Add a driver operation to allow preemptive cleanup of ufile HW resources
before the standard ufile cleanup flow begins. Thus, expediting the
final cleanup phase which leads to fast teardown overall.
This allows the use of driver specific clean up procedures to make the
cleanup process more efficient.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/cabe00d75132b5732cb515944e3c500a01fb0b4a.1730373303.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix a race condition when creating a lag bond in active backup
mode where after the bond creation the backup slave was
attached to the IB device, instead of the active slave.
This caused stale entries in the GID table, as the gid updating
mechanism relies on ib_device_get_netdev(), which would return
the backup slave.
Send an MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE
event when activating the lag, additionally to when modifying
the lag. This ensures that eventually the active netdevice is
stored in the bond IB device.
When handling this event remove the GIDs of the previously
attached netdevice in this port and rescan the GIDs of the
newly attached netdevice.
This ensures that eventually the active slave netdevice is
correctly stored in the IB device port. While there might be
a brief moment where the backup slave GIDs appear in the GID
table, it will eventually stabilize with the correct GIDs
(of the bond and the active slave).
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/91fc2cb24f63add266a528c1c702668a80416d9f.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rdma_roce_rescan_port() scans all network devices in
the system and adds the gids if relevant to the RoCE device
port. When not in bonding mode it adds the GIDs of the
netdevice in this port. When in bonding mode it adds the
GIDs of both the port's netdevice and the bond master
netdevice.
Export roce_del_all_netdev_gids(), which removes all GIDs
associated with a specific netdevice for a given port.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/674d498da4637a1503ff1367e28bd09ff942fd5e.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move dev_put() call to occur directly after the blocking
notifier, instead of within the event handler.
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/342ff94b3dcbb07da1c7dab862a73933d604b717.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support QP with out-of-order (OOO) capabilities enabled.
This allows WRs on the receiver side of the QP to be consumed OOO,
permitting the sender side to transmit messages without guaranteeing
arrival order on the receiver side.
When enabled, the completion ordering of WRs remains in-order,
regardless of the Receive WRs consumption order.
RDMA Read and RDMA Atomic operations on the responder side continue to
be executed in-order, while the ordering of data placement for RDMA
Write and Send operations is not guaranteed.
Atomic operations larger than 8 bytes are currently not supported.
Therefore, when this feature is enabled, the created QP restricts its
atomic support to 8 bytes at most.
In addition, when querying the device, a new flag is returned in
response to indicate that the Kernel supports OOO QP.
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/06ac609a5f358c8fb0a090d22c61a2f9329d82e6.1725362773.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adding support for a per device debugfs folder for exporting
some of the device specific debug information.
Added support to get QP info for now. The same folder can be
used to export other debug features in future.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support interfaces to get the raw data for each of
the resources. Use this interface to get some of the
HW structures from active resources.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implements support for querying the hardware resource
contexts. This raw data can be used for the debugging
of the field issues.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow users to dump driver specific resource details when
queried through rdma tool. This supports the driver data
for QP, CQ, MR and SRQ.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730428483-17841-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Same with commit e375b9c92985 ("RDMA/cxgb4: Set queue pair state when
being queried"). The API for ib_query_qp requires the driver to set
cur_qp_state on return, add the missing set.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20241031092019.2138467-1-liujian56@huawei.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set port link speed and width based on max bandwidth acquired from the
device instead of using constant 100 Gbps. Use a default value in case
the device didn't set the field.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20241030093006.21352-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b78 ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The hem code is executed before ib_dev is registered, so use dev_*
printing instead of ibdev_* to avoid log like this:
(null): set HEM address to HW failed!
Fixes: 2f49de21f3e9 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The sub-directory of hns_roce debugfs is named after the device's
kernel name currently, but it will be inconvenient to use when
the device is renamed.
Modify the name to pci name as users can always easily find the
correspondence between an RDMA device and its pci name.
Fixes: eb7854d63db5 ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
QP needs to be modified to IB_QPS_ERROR to trigger HW flush cqe. But
when this process races with destroy qp, the destroy-qp process may
modify the QP to IB_QPS_RESET first. In this case flush cqe will fail
since it is invalid to modify qp from IB_QPS_RESET to IB_QPS_ERROR.
Add lock and bit flag to make sure pending flush cqe work is completed
first and no more new works will be added.
Fixes: ffd541d45726 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-3-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Access flag definition in MR and QP is different
in FW. Currently both reg/bind MR and modify/query QP uses
the same flags. Add a different function to map
the QP access flags for newer adapters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RoCE message rate performance is heavily degraded
without the use of cq coalescing. With proper coalescing,
message rates get better. Furthermore, coalescing
significantly reduces contention on the PCIe Root
Complex/Memory subsystems.
Add the changes to configure CQ rx colascing parameters
based on adapter revision when CQ is created.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Modify QP improvements are for state transitions
from INIT -> RTR and RTR -> RTS.
In order to support the Modify QP Optimization feature,
the driver is expected to check for the feature support
in the CMDQ_QUERY_FUNC and register its support for this
feature with the FW in CMDQ_INITIALIZE_FIRMWARE.
Additionally, the driver is required to specify the new
fields and attribute masks for the transitions as follows:
1. INIT -> RTR:
- New fields: srq_used, type.
- enable srq_used when RC QP is configured to use SRQ.
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS,
CMDQ_MODIFY_QP_MODIFY_MASK_PKEY
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_PKEY,
CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
2. RTR -> RTS:
- New fields: type
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Tushar Rane <tushar.rane@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need for a special txqueuelen value for IPoIB.
This value represents the qdisc size which is not related to the SQ
size, and the default value provided by the stack (DEFAULT_TX_QUEUE_LEN)
is sufficient for typical use cases.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/cc97764b5a8def4ea879b371549a5867fe75c756.1728555243.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Using modify QP with AH attributes and IB_QP_AV flag set doesn't make
much sense for connectionless QP types like SRD. Add SL parameter to EFA
create QP user ABI and pass it to the device.
Link: https://patch.msgid.link/r/20241015174242.3490-3-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
clear_all_interrupts() in hw/hfi1/chip.c is currently global
but only used in the same file, so make it static.
There are also 'clear_all_interrupts' functions in i2c-nomadik and
emif.c but fortunately they're already static.
(Build and boot tested only, I don't have this hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241007235327.128613-1-linux@treblig.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When HW is being reset, userspace should not ring doorbell otherwise
it may lead to abnormal consequence such as RAS.
Disassociate mmap pages for all uctx to prevent userspace from ringing
doorbell to HW. Since all resources will be destroyed during HW reset,
no new mmap is allowed after HW reset is completed.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Provide a new api rdma_user_mmap_disassociate() for drivers to
disassociate mmap pages for a device.
Since drivers can now disassociate mmaps by calling this api,
introduce a new disassociation_lock to specifically prevent
races between this disassociation process and new mmaps. And
thus the old hw_destroy_rwsem is not needed in this api.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts, hfi,
erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New "rdma monitor" netlink mechanism
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZvGZowAKCRCFwuHvBreF
YcvbAP9abSxZte3zzG1ZJ/6BShSCGJvu4RMMMQI6wNJWZZiJ5wEA18MdaWzGFS8O
BzP48Z/0VGsd2MOfNX4JeyYIs7SNYQA=
=FXLo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/core/nldev.c:2795:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
2795 | default:
| ^
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240916-rdma-fix-clang-fallthrough-nl_notify_err_msg-v1-1-89de6a7423f1@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There are several error cases where hns_roce_create_ah() returns
directly without jumping to sw stat path, thus leading to a problem
that the ah error counter does not increase.
Fixes: ee20cc17e9d8 ("RDMA/hns: Support DSCP")
Fixes: eb7854d63db5 ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240912115700.2016443-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If the FW crashes, L2 driver gets notified and it notifies
the RoCE driver. Currently driver doesn't re-initialize the
device. Add support for re-initialize the RoCE device.
RoCE device is removed and re-attached in the ulp_stop and
ulp_start respectively. The recovery logic expects the RoCE
driver to be registered with L2 driver while its being removed.
So the driver avoids unregistering with L2 driver in the
recovery path.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adding and removing device need to be handled from multiple contexts
when Firmware error recovery is supported. So group all the add and remove
operations to add_device and remove_device function.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While registering with the L2 for ULP operations, use the
aux device pointer as the handle. Aux device has
the data bnxt_re_en_dev_info, which is used to
store required information for the bnxt_re_suspend
and bnxt_re_resume functions.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rdev will be destroyed and recreated during the FW error
recovery scenarios. So to keep the state, if any, use an
en_info structure which gets created/freed based on auxiliary
device initialization/de-initialization.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1726027710-2292-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Extend the "rdma sys" command to display whether RDMA
monitoring is supported.
RDMA monitoring is not supported in mlx4 because it does
not use the ib_device_set_netdev() API, which sends the
RDMA events.
Example output for kernel where monitoring is supported:
$ rdma sys show
netns shared privileged-qkey off monitor on copy-on-fork on
Example output for kernel where monitoring is not supported:
$ rdma sys show
netns shared privileged-qkey off monitor off copy-on-fork on
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce a new netlink command to allow rdma event monitoring.
The rdma events supported now are IB device
registration/unregistration and net device attachment/detachment.
Example output of rdma monitor and the commands which trigger
the events:
$ rdma monitor
$ rmmod mlx5_ib
[UNREGISTER] dev 1 rocep8s0f1
[UNREGISTER] dev 0 rocep8s0f0
$ modprobe mlx5_ib
[REGISTER] dev 2 mlx5_0
[NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2
[REGISTER] dev 3 mlx5_1
[NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
[UNREGISTER] dev 2 rocep8s0f0
[REGISTER] dev 4 mlx5_0
[NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2
$ echo 4 > /sys/class/net/eth2/device/sriov_numvfs
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7
[REGISTER] dev 5 mlx5_0
[NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8
[REGISTER] dev 6 mlx5_0
[NETDEV_ATTACH] dev 6 mlx5_0 port 1 netdev 12 eth9
[REGISTER] dev 7 mlx5_0
[NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10
[REGISTER] dev 8 mlx5_0
[NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11
$ echo 0 > /sys/class/net/eth2/device/sriov_numvfs
[UNREGISTER] dev 5 rocep8s0f0v0
[UNREGISTER] dev 6 rocep8s0f0v1
[UNREGISTER] dev 7 rocep8s0f0v2
[UNREGISTER] dev 8 rocep8s0f0v3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 2
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 4
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 5
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The IB layer provides a common interface to store and get net
devices associated to an IB device port (ib_device_set_netdev()
and ib_device_get_netdev()).
Previously, mlx5_ib stored and managed the associated net devices
internally.
Replace internal net device management in mlx5_ib with
ib_device_set_netdev() when attaching/detaching a net device and
ib_device_get_netdev() when retrieving the net device.
Export ib_device_get_netdev().
For mlx5 representors/PFs/VFs and lag creation we replace the netdev
assignments with the IB set/get netdev functions.
In active-backup mode lag the active slave net device is stored in the
lag itself. To assure the net device stored in a lag bond IB device is
the active slave we implement the following:
- mlx5_core: when modifying the slave of a bond we send the internal driver event
MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE.
- mlx5_ib: when catching the event call ib_device_set_netdev()
This patch also ensures the correct IB events are sent in switchdev lag.
While at it, when in multiport eswitch mode, only a single IB device is
created for all ports. The said IB device will receive all netdev events
of its VFs once loaded, thus to avoid overwriting the mapping of PF IB
device to PF netdev, ignore NETDEV_REGISTER events if the ib device has
already been mapped to a netdev.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The caller of ib_device_get_netdev() relies on its result to accurately
match a given netdev with the ib device associated netdev.
ib_device_get_netdev returns NULL when the IB device associated
netdev is unregistering, preventing the caller of matching netdevs properly.
Thus, remove this optimization and return the netdev even if
it is undergoing unregistration, allowing matching by the caller.
This change ensures proper netdev matching and reference count handling
by the caller of ib_device_get_netdev/ib_device_set_netdev API.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-5-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
phys_port_cnt of the IB device must be initialized before calling
ib_device_set_netdev().
Previously, phys_port_cnt was initialized in the mlx5_ib init function.
Remove this initialization to allow setting it separately, providing
the flexibility to call ib_device_set_netdev before registering the
IB device.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6da ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check if RoCE LAG is active before calling the LAG layer for netdev.
This clarifies if LAG is active. No behavior changes with this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-2-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Consider also the query_vuid cap before enabling the data_direct
functionality.
This may prevent a syndrome from the FW in case the query_vuid command
is not supported. (e.g. migratable VF)
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/274c4f6f1ac0b1078243dd296695a49dbe58e7d1.1725907637.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
