This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
-----BEGIN PGP SIGNATURE-----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=9sTC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fCbE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm ARM64 Devicetree fixes for v6.3
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
arm64: dts: qcom: sc8280xp: fix rx frame shapping info
arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
arm64: dts: qcom: sm8550: Use correct CPU compatibles
arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
...
Link: https://lore.kernel.org/r/20230323141642.1085684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The bob supply is used by several pmic regulators and components which
are not (yet fully) described in the devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
The s12b supply is used by several pmic regulators as well as the
wlan/bluetooth radio which are not yet fully described in the
devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
The s10b supply is used by several components that are not (yet)
described in devicetree (e.g. ram, charger, ec) and must not be
disabled.
Mark the regulator as always-on.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
The s11b supply is used by the wlan module (as well as some of the
pmics) which are not yet fully described in the devicetree.
Mark the regulator as always-on for now.
Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
Few fixes addressing issues around validation of device tree SCMI node,
allowing raw SCMI access even on systems which fail to probe the normal
driver stack, duplicate header inclusion, clean up return statement using
literal values instead of variable to simplify and use of devm_bitmap_zalloc
instead of devm_kcalloc to improve semantic.
-----BEGIN PGP SIGNATURE-----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=YVm6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OkOj
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/fixes
Arm SCMI fixes for v6.3
Few fixes addressing issues around validation of device tree SCMI node,
allowing raw SCMI access even on systems which fail to probe the normal
driver stack, duplicate header inclusion, clean up return statement using
literal values instead of variable to simplify and use of devm_bitmap_zalloc
instead of devm_kcalloc to improve semantic.
* tag 'scmi-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use the bitmap API to allocate bitmaps
firmware: arm_scmi: Fix device node validation for mailbox transport
firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path
firmware: arm_scmi: Remove duplicate include header inclusion
firmware: arm_scmi: Return a literal instead of a variable
firmware: arm_scmi: Clean up a return statement in scmi_probe
Link: https://lore.kernel.org/r/20230315193557.1709241-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQRxqUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5fJgf/b9gDwsdBW/u4p7cxo57u5kwxw7b4
YynKjsobP9T/ZQCak9lGPHDQGUkMoWHvHgU9xghjHfcNSX41i7KJgcbluk5YbEtw
gcDvq0lUUT+lJzH2C7HlgwUjp2zWb84DZb4byyHTxcJK6my8RMQ6WtCONVwxrbv4
yJkXjzeXcV1jP2P+isSpG82zpMTkQaDQaV8/fEWPhfm0zXYhTY13tRdA20knaMyS
lEzfq/IG9Ikgh3Ho4WoMIGCz3ZZJqCDjLYFH+i6kh1XWILyUkVvnSbyueRJCIYCT
1dGsM/DKBADWL3frSGS6HbnlCOGdk3EOfGpRsLKZhbpEqqeAbyPHDL3X6A==
=qjnx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1O1H
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc-fixes
i.MX fixes for 6.3:
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
* tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
arm64: dts: freescale: imx8-ss-lsio: Fix flexspi clock order
Link: https://lore.kernel.org/r/20230315132814.GF143566@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
-----BEGIN PGP SIGNATURE-----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=37uO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQUeZoACgkQmmx57+YA
GNn7Sg/+PFetujW8kOwJjViXGI2j4dMba+zK7EncyiO9MamUzUd5C4/CIvALFPJZ
gp5hcFp38SxRPb6AKGdkA7zdVn7nmLZxazbFxe9Hkqv0azBcFrvWcGiVyxZs6zoO
Ukp7/3sB/+ZIqvHYP1QPf/ErQGfm1nXkrbwpHu4NxKO/vxrR7GzGh8fdb0Y3fFfF
H7WltHnwocBQSLO7UhgoPQAPqvLjhpsLgYgG+YLv723zDAIi6dQxdC1xrAHj/5b3
T0zfWzizEfpDw+RBUWDW2qMTc8Z8b8vpqWmmSF0LkhiDA1A0+QztpHcLZJrLUM0T
Xlrw8RKeaLsuR7v0amXu3hwXWiCj2xFMuEpIO7NBpZad9c60yacHbnqoIZJeO2J9
NMZXvUOLWPJ+rsMtRgh6KwCxP6X2fdHwHatKTdwvferSaoR8z2TzFrf7rR+4cF2z
9j38Czoq1X7kAIOjQyIki4xZsQmhqTjGifDcnzbeffL8bbCfSpa/pKuSFcy3smFP
JomfLOsXw+2zm8Hth4GfxZXlX1W7yddh32zPbOjcXIMFaNdnOugeQrcxMmJtwMO8
ghKkpQwYjROfmyAS5HimfK7pSvWKGBR9QwNeiWMZ2jqCeaPdrSBGVhT1RS6jg/+l
UaLvMG30mn6N6upuQcxa7i8ZhDiNemnImYqVI35ea4gmtgNVMnA=
=n0So
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc-fixes
arm64: tegra: Device tree fixes for v6.3-rc1
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
* tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Bump CBB ranges property on Tegra194 and Tegra234
Link: https://lore.kernel.org/r/20230302094213.3874449-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add them to the SoC .dtsi, so that not every board has to specify them.
Fixes: 1225396fefea ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.
This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.
Fixes: 52c47b63412b ("bus: imx-weim: improve error handling upon child probe-failure")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #sound-dai-cells properties to SAI nodes.
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 9e9860069725 ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'macirq' is supposed to be listed first. Also only 'snps,clk-csr' is
listed in the bindings while 'clk_csr' is only supported for legacy
reasons. See commit 83936ea8d8ad2 ("net: stmmac: add a parse for new
property 'snps,clk-csr'")
Fixes: 1f4263ea6a4b ("arm64: dts: imx93: add eqos support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'axi' clock are the bus APB clock, the 'disp_axi' clock are the
pixel data AXI clock. The naming is confusing. Fix the clock order.
Fixes: 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Fixes: 40ba2eda0a7b ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The UFS controller on SM8550 supports cache coherency, hence add the
"dma-coherent" property to mark it as such.
Fixes: 35cf1aaab169 ("arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308054630.7202-1-manivannan.sadhasivam@linaro.org
The cdsp.mbn firmware that's referenced in sa8540p-ride.dts is actually
named cdsp0.mbn in the deliverables from Qualcomm. Let's go ahead and
correct the name to match what's in Qualcomm's deliverable.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307232340.2370476-1-bmasney@redhat.com
The second LPASS pin controller IO address is supposed to be the MCC
range which contains the slew rate registers. The Linux driver then
accesses slew rate register with hard-coded offset (0xa000). However
the DTS contained the address of slew rate register as the second IO
address, thus any reads were effectively pass the memory space and lead
to "Internal error: synchronous external aborts" when applying pin
configuration.
Fixes: 6de7f9c34358 ("arm64: dts: qcom: sm8550: add GPR and LPASS pin controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302154724.856062-1-krzysztof.kozlowski@linaro.org
VA dmics 0, 1, 2 micbias on X13s are connected to WCD MICBIAS1, WCD MICBIAS1
and WCD MICBIAS3 respectively. Reflect this in dt to get dmics working.
Also fix dmics to go via VA Macro instead of TX macro to fix device switching.
Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-5-srinivas.kandagatla@linaro.org
The version of dmic that is on X13s panel supports clock frequency
of range 1 Mhz to 4.8 MHz for normal operation.
So correct the existing node to reflect this.
Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-4-srinivas.kandagatla@linaro.org
Tx macro soundwire clock is for some reason is incorrectly assigned to
va macro, fix this and use tx macro clock instead.
Fixes: 1749a8ae49a3 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-3-srinivas.kandagatla@linaro.org
The WSA2 assigned-clocks were copied from WSA, but the WSA2 uses its
own.
Fixes: 14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123129.232642-1-krzysztof.kozlowski@linaro.org
Use devm_bitmap_zalloc() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/c073b1607ada34d5bde6ce1009179cf15bbf0da3.1657308593.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.
Add more strict checking of SCMI mailbox transport device node descriptors.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.
Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
The previous commit mistakenly introduced sim_ctrl_default as pinctrl,
this is incorrect, the interface for sim card selection varies between
different devices and should not be placed in the dtsi.
This commit selects external SIM card slot for ufi001c as default.
uf896 selects the correct SIM card slot automatically, thus does not need
this pinctrl node.
Fixes: faf69431464b ("arm64: dts: qcom: msm8916-thwc: Add initial device trees")
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_7036BCA256055D05F8C49D86DF7F0E2D1A05@qq.com
Missing vendor name for venus firmware path. Add it.
Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230221123633.25145-1-lujianhua000@gmail.com
Use the correct compatibles for the four kinds of CPU cores used on
SM8550, based on the value of their MIDR_EL1 registers:
CPU7: 0x411fd4e0 - CX3 r1p1
CPU5-6: 0x412fd470 - CA710 r?p?
CPU3-4: 0x411fd4d0 - CA715 r?p?
CPU0-2: 0x411fd461 - CA510 r?p?
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216110803.3945747-2-konrad.dybcio@linaro.org
The default bias pull up value for the tlmm i2c data clk states is
2.2kOhms. Add this value to make sure the driver factors in the i2c pull
up bit when writing the config register.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209074510.4153294-2-abel.vesa@linaro.org
This was omitted when first introducing the node. Fix it.
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109135647.339224-5-konrad.dybcio@linaro.org
For uniquely identifying the vadc channels, label property has to be used.
The initial commit adding vadc support assumed that the driver will use the
unit address along with the node name to identify the channels. But this
assumption is now broken by,
commit 701c875aded8 ("iio: adc: qcom-spmi-adc5: Fix the channel name") that
stripped unit address from channel names. This results in probe failure of
the vadc driver:
[ 8.380370] iio iio:device0: tried to double register : in_temp_pmic-die-temp_input
[ 8.380383] qcom-spmi-adc5 c440000.spmi:pmic@0:adc@3100: Failed to register sysfs interfaces
[ 8.380386] qcom-spmi-adc5: probe of c440000.spmi:pmic@0:adc@3100 failed with error -16
Hence, let's get rid of the assumption about drivers and rely on label
property to uniquely identify the channels.
The labels are derived from the schematics for each PMIC. For internal adc
channels such as die and xo, the PMIC names are used as a prefix.
Fixes: 7c0151347401 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} ADC_TM5 channels")
Fixes: 9d41cd17394a ("arm64: dts: qcom: sc8280xp-x13s: Add PMR735A VADC channel")
Fixes: 3375151a7185 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} VADC channels")
Fixes: 9a6b3042c533 ("arm64: dts: qcom: sc8280xp-x13s: Add PMK8280 VADC channels")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230211052415.14581-1-manivannan.sadhasivam@linaro.org
The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!
Cc: stable@vger.kernel.org # 5.19
Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
When SCMI raw coexistence mode is enabled make the core stack probe
successfully even when the initial base protocol exchanges with the
platform/server failed.
This behaviour enables the system to boot with a broken regular SCMI
stack but with a fully functional and accessible SCMI raw debugfs
interface that can be used to further debug the issue.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230223152330.2707260-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
linux/of.h is included more than once, just remove the duplicate include
header inclusion.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202302101520071730986@zte.com.cn
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In this context "return scmi_dev;" and "return NULL;" are equivalent
but it is more readable to return a literal.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/Y/Yx8pOdf8rNhPVe@kili
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The comments say "enabled" where "disabled" is intended. Also it's
cleaner to return zero explicitly instead of ret.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y86im5M49p3ePGxj@kili
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.
Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The correct clock order is "fspi_en" and "fspi". As they are identical
just reordering the names is sufficient.
Fixes: 6276d66984e9 ("arm64: dts: imx8dxl: add flexspi0 support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough.
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on
return to userspace for performance reasons, but the leaves user space
vulnerable to cross-thread attacks which STIBP prevents. Update the
documentation accordingly.
-----BEGIN PGP SIGNATURE-----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=1RwH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
