cc_sram_mgr_fini() doesn't do anything, so it can just be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When no SRAM can be allocated, cc_sram_alloc() already prints an error
message. Hence there is no need to duplicate this in all callers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the way the hardware works, every double word in the SHA384 and
SHA512 larval hashes must be swapped. Currently this is done at run
time, during driver initialization.
However, this swapping can easily be done at build time. Treating each
double word as two words has the benefit of changing the larval hashes'
types from u64[] to u32[], like for all other hashes, and allows
dropping the casts and size doublings when calling cc_set_sram_desc().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unneeded casts prevent the compiler from performing valuable checks.
This is especially true for function pointers.
Remove these casts, to prevent silently introducing bugs when a
variable's type might be changed in the future.
No change in generated code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If cc_queues_status() indicates that the queue is full,
cc_send_sync_request() should loop and retry.
However, cc_queues_status() returns either 0 (for success), or -ENOSPC
(for queue full), while cc_send_sync_request() checks for real errors by
comparing with -EAGAIN. Hence -ENOSPC is always considered a real
error, and the code never retries the operation.
Fix this by just removing the check, as cc_queues_status() never returns
any other error value than -ENOSPC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reading the debugfs files under /sys/kernel/debug/ccree/ can be done by
the user at any time. On R-Car SoCs, the CCREE device is power-managed
using a moduile clock, and if this clock is not running, bogus register
values may be read.
Fix this by filling in the debugfs_regset32.dev field, so debugfs will
make sure the device is resumed while its registers are being read.
This fixes the bogus values (0x00000260) in the register dumps on R-Car
H3 ES1.0:
-e6601000.crypto/regs:HOST_IRR = 0x00000260
-e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000260
+e6601000.crypto/regs:HOST_IRR = 0x00000038
+e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000038
e6601000.crypto/regs:AXIM_MON_ERR = 0x00000000
e6601000.crypto/regs:DSCRPTR_QUEUE_CONTENT = 0x000002aa
-e6601000.crypto/regs:HOST_IMR = 0x00000260
+e6601000.crypto/regs:HOST_IMR = 0x017ffeff
e6601000.crypto/regs:AXIM_CFG = 0x001f0007
e6601000.crypto/regs:AXIM_CACHE_PARAMS = 0x00000000
-e6601000.crypto/regs:GPR_HOST = 0x00000260
+e6601000.crypto/regs:GPR_HOST = 0x017ffeff
e6601000.crypto/regs:AXIM_MON_COMP = 0x00000000
-e6601000.crypto/version:SIGNATURE = 0x00000260
-e6601000.crypto/version:VERSION = 0x00000260
+e6601000.crypto/version:SIGNATURE = 0xdcc63000
+e6601000.crypto/version:VERSION = 0xaf400001
Note that this behavior is system-dependent, and the issue does not show
up on all R-Car Gen3 SoCs and boards. Even when the device is
suspended, the module clock may be left enabled, if configured by the
firmware for Secure Mode, or when controlled by the Real-Time Core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/ccree/cc_cipher.c: In function 'cc_setup_state_desc':
drivers/crypto/ccree/cc_cipher.c:536:15: warning:
variable 'du_size' set but not used [-Wunused-but-set-variable]
commit 5c83e8ec4d51 ("crypto: ccree - fix FDE descriptor sequence")
involved this unused variable, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the auth tag size from cryptlen before mapping the destination
in out-of-place AEAD decryption thus resolving a crash with
extended testmgr tests.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # v4.19+
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix an error causing no block sizes to be reported during
all AEAD registrations.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OFB and CTR modes block sizes were wrongfully reported as
the underlying block sizes. Fix it to 1 bytes as they
turn the block ciphers into stream ciphers.
Also document why our XTS differes from the generic
implementation.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make sure to only add the size of the auth tag to the source mapping
for encryption if it is an in-place operation. Failing to do this
previously caused us to try and map auth size len bytes from a NULL
mapping and crashing if both the cryptlen and assoclen are zero.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Deal gracefully with a NULL or empty scatterlist which can happen
if both cryptlen and assoclen are zero and we're doing in-place
AEAD encryption.
This fixes a crash when this causes us to try and map a NULL page,
at least with some platforms / DMA mapping configs.
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These inline versions of PM function for the case of CONFIG_PM is
not set are never used. Erase them.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_pm_put_suspend() return value was never checked and is not
useful. Turn it into a void functions.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were using the irq field of the drvdata struct in
an overloaded fahsion - saving the IRQ number during init
and then storing the pending itnerrupt sources during
interrupt in the same field.
This worked because these usage are mutually exclusive but
are confusing. So simplify the code and change the init use
case to use a simple local variable.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PM code was racy, possibly causing the driver to submit
requests to a powered down device. Fix the race and while
at it simplify the PM code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: 1358c13a48c4 ("crypto: ccree - fix resume race condition on init")
Cc: stable@kernel.org # v4.20
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In FDE mode (xts, essiv and bitlocker) the cryptocell hardware requires
that the the XEX key will be loaded after Key1.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cc_do_send_request() cannot fail and always returns
-EINPROGRESS. Turn it into a void function and simplify
code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync() can return 1 as a valid (none error) return
code. Treat it as such.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have several loud error log messages that are already reported
via the normal return code mechanism and produce a lot of noise
when the new testmgr extra test are enabled. Turn these into
debug only messages
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On AEAD decryption authentication failure we are suppose to
zero out the output plaintext buffer. However, we've missed
skipping the optional associated data that may prefix the
ciphertext. This commit fixes this issue.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: e88b27c8eaa8 ("crypto: ccree - use std api sg_zero_buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flag CRYPTO_TFM_RES_BAD_BLOCK_LEN is never checked for, and it's
only set by one driver. And even that single driver's use is wrong
because the driver is setting the flag from ->encrypt() and ->decrypt()
with no locking, which is unsafe because ->encrypt() and ->decrypt() can
be executed by many threads in parallel on the same tfm.
Just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix brown paper bag bug of not releasing backlog list item buffer
when backlog was consumed causing a memory leak when backlog is
used.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix some typos in error message text.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix some typos in code comments.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The define of CC_DEV_SHA_MAX is not needed since we moved
to runtime detection of capabilities. Remove it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ccree driver does not use the ablkcipher interface but contains
a rudimentary reference to it in the naming of an unrelated macro.
Let's rename it to avoid confusion.
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the following warnings:
drivers/crypto/ccree/cc_aead.c:630:5-12: WARNING: Unsigned expression
compared with zero: seq_len > 0
Signed-off-by: Tian Tao <tiantao6@huawei.com>
v2:
change hmac_setkey() return type to unsigned int to fix the warning.
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In XTS encryption/decryption the plaintext byte size
can be >= AES_BLOCK_SIZE. This patch enable the AES-XTS ciphertext
stealing implementation in ccree driver.
Signed-off-by: Uri Shir <uri.shir@arm.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename the algo_init arrays to cc_algo_init so that they do not conflict
with the functions declared in crypto/sha256.h.
This is a preparation patch for folding crypto/sha256.h into crypto/sha.h.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace internal cc_zero_sgl() with kernel API of the same function
sg_zero_buffer().
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check assoclen to solve the extra tests that expect -EINVAL to be
returned when the associated data size is not valid.
Validated assoclen for RFC4543 which expects an assoclen
of 16 or 20, the same as RFC4106.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof
IP Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or
20 bytes.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register a FIPS test failure notifier and use it to notify
TEE side of FIPS test failures on our side prior to panic.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When ccree driver runs it checks the state of the Trusted Execution
Environment CryptoCell driver before proceeding. We did not account
for cases where the TEE side is not ready or not available at all.
Fix it by only considering TEE error state after sync with the TEE
side driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ab8ec9658f5a ("crypto: ccree - add FIPS support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ccree had a mechanism for IV generation which was not compatible
with the Linux seqiv or echainiv iv generator and was never used
in any of the upstream versions so drop all the code implementing it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add check to verify the stated device tree HW configuration
matches the HW.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ccree irq may be shared with other devices, in order to prevent ccree isr
handling while device maybe suspended we added a check to verify that the
device is not suspended.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of driver probe and pm resume we need to check that the cryptocell
hardware reset cycle is completed. during the reset cycle that Cryptocell
provide read only access to the APB interface which allows to verify
through the CC registers that the reset is completed. Until reset
completion we assume that any write/crypto operation is blocked.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We build an explicit little endian value from the IDR register
values. Use a proper le32 type to mark the var as such to
satisfy Sparse.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: dcf6285d18ea1 ("crypto: ccree - add CID and PID support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/ccree/cc_cipher.c: In function cc_setup_key_desc:
drivers/crypto/ccree/cc_cipher.c:645:15: warning: variable du_size set but not used [-Wunused-but-set-variable]
It is never used since introduction in
commit dd8486c75085 ("crypto: ccree - move key load desc. before flow desc.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warning:
drivers/crypto/ccree/cc_driver.c:37:6: warning:
symbol 'cc_sec_disable' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_dbg message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
