- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
=FtY6
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
# v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
# 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
# =FtY6
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_gt_mcr.c
# drivers/gpu/drm/xe/xe_tuning.c
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
drm-misc-next for v6.13:
UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.
Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.
Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.
Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
panels.
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
Added colon in kernel-doc comment to fix the warning.
./include/drm/drm_drv.h:372: warning: Incorrect use of kernel-doc format: * @fbdev_probe
./include/drm/drm_drv.h:435: warning: Function parameter or struct member 'fbdev_probe' not described in 'drm_driver'
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003023806.17537-1-prosunofficial@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Resources of swapped objects remains on the TTM_PL_SYSTEM manager's
LRU list, which is bad for the LRU walk efficiency.
Rename the device-wide "pinned" list to "unevictable" and move
also resources of swapped-out objects to that list.
An alternative would be to create an "UNEVICTABLE" priority to
be able to keep the pinned- and swapped objects on their
respective manager's LRU without affecting the LRU walk efficiency.
v2:
- Remove a bogus WARN_ON (Christian König)
- Update ttm_resource_[add|del] bulk move (Christian König)
- Fix TTM KUNIT tests (Intel CI)
v3:
- Check for non-NULL bo->resource in ttm_bo_populate().
v4:
- Don't move to LRU tail during swapout until the resource
is properly swapped or there was a swapout failure.
(Intel Ci)
- Add a newline after checkpatch check.
v5:
- Introduce ttm_resource_is_swapped() to avoid a corner-case where
a newly created resource was considered swapped. (Intel CI)
v6:
- Move an assert.
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-2-thomas.hellstrom@linux.intel.com
drm-misc-next for v6.12:
UAPI Changes:
- Add panthor/DEV_QUERY_TIMESTAMP_INFO query.
Cross-subsystem Changes:
- Updated dt bindings.
- Add documentation explaining default errnos for fences.
- Mark dma-buf heaps creation functions as __init.
Core Changes:
- Split DSC helpers from DP helpers.
- Clang build fixes for drm/mm test.
- Remove simple pipeline support for gem-vram,
no longer any users left after converting bochs.
- Add erno to drm_sched_start to distinguish between GPU and queue
reset.
- Add drm_framebuffer testcases.
- Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n.
- Use read_trylock instead of read_lock in dma_fence_begin_signalling to
quiesce lockdep.
Driver Changes:
- Assorted small fixes and updates for tegra, host1x, imagination,
nouveau, panfrost, panthor, panel/ili9341, mali, exynos,
panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a,
bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050,
panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d.
- Add bridge/TI TDP158.
- Assorted documentation updates.
- Convert bochs from simple drm to gem shmem, and check modes
against available memory.
- Many VC4 fixes, most related to scaling and YUV support.
- Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS.
- Rockchip 4k@60 support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
PTL is an integrated GPU based on the Xe3 architecture.
v2: explicitly turn off display until display patches land.
Bspec: 72574
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008013509.61233-6-matthew.s.atwood@intel.com
Giving the opportunity to userspace to associate a free-form
name with a drm_file struct is helpful for tracking and debugging.
This is similar to the existing DMA_BUF_SET_NAME ioctl.
Access to client_name is protected by a mutex, and the 'clients' debugfs
file has been updated to print it.
Userspace MR to use this ioctl:
https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1428
If the string passed by userspace contains chars that would mess up output
when it's going to be printed (in dmesg, fdinfo, etc), -EINVAL is returned.
A 0-length string is a valid use, and clears the existing name.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003124506.470931-2-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This drm printer wrapper can be used to increase the robustness of
the captured output generated by any other drm_printer to make sure
we didn't lost any intermediate lines of the output by adding line
numbers to each output line. Helpful for capturing some crash data.
v2: Extended short int counters to full int (JohnH)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-8-John.C.Harrison@Intel.com
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of TTM-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-65-tzimmermann@suse.de
The old setup function drm_fbdev_shmem_setup() is unused. Remove it
and its internal callbacks. New drivers should call drm_client_setup()
instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-64-tzimmermann@suse.de
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of SHMEM-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-50-tzimmermann@suse.de
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of DMA-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-6-tzimmermann@suse.de
DRM may support multiple in-kernel clients that run as soon as a DRM
driver has been registered. To select the client(s) in a single place,
introduce drm_client_setup().
Drivers that call the new helper automatically instantiate the kernel's
configured default clients. Only fbdev emulation is currently supported.
Later versions can add support for DRM-based logging, a boot logo or even
a console.
Some drivers handle the color mode for clients internally. Provide the
helper drm_client_setup_with_color_mode() for them.
Using the new interface requires the driver to select
DRM_CLIENT_SELECTION in its Kconfig. For now this only enables the
client-setup helpers if the fbdev client has been configured by the
user. A future patchset will further modularize client support and
rework DRM_CLIENT_SELECTION to select the correct dependencies for
all its clients.
v5:
- add CONFIG_DRM_CLIENT_SELECTION und DRM_CLIENT_SETUP
v4:
- fix docs for drm_client_setup_with_fourcc() (Geert)
v3:
- fix build error
v2:
- add drm_client_setup_with_fourcc() (Laurent)
- push default-format handling into actual clients
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-5-tzimmermann@suse.de
Add an fbdev client that can work with any memory manager. The
client implementation is the same as existing code in fbdev-dma or
fbdev-shmem.
Provide struct drm_driver.fbdev_probe for the new client to allocate
the surface GEM buffer. The new callback replaces fb_probe of struct
drm_fb_helper_funcs, which does the same.
To use the new client, DRM drivers set fbdev_probe in their struct
drm_driver instance and call drm_fbdev_client_setup(). Probing and
creating the fbdev surface buffer is now independent from the other
operations in struct drm_fb_helper. For the pixel format, the fbdev
client either uses a specified format, the value in preferred_depth
or 32-bit RGB.
v2:
- test for struct drm_fb_helper.funcs for NULL (Sui)
- respect struct drm_mode_config.preferred_depth for default format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-4-tzimmermann@suse.de
The color mode as specified on the kernel command line gives the user's
preferred color depth and number of bits per pixel. Move the
color-mode-to-format conversion from fbdev helpers into a 4CC helper,
so that it can be shared among DRM clients.
v2:
- fix grammar in commit message (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-2-tzimmermann@suse.de
Create a function `drm_gem_shmem_create_with_mnt()`, similar to
`drm_gem_shmem_create()`, that has a mountpoint as a argument. This
function will create a shmem GEM object in a given tmpfs mountpoint.
This function will be useful for drivers that have a special mountpoint
with flags enabled.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-7-mcanal@igalia.com
For some applications, such as applications that uses huge pages, we might
want to have a different mountpoint, for which we pass mount flags that
better match our usecase.
Therefore, create a new function `drm_gem_object_init_with_mnt()` that
allow us to define the tmpfs mountpoint where the GEM object will be
created. If this parameter is NULL, then we fallback to `shmem_file_setup()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-5-mcanal@igalia.com
Function drm_sched_entity_push_job() doesn't have a return value,
remove the return value description for it.
Correct several other typo errors.
v2 (Philipp):
- more correction with related comments.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917144732.2758572-1-shuicheng.lin@intel.com
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609
The whole premise of lockless access to a single-producer-single-
consumer queue is that there is just a single producer and single
consumer. That means we can't call drm_sched_can_queue() (which is
about queueing more work to the hw, not to the spsc queue) from
anywhere other than the consumer (wq).
This call in the producer is just an optimization to avoid scheduling
the consuming worker if it cannot yet queue more work to the hw. It
is safe to drop this optimization to avoid the race condition.
Suggested-by: Asahi Lina <lina@asahilina.net>
Fixes: a78422e9dff3 ("drm/sched: implement dynamic job-flow control")
Closes: https://github.com/AsahiLinux/linux/issues/309
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913202301.16772-1-robdclark@gmail.com
Add new PCI id for ARL platform.
v2: Fix typo in PCI id (SaiTeja)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912115906.2730577-1-dnyaneshwar.bhadane@intel.com
Add PVC PCI IDs to the xe_pciids.h header. They're not yet used in the
driver.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6ac1829493a53a3fec889c746648d627a0296892.1725624296.git.jani.nikula@intel.com
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler;
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
support Innolux G070ACE-LH3 plus DT bindings
support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701:
decouple DSI and DRM code
add SPI support
support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop: Support RGB display on Rockchip RK3066; Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset
-----BEGIN PGP SIGNATURE-----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=7jR+
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEGwAKCRCRxhvAZXjc
ojIuAQC433+hBkvjvmQ7H0r5rgZSjUuCTG3bSmdU7RJmPHUHhwEA85v/NGq53f+W
IhandK6t+Cf0JYpFZ3N0bT88hDYVhQQ=
=9zGL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
Once something had been put into descriptor table, the only thing you
can do with it is returning descriptor to userland - you can't withdraw
it on subsequent failure exit, etc. You certainly can't count upon
it staying in the same slot of descriptor table - another thread
could've played with close(2)/dup2(2)/whatnot.
drm_gem_prime_handle_to_fd() creates a dmabuf, allocates a descriptor
and attaches dmabuf's file to it (the last two steps are done
in dma_buf_fd()). That's nice when all you are going to do is
passing a descriptor to userland. If you just need to work with the
resulting object or have something else to be done that might fail,
drm_gem_prime_handle_to_fd() is racy.
The problem is analogous to one with anon_inode_getfd(), and solution
is similar to what anon_inode_getfile() provides.
Add drm_gem_prime_handle_to_dmabuf() - the "set dmabuf up" parts of
drm_gem_prime_handle_to_fd() without the descriptor-related ones.
Instead of inserting into descriptor table and returning the file
descriptor it just returns the struct file.
drm_gem_prime_handle_to_fd() becomes a wrapper for it. Other users
will be introduced in the next commit.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current implementation of drm_sched_start uses a hardcoded
-ECANCELED to dispose of a job when the parent/hw fence is NULL.
This results in drm_sched_job_done being called with -ECANCELED for
each job with a NULL parent in the pending list, making it difficult
to distinguish between recovery methods, whether a queue reset or a
full GPU reset was used.
To improve this, we first try a soft recovery for timeout jobs and
use the error code -ENODATA. If soft recovery fails, we proceed with
a queue reset, where the error code remains -ENODATA for the job.
Finally, for a full GPU reset, we use error codes -ECANCELED or
-ETIME. This patch adds an error code parameter to drm_sched_start,
allowing us to differentiate between queue reset and GPU reset
failures. This enables user mode and test applications to validate
the expected correctness of the requested operation. After a
successful queue reset, the only way to continue normal operation is
to call drm_sched_job_done with the specific error code -ENODATA.
v1: Initial implementation by Jesse utilized amdgpu_device_lock_reset_domain
and amdgpu_device_unlock_reset_domain to allow user mode to track
the queue reset status and distinguish between queue reset and
GPU reset.
v2: Christian suggested using the error codes -ENODATA for queue reset
and -ECANCELED or -ETIME for GPU reset, returned to
amdgpu_cs_wait_ioctl.
v3: To meet the requirements, we introduce a new function
drm_sched_start_ex with an additional parameter to set
dma_fence_set_error, allowing us to handle the specific error
codes appropriately and dispose of bad jobs with the selected
error code depending on whether it was a queue reset or GPU reset.
v4: Alex suggested using a new name, drm_sched_start_with_recovery_error,
which more accurately describes the function's purpose.
Additionally, it was recommended to add documentation details
about the new method.
v5: Fixed declaration of new function drm_sched_start_with_recovery_error.(Alex)
v6 (chk): rebase on upstream changes, cleanup the commit message,
drop the new function again and update all callers,
apply the errno also to scheduler fences with hw fences
v7 (chk): rebased
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-1-christian.koenig@amd.com
i.MX DRM DT bindings allow using either a proper panel / bridge graph to
provide information about connected panels, or just a display-timings DT
node, describing just the timings and the flags. Add helper bridge
driver supporting the latter usecase. It will be used by both LDB and
parallel-display drivers.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-9-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
