linux/Documentation
Vincent Pelletier 966fbe193f libata: Add atapi_dmadir force flag
Some device require DMADIR to be enabled, but are not detected as such
by atapi_id_dmadir.  One such example is "Asus Serillel 2"
SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR,
even if the bridged device does not.

As atapi_dmadir module parameter can cause problems with some devices
(as per Tejun Heo's memory), enabling it globally may not be possible
depending on the hardware.

This patch adds atapi_dmadir in the form of a "force" horkage value,
allowing global, per-bus and per-device control.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-22 08:34:34 +09:00
..
2011-09-27 18:08:04 +02:00
2010-02-24 13:51:32 +01:00
2012-04-03 13:09:18 +02:00
2012-10-08 13:50:12 +10:30
2013-05-03 09:10:23 -07:00
2011-09-27 18:08:04 +02:00
2012-12-14 08:48:59 +01:00
2013-04-02 09:39:55 -07:00
2013-03-02 20:09:50 +00:00
2011-03-31 11:26:23 -03:00
2013-01-10 01:27:46 +01:00
2011-11-02 16:07:02 -07:00
2013-04-15 19:45:16 +02:00
2013-04-27 16:41:43 -07:00
2010-04-08 11:34:34 +02:00
2013-04-08 13:33:48 -07:00
2011-03-31 11:26:23 -03:00
2012-07-29 21:11:05 -03:00
2013-04-16 18:47:19 +09:00
2012-12-10 15:54:27 +01:00
2012-12-05 23:52:10 +00:00
2011-03-31 11:26:23 -03:00
2011-09-27 18:08:04 +02:00
2013-02-19 08:42:37 +01:00
2013-04-24 11:42:42 +10:00
2012-02-28 16:05:06 +01:00
2011-09-27 18:08:04 +02:00
2011-03-31 11:26:23 -03:00
2010-03-16 11:47:56 +01:00
2012-01-02 13:04:55 +01:00