Our CI[1] reported these warnings when using Sparse:
$ touch net/mptcp/bpf.c
$ make C=1 net/mptcp/bpf.o
net/mptcp/bpf.c: note: in included file:
include/linux/bpf_verifier.h:348:26: error: dubious one-bit signed bitfield
include/linux/bpf_verifier.h:349:29: error: dubious one-bit signed bitfield
Set them as 'unsigned' to avoid warnings.
[1] https://github.com/multipath-tcp/mptcp_net-next/actions/runs/2643588487
Fixes: 1ade23711971 ("bpf: Inline calls to bpf_loop when callback is known")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220711081200.2081262-1-matthieu.baerts@tessares.net
LLVM compiler optimized out the memcpy in xdp_redirect_map_egress,
which caused the Ethernet source MAC-addr to always be zero
when enabling the devmap egress prog via cmdline --load-egress.
Issue observed with LLVM version 14.0.0
- Shipped with Fedora 36 on target: x86_64-redhat-linux-gnu.
In verbose mode print the source MAC-addr in case xdp_devmap_attached
mode is used.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/165754826292.575614.5636444052787717159.stgit@firesoul
Implement bpf_arch_text_poke() for arm64, so bpf prog or bpf trampoline
can be patched with it.
When the target address is NULL, the original instruction is patched to
a NOP.
When the target address and the source address are within the branch
range, the original instruction is patched to a bl instruction to the
target address directly.
To support attaching bpf trampoline to both regular kernel function and
bpf prog, we follow the ftrace patchsite way for bpf prog. That is, two
instructions are inserted at the beginning of bpf prog, the first one
saves the return address to x9, and the second is a nop which will be
patched to a bl instruction when a bpf trampoline is attached.
However, when a bpf trampoline is attached to bpf prog, the distance
between target address and source address may exceed 128MB, the maximum
branch range, because bpf trampoline and bpf prog are allocated
separately with vmalloc. So long jump should be handled.
When a bpf prog is constructed, a plt pointing to empty trampoline
dummy_tramp is placed at the end:
bpf_prog:
mov x9, lr
nop // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad dummy_tramp // plt target
This is also the state when no trampoline is attached.
When a short-jump bpf trampoline is attached, the patchsite is patched to
a bl instruction to the trampoline directly:
bpf_prog:
mov x9, lr
bl <short-jump bpf trampoline address> // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad dummy_tramp // plt target
When a long-jump bpf trampoline is attached, the plt target is filled with
the trampoline address and the patchsite is patched to a bl instruction to
the plt:
bpf_prog:
mov x9, lr
bl plt // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad <long-jump bpf trampoline address>
dummy_tramp is used to prevent another CPU from jumping to an unknown
location during the patching process, making the patching process easier.
The patching process is as follows:
1. when neither the old address or the new address is a long jump, the
patchsite is replaced with a bl to the new address, or nop if the new
address is NULL;
2. when the old address is not long jump but the new one is, the
branch target address is written to plt first, then the patchsite
is replaced with a bl instruction to the plt;
3. when the old address is long jump but the new one is not, the address
of dummy_tramp is written to plt first, then the patchsite is replaced
with a bl to the new address, or a nop if the new address is NULL;
4. when both the old address and the new address are long jump, the
new address is written to plt and the patchsite is not changed.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-4-xukuohai@huawei.com
Add LDR (literal) instruction to load data from address relative to PC.
This instruction will be used to implement long jump from bpf prog to
bpf trampoline in the follow-up patch.
The instruction encoding:
3 2 2 2 0 0
0 7 6 4 5 0
+-----+-------+---+-----+-------------------------------------+--------+
| 0 x | 0 1 1 | 0 | 0 0 | imm19 | Rt |
+-----+-------+---+-----+-------------------------------------+--------+
for 32-bit, variant x == 0; for 64-bit, x == 1.
branch_imm_common() is used to check the distance between pc and target
address, since it's reused by this patch and LDR (literal) is not a branch
instruction, rename it to label_imm_common().
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-3-xukuohai@huawei.com
Before generating bpf trampoline, x86 calls is_valid_bpf_tramp_flags()
to check the input flags. This check is architecture independent.
So, to be consistent with x86, arm64 should also do this check
before generating bpf trampoline.
However, the BPF_TRAMP_F_XXX flags are not used by user code and the
flags argument is almost constant at compile time, so this run time
check is a bit redundant.
Remove is_valid_bpf_tramp_flags() and add some comments to the usage of
BPF_TRAMP_F_XXX flags, as suggested by Alexei.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-2-xukuohai@huawei.com
In sk_psock_skb_ingress_enqueue function, if the linear area + nr_frags +
frag_list of the SKB has NR_MSG_FRAG_IDS blocks in total, skb_to_sgvec
will return NR_MSG_FRAG_IDS, then msg->sg.end will be set to
NR_MSG_FRAG_IDS, and in addition, (NR_MSG_FRAG_IDS - 1) is set to the last
SG of msg. Recv the msg in sk_msg_recvmsg, when i is (NR_MSG_FRAG_IDS - 1),
the sk_msg_iter_var_next(i) will change i to 0 (not NR_MSG_FRAG_IDS), the
judgment condition "msg_rx->sg.start==msg_rx->sg.end" and
"i != msg_rx->sg.end" can not work.
As a result, the processed msg cannot be deleted from ingress_msg list.
But the length of all the sge of the msg has changed to 0. Then the next
recvmsg syscall will process the msg repeatedly, because the length of sge
is 0, the -EFAULT error is always returned.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220628123616.186950-1-liujian56@huawei.com
If we set XFRM security policy by calling setsockopt with option
IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock'
struct. However tcp_v6_send_response doesn't look up dst_entry with the
actual socket but looks up with tcp control socket. This may cause a
problem that a RST packet is sent without ESP encryption & peer's TCP
socket can't receive it.
This patch will make the function look up dest_entry with actual socket,
if the socket has XFRM policy(sock_policy), so that the TCP response
packet via this function can be encrypted, & aligned on the encrypted
TCP socket.
Tested: We encountered this problem when a TCP socket which is encrypted
in ESP transport mode encryption, receives challenge ACK at SYN_SENT
state. After receiving challenge ACK, TCP needs to send RST to
establish the socket at next SYN try. But the RST was not encrypted &
peer TCP socket still remains on ESTABLISHED state.
So we verified this with test step as below.
[Test step]
1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED).
2. Client tries a new connection on the same TCP ports(src & dst).
3. Server will return challenge ACK instead of SYN,ACK.
4. Client will send RST to server to clear the SOCKET.
5. Client will retransmit SYN to server on the same TCP ports.
[Expected result]
The TCP connection should be established.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sehee Lee <seheele@google.com>
Signed-off-by: Sewook Seo <sewookseo@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-07-09
We've added 94 non-merge commits during the last 19 day(s) which contain
a total of 125 files changed, 5141 insertions(+), 6701 deletions(-).
The main changes are:
1) Add new way for performing BTF type queries to BPF, from Daniel Müller.
2) Add inlining of calls to bpf_loop() helper when its function callback is
statically known, from Eduard Zingerman.
3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz.
4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM
hooks, from Stanislav Fomichev.
5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko.
6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky.
7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP
selftests, from Magnus Karlsson & Maciej Fijalkowski.
8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet.
9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki.
10) Sockmap optimizations around throughput of UDP transmissions which have been
improved by 61%, from Cong Wang.
11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa.
12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend.
13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang.
14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma
macro, from James Hilliard.
15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan.
16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits)
selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n
bpf: Correctly propagate errors up from bpf_core_composites_match
libbpf: Disable SEC pragma macro on GCC
bpf: Check attach_func_proto more carefully in check_return_code
selftests/bpf: Add test involving restrict type qualifier
bpftool: Add support for KIND_RESTRICT to gen min_core_btf command
MAINTAINERS: Add entry for AF_XDP selftests files
selftests, xsk: Rename AF_XDP testing app
bpf, docs: Remove deprecated xsk libbpf APIs description
selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage
libbpf, riscv: Use a0 for RC register
libbpf: Remove unnecessary usdt_rel_ip assignments
selftests/bpf: Fix few more compiler warnings
selftests/bpf: Fix bogus uninitialized variable warning
bpftool: Remove zlib feature test from Makefile
libbpf: Cleanup the legacy uprobe_event on failed add/attach_event()
libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy()
libbpf: Cleanup the legacy kprobe_event on failed add/attach_event()
selftests/bpf: Add type match test against kernel's task_struct
selftests/bpf: Add nested type to type based tests
...
====================
Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there is a MAC address specified in the device tree, then
use it. This is already perfectly legal to specify in accordance
with the generic ethernet-controller.yaml schema.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the firmware does not provide a MAC address to the driver,
fall back to generating a random MAC address.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to kfree(table) if @table has been kmalloced,
ie for non initial network namespace.
Fixes: 849d5aa3a1d8 ("af_unix: Do not call kmemdup() for init_net's sysctl table.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Self test improvements and a header tweak
Patch 1 moves a definition to a header so it can be used in a struct
declaration.
Patch 2 adjusts a time threshold for a selftest that runs much slower on
debug kernels (and even more on slow CI infrastructure), to reduce
spurious failures.
Patches 3 & 4 improve userspace PM test coverage.
Patches 5 & 6 clean up output from a test script and selftest helper
tool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The usage header of pm_nl_ctl command doesn't match with the context. So
this patch adds the missing userspace PM keywords 'ann', 'rem', 'csf',
'dsf', 'events' and 'listen' in it.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There're some 'Terminated' messages in the output of userspace pm tests
script after killing './pm_nl_ctl events' processes:
Created network namespaces ns1, ns2 [OK]
./userspace_pm.sh: line 166: 13735 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13737 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv4 MPTCP Connection ns2 => ns1 [OK]
./userspace_pm.sh: line 166: 13753 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1
./userspace_pm.sh: line 172: 13755 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1
Established IPv6 MPTCP Connection ns2 => ns1 [OK]
ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [OK]
This patch adds a helper kill_wait(), in it using 'wait $pid 2>/dev/null'
commands after 'kill $pid' to avoid printing out these Terminated messages.
Use this helper instead of using 'kill $pid'.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds userspace pm subflow tests support for mptcp_join.sh
script. Add userspace pm create subflow and destroy test cases in
userspace_tests().
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds userspace pm tests support for mptcp_join.sh script. Add
userspace pm add_addr and rm_addr test cases in userspace_tests().
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned test measures the transfer run-time to verify
that the user-space program is able to use the full aggregate B/W.
Even on (virtual) link-speed-bound tests, debug kernel can slow
down the transfer enough to cause sporadic test failures.
Instead of unconditionally raising the maximum allowed run-time,
tweak when the running kernel is a debug one, and use some simple/
rough heuristic to guess such scenarios.
Note: this intentionally avoids looking for /boot/config-<version> as
the latter file is not always available in our reference CI
environments.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move macro MPTCPOPT_HMAC_LEN definition from net/mptcp/protocol.h to
include/net/mptcp.h.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are operating in SGMII inband mode, it implies that there is a
PHY connected, and the ethtool advertisement for autoneg applies to
the PHY, not the SGMII link. When in 1000base-X mode, then this applies
to the 802.3z link and needs to be applied to the PCS.
Fix this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A description is missing for the net.core.high_order_alloc_disable
option in admin-guide/sysctl/net.rst ; add it. The above sysctl option
was introduced by commit ce27ec60648d ("net: add high_order_alloc_disable
sysctl/static key").
Thanks to Eric for running again the benchmark cited in the above
commit, showing this knob is now mostly of historical importance.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220707080245.180525-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with Clang we encounter this warning:
| net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short'
| but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat]
| _leave(" = %d [set %hx]", ret, y);
y is a u32 but the format specifier is `%hx`. Going from unsigned int to
short int results in a loss of data. This is surely not intended
behavior. If it is intended, the warning should be suppressed through
other means.
This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tls: pad strparser, internal header, decrypt_ctx etc.
A grab bag of non-functional refactoring to make the series
which will let us decrypt into a fresh skb smaller.
Patches in this series are not strictly required to get the
decryption into a fresh skb going, they are more in the "things
which had been annoying me for a while" category.
====================
Link: https://lore.kernel.org/r/20220708010314.1451462-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_wait_data() sets the return code as an output parameter
and always returns ctx->recv_pkt on success.
Return the error code directly and let the caller read the skb
from the context. Use positive return code to indicate ctx->recv_pkt
is ready.
While touching the definition of the function rename it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
include/net/tls.h is getting a little long, and is probably hard
for driver authors to navigate. Split out the internals into a
header which will live under net/tls/. While at it move some
static inlines with a single user into the source files, add
a few tls_ prefixes and fix spelling of 'proccess'.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max size of iv + aad + tail is 22B. That's smaller
than a single sg entry (32B). Don't bother with the
memory packing, just create a struct which holds the
max size of those members.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AAD size is either 5 or 13. Really no point complicating
the code for the 8B of difference. This will also let us
turn the chunked up buffer into a sane struct.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_skb_cb lives within skb->cb[]. skb->cb[] straddles
2 cache lines, each containing 24B of data.
The first cache line does not contain much interesting
information for users of strparser, so pad things a little.
Previously strp_msg->full_len would live in the first cache
line and strp_msg->offset in the second.
We need to reorder the 8 byte temp_reg with struct tls_msg
to prevent a 4B hole which would push the struct over 48B.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_NF_CONNTRACK=m, struct bpf_ct_opts and enum member
BPF_F_CURRENT_NETNS are not exposed. This commit allows building the
xdp_synproxy selftest in such cases. Note that nf_conntrack must be
loaded before running the test if it's compiled as a module.
This commit also allows this selftest to be successfully compiled when
CONFIG_NF_CONNTRACK is disabled.
One unused local variable of type struct bpf_ct_opts is also removed.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Reported-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220708130319.1016294-1-maximmi@nvidia.com
This change addresses a comment made earlier [0] about a missing return
of an error when __bpf_core_types_match is invoked from
bpf_core_composites_match, which could have let to us erroneously
ignoring errors.
Regarding the typedef name check pointed out in the same context, it is
not actually an issue, because callers of the function perform a name
check for the root type anyway. To make that more obvious, let's add
comments to the function (similar to what we have for
bpf_core_types_are_compat, which is called in pretty much the same
context).
[0]: https://lore.kernel.org/bpf/165708121449.4919.13204634393477172905.git-patchwork-notify@kernel.org/T/#m55141e8f8cfd2e8d97e65328fa04852870d01af6
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220707211931.3415440-1-deso@posteo.net
Syzkaller reports the following crash:
RIP: 0010:check_return_code kernel/bpf/verifier.c:10575 [inline]
RIP: 0010:do_check kernel/bpf/verifier.c:12346 [inline]
RIP: 0010:do_check_common+0xb3d2/0xd250 kernel/bpf/verifier.c:14610
With the following reproducer:
bpf$PROG_LOAD_XDP(0x5, &(0x7f00000004c0)={0xd, 0x3, &(0x7f0000000000)=ANY=[@ANYBLOB="1800000000000019000000000000000095"], &(0x7f0000000300)='GPL\x00', 0x0, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, 0x2b, 0xffffffffffffffff, 0x8, 0x0, 0x0, 0x10, 0x0}, 0x80)
Because we don't enforce expected_attach_type for XDP programs,
we end up in hitting 'if (prog->expected_attach_type == BPF_LSM_CGROUP'
part in check_return_code and follow up with testing
`prog->aux->attach_func_proto->type`, but `prog->aux->attach_func_proto`
is NULL.
Add explicit prog_type check for the "Note, BPF_LSM_CGROUP that
attach ..." condition. Also, don't skip return code check for
LSM/STRUCT_OPS.
The above actually brings an issue with existing selftest which
tries to return EPERM from void inet_csk_clone. Fix the
test (and move called_socket_clone to make sure it's not
incremented in case of an error) and add a new one to explicitly
verify this condition.
Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor")
Reported-by: syzbot+5cc0730bd4b4d2c5f152@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220708175000.2603078-1-sdf@google.com
napi_build_skb() reuses NAPI skbuff_head cache in order to save some
cycles on freeing/allocating skbuff_heads on every new Rx or completed
Tx.
Use napi_consume_skb() to feed the cache with skbuff_heads of completed
Tx, so it's never empty. The budget parameter is added to indicate NAPI
context, as a value of zero can be passed in the case of netpoll.
Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP allocates 'fast clones' skbs for packets in tx queues.
Currently, __alloc_skb() initializes the companion fclone
field to SKB_FCLONE_CLONE, and leaves other fields untouched.
It makes sense to defer this init much later in skb_clone(),
because all fclone fields are copied and hot in cpu caches
at that time.
This removes one cache line miss in __alloc_skb(), cost seen
on an host with 256 cpus all competing on memory accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation is such that driver first resets the
existing PFC config before applying new pfc configuration.
This creates a problem like once PF or VFs requests PFC config
previous pfc config by other PFVfs is getting reset.
This patch fixes the problem by removing unnecessary resetting
of PFC config. Also configure Pause quanta value to smaller as
current value is too high.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a type based test involving the restrict type qualifier
to the BPF selftests. On the btfgen path, this will verify that bpftool
correctly handles the corresponding RESTRICT BTF kind.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220706212855.1700615-3-deso@posteo.net
Lukas reported that after commit f36600634282 ("libbpf: move xsk.{c,h}
into selftests/bpf") MAINTAINERS file needed an update.
In the meantime, Magnus removed AF_XDP samples in commit cfb5a2dbf141
("bpf, samples: Remove AF_XDP samples"), but selftests part still misses
its entry in MAINTAINERS.
Now that xdpxceiver became xskxceiver, tools/testing/selftests/bpf/*xsk*
will match all of the files related to AF_XDP testing (test_xsk.sh,
xskxceiver, xsk_prereqs.sh, xsk.{c,h}).
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-3-maciej.fijalkowski@intel.com
Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.
Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
Since xsk APIs has been removed from libbpf, let's clean up the
BPF docs simutaneously.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20220708042736.669132-1-pulehui@huawei.com
When building with Clang we encounter the following warnings:
| net/l2tp/l2tp_debugfs.c:187:40: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] seq_printf(m, " nr %hu, ns %hu\n", session->nr,
| session->ns);
-
| net/l2tp/l2tp_debugfs.c:196:32: error: format specifies type 'unsigned
| short' but the argument has type 'int' [-Werror,-Wformat]
| session->l2specific_type, l2tp_get_l2specific_len(session));
-
| net/l2tp/l2tp_debugfs.c:219:6: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] session->nr, session->ns,
Both session->nr and ->nc are of type `u32`. The currently used format
specifier is `%hu` which describes a `u16`. My proposed fix is to listen
to Clang and use the correct format specifier `%u`.
For the warning at line 196, l2tp_get_l2specific_len() returns an int
and should therefore be using the `%d` format specifier.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tx NAPI should use netif_napi_add_tx().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wells Lu <wellslutw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netif_napi_add_tx() does not require the weight argument.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conor Dooley says:
====================
PolarFire SoC macb reset support
The Cadence MACBs on PolarFire SoC (MPFS) have reset capability and are
compatible with the zynqmp's init function. I have removed the zynqmp
specific comments from that function & renamed it to reflect what it
does, since it is no longer zynqmp only.
MPFS's MACB had previously used the generic binding, so I also added
the required specific binding.
For v2, I noticed some low hanging cleanup fruit so there are extra
patches added for that:
moving the init function out of the config structs, aligning the
alignment of the zynqmp & default config structs with the other dozen
or so structs & simplifing the error paths to use dev_err_probe().
Feel free to apply as many or as few of those as you like.
====================
Link: https://lore.kernel.org/r/20220706095129.828253-1-conor.dooley@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
init_reset_optional() is somewhat oddly placed amidst the macb_config
struct definitions. Move it to a more reasonable location alongside
the fu540 init functions.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error handling paths in init_reset_optional() can all be
simplified to return dev_err_probe(). Do so.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
