Kernel/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-01-11 07:39:47 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Felipe Balbi d1e66d6961 arm: omap: irq: remove unnecessary base_addr argument 
omap_intc_handle_irq now had an unnecessary
base_addr argument. Let's remove it and fix
all callers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-11 13:03:38 -07:00
..
include/mach
ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
2013-12-20 17:17:16 +01:00
am33xx-restart.c
ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards
2013-08-21 01:01:30 -07:00
am33xx.h
ARM: OMAP2+: AM43x: early init
2013-06-12 08:00:35 -07:00
am35xx-emac.c
ARM: 7989/1: Delete asm/system.h
2014-02-25 11:33:37 +00:00
am35xx-emac.h
ARM: OMAP: move generic EMAC init to separate file
2012-03-05 11:08:36 -08:00
am35xx.h
ARM: OMAP2+: Make am35xx.h local
2012-09-20 15:02:23 -07:00
board-3430sdp.c
ARM: OMAP: 3430SDP: use new display drivers
2013-08-28 10:23:21 +03:00
board-am3517crane.c
ARM: OMAP2: remove useless variable 'ret'
2013-08-22 00:15:17 -07:00
board-am3517evm.c
ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
2014-05-16 14:13:07 -07:00
board-cm-t35.c
[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor
2014-02-24 13:10:14 -03:00
board-cm-t3517.c
Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:
2013-04-08 19:30:48 +02:00
board-devkit8000.c
ARM: OMAP: devkit8000: use new display drivers
2013-08-28 10:23:20 +03:00
board-flash.c
mtd: nand: omap: Revert to using software ECC by default
2014-08-25 16:15:32 -07:00
board-flash.h
ARM: OMAP2+: gpmc: localize gpmc header
2012-10-15 14:42:15 +05:30
board-generic.c
ARM: OMAP2+: make of_device_ids const
2014-09-11 12:37:23 -07:00
board-ldp.c
ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
2013-12-27 09:33:27 -08:00
board-n8x0.c
ARM: OMAP2+: dts: add n8x0 onenand
2013-11-25 15:38:09 -08:00
board-omap3beagle.c
pwm: Changes for v3.16-rc1
2014-06-11 14:06:55 -07:00
board-omap3logic.c
arm-soc: cleanups
2013-02-21 14:58:40 -08:00
board-omap3pandora.c
wl1251: move power GPIO handling into the driver
2014-02-28 14:08:26 -05:00
board-omap3stalker.c
ARM: OMAP: omap3stalker: remove two Kconfig macros
2014-05-16 14:10:04 -07:00
board-omap3touchbook.c
arch/arm/mach-omap2: replace strict_strto* with kstrto*
2014-08-08 15:57:27 -07:00
board-overo.c
ARM: OMAP: overo: use new display drivers
2013-08-28 10:23:19 +03:00
board-rx51-peripherals.c
wl1251: move power GPIO handling into the driver
2014-02-28 14:08:26 -05:00
board-rx51-video.c
ARM: OMAP2+: N900: remove omapdss init for DT boot
2014-04-18 16:37:43 -07:00
board-rx51.c
ARM: OMAP3: RX-51: ARM errata 430973 workaround
2013-10-08 11:57:04 -07:00
board-rx51.h
ARM: OMAP2+: Make board-rx51.h local
2012-09-20 15:02:27 -07:00
board-ti8168evm.c
ARM: delete struct sys_timer
2012-12-24 09:36:38 -07:00
cclock3xxx_data.c
ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on all OMAP3 platforms
2014-04-28 15:58:22 -06:00
clkt2xxx_apll.c
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
2013-10-19 10:11:51 -06:00
clkt2xxx_dpll.c
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c
ARM: OMAP2: clock: add DT boot support for cpufreq_ck
2014-05-28 13:05:57 +03:00
clkt34xx_dpll3m2.c
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
clkt_clksel.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clkt_dpll.c
Few fixes for the v3.17 merge window:
2014-08-09 08:23:27 -07:00
clkt_iclk.c
ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file
2014-07-15 14:09:24 -06:00
clock2xxx.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
clock2xxx.h
ARM: OMAP2: convert sys_ck and osc_ck to standard clock types
2014-07-02 14:26:06 +03:00
clock3xxx.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
clock3xxx.h
CLK: TI: add omap3 clock init file
2014-01-17 12:35:48 -08:00
clock34xx.c
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock34xx.h
…
clock36xx.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clock36xx.h
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock44xx.h
…
clock2430.c
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:51 -07:00
clock3517.c
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock3517.h
…
clock_common_data.c
ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:51 -07:00
clock.c
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
clock.h
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
clockdomain.c
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
2013-01-29 14:59:58 -07:00
clockdomain.h
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
clockdomains2xxx_3xxx_data.c
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c
ARM: OMAP3: fix iva mmu programming issues
2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c
ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header
2013-08-23 04:28:36 -06:00
clockdomains33xx_data.c
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
2012-06-18 12:08:06 -06:00
clockdomains43xx_data.c
ARM: OMAP2+: CM: AM43x clockdomain data
2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP
2012-10-29 22:02:13 -06:00
clockdomains54xx_data.c
ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
2013-06-08 11:56:15 -06:00
clockdomains2420_data.c
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
2012-10-18 16:23:46 -07:00
clockdomains2430_data.c
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
2012-10-18 16:23:46 -07:00
cm1_7xx.h
ARM: OMAP: DRA7: CM: Add DRA7XX register defines
2013-08-23 04:24:15 -06:00
cm1_44xx.h
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
2013-06-08 11:41:39 -06:00
cm1_54xx.h
ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
2013-06-08 11:46:09 -06:00
cm2_7xx.h
arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
2014-07-22 14:35:05 -06:00
cm2_44xx.h
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
2013-06-08 11:41:39 -06:00
cm2_54xx.h
ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
2013-06-08 11:46:09 -06:00
cm2xxx_3xxx.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
cm2xxx.c
ARM: OMAP2/3: CM: remove some external dependencies
2014-05-15 22:34:25 -06:00
cm2xxx.h
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
2013-10-19 10:11:51 -06:00
cm3xxx.c
ARM: OMAP2/3: CM: remove some external dependencies
2014-05-15 22:34:25 -06:00
cm3xxx.h
ARM: OMAP3: CM: remove a few OMAP34XX_CM_REGADDR defines
2014-05-11 19:35:13 -06:00
cm33xx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
cm33xx.h
ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-06-15 16:02:17 -06:00
cm44xx.c
Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM
2014-05-16 15:26:22 -07:00
cm44xx.h
…
cm_44xx_54xx.h
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
2013-06-08 11:41:39 -06:00
cm_common.c
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
cm-regbits-7xx.h
ARM: OMAP: DRA7: CM: Add minimal regbit shifts
2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h
ARM: OMAP2: convert sys_ck and osc_ck to standard clock types
2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
ARM: OMAP3: PRM/CM: Cleanup unused header
2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h
ARM: OMAP5: PRM/CM: Cleanup unused header
2013-07-21 22:10:25 -06:00
cm.h
ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
2012-11-08 15:09:26 -07:00
cminst44xx.c
Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM
2014-05-16 15:26:22 -07:00
cminst44xx.h
ARM: OMAP2+: CM: cm_inst offset s16->u16
2013-10-13 22:46:38 -06:00
common-board-devices.c
ARM: arm-soc: Header cleanups
2012-12-12 11:45:16 -08:00
common-board-devices.h
ARM: OMAP2+: Add quirks support for n8x0
2013-11-25 15:31:17 -08:00
common.c
ARM: OMAP2+: remove DSP platform device
2014-07-15 21:01:05 -07:00
common.h
Merge branch 'omap-for-v3.18/fixes-not-urgent' into omap-for-v3.18/intc-v2
2014-09-11 13:03:25 -07:00
control.c
ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
2014-08-01 01:21:14 -07:00
control.h
Merge branch 'for-v3.17/cm-prm-cleanup' of https://github.com/t-kristo/linux-pm into omap-for-v3.17/soc
2014-07-15 07:00:00 -07:00
cpuidle34xx.c
ARM: arm-soc cleanup for 3.10
2013-05-02 09:03:55 -07:00
cpuidle44xx.c
ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
2014-05-19 11:20:38 -07:00
ctrl_module_wkup_44xx.h
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
2012-09-20 15:02:33 -07:00
devices.c
SoC related changes for omaps for v3.17 merge window:
2014-07-26 11:33:34 +02:00
devices.h
…
display.c
OMAPDSS: move 'compatible' converter to omapdss driver
2014-05-28 09:25:15 +03:00
display.h
ARM: OMAP2+: add omapdss_init_of()
2014-03-19 10:52:23 +02:00
dma.c
ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
2014-07-21 23:32:51 -07:00
dpll3xxx.c
Modify OMAP PLL rate rounding function to round to the exact rate requested
2014-07-29 04:03:30 -07:00
dpll44xx.c
ARM: OMAP4+: dpll44xx: remove cm-regbits-44xx.h and clock44xx.h includes
2014-07-15 14:08:49 -06:00
drm.c
ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
2013-10-08 14:02:35 -07:00
dss-common.c
ARM: OMAP2+: remove pdata quirks for displays
2014-04-04 09:55:18 +03:00
dss-common.h
ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
2013-10-09 07:54:34 -07:00
emu.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
fb.c
ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
2013-10-08 14:02:51 -07:00
gpio.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
gpmc-nand.c
mtd: nand: omap: Revert to using software ECC by default
2014-08-25 16:15:32 -07:00
gpmc-nand.h
ARM: OMAP2+: gpmc: localize gpmc header
2012-10-15 14:42:15 +05:30
gpmc-onenand.c
ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-03 10:59:50 -07:00
gpmc-onenand.h
ARM: OMAP2+: onenand: header cleanup
2012-10-15 14:42:03 +05:30
gpmc-smc91x.c
ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
2013-04-01 14:53:43 -05:00
gpmc-smc91x.h
ARM: OMAP2+: Make gpmc-smc91x.h local
2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
ARM: OMAP2+: Make gpmc-smsc911x.h local
2012-09-20 15:03:55 -07:00
gpmc.c
ARM: OMAP2+: make of_device_ids const
2014-09-11 12:37:23 -07:00
gpmc.h
ARM: OMAP2+: Add function to read GPMC settings from device-tree
2013-04-01 14:53:45 -05:00
hdq1w.c
ARM: omap2+: skip device build from platform code for dt
2014-05-14 14:41:25 -07:00
hdq1w.h
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00
hsmmc.c
ARM: OMAP2+: Remove omap4 pdata from hsmmc.c
2013-05-30 13:09:31 -07:00
hsmmc.h
MMC highlights for 3.4:
2012-03-28 20:59:45 -07:00
hwspinlock.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
i2c.c
PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
2013-07-15 11:25:01 +09:30
i2c.h
ARM: OMAP: Fix relative includes for shared i2c.h file
2012-10-31 15:37:13 -07:00
id.c
ARM: OMAP: fix %d confusingly prefixed with 0x in format string
2014-08-25 16:15:34 -07:00
id.h
ARM: OMAP2+: Make id.h local
2012-09-20 15:02:22 -07:00
io.c
ARM: DRA7: Add hook in SoC initcalls to enable pm initialization
2014-09-08 15:50:39 -07:00
iomap.h
ARM: OMAP5: Add minimal support for OMAP5430 SOC
2012-07-09 19:14:39 +05:30
irq.c
arm: omap: irq: remove unnecessary base_addr argument
2014-09-11 13:03:38 -07:00
Kconfig
ARM: omap: Remove stray ARCH_HAS_OPP references
2014-09-08 17:20:10 -07:00
l3_2xxx.h
ARM: OMAP2+: Make l3_2xxx.h local
2012-09-20 15:03:59 -07:00
l3_3xxx.h
ARM: OMAP2+: Make l3_3xxx.h local
2012-09-20 15:04:00 -07:00
l4_2xxx.h
ARM: OMAP2+: Make l4_2xxx.h local
2012-09-20 15:04:01 -07:00
l4_3xxx.h
ARM: OMAP2+: Make l4_3xxx.h local
2012-09-20 15:04:03 -07:00
Makefile
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
Makefile.boot
ARM: dtb: move all dtb targets to common Makefile
2012-09-20 22:58:17 -07:00
mcbsp.c
ARM: OMAP3: McBSP: do not access CM register directly
2013-10-19 10:11:51 -06:00
mmc.h
ARM: OMAP: Split plat/mmc.h into local headers and platform_data
2012-10-15 12:09:43 -07:00
msdi.c
ARM: OMAP2+: Remove legacy booting support for n8x0
2013-11-25 15:31:17 -08:00
mux34xx.c
ARM: OMAP2+: mux: fix trivial typo in name
2013-09-18 12:02:01 -07:00
mux34xx.h
omap: mux: add AM/DM37x gpios
2013-05-08 17:07:40 -07:00
mux.c
arch/arm/mach-omap2: replace strict_strto* with kstrto*
2014-08-08 15:57:27 -07:00
mux.h
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
2014-02-28 15:36:34 -08:00
omap2-restart.c
reboot: arm: change reboot_mode to use enum reboot_mode
2013-07-09 10:33:29 -07:00
omap3-restart.c
reboot: arm: change reboot_mode to use enum reboot_mode
2013-07-09 10:33:29 -07:00
omap4-common.c
ARM: OMAP2+: l2c: squelch warning dump on power control setting
2014-07-14 09:24:43 -07:00
omap4-restart.c
reboot: arm: change reboot_mode to use enum reboot_mode
2013-07-09 10:33:29 -07:00
omap4-sar-layout.h
ARM: arm-soc cleanup for 3.10
2013-05-02 09:03:55 -07:00
omap24xx.h
ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2
2012-09-12 18:06:31 -07:00
omap34xx.h
ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2
2012-09-12 18:06:31 -07:00
omap44xx.h
ARM: OMAP: Make use of available scu_a9_get_base() interface
2013-01-28 10:41:39 -07:00
omap54xx.h
ARM: DRA7: Reuse io tables and add a new .init_early
2013-08-13 11:00:35 +05:30
omap_device.c
ARM: OMAP2+: omap_device: remove warning that clk alias already exists
2014-08-25 16:15:34 -07:00
omap_device.h
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c
ARM: OMAP2+: Remove legacy hwmod entries for omap2
2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
2013-12-25 21:41:27 -07:00
omap_hwmod_3xxx_data.c
ARM: omap: Don't set iommu pdata da_start and da_end fields
2014-07-29 12:39:23 +02:00
omap_hwmod_7xx_data.c
ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
2014-08-27 19:38:23 -06:00
omap_hwmod_33xx_43xx_common_data.h
ARM: OMAP2+: hwmod: AM43x support
2013-10-13 22:48:46 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c
ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
omap_hwmod_33xx_data.c
ARM: OMAP2+: hwmod: AM335x: runtime register update
2013-10-13 22:47:56 -06:00
omap_hwmod_43xx_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_44xx_data.c
ARM: SoC platform changes for 3.17
2014-08-08 11:14:29 -07:00
omap_hwmod_54xx_data.c
ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
2014-06-15 20:12:52 -06:00
omap_hwmod_2420_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_common_data.c
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
ARM: omap2: include linux/errno.h in hwmod_reset
2013-02-15 13:36:47 +01:00
omap_hwmod.c
Add basic subarchitecture support for the DRA72x and DRA74x. These
2014-08-31 10:19:43 -07:00
omap_hwmod.h
ARM: OMAP2+: hwmod: AM43x support
2013-10-13 22:48:46 -06:00
omap_opp_data.h
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
2012-11-13 13:25:38 -08:00
omap_phy_internal.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
omap_twl.c
mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
2014-04-23 15:31:05 +01:00
omap-headsmp.S
ARM: OMAP5: Redo THUMB mode switch on secondary CPU
2014-05-05 17:32:25 -07:00
omap-hotplug.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
omap-iommu.c
ARM: omap: Don't set iommu pdata da_start and da_end fields
2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c
Merge branch 'pull/v3.18/for-omap-soc' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/soc
2014-09-08 15:20:15 -07:00
omap-pm-noop.c
ARM: OMAP: Move omap-pm-noop.c local to mach-omap2
2012-10-31 15:37:13 -07:00
omap-pm.h
PM / OPP: rename header to linux/pm_opp.h
2013-10-25 22:33:23 +02:00
omap-secure.c
RX-51: Add support for OMAP3 ROM Random Number Generator
2013-10-08 12:02:12 -07:00
omap-secure.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
omap-smc.S
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
2013-10-08 11:55:32 -07:00
omap-smp.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
omap-wakeupgen.c
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
omap-wakeupgen.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
opp2xxx.h
…
opp3xxx_data.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
opp4xxx_data.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
opp2420_data.c
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
2012-09-12 18:06:31 -07:00
opp2430_data.c
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
2012-09-12 18:06:31 -07:00
opp.c
ACPI and power management updates for 3.13-rc1
2013-11-14 13:41:48 +09:00
pdata-quirks.c
Merge branch 'omap-for-v3.18/fixes-not-urgent' into omap-for-v3.18/intc-v2
2014-09-11 13:03:25 -07:00
pm24xx.c
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
pm34xx.c
ARM: OMAP3: control: isolate control module init to its own function
2014-07-04 17:02:21 +03:00
pm44xx.c
Merge branch 'pull/v3.18/for-omap-soc' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/soc
2014-09-08 15:20:15 -07:00
pm-debug.c
Merge branch 'cleanup' into for-linus
2013-05-02 21:31:29 +01:00
pm.c
PM related fixes for omap3 that were discovered during omap3
2014-05-26 13:24:56 -07:00
pm.h
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
pmu.c
ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
2013-07-04 05:10:51 -07:00
powerdomain-common.c
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
2014-05-15 22:35:10 -06:00
powerdomain.c
ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
2014-09-08 11:22:41 -05:00
powerdomain.h
ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
2014-09-08 11:22:41 -05:00
powerdomains2xxx_3xxx_data.c
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.h
…
powerdomains2xxx_data.c
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
2013-01-29 14:59:58 -07:00
powerdomains3xxx_data.c
ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
2013-08-23 04:48:42 -06:00
powerdomains7xx_data.c
ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
ARM: OMAP AM33xx: powerdomains: add AM335x support
2012-06-18 12:08:06 -06:00
powerdomains43xx_data.c
ARM: OMAP2+: PM: AM43x powerdomain data
2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
…
powerdomains54xx_data.c
ARM: OMAP5: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:40 -05:00
prcm43xx.h
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
prcm44xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
2013-06-08 11:54:40 -06:00
prcm-common.h
ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
2014-05-15 22:34:54 -06:00
prm2xxx_3xxx.c
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
prm2xxx_3xxx.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
prm2xxx.c
ARM: OMAP24xx: PRM: add API for clearing wakeup status bits
2014-07-04 17:02:16 +03:00
prm2xxx.h
ARM: OMAP24xx: PRM: add API for clearing wakeup status bits
2014-07-04 17:02:16 +03:00
prm3xxx.c
ARM: OMAP3+: PRM: register interrupt information from DT
2014-09-08 10:54:06 -05:00
prm3xxx.h
ARM: OMAP3: PRM: move PRM init code from PM core to the driver
2014-07-04 17:02:17 +03:00
prm7xx.h
arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
2014-07-22 14:35:05 -06:00
prm33xx.c
Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM
2014-05-16 15:26:22 -07:00
prm33xx.h
ARM: OMAP2+: AM33XX: Update the hardreset API
2013-02-08 07:25:28 -07:00
prm44xx_54xx.h
ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
2013-11-18 11:03:37 -08:00
prm44xx.c
ARM: OMAP4+: PRM: Enable wakeup capability for OMAP5, DRA7
2014-09-08 10:53:56 -05:00
prm44xx.h
ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
2013-06-08 11:02:20 -06:00
prm54xx.h
ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
2013-06-08 11:41:01 -06:00
prm_common.c
ARM: OMAP2+: make of_device_ids const
2014-09-11 12:37:23 -07:00
prm-regbits-24xx.h
ARM: OMAP2: PRM/CM: Cleanup unused header
2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h
ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
prm.h
ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
2014-05-15 22:35:04 -06:00
prminst44xx.c
ARM: OMAP4+: prminst: provide function to find prm_dev instance offset
2014-09-08 10:53:25 -05:00
prminst44xx.h
ARM: OMAP4+: prminst: provide function to find prm_dev instance offset
2014-09-08 10:53:25 -05:00
scrm44xx.h
ARM: OMAP4: clock: Add 44xx data using common struct clk
2012-11-12 19:10:20 -07:00
scrm54xx.h
ARM: OMAP5: SCRM: Add OMAP54XX header file.
2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-nokia.c
ARM: OMAP: remove plat/clock.h
2012-10-18 16:23:20 -07:00
sdram-nokia.h
…
sdram-numonyx-m65kxxxxam.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdrc2xxx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
sdrc.c
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
sdrc.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
serial.c
ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL
2013-07-30 05:13:35 -06:00
serial.h
ARM: OMAP2+: Fix relative includes for serial.h
2012-10-31 15:37:14 -07:00
sleep24xx.S
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
2013-02-06 13:48:14 -07:00
sleep34xx.S
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
sleep44xx.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
smartreflex-class3.c
PM / AVS: SmartReflex: use omap_sr * for enable/disable interface
2013-06-10 10:46:18 -07:00
soc.h
ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
2014-08-27 19:38:22 -06:00
sr_device.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
sram34xx.S
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
2012-10-21 01:01:11 -06:00
sram242x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram243x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
sram.h
ARM: OMAP: Split sram.h to local headers and minimal shared header
2012-10-31 10:14:13 -07:00
ti81xx.h
ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
2012-11-08 12:33:07 -07:00
timer.c
ARM: OMAP2+: make of_device_ids const
2014-09-11 12:37:23 -07:00
twl-common.c
arm: omap3: twl: add phy consumer data in twl4030_usb_data
2013-09-27 17:36:58 -07:00
twl-common.h
ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
2013-01-22 10:34:50 +01:00
usb-host.c
usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
2014-04-21 14:07:24 -05:00
usb-musb.c
ARM: OMAP2: fix musb usage for n8x0
2013-08-16 09:39:56 -07:00
usb-tusb6010.c
ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once
2014-07-07 04:52:31 -07:00
usb.h
ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
2013-10-04 09:29:10 -05:00
vc3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vc44xx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vc.c
ARM: SoC updates for 3.16 (part 1)
2014-06-02 16:15:12 -07:00
vc.h
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode
2014-05-06 13:48:35 -07:00
voltage.c
ARM: OMAP: unwrap strings
2012-09-12 02:57:10 -06:00
voltage.h
Merge branch 'omap/pm-voltdomain-cleanup' into next/soc
2013-06-20 17:35:16 +02:00
voltagedomains2xxx_data.c
…
voltagedomains3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
voltagedomains44xx_data.c
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
2012-11-13 13:25:38 -08:00
voltagedomains54xx_data.c
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
2013-06-25 17:11:06 -07:00
vp3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vp44xx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vp.c
OMAP voltage layer updates towards supporting auto-retention/auto-off
2012-11-06 17:06:37 -08:00
vp.h
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
wd_timer.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
wd_timer.h
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00