Anson Huang 848db4a0a1 ARM: imx: AHB rate must be set to 132MHz on i.mx6sl ...

The reset value of AHB divider is 3, so current AHB rate
is 99MHz which is not correct for kernel, need to ensure
AHB rate is 132MHz in clk driver, as ipg is sourcing from
AHB, and it should be 66MHz by default.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

2014-03-05 10:35:00 +08:00

..

devices

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

3ds_debugboard.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

3ds_debugboard.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

anatop.c

ARM: imx: use imx_init_revision_from_anatop() on imx6sl

2013-10-21 09:13:13 +08:00

avic.c

ARM: imx: drop support for irq priorisation

2013-12-09 13:18:25 +08:00

board-mx31lilly.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

board-mx31lite.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

board-mx31moboard.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

board-pcm038.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

clk-busy.c

ARM: arm-soc non-critical fixes for 3.10

2013-05-02 08:56:55 -07:00

clk-fixup-div.c

ARM: imx: add common clock support for fixup div

2013-08-16 13:11:24 +08:00

clk-fixup-mux.c

ARM: imx: initialize clk_init_data.flags for clk-fixup-mux

2013-09-17 10:04:23 +08:00

clk-gate2.c

ARM: imx: improve status check of clock gate

2013-12-31 09:36:46 +08:00

clk-imx1.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

clk-imx6q.c

ARM: imx6: Initialize low-power mode early again

2014-02-10 10:37:32 -08:00

clk-imx6sl.c

ARM: imx: AHB rate must be set to 132MHz on i.mx6sl

2014-03-05 10:35:00 +08:00

clk-imx21.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

clk-imx25.c

ARM: i.MX25: clk: parent per5_clk to AHB clock

2013-02-05 10:54:35 +01:00

clk-imx27.c

ARM: i.MX: change dev_id to cpu0 while registering cpu clock

2013-09-19 03:53:44 +02:00

clk-imx31.c

Linux 3.8-rc6

2013-02-04 22:56:41 -08:00

clk-imx35.c

ARM i.MX35: Add devicetree support.

2013-12-31 09:36:40 +08:00

clk-imx51-imx53.c

ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition

2013-12-31 09:36:31 +08:00

clk-pfd.c

ARM: imx: add necessary interface for pfd

2013-12-31 09:36:45 +08:00

clk-pllv1.c

ARM: imx: pllv1: Fix PLL calculation for i.MX27

2013-12-31 09:36:29 +08:00

clk-pllv2.c

ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops

2013-04-01 16:17:50 +08:00

clk-pllv3.c

ARM: imx: set up pllv3 POWER and BYPASS sequentially

2013-11-11 22:58:45 +08:00

clk-vf610.c

ARM: imx: Add DMAMUX clock for Vybrid vf610 SoC

2013-12-09 13:18:31 +08:00

clk.c

ARM: imx6: change some clocks to fixup clocks

2013-08-16 13:11:25 +08:00

clk.h

The common clk framework changes for 3.12 are dominated by clock driver

2013-09-09 15:49:04 -07:00

common.h

ARM: imx: Use INT_MEM_CLK_LPM as the bit name

2014-03-05 10:34:59 +08:00

cpu-imx5.c

ARM: mach-imx: cpu-imx5: Include "common.h"

2013-04-01 16:17:49 +08:00

cpu-imx25.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

cpu-imx27.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

cpu-imx31.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

cpu-imx35.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

cpu.c

ARM: imx: Include linux/err.h

2013-10-21 09:15:12 +08:00

cpuidle-imx5.c

ARM: imx: cpuidle: use init/exit common routine

2013-04-23 13:45:23 +02:00

cpuidle-imx6q.c

ARM: imx: Use INT_MEM_CLK_LPM as the bit name

2014-03-05 10:34:59 +08:00

cpuidle.h

ARM: imx: cpuidle: use init/exit common routine

2013-04-23 13:45:23 +02:00

crm-regs-imx5.h

ARM i.MX53: Fix PLL4 base address

2012-06-04 15:23:57 +02:00

crmregs-imx3.h

ARM i.MX3: Make ccm base address a variable

2012-04-25 17:03:45 +02:00

devices-imx1.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx21.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx25.h

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

devices-imx27.h

ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

2012-11-16 16:21:48 +01:00

devices-imx31.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

devices-imx35.h

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

devices-imx51.h

ARM: imx: move platform device code into mach-imx

2012-10-15 09:18:15 +08:00

ehci-imx5.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

ehci-imx25.c

Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

2012-11-30 09:27:57 -08:00

ehci-imx27.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

ehci-imx31.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

ehci-imx35.c

Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

2012-11-30 09:27:57 -08:00

epit.c

ARM: imx: remove IRQF_DISABLED

2013-10-21 09:11:05 +08:00

eukrea_mbimx27-baseboard.c

ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro

2013-04-03 16:50:54 +08:00

eukrea_mbimxsd25-baseboard.c

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

eukrea_mbimxsd35-baseboard.c

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

eukrea_mbimxsd51-baseboard.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

eukrea-baseboards.h

ARM: imx: include board headers in the same folder

2012-10-15 09:18:14 +08:00

gpc.c

ARM: imx: ensure dsm_request signal is not asserted when setting LPM

2013-10-21 09:39:26 +08:00

hardware.h

ARM: imx: include <asm/io.h> in hardware.h

2013-06-17 15:45:10 +08:00

headsmp.S

ARM: imx: replicate the diagnostic register of boot cpu into secondary cores

2013-05-12 21:39:18 +08:00

hotplug.c

ARM: imx: do not return from imx_cpu_die() call

2013-10-21 09:37:31 +08:00

iim.h

ARM: imx: include iim.h rather than mach/iim.h

2012-10-15 10:03:10 +08:00

imx25-dt.c

ARM: imx: create mxc_arch_reset_init_dt() for DT boot

2013-06-17 15:45:10 +08:00

imx27-dt.c

ARM: imx: create mxc_arch_reset_init_dt() for DT boot

2013-06-17 15:45:10 +08:00

imx31-dt.c

ARM: imx: use __initconst for const init definition

2013-12-31 09:36:33 +08:00

imx35-dt.c

ARM i.MX35: Add devicetree support.

2013-12-31 09:36:40 +08:00

imx51-dt.c

ARM: imx: use __initconst for const init definition

2013-12-31 09:36:33 +08:00

iomux-imx31.c

ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map

2013-04-01 16:17:48 +08:00

iomux-mx1.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx2x.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx3.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx21.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx25.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx27.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx35.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-mx51.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-v1.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

iomux-v1.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

iomux-v3.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

iomux-v3.h

ARM: imx: move iomux drivers and headers into mach-imx

2012-10-15 09:18:14 +08:00

irq-common.c

ARM: imx: irq-common: Include header to avoid sparse warning

2013-06-17 15:45:14 +08:00

irq-common.h

ARM: imx: drop support for irq priorisation

2013-12-09 13:18:25 +08:00

Kconfig

ARM: Select V6K instead of V6 by default for multi-platform

2014-02-19 16:46:32 -06:00

mach-apf9328.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-armadillo5x0.c

ARM: imx: remove IRQF_DISABLED

2013-10-21 09:11:05 +08:00

mach-bug.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-cpuimx27.c

ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro

2013-04-03 16:50:54 +08:00

mach-cpuimx35.c

Input: tsc2007 - add device tree support.

2013-11-25 18:27:53 -08:00

mach-cpuimx51sd.c

Input: tsc2007 - add device tree support.

2013-11-25 18:27:53 -08:00

mach-eukrea_cpuimx25.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-imx6q.c

Merge branch 'cubox-i-init' into for-linus

2014-01-28 21:38:58 +00:00

mach-imx6sl.c

ARM: imx: Add cpu frequency scaling support

2013-12-31 09:36:41 +08:00

mach-imx27_visstrim_m10.c

gpio: (gpio-pca953x) move header to linux/platform_data/

2013-08-29 12:33:52 -07:00

mach-imx27ipcam.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-imx27lite.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-imx50.c

ARM: imx: use __initconst for const init definition

2013-12-31 09:36:33 +08:00

mach-imx53.c

ARM: imx: use __initconst for const init definition

2013-12-31 09:36:33 +08:00

mach-kzm_arm11_01.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx1ads.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx21ads.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx25_3ds.c

ARM: imx: prepare for removal of flexcan_platform_data

2013-06-27 15:15:08 +02:00

mach-mx27_3ds.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx27ads.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx31_3ds.c

ARM: imx: remove IRQF_DISABLED

2013-10-21 09:11:05 +08:00

mach-mx31ads.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx31lilly.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx31lite.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx31moboard.c

leds: leds-mc13783: Remove duplicate field in platform data

2014-01-27 17:28:49 -08:00

mach-mx35_3ds.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-mx51_babbage.c

ARM: imx: Remove cpufreq driver

2013-04-01 16:17:34 +08:00

mach-mxt_td60.c

gpio: (gpio-pca953x) move header to linux/platform_data/

2013-08-29 12:33:52 -07:00

mach-pca100.c

treewide: Fix typos in printk

2013-12-19 15:10:49 +01:00

mach-pcm037_eet.c

ARM: imx: include common.h rather than mach/common.h

2012-10-15 10:03:10 +08:00

mach-pcm037.c

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2013-11-18 15:50:07 -08:00

mach-pcm038.c

misc: (at24) move header to linux/platform_data/

2013-09-30 06:02:34 +02:00

mach-pcm043.c

misc: (at24) move header to linux/platform_data/

2013-09-30 06:02:34 +02:00

mach-qong.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-scb9328.c

ARM: delete struct sys_timer

2012-12-24 09:36:38 -07:00

mach-vf610.c

ARM: imx: use __initconst for const init definition

2013-12-31 09:36:33 +08:00

mach-vpr200.c

misc: (at24) move header to linux/platform_data/

2013-09-30 06:02:34 +02:00

Makefile

ARM: imx6: build pm-imx6q.c independently of CONFIG_PM

2014-02-18 16:03:43 -08:00

mm-imx1.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mm-imx3.c

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

2013-07-03 09:46:29 -07:00

mm-imx5.c

ARM: imx: remove mxc_iomux_v3_init() call from imx53_init_early()

2013-12-09 13:18:24 +08:00

mm-imx21.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mm-imx25.c

ARM: i.MX: remove sdma script address arrays from platform data

2013-08-26 20:47:16 +05:30

mm-imx27.c

ARM: imx: move clk_prepare() out from mxc_restart()

2013-06-17 15:45:10 +08:00

mmdc.c

ARM: drivers: remove __dev* attributes.

2013-01-03 15:57:04 -08:00

mx1-camera-fiq-ksym.c

ARM: imx: move platform_data definitions

2012-09-14 11:17:21 +02:00

mx1-camera-fiq.S

ARM: imx: move mx1 support to mach-imx

2010-06-30 08:59:44 +02:00

mx1.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx2x.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx3x.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx21.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx25.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx27.h

ARM: i.MX27: Typo fix

2013-07-15 08:28:07 +08:00

mx31.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31lilly-db.c

ARM: imx: remove IRQF_DISABLED

2013-10-21 09:11:05 +08:00

mx31lite-db.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31moboard-devboard.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31moboard-marxbot.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx31moboard-smartbot.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx35.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx51.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mx53.h

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

mxc.h

ARM: imx: enable suspend for imx6sl

2013-10-21 09:39:27 +08:00

pcm037.h

ARM: imx: use machine specific hook for late init

2012-05-08 20:36:16 +08:00

pcm970-baseboard.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

platsmp.c

ARM: clean up cache handling in platform code

2013-12-11 16:24:34 -08:00

pm-imx3.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

pm-imx5.c

ARM: mx53: Allow suspend/resume

2013-08-22 23:20:45 +08:00

pm-imx6q.c

ARM: imx: Use INT_MEM_CLK_LPM as the bit name

2014-03-05 10:34:59 +08:00

pm-imx27.c

ARM: imx: include hardware.h rather than mach/hardware.h

2012-10-15 10:05:43 +08:00

src.c

ARM: imx: remove imx_src_prepare_restart() call

2013-11-11 22:58:43 +08:00

ssi-fiq-ksym.c

ARM: imx: merge plat-mxc into mach-imx

2012-10-15 10:02:19 +08:00

ssi-fiq.S

ARM: imx: merge plat-mxc into mach-imx

2012-10-15 10:02:19 +08:00

system.c

ARM: imx: improve mxc_restart() on the SRC bit writes

2013-11-11 22:58:43 +08:00

time.c

ARM: imx: Switch to sched_clock_register()

2013-11-21 15:40:59 -08:00

tzic.c

ARM: mach-imx: tzic: Staticize *tzic_base

2013-04-01 16:17:51 +08:00

ulpi.h

ARM: imx: Remove mxc specific ulpi access ops

2013-06-17 15:45:16 +08:00