fscache emits a lot of duplicate cookie warnings with cifs because the
index key for the fscache cookies does not include everything that the
cifs_find_inode() function does. The latter is used with iget5_locked() to
distinguish between inodes in the local inode cache.
Fix this by adding the creation time and file type to the fscache cookie
key.
Additionally, add a couple of comments to note that if one is changed the
other must be also.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
