Thierry Reding 368b62f2fd pinctrl: tegra: Add SFIO/GPIO programming on Tegra194 ...

Prior to Tegra186, the selection of SFIO vs. GPIO modes was done as part
of the GPIO controller's register programming. Starting with Tegra186, a
pin is configured as GPIO or SFIO with a bit in a configuration register
of the pin controller.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200319122737.3063291-10-thierry.reding@gmail.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2020-03-27 11:46:06 +01:00

..

Kconfig

This is the bulk of pin control changes for the v5.3 kernel

2019-07-13 15:02:27 -07:00

Makefile

pinctrl: tegra: Add Tegra194 pinmux driver

2019-06-01 19:23:06 +02:00

pinctrl-tegra20.c

This is the bulk of pin control changes for the v5.3 kernel

2019-07-13 15:02:27 -07:00

pinctrl-tegra30.c

This is the bulk of pin control changes for the v5.3 kernel

2019-07-13 15:02:27 -07:00

pinctrl-tegra114.c

This is the bulk of pin control changes for the v5.3 kernel

2019-07-13 15:02:27 -07:00

pinctrl-tegra124.c

This is the bulk of pin control changes for the v5.3 kernel

2019-07-13 15:02:27 -07:00

pinctrl-tegra194.c

pinctrl: tegra: Add SFIO/GPIO programming on Tegra194

2020-03-27 11:46:06 +01:00

pinctrl-tegra210.c

pinctrl: tegra210: Add Tegra210 pinctrl pm ops

2019-08-05 11:21:28 +02:00

pinctrl-tegra-xusb.c

pinctrl: use devm_platform_ioremap_resource() to simplify code

2019-11-05 15:33:40 +01:00

pinctrl-tegra.c

pinctrl: tegra: Add SFIO/GPIO programming on Tegra194

2020-03-27 11:46:06 +01:00

pinctrl-tegra.h

pinctrl: tegra: Add SFIO/GPIO programming on Tegra194

2020-03-27 11:46:06 +01:00