linux/tools/perf/Makefile.config
Linus Torvalds 9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00

1190 lines
34 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0-only
ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif
ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif
ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif
$(shell printf "" > $(OUTPUT).config-detected)
detected = $(shell echo "$(1)=y" >> $(OUTPUT).config-detected)
detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)
CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
include $(srctree)/tools/scripts/Makefile.arch
$(call detected_var,SRCARCH)
NO_PERF_REGS := 1
ifneq ($(NO_SYSCALL_TABLE),1)
NO_SYSCALL_TABLE := 1
ifeq ($(SRCARCH),x86)
ifeq (${IS_64_BIT}, 1)
NO_SYSCALL_TABLE := 0
endif
else
ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390))
NO_SYSCALL_TABLE := 0
endif
endif
ifneq ($(NO_SYSCALL_TABLE),1)
CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT
endif
endif
# Additional ARCH settings for ppc
ifeq ($(SRCARCH),powerpc)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
endif
# Additional ARCH settings for x86
ifeq ($(SRCARCH),x86)
$(call detected,CONFIG_X86)
ifeq (${IS_64_BIT}, 1)
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma
$(call detected,CONFIG_X86_64)
else
LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
endif
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
ifeq ($(SRCARCH),arm64)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/arm64/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif
ifeq ($(SRCARCH),riscv)
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),csky)
NO_PERF_REGS := 0
endif
ifeq ($(ARCH),s390)
NO_PERF_REGS := 0
CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated
endif
ifeq ($(NO_PERF_REGS),0)
$(call detected,CONFIG_PERF_REGS)
endif
# So far there's only x86 and arm libdw unwind support merged in perf.
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv))
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#
libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
define libunwind_arch_set_flags_code
FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include
FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
endef
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
$(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
endif
# Set per-feature check compilation flags
FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_LDFLAGS-libunwind-arm = -lunwind -lunwind-arm
FEATURE_CHECK_LDFLAGS-libunwind-aarch64 = -lunwind -lunwind-aarch64
FEATURE_CHECK_LDFLAGS-libunwind-x86 = -lunwind -llzma -lunwind-x86
FEATURE_CHECK_LDFLAGS-libunwind-x86_64 = -lunwind -llzma -lunwind-x86_64
FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
ifdef CSINCLUDES
LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
endif
OPENCSDLIBS := -lopencsd_c_api -lopencsd
ifdef CSLIBS
LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
endif
FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS)
ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
DWARFLIBS := -ldw
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -ldl -lz -llzma -lbz2
endif
FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS)
# for linking with debug library, run like:
# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
ifdef LIBBABELTRACE_DIR
LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
ifdef LIBZSTD_DIR
LIBZSTD_CFLAGS := -I$(LIBZSTD_DIR)/lib
LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS)
FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
-include $(src-perf)/arch/$(SRCARCH)/Makefile
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
endif
include $(srctree)/tools/scripts/utilities.mak
ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif
ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CORE_CFLAGS += -Werror
CXXFLAGS += -Werror
endif
ifndef DEBUG
DEBUG := 0
endif
ifeq ($(DEBUG),0)
ifeq ($(CC_NO_CLANG), 0)
CORE_CFLAGS += -O3
else
CORE_CFLAGS += -O6
endif
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
$(call detected_var,PARSER_DEBUG_BISON)
$(call detected_var,PARSER_DEBUG_FLEX)
endif
# Try different combinations to accommodate systems that only have
# python[2][-config] in weird combinations but always preferring
# python2 and python2-config as per pep-0394. If we catch a
# python[-config] in version 3, the version check will kill it.
PYTHON2 := $(if $(call get-executable,python2),python2,python)
override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON2))
PYTHON2_CONFIG := \
$(if $(call get-executable,$(PYTHON)-config),$(PYTHON)-config,python-config)
override PYTHON_CONFIG := \
$(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON2_CONFIG))
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
# Python 3.8 changed the output of `python-config --ldflags` to not include the
# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
# libpython fails if that flag is not included in LDFLAGS
ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
PYTHON_CONFIG_LDFLAGS := --ldflags --embed
else
PYTHON_CONFIG_LDFLAGS := --ldflags
endif
ifdef PYTHON_CONFIG
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
endif
FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_LDFLAGS-libaio = -lrt
FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl
CORE_CFLAGS += -fno-omit-frame-pointer
CORE_CFLAGS += -ggdb3
CORE_CFLAGS += -funwind-tables
CORE_CFLAGS += -Wall
CORE_CFLAGS += -Wextra
CORE_CFLAGS += -std=gnu99
CXXFLAGS += -std=gnu++11 -fno-exceptions -fno-rtti
CXXFLAGS += -Wall
CXXFLAGS += -fno-omit-frame-pointer
CXXFLAGS += -ggdb3
CXXFLAGS += -funwind-tables
CXXFLAGS += -Wno-strict-aliasing
# Enforce a non-executable stack, as we may regress (again) in the future by
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack
EXTLIBS = -lpthread -lrt -lm -ldl
ifneq ($(TCMALLOC),)
CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free
EXTLIBS += -ltcmalloc
endif
ifeq ($(FEATURES_DUMP),)
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif
ifeq ($(feature-stackprotector-all), 1)
CORE_CFLAGS += -fstack-protector-all
endif
ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CORE_CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif
INC_FLAGS += -I$(srctree)/tools/lib/perf/include
INC_FLAGS += -I$(src-perf)/util/include
INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
INC_FLAGS += -I$(srctree)/tools/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
INC_FLAGS += -I$(srctree)/tools/include/uapi
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
INC_FLAGS += -I$(obj-perf)/util
INC_FLAGS += -I$(obj-perf)
endif
INC_FLAGS += -I$(src-perf)/util
INC_FLAGS += -I$(src-perf)
INC_FLAGS += -I$(srctree)/tools/lib/
CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
CFLAGS += $(CORE_CFLAGS) $(INC_FLAGS)
CXXFLAGS += $(INC_FLAGS)
LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)
ifeq ($(feature-sync-compare-and-swap), 1)
CFLAGS += -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
endif
ifeq ($(feature-pthread-attr-setaffinity-np), 1)
CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
endif
ifeq ($(feature-pthread-barrier), 1)
CFLAGS += -DHAVE_PTHREAD_BARRIER
endif
ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE
CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif
ifeq ($(feature-eventfd), 1)
CFLAGS += -DHAVE_EVENTFD_SUPPORT
endif
ifeq ($(feature-get_current_dir_name), 1)
CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
endif
ifeq ($(feature-gettid), 1)
CFLAGS += -DHAVE_GETTID
endif
ifeq ($(feature-file-handle), 1)
CFLAGS += -DHAVE_FILE_HANDLE
endif
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found. Disables 'probe' tool, jvmti and BPF support in 'perf record'. Please install libelf-dev, libelf-devel or elfutils-libelf-devel);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libasan found, please install libasan);
endif
endif
ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libubsan found, please install libubsan);
endif
endif
ifneq ($(filter s% -static%,$(LDFLAGS),),)
msg := $(error No static glibc found, please install glibc-static);
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
endif
else
ifndef NO_LIBDW_DWARF_UNWIND
ifneq ($(feature-libdw-dwarf-unwind),1)
NO_LIBDW_DWARF_UNWIND := 1
msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
endif
endif
ifneq ($(feature-dwarf), 1)
ifndef NO_DWARF
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif
else
ifneq ($(feature-dwarf_getlocations), 1)
msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
else
CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT
endif # dwarf_getlocations
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF
ifeq ($(feature-glibc), 1)
CFLAGS += -DHAVE_GLIBC_SUPPORT
endif
ifeq ($(feature-libaio), 1)
ifndef NO_AIO
CFLAGS += -DHAVE_AIO_SUPPORT
endif
endif
ifdef NO_DWARF
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(feature-sched_getcpu), 1)
CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT
endif
ifeq ($(feature-setns), 1)
CFLAGS += -DHAVE_SETNS_SUPPORT
$(call detected,CONFIG_SETNS)
endif
ifdef CORESIGHT
$(call feature_check,libopencsd)
ifeq ($(feature-libopencsd), 1)
CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS)
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
LDFLAGS += $(LIBOPENCSD_LDFLAGS)
EXTLIBS += $(OPENCSDLIBS)
$(call detected,CONFIG_LIBOPENCSD)
ifdef CSTRACE_RAW
CFLAGS += -DCS_DEBUG_RAW
ifeq (${CSTRACE_RAW}, packed)
CFLAGS += -DCS_RAW_PACKED
endif
endif
endif
endif
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
EXTLIBS += -lelf
$(call detected,CONFIG_LIBELF)
ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif
ifeq ($(feature-libelf-gelf_getnote), 1)
CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
else
msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
endif
ifeq ($(feature-libelf-getshdrstrndx), 1)
CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
endif
ifndef NO_LIBDEBUGINFOD
$(call feature_check,libdebuginfod)
ifeq ($(feature-libdebuginfod), 1)
CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT
EXTLIBS += -ldebuginfod
endif
endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
EXTLIBS += ${DWARFLIBS}
$(call detected,CONFIG_DWARF)
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
ifndef NO_LIBBPF
ifeq ($(feature-bpf), 1)
CFLAGS += -DHAVE_LIBBPF_SUPPORT
$(call detected,CONFIG_LIBBPF)
# detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status
$(call feature_check,libbpf)
ifdef LIBBPF_DYNAMIC
ifeq ($(feature-libbpf), 1)
EXTLIBS += -lbpf
else
dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
endif
endif
endif
ifndef NO_DWARF
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
endif
endif # NO_LIBBPF
endif # NO_LIBELF
ifndef NO_SDT
ifneq ($(feature-sdt), 1)
msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
NO_SDT := 1;
else
CFLAGS += -DHAVE_SDT_EVENT
$(call detected,CONFIG_SDT_EVENT)
endif
endif
ifdef PERF_HAVE_JITDUMP
ifndef NO_LIBELF
$(call detected,CONFIG_JITDUMP)
CFLAGS += -DHAVE_JITDUMP
endif
endif
ifeq ($(SRCARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
endif
ifndef NO_LIBUNWIND
have_libunwind :=
$(call feature_check,libunwind-x86)
ifeq ($(feature-libunwind-x86), 1)
$(call detected,CONFIG_LIBUNWIND_X86)
CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
LDFLAGS += -lunwind-x86
EXTLIBS_LIBUNWIND += -lunwind-x86
have_libunwind = 1
endif
$(call feature_check,libunwind-aarch64)
ifeq ($(feature-libunwind-aarch64), 1)
$(call detected,CONFIG_LIBUNWIND_AARCH64)
CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
LDFLAGS += -lunwind-aarch64
EXTLIBS_LIBUNWIND += -lunwind-aarch64
have_libunwind = 1
$(call feature_check,libunwind-debug-frame-aarch64)
ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
msg := $(warning No debug_frame support found in libunwind-aarch64);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
endif
endif
ifneq ($(feature-libunwind), 1)
msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
NO_LOCAL_LIBUNWIND := 1
else
have_libunwind := 1
$(call detected,CONFIG_LOCAL_LIBUNWIND)
endif
ifneq ($(have_libunwind), 1)
NO_LIBUNWIND := 1
endif
else
NO_LOCAL_LIBUNWIND := 1
endif
ifndef NO_LIBBPF
ifneq ($(feature-bpf), 1)
msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
NO_LIBBPF := 1
endif
endif
dwarf-post-unwind := 1
dwarf-post-unwind-text := BUG
# setup DWARF post unwinder
ifdef NO_LIBUNWIND
ifdef NO_LIBDW_DWARF_UNWIND
msg := $(warning Disabling post unwind, no support found.);
dwarf-post-unwind := 0
else
dwarf-post-unwind-text := libdw
$(call detected,CONFIG_LIBDW_DWARF_UNWIND)
endif
else
dwarf-post-unwind-text := libunwind
$(call detected,CONFIG_LIBUNWIND)
# Enable libunwind support by default.
ifndef NO_LIBDW_DWARF_UNWIND
NO_LIBDW_DWARF_UNWIND := 1
endif
endif
ifeq ($(dwarf-post-unwind),1)
CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
$(call detected,CONFIG_DWARF_UNWIND)
else
NO_DWARF_UNWIND := 1
endif
ifndef NO_LOCAL_LIBUNWIND
ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
else
# non-ARM has no dwarf_find_debug_frame() function:
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
EXTLIBS += $(LIBUNWIND_LIBS)
LDFLAGS += $(LIBUNWIND_LIBS)
endif
ifeq ($(findstring -static,${LDFLAGS}),-static)
# gcc -static links libgcc_eh which contans piece of libunwind
LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition
endif
ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
EXTLIBS += $(EXTLIBS_LIBUNWIND)
endif
ifeq ($(NO_SYSCALL_TABLE),0)
$(call detected,CONFIG_TRACE)
else
ifndef NO_LIBAUDIT
$(call feature_check,libaudit)
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
$(call detected,CONFIG_TRACE)
endif
endif
endif
ifndef NO_LIBCRYPTO
ifneq ($(feature-libcrypto), 1)
msg := $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev);
NO_LIBCRYPTO := 1
else
CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
EXTLIBS += -lcrypto
$(call detected,CONFIG_CRYPTO)
endif
endif
ifdef NO_NEWT
NO_SLANG=1
endif
ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
ifneq ($(feature-libslang-include-subdir), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
NO_SLANG := 1
else
CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
endif
endif
ifndef NO_SLANG
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
$(call detected,CONFIG_SLANG)
endif
endif
ifndef NO_GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif
ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
CFLAGS += -DHAVE_LIBPERL_SUPPORT
$(call detected,CONFIG_LIBPERL)
endif
endif
ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(warning $1)
NO_LIBPYTHON := 1
endef
ifdef NO_LIBPYTHON
$(call disable-python,Python support disabled by user)
else
ifndef PYTHON
$(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifndef PYTHON_CONFIG
$(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
else
ifneq ($(feature-libpython), 1)
$(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
else
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
CFLAGS += -DHAVE_LIBPYTHON_SUPPORT
$(call detected,CONFIG_LIBPYTHON)
endif
endif
endif
endif
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd -lopcodes
else
# we are on a system that requires -liberty and (maybe) -lz
# to link against -lbfd; test each case individually here
# call all detections now so we get correct
# status in VF output
$(call feature_check,libbfd-liberty)
$(call feature_check,libbfd-liberty-z)
ifeq ($(feature-libbfd-liberty), 1)
EXTLIBS += -lbfd -lopcodes -liberty
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -ldl
else
ifeq ($(feature-libbfd-liberty-z), 1)
EXTLIBS += -lbfd -lopcodes -liberty -lz
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -lz -ldl
endif
endif
$(call feature_check,disassembler-four-args)
endif
ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
else
ifeq ($(filter -liberty,$(EXTLIBS)),)
$(call feature_check,cplus-demangle)
# we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
# or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
else
msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif
ifneq ($(filter -liberty,$(EXTLIBS)),)
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
endif
endif
ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
ifndef NO_ZLIB
ifeq ($(feature-zlib), 1)
CFLAGS += -DHAVE_ZLIB_SUPPORT
EXTLIBS += -lz
$(call detected,CONFIG_ZLIB)
else
NO_ZLIB := 1
endif
endif
ifndef NO_LZMA
ifeq ($(feature-lzma), 1)
CFLAGS += -DHAVE_LZMA_SUPPORT
EXTLIBS += -llzma
$(call detected,CONFIG_LZMA)
else
msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
NO_LZMA := 1
endif
endif
ifndef NO_LIBZSTD
ifeq ($(feature-libzstd), 1)
CFLAGS += -DHAVE_ZSTD_SUPPORT
CFLAGS += $(LIBZSTD_CFLAGS)
LDFLAGS += $(LIBZSTD_LDFLAGS)
EXTLIBS += -lzstd
$(call detected,CONFIG_ZSTD)
else
msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR);
NO_LIBZSTD := 1
endif
endif
ifndef NO_LIBCAP
ifeq ($(feature-libcap), 1)
CFLAGS += -DHAVE_LIBCAP_SUPPORT
EXTLIBS += -lcap
$(call detected,CONFIG_LIBCAP)
else
msg := $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev);
NO_LIBCAP := 1
endif
endif
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif
ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
ifeq ($(feature-numa_num_possible_cpus), 0)
msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
$(call detected,CONFIG_NUMA)
endif
endif
endif
ifdef HAVE_KVM_STAT_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif
ifeq ($(feature-disassembler-four-args), 1)
CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
endif
ifeq (${IS_64_BIT}, 1)
ifndef NO_PERF_READ_VDSO32
$(call feature_check,compile-32)
ifeq ($(feature-compile-32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSO32
else
NO_PERF_READ_VDSO32 := 1
endif
endif
ifneq ($(SRCARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
$(call feature_check,compile-x32)
ifeq ($(feature-compile-x32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSOX32
else
NO_PERF_READ_VDSOX32 := 1
endif
endif
else
NO_PERF_READ_VDSO32 := 1
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_LIBBABELTRACE
$(call feature_check,libbabeltrace)
ifeq ($(feature-libbabeltrace), 1)
CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
EXTLIBS += -lbabeltrace-ctf
$(call detected,CONFIG_LIBBABELTRACE)
else
msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
endif
endif
ifndef NO_AUXTRACE
ifeq ($(SRCARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
endif
endif
ifndef NO_AUXTRACE
$(call detected,CONFIG_AUXTRACE)
CFLAGS += -DHAVE_AUXTRACE_SUPPORT
endif
endif
ifndef NO_JVMTI
ifneq (,$(wildcard /usr/sbin/update-java-alternatives))
JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
else
ifneq (,$(wildcard /usr/sbin/alternatives))
JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
endif
endif
ifndef JDIR
$(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory)
NO_JVMTI := 1
endif
endif
ifndef NO_JVMTI
FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux
$(call feature_check,jvmti)
ifeq ($(feature-jvmti), 1)
$(call detected_var,JDIR)
ifndef NO_JVMTI_CMLR
FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti)
$(call feature_check,jvmti-cmlr)
ifeq ($(feature-jvmti-cmlr), 1)
CFLAGS += -DHAVE_JVMTI_CMLR
endif
endif # NO_JVMTI_CMLR
else
$(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel)
NO_JVMTI := 1
endif
endif
USE_CXX = 0
USE_CLANGLLVM = 0
ifdef LIBCLANGLLVM
$(call feature_check,cxx)
ifneq ($(feature-cxx), 1)
msg := $(warning No g++ found, disable clang and llvm support. Please install g++)
else
$(call feature_check,llvm)
$(call feature_check,llvm-version)
ifneq ($(feature-llvm), 1)
msg := $(warning No suitable libLLVM found, disabling builtin clang and LLVM support. Please install llvm-dev(el) (>= 3.9.0))
else
$(call feature_check,clang)
ifneq ($(feature-clang), 1)
msg := $(warning No suitable libclang found, disabling builtin clang and LLVM support. Please install libclang-dev(el) (>= 3.9.0))
else
CFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT
CXXFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT -I$(shell $(LLVM_CONFIG) --includedir)
$(call detected,CONFIG_CXX)
$(call detected,CONFIG_CLANGLLVM)
USE_CXX = 1
USE_LLVM = 1
USE_CLANG = 1
ifneq ($(feature-llvm-version),1)
msg := $(warning This version of LLVM is not tested. May cause build errors)
endif
endif
endif
endif
endif
ifdef LIBPFM4
$(call feature_check,libpfm4)
ifeq ($(feature-libpfm4), 1)
CFLAGS += -DHAVE_LIBPFM
EXTLIBS += -lpfm
ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
$(call detected,CONFIG_LIBPFM4)
else
msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
NO_LIBPFM4 := 1
endif
endif
# Among the variables below, these:
# perfexecdir
# perf_include_dir
# perf_examples_dir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix ?= $(HOME)
endif
bindir_relative = bin
bindir = $(abspath $(prefix)/$(bindir_relative))
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
perf_include_dir = lib/perf/include
perf_examples_dir = lib/perf/examples
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
STRACE_GROUPS_DIR = share/perf-core/strace/groups
htmldir = share/doc/perf-doc
tipdir = share/doc/perf-tip
srcdir = $(srctree)/tools/perf
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
ifeq ($(SRCARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
endif
endif # lib
libdir = $(prefix)/$(lib)
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
perf_include_dir_SQ = $(subst ','\'',$(perf_include_dir))
perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
tipdir_SQ = $(subst ','\'',$(tipdir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
srcdir_SQ = $(subst ','\'',$(srcdir))
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
perf_include_instdir = $(perf_include_dir)
perf_examples_instdir = $(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
tip_instdir = $(tipdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
perf_include_instdir = $(prefix)/$(perf_include_dir)
perf_examples_instdir = $(prefix)/$(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
tip_instdir = $(prefix)/$(tipdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir))
perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir))
STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
tip_instdir_SQ = $(subst ','\'',$(tip_instdir))
# If we install to $(HOME) we keep the traceevent default:
# $(HOME)/.traceevent/plugins
# Otherwise we install plugins into the global $(libdir).
ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
endif
print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef
ifeq ($(VF),1)
# Display EXTRA features which are detected manualy
# from here with feature_check call and thus cannot
# be partof global state output.
$(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),))
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
$(call print_var,sysconfdir)
$(call print_var,LIBUNWIND_DIR)
$(call print_var,LIBDW_DIR)
$(call print_var,JDIR)
ifeq ($(dwarf-post-unwind),1)
$(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
endif
$(info )
endif
$(call detected_var,bindir_SQ)
$(call detected_var,PYTHON_WORD)
ifneq ($(OUTPUT),)
$(call detected_var,OUTPUT)
endif
$(call detected_var,htmldir_SQ)
$(call detected_var,infodir_SQ)
$(call detected_var,mandir_SQ)
$(call detected_var,ETC_PERFCONFIG_SQ)
$(call detected_var,STRACE_GROUPS_DIR_SQ)
$(call detected_var,prefix_SQ)
$(call detected_var,perfexecdir_SQ)
$(call detected_var,perf_include_dir_SQ)
$(call detected_var,perf_examples_dir_SQ)
$(call detected_var,tipdir_SQ)
$(call detected_var,srcdir_SQ)
$(call detected_var,LIBDIR)
$(call detected_var,GTK_CFLAGS)
$(call detected_var,PERL_EMBED_CCOPTS)
$(call detected_var,PYTHON_EMBED_CCOPTS)