mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2024-12-28 16:53:49 +00:00
975e4b273e
To determine the max_timeout value, the below calculation is used. max_timeout = 0x10000000 / clk_rate cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout 8388 However, this is not valid for all the platforms. IPQ SoCs starting from IPQ40xx and recent Snapdragron SoCs also has the bark and bite time field length of 20bits, which can hold max up to 32 seconds if the clk_rate is 32KHz. If the user tries to configure the timeout more than 32s, then the value will be truncated and the actual value will not be reflected in the HW. To avoid this, lets add a variable called max_tick_count in the device data, which defines max counter value of the WDT controller. Using this, max-timeout will be calculated in runtime for various WDT contorllers. With this change, we get the proper max_timeout as below and restricts the user from configuring the timeout higher than this. cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout 32 Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240116-wdt-v2-1-501c7694c3f0@quicinc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
344 lines
7.9 KiB
C
344 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
enum wdt_reg {
|
|
WDT_RST,
|
|
WDT_EN,
|
|
WDT_STS,
|
|
WDT_BARK_TIME,
|
|
WDT_BITE_TIME,
|
|
};
|
|
|
|
#define QCOM_WDT_ENABLE BIT(0)
|
|
|
|
static const u32 reg_offset_data_apcs_tmr[] = {
|
|
[WDT_RST] = 0x38,
|
|
[WDT_EN] = 0x40,
|
|
[WDT_STS] = 0x44,
|
|
[WDT_BARK_TIME] = 0x4C,
|
|
[WDT_BITE_TIME] = 0x5C,
|
|
};
|
|
|
|
static const u32 reg_offset_data_kpss[] = {
|
|
[WDT_RST] = 0x4,
|
|
[WDT_EN] = 0x8,
|
|
[WDT_STS] = 0xC,
|
|
[WDT_BARK_TIME] = 0x10,
|
|
[WDT_BITE_TIME] = 0x14,
|
|
};
|
|
|
|
struct qcom_wdt_match_data {
|
|
const u32 *offset;
|
|
bool pretimeout;
|
|
u32 max_tick_count;
|
|
};
|
|
|
|
struct qcom_wdt {
|
|
struct watchdog_device wdd;
|
|
unsigned long rate;
|
|
void __iomem *base;
|
|
const u32 *layout;
|
|
};
|
|
|
|
static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
|
|
{
|
|
return wdt->base + wdt->layout[reg];
|
|
}
|
|
|
|
static inline
|
|
struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
|
|
{
|
|
return container_of(wdd, struct qcom_wdt, wdd);
|
|
}
|
|
|
|
static irqreturn_t qcom_wdt_isr(int irq, void *arg)
|
|
{
|
|
struct watchdog_device *wdd = arg;
|
|
|
|
watchdog_notify_pretimeout(wdd);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int qcom_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
unsigned int bark = wdd->timeout - wdd->pretimeout;
|
|
|
|
writel(0, wdt_addr(wdt, WDT_EN));
|
|
writel(1, wdt_addr(wdt, WDT_RST));
|
|
writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
|
|
writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
|
|
writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN));
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
writel(0, wdt_addr(wdt, WDT_EN));
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
writel(1, wdt_addr(wdt, WDT_RST));
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
wdd->timeout = timeout;
|
|
return qcom_wdt_start(wdd);
|
|
}
|
|
|
|
static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
wdd->pretimeout = timeout;
|
|
return qcom_wdt_start(wdd);
|
|
}
|
|
|
|
static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
|
|
void *data)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
u32 timeout;
|
|
|
|
/*
|
|
* Trigger watchdog bite:
|
|
* Setup BITE_TIME to be 128ms, and enable WDT.
|
|
*/
|
|
timeout = 128 * wdt->rate / 1000;
|
|
|
|
writel(0, wdt_addr(wdt, WDT_EN));
|
|
writel(1, wdt_addr(wdt, WDT_RST));
|
|
writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
|
|
writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
|
|
writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN));
|
|
|
|
/*
|
|
* Actually make sure the above sequence hits hardware before sleeping.
|
|
*/
|
|
wmb();
|
|
|
|
mdelay(150);
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_is_running(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
return (readl(wdt_addr(wdt, WDT_EN)) & QCOM_WDT_ENABLE);
|
|
}
|
|
|
|
static const struct watchdog_ops qcom_wdt_ops = {
|
|
.start = qcom_wdt_start,
|
|
.stop = qcom_wdt_stop,
|
|
.ping = qcom_wdt_ping,
|
|
.set_timeout = qcom_wdt_set_timeout,
|
|
.set_pretimeout = qcom_wdt_set_pretimeout,
|
|
.restart = qcom_wdt_restart,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct watchdog_info qcom_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING
|
|
| WDIOF_MAGICCLOSE
|
|
| WDIOF_SETTIMEOUT
|
|
| WDIOF_CARDRESET,
|
|
.identity = KBUILD_MODNAME,
|
|
};
|
|
|
|
static const struct watchdog_info qcom_wdt_pt_info = {
|
|
.options = WDIOF_KEEPALIVEPING
|
|
| WDIOF_MAGICCLOSE
|
|
| WDIOF_SETTIMEOUT
|
|
| WDIOF_PRETIMEOUT
|
|
| WDIOF_CARDRESET,
|
|
.identity = KBUILD_MODNAME,
|
|
};
|
|
|
|
static const struct qcom_wdt_match_data match_data_apcs_tmr = {
|
|
.offset = reg_offset_data_apcs_tmr,
|
|
.pretimeout = false,
|
|
.max_tick_count = 0x10000000U,
|
|
};
|
|
|
|
static const struct qcom_wdt_match_data match_data_kpss = {
|
|
.offset = reg_offset_data_kpss,
|
|
.pretimeout = true,
|
|
.max_tick_count = 0xFFFFFU,
|
|
};
|
|
|
|
static int qcom_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct qcom_wdt *wdt;
|
|
struct resource *res;
|
|
struct device_node *np = dev->of_node;
|
|
const struct qcom_wdt_match_data *data;
|
|
u32 percpu_offset;
|
|
int irq, ret;
|
|
struct clk *clk;
|
|
|
|
data = of_device_get_match_data(dev);
|
|
if (!data) {
|
|
dev_err(dev, "Unsupported QCOM WDT module\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENOMEM;
|
|
|
|
/* We use CPU0's DGT for the watchdog */
|
|
if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
|
|
percpu_offset = 0;
|
|
|
|
res->start += percpu_offset;
|
|
res->end += percpu_offset;
|
|
|
|
wdt->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(wdt->base))
|
|
return PTR_ERR(wdt->base);
|
|
|
|
clk = devm_clk_get_enabled(dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to get input clock\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
/*
|
|
* We use the clock rate to calculate the max timeout, so ensure it's
|
|
* not zero to avoid a divide-by-zero exception.
|
|
*
|
|
* WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
|
|
* that it would bite before a second elapses it's usefulness is
|
|
* limited. Bail if this is the case.
|
|
*/
|
|
wdt->rate = clk_get_rate(clk);
|
|
if (wdt->rate == 0 ||
|
|
wdt->rate > data->max_tick_count) {
|
|
dev_err(dev, "invalid clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check if there is pretimeout support */
|
|
irq = platform_get_irq_optional(pdev, 0);
|
|
if (data->pretimeout && irq > 0) {
|
|
ret = devm_request_irq(dev, irq, qcom_wdt_isr, 0,
|
|
"wdt_bark", &wdt->wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
wdt->wdd.info = &qcom_wdt_pt_info;
|
|
wdt->wdd.pretimeout = 1;
|
|
} else {
|
|
if (irq == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
wdt->wdd.info = &qcom_wdt_info;
|
|
}
|
|
|
|
wdt->wdd.ops = &qcom_wdt_ops;
|
|
wdt->wdd.min_timeout = 1;
|
|
wdt->wdd.max_timeout = data->max_tick_count / wdt->rate;
|
|
wdt->wdd.parent = dev;
|
|
wdt->layout = data->offset;
|
|
|
|
if (readl(wdt_addr(wdt, WDT_STS)) & 1)
|
|
wdt->wdd.bootstatus = WDIOF_CARDRESET;
|
|
|
|
/*
|
|
* If 'timeout-sec' unspecified in devicetree, assume a 30 second
|
|
* default, unless the max timeout is less than 30 seconds, then use
|
|
* the max instead.
|
|
*/
|
|
wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
|
|
watchdog_init_timeout(&wdt->wdd, 0, dev);
|
|
|
|
/*
|
|
* If WDT is already running, call WDT start which
|
|
* will stop the WDT, set timeouts as bootloader
|
|
* might use different ones and set running bit
|
|
* to inform the WDT subsystem to ping the WDT
|
|
*/
|
|
if (qcom_wdt_is_running(&wdt->wdd)) {
|
|
qcom_wdt_start(&wdt->wdd);
|
|
set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
|
|
}
|
|
|
|
ret = devm_watchdog_register_device(dev, &wdt->wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused qcom_wdt_suspend(struct device *dev)
|
|
{
|
|
struct qcom_wdt *wdt = dev_get_drvdata(dev);
|
|
|
|
if (watchdog_active(&wdt->wdd))
|
|
qcom_wdt_stop(&wdt->wdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused qcom_wdt_resume(struct device *dev)
|
|
{
|
|
struct qcom_wdt *wdt = dev_get_drvdata(dev);
|
|
|
|
if (watchdog_active(&wdt->wdd))
|
|
qcom_wdt_start(&wdt->wdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops qcom_wdt_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(qcom_wdt_suspend, qcom_wdt_resume)
|
|
};
|
|
|
|
static const struct of_device_id qcom_wdt_of_table[] = {
|
|
{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
|
|
{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
|
|
{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
|
|
|
|
static struct platform_driver qcom_watchdog_driver = {
|
|
.probe = qcom_wdt_probe,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = qcom_wdt_of_table,
|
|
.pm = &qcom_wdt_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(qcom_watchdog_driver);
|
|
|
|
MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
|
|
MODULE_LICENSE("GPL v2");
|