The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Texas Instruments Wl1273 FM Rad".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without this, I see a randconfig link failure:
aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_remove':
rcar_drif.c:(.text+0x2a8): undefined reference to `v4l2_async_notifier_unregister'
aarch64-linux-ld: rcar_drif.c:(.text+0x2b0): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_sdr_probe':
rcar_drif.c:(.text+0x1444): undefined reference to `v4l2_async_notifier_init'
aarch64-linux-ld: rcar_drif.c:(.text+0x14a0): undefined reference to `v4l2_async_notifier_register'
aarch64-linux-ld: rcar_drif.c:(.text+0x14d8): undefined reference to `v4l2_async_notifier_cleanup'
aarch64-linux-ld: rcar_drif.c:(.text+0x15a8): undefined reference to `__v4l2_async_notifier_add_fwnode_subdev'
I could not easily figure out when this was introduced, as this code
has not changed in a while but I only saw the problem recently.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the scaler subdevice to accept setting the resolution of the source
pad (previously the source resolution would always be 3 times the sink for
both dimensions). Now any resolution can be set at src (even smaller ones)
and the sink video will be scaled to match it.
Test example: With the vimc module up (using the default vimc topology)
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
--stream-to=test.raw
The result will be a cropped stream that can be checked with the command
ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
-video_size "300x700" test.raw
Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Pedro Terra <pedro@terraco.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When adding an internal scratch buffer to improve buffer handling when
stopping it was also erroneously used when syncing at capture start.
This led to that the first three buffers captured were always dropped
as they were captured in the scratch buffer instead of in a buffer
provided by the user.
Allow the hardware to be given user provided buffers when preparing for
capture in the stopped state. This still allows the driver to sync with
the hardware and always completes the buffers to user-space in the
correct order as no buffers are completed before the sync is complete.
This change improves the driver as buffers are completed and given to
the user three frames earlier than before.
The change also fixes a warning produced by v4l2-compliance,
warn: v4l2-test-buffers.cpp(448): got sequence number 3, expected 0
[hverkuil: fixed some typos in the Subject and the log message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pointer t is being assigned a value that is never read, it is being
updated later on inside the for-loop. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Previously it was possible, but a recent fix for uninitialized
`ret` variable broke this behavior.
v4l2_fh_is_singular_file() check is there just to determine
whether the power needs to be enabled, and it's not a failure
if it returns false.
Fixes: ba9139116bc0 ("media: sun6i-csi: add a missing return code")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some tools like v4l2-compliance let users select a media device based
on the bus_info string which can be quite convenient. Use a unique
string for that.
This also fixes the following v4l2-compliance warning:
warn: v4l2-test-media.cpp(52): empty bus_info
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Even if model and bus_info currently both are 32 bytes large, use
the correct array size for bus_info.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the build errors reported by the kernel test robot by
selecting V4L2_ASYNC:
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove':
ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev'
mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe':
ths8200.c:(.text+0x404): undefined reference to `v4l2_async_register_subdev'
Fixes: ed29f89497006 ("media: i2c: ths8200: support asynchronous probing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Update the media drivers I maintain to use my personal mail address.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'linux-renesas-soc' is the mailing list for renesas SOC driver,
so add it to renesas JPU driver info.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver takes "osd_xres" and "osd_yres" as module parameters and
caps the upper bounds but it doesn't cap the lower bounds. Obviously
the admin is not going to enter negative resolutions but the possibility
makes static analysis more difficult.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use usb_get_dev() to increment the reference count of the usb device
structure in order to avoid releasing the structure while it is still in
use. And use usb_put_dev() to decrement the reference count and thus,
when it will be equal to 0 the structure will be released.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
MLX90640 should ideally be working without a frame skip.
In short, if a frame is skipped, then half of a frame loses correction
information, having no way to retrieve its original compensation.
This patch improves the timing in three ways:
1) Replaced schedule_timeout_interruptible() to usleep_range()
The former "only ensures that it will sleep for at least
schedule_delay (if not interrupted)", as pointed out by mchehab.
As a result, the frame rate could lag behind than the actual capability
of the hardware
(Raspberry Pi would show a few Hz slower than set value)
2) Calculation based on us, not jiffies
Jiffies usually has resolution of 100Hz, and possibly even cruder.
MLX90640 can go up to 64Hz frame rate, which does not make sense to
calculate the interval with aforementioned resolution.
3) Interval calculation based on the last frame's end time
Using the start time of the current frame will probably make tiny bit
of drift every time. This made more sense when I didn't realize 1),
but it still makes sense without adding virtually any complexity,
so this stays in.
Signed-off-by: Seongyong Park <euphoriccatface@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Several trivial code reformatting changes done according to the coding
style guidelines. These changes improves code organisation and readability
and also 4 address many chackpatch error, warning and check complaints.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This adds support for the new noncontiguous DMA API, which
requires allocators to have two execution branches: one
for the current API, and one for the new one.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch lets user-space request a non-coherent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one byte of a 4 byte ->reserved[1] member of struct
v4l2_requestbuffers. The struct, thus, now has reserved 3 bytes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Preparations for future V4L2_MEMORY_FLAG_NON_COHERENT support.
Extend the vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory coherency configuration.
An attempt to allocate a buffer with coherency requirements
that do not match the queue's consistency model will fail.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
By setting or clearing the V4L2_MEMORY_FLAG_NON_COHERENT flag
user-space should be able to hint vb2 that either non-coherent
(if supported) or coherent memory should be used for the buffer
allocation.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This moves cache hints handling from the videobuf2 core down
to the allocator's level, because allocators do the sync/flush
caches eventually and may take better decisions. Besides,
allocators already decide whether cache sync/flush should
be done or can be skipped. This patch moves the scattered
buffer cache sync logic to one common place.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2 is not the perfect place to manage vb2 buffer cache hints.
It works for V4L2 users, but there are backends that use vb2 core
and don't use V4L2. Factor out buffer cache hints initialisation
and call it when we allocate vb2 buffer.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It would be less error prone if the default cache hints value
(we kzalloc() structs, so it's zeroed out by default) would be
to "always sync/flush" caches. Inverse and rename cache hints
flags.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the new DMA API we need an extension of the videobuf2 API.
Previously, videobuf2 core would set the non-coherent DMA bit
in the vb2_queue dma_attr field (if user-space would pass a
corresponding memory hint); the vb2 core then would pass the
vb2_queue dma_attrs to the vb2 allocators. The vb2 allocator
would use the queue's dma_attr and the DMA API would allocate
either coherent or non-coherent memory.
But we cannot do this anymore, since there is no corresponding DMA
attr flag and, hence, there is no way for the allocator to become
aware of what type of allocation user-space has requested. So we
need to pass more context from videobuf2 core to the allocators.
Fix this by changing the call_ptr_memop() macro to pass the
vb2 pointer to the corresponding op callbacks.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vfe->ops->hw_version(vfe) is being called before vfe->base has been
assigned, and before the hardware has been powered up.
Fixes: b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Limit frame size to what userland code expects. This can happen when
cameras, such as Kensington VideoCAM, use fixed sized transfer packets
which includes trailing junk in the final packet.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Video capture has been successfully tested using an OV5640 parallel
sensor on a imx6ull-evk board at a 640x480 resolution and UYVY8_2X8
format.
Remove the two items that are no longer pending.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
imx6ull-evk has a parallel OV5640 sensor.
Provide an example for imx6ull-evk capture to improve the document.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the vivid emulation of cec message transmission does not force
adapters to wait until the cec bus has been signal-free for a certain
number of bit periods before transmitting or re-transmitting a message.
Without enforcing the signal-free time requirements, adapters do not share
the bus very well and some messages are sent too quickly while other
messages are lost. By emulating a signal-free time and forcing adapters
to wait their turn to transmit, the vivid emulation of cec transmission
is much more reliable.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Request API is currently used and specified as part of the
Memory-to-memory Stateless Video Decoder Interface [1].
This can now be considered as non-experimental and stable, given
the decoder API has been used by products since a couple years,
supported by several drivers and userspace frameworks,
[1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a
corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling
path of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes: 3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this representative problem
camss-vfe-4-1.c:333: The result of the left shift is undefined because
the left operand is negative
reg |= (height - 1) << 4;
~~~~~~~~~ ^
The is a false positive. height is set in vfe_get_wm_sizes() which
has a switch statement without a default.
Reviewing the switch, the cases contain redundant assignments.
So simplify to assignments.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After urb was freed, the pointer and counter need to be
cleaned.
Signed-off-by: Nil Yi <teroincn@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Static analysis reports this representative problem
tda1997x.c:1939: warning: 7th function call argument is an uninitialized
value
The 7th argument is buffer[0], which is set in the earlier call to
io_readn(). When io_readn() call to io_read() fails with the first
read, buffer[0] is not set and 0 is returned and stored in len.
The later call to hdmi_infoframe_unpack()'s size parameter is the
static size of buffer, always 40, so a short read is not caught
in hdmi_infoframe_unpacks()'s checking. The variable len should be
used instead.
Zero initialize buffer to 0 so it is in a known start state.
Fixes: 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If of_device_get_match_data() return NULL,
then null pointer dereference occurs in s5p_mfc_init_pm().
The patch adds checking if dev->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CEC pin framework has to wait for the CEC bus to be idle for the
requested Signal Free Time before it can start a transmit.
However, the check for that was off by one, so transmits would start one
bit period (2.4ms) too late.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is
checked in:
if (!dev->plat_dev)
This indicates both dev->plat_dev and pdev can be NULL. If so, the
function dev_err() is called to print error information.
dev_err(&pdev->dev, "No platform data specified\n");
However, &pdev->dev is an illegal address, and it is dereferenced in
dev_err().
To fix this possible null-pointer dereference, replace dev_err() with
mfc_err().
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As partially addressed in commit 65d270acb2d6 ("media: aspeed: clear
garbage interrupts"), the ASpeed video engine sometimes asserts
interrupts that the driver hasn't enabled. In addition to the
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts dealt with in that
patch, COMP_READY has also been observed. Instead of playing
whack-a-mole with each one individually, we can instead just blanket
ignore everything we haven't explicitly enabled.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bounds checking in avc_ca_pmt() is not strict enough. It should
be checking "read_pos + 4" because it's reading 5 bytes. If the
"es_info_length" is non-zero then it reads a 6th byte so there needs to
be an additional check for that.
I also added checks for the "write_pos". I don't think these are
required because "read_pos" and "write_pos" are tied together so
checking one ought to be enough. But they make the code easier to
understand for me. The check on write_pos is:
if (write_pos + 4 >= sizeof(c->operand) - 4) {
The first "+ 4" is because we're writing 5 bytes and the last " - 4"
is to leave space for the CRC.
The other problem is that "length" can be invalid. It comes from
"data_length" in fdtv_ca_pmt().
Cc: stable@vger.kernel.org
Reported-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Macros should not use a trailing semicolon，and it was used
the semicolon after macro cam_dbg called in viacam_vb2_prepare,
so deleted these redundant semicolons.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case vb2ops_venc_start_streaming fails, the error value
is overwritten by the ret value of pm_runtime_put which might
be 0. Fix it.
Fixes: 985c73693fe5a (" media: mtk-vcodec: Separating mtk encoder driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It looks like that memcpy() is a superfluous operation in
parse_token()/parse_mtoken(). Simple these two functions and
use kstrtoint() instead of simple_strtol() to avoid data
overflow.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vidtv_bridge_remove() releases and cleans up everything except for dvb
itself. The patch adds this missed release.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
