mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-19 03:31:25 +00:00
9f2d3eae88
The UCAN driver supports the microcontroller-based USB/CAN adapters from Theobroma Systems. There are two form-factors that run essentially the same firmware: * Seal: standalone USB stick ( https://www.theobroma-systems.com/seal ) * Mule: integrated on the PCB of various System-on-Modules from Theobroma Systems like the A31-µQ7 and the RK3399-Q7 ( https://www.theobroma-systems.com/rk3399-q7 ) The USB wire protocol has been designed to be as generic and hardware-indendent as possible in the hope of being useful for implementation on other microcontrollers. Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
115 lines
3.7 KiB
Plaintext
115 lines
3.7 KiB
Plaintext
menu "CAN USB interfaces"
|
|
depends on USB
|
|
|
|
config CAN_8DEV_USB
|
|
tristate "8 devices USB2CAN interface"
|
|
---help---
|
|
This driver supports the USB2CAN interface
|
|
from 8 devices (http://www.8devices.com).
|
|
|
|
config CAN_EMS_USB
|
|
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
|
|
---help---
|
|
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
|
|
from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
|
|
|
|
config CAN_ESD_USB2
|
|
tristate "ESD USB/2 CAN/USB interface"
|
|
---help---
|
|
This driver supports the CAN-USB/2 interface
|
|
from esd electronic system design gmbh (http://www.esd.eu).
|
|
|
|
config CAN_GS_USB
|
|
tristate "Geschwister Schneider UG interfaces"
|
|
---help---
|
|
This driver supports the Geschwister Schneider and bytewerk.org
|
|
candleLight USB CAN interfaces USB/CAN devices
|
|
If unsure choose N,
|
|
choose Y for built in support,
|
|
M to compile as module (module will be named: gs_usb).
|
|
|
|
config CAN_KVASER_USB
|
|
tristate "Kvaser CAN/USB interface"
|
|
---help---
|
|
This driver adds support for Kvaser CAN/USB devices like Kvaser
|
|
Leaf Light and Kvaser USBcan II.
|
|
|
|
The driver provides support for the following devices:
|
|
- Kvaser Leaf Light
|
|
- Kvaser Leaf Professional HS
|
|
- Kvaser Leaf SemiPro HS
|
|
- Kvaser Leaf Professional LS
|
|
- Kvaser Leaf Professional SWC
|
|
- Kvaser Leaf Professional LIN
|
|
- Kvaser Leaf SemiPro LS
|
|
- Kvaser Leaf SemiPro SWC
|
|
- Kvaser Memorator II HS/HS
|
|
- Kvaser USBcan Professional HS/HS
|
|
- Kvaser Leaf Light GI
|
|
- Kvaser Leaf Professional HS (OBD-II connector)
|
|
- Kvaser Memorator Professional HS/LS
|
|
- Kvaser Leaf Light "China"
|
|
- Kvaser BlackBird SemiPro
|
|
- Kvaser USBcan R
|
|
- Kvaser Leaf Light v2
|
|
- Kvaser Mini PCI Express HS
|
|
- Kvaser Mini PCI Express 2xHS
|
|
- Kvaser USBcan Light 2xHS
|
|
- Kvaser USBcan II HS/HS
|
|
- Kvaser USBcan II HS/LS
|
|
- Kvaser USBcan Rugged ("USBcan Rev B")
|
|
- Kvaser Memorator HS/HS
|
|
- Kvaser Memorator HS/LS
|
|
- Scania VCI2 (if you have the Kvaser logo on top)
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called kvaser_usb.
|
|
|
|
config CAN_MCBA_USB
|
|
tristate "Microchip CAN BUS Analyzer interface"
|
|
---help---
|
|
This driver supports the CAN BUS Analyzer interface
|
|
from Microchip (http://www.microchip.com/development-tools/).
|
|
|
|
config CAN_PEAK_USB
|
|
tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
|
|
---help---
|
|
This driver supports the PEAK-System Technik USB adapters that enable
|
|
access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
|
|
standards, that is:
|
|
|
|
PCAN-USB single CAN 2.0b channel USB adapter
|
|
PCAN-USB Pro dual CAN 2.0b channels USB adapter
|
|
PCAN-USB FD single CAN-FD channel USB adapter
|
|
PCAN-USB Pro FD dual CAN-FD channels USB adapter
|
|
PCAN-Chip USB CAN-FD to USB stamp module
|
|
PCAN-USB X6 6 CAN-FD channels USB adapter
|
|
|
|
(see also http://www.peak-system.com).
|
|
|
|
config CAN_MCBA_USB
|
|
tristate "Microchip CAN BUS Analyzer interface"
|
|
---help---
|
|
This driver supports the CAN BUS Analyzer interface
|
|
from Microchip (http://www.microchip.com/development-tools/).
|
|
|
|
config CAN_UCAN
|
|
tristate "Theobroma Systems UCAN interface"
|
|
---help---
|
|
This driver supports the Theobroma Systems
|
|
UCAN USB-CAN interface.
|
|
|
|
The UCAN driver supports the microcontroller-based USB/CAN
|
|
adapters from Theobroma Systems. There are two form-factors
|
|
that run essentially the same firmware:
|
|
|
|
* Seal: standalone USB stick
|
|
https://www.theobroma-systems.com/seal)
|
|
* Mule: integrated on the PCB of various System-on-Modules
|
|
from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
|
|
(https://www.theobroma-systems.com/rk3399-q7)
|
|
|
|
endmenu
|