Bartlomiej Zolnierkiewicz 8ac2b42a45 ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag ...

* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base().

* Factor out code for forcing host out of "simplex" mode from
  ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper.

* Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229),
  amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and
  serverworks (for CSB5) host drivers.

* Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag
  instead of checking dev->device (BTW the code was buggy because it didn't
  check for dev->vendor, luckily none of these PCI Device IDs was used by
  some other vendor for PCI IDE controller).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2008-02-01 23:09:30 +01:00

..

arm

rapide: remove write-only hwif->hwif_data

2008-01-26 20:13:08 +01:00

cris

ide: make remaining built-in only IDE host drivers modular (take 2)

2008-01-26 20:13:07 +01:00

h8300

ide: make remaining built-in only IDE host drivers modular (take 2)

2008-01-26 20:13:07 +01:00

legacy

Atari Falcon IDE: Add missing hwif variable

2008-02-01 23:09:15 +01:00

mips

au1xxx-ide: use ide_init_port_hw()

2008-01-26 20:13:08 +01:00

pci

ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag

2008-02-01 23:09:30 +01:00

ppc

ide/ppc/pmac.c section fixes

2008-02-01 23:09:16 +01:00

ide-acpi.c

ide: set IDE_TFLAG_IN_* flags before queuing/executing command

2008-01-26 20:13:10 +01:00

ide-cd_ioctl.c

ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c

2008-02-01 23:09:29 +01:00

ide-cd_verbose.c

ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c

2008-02-01 23:09:23 +01:00

ide-cd.c

ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c

2008-02-01 23:09:29 +01:00

ide-cd.h

ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c

2008-02-01 23:09:29 +01:00

ide-disk.c

ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE

2008-01-26 20:13:12 +01:00

ide-dma.c

ide: ide_setup_dma() assumes 8 ports

2008-02-01 23:09:30 +01:00

ide-floppy.c

ide-{floppy,tape}: remove debug code for dumping identify data

2008-02-01 23:09:29 +01:00

ide-generic.c

ide: remove ideprobe_init()

2008-01-26 20:13:05 +01:00

ide-io.c

blk_end_request: changing ide normal caller (take 4)

2008-01-28 10:37:02 +01:00

ide-iops.c

ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests

2008-01-26 20:13:13 +01:00

ide-lib.c

ide: remove REQ_TYPE_ATA_CMD

2008-01-26 20:13:13 +01:00

ide-pnp.c

ide: make remaining built-in only IDE host drivers modular (take 2)

2008-01-26 20:13:07 +01:00

ide-probe.c

ide: add ide_dump_identify() debug helper

2008-02-01 23:09:28 +01:00

ide-proc.c

ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests

2008-01-26 20:13:12 +01:00

ide-scan-pci.c

ide: small ide-scan-pci.c cleanup

2008-02-01 23:09:16 +01:00

ide-tape.c

ide-{floppy,tape}: remove debug code for dumping identify data

2008-02-01 23:09:29 +01:00

ide-taskfile.c

ide: make wait_drive_not_busy() static again

2008-02-01 23:09:16 +01:00

ide-timing.h

ide: remove ide_find_best_pio_mode()

2007-07-20 01:11:58 +02:00

ide.c

ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE

2008-01-26 20:13:12 +01:00

Kconfig

ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c

2008-02-01 23:09:23 +01:00

Makefile

ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.c

2008-02-01 23:09:25 +01:00

setup-pci.c

ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag

2008-02-01 23:09:30 +01:00