Petre Rodan df3186e829 iio: pressure: hsc030pa add mandatory delay ... Add a mandatory 2ms delay between consecutive chip reads. A Technical Note pdf specifies that the measurement cycle in these chips takes around 1.26ms. By adding this 2ms delay we make sure that we never get stale measurements. For more details, please see "Figure 1" in the pdf below: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro> Link: https://lore.kernel.org/r/20240211075645.28777-6-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2024-02-19 19:32:22 +00:00
..
abp060mg.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
bmp280-core.c	iio: pressure: bmp280: Add support for BMP390	2023-11-16 19:10:27 +00:00
bmp280-i2c.c	iio: pressure: bmp280: Rearrange vars in reverse xmas tree order	2023-11-16 19:10:27 +00:00
bmp280-regmap.c	iio: pressure: bmp280: Add support for new sensor BMP580	2023-03-11 12:18:29 +00:00
bmp280-spi.c	iio: pressure: bmp280: Rearrange vars in reverse xmas tree order	2023-11-16 19:10:27 +00:00
bmp280.h	iio: pressure: bmp280: Add support for BMP390	2023-11-16 19:10:27 +00:00
cros_ec_baro.c	iio: cros: Register FIFO callback after sensor is registered	2022-07-18 18:29:13 +01:00
dlhl60d.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
dps310.c	iio: pressure: dps310: Adjust Timeout Settings	2023-10-05 18:06:45 +01:00
hid-sensor-press.c	iio: pressure: hid-sensor: Convert to platform remove callback returning void	2023-09-23 15:06:56 +01:00
hp03.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
hp206c.c	iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards	2024-01-23 22:06:56 +00:00
hsc030pa_i2c.c	iio: pressure: hsc030pa add mandatory delay	2024-02-19 19:32:22 +00:00
hsc030pa_spi.c	iio: pressure: hsc030pa add mandatory delay	2024-02-19 19:32:22 +00:00
hsc030pa.c	iio: pressure: hsc030pa: use signed type to hold div_64() result	2024-02-19 19:32:22 +00:00
hsc030pa.h	iio: pressure: hsc030pa add mandatory delay	2024-02-19 19:32:22 +00:00
icp10100.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
Kconfig	iio: pressure: mprls0025pa add SPI driver	2024-01-23 22:06:54 +00:00
Makefile	iio: pressure: mprls0025pa add SPI driver	2024-01-23 22:06:54 +00:00
mpl115_i2c.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
mpl115_spi.c	iio: pressure: mpl115: Implementing low power mode by shutdown gpio	2022-11-23 19:44:00 +00:00
mpl115.c	iio: pressure: mpl115: Implementing low power mode by shutdown gpio	2022-11-23 19:44:00 +00:00
mpl115.h	iio: pressure: mpl115: Implementing low power mode by shutdown gpio	2022-11-23 19:44:00 +00:00
mpl3115.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
mprls0025pa_i2c.c	iio: pressure: mprls0025pa refactor to split core and i2c parts.	2024-01-23 22:06:54 +00:00
mprls0025pa_spi.c	iio: pressure: mprls0025pa add SPI driver	2024-01-23 22:06:54 +00:00
mprls0025pa.c	iio: pressure: mprls0025pa add triplet property	2024-01-23 22:06:54 +00:00
mprls0025pa.h	iio: pressure: mprls0025pa refactor to split core and i2c parts.	2024-01-23 22:06:54 +00:00
ms5611_core.c	iio: pressure: ms5611: ms5611_prom_is_valid false negative bug	2023-10-05 18:06:46 +01:00
ms5611_i2c.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ms5611_spi.c	iio: pressure: ms5611: Switch to fully devm_ managed registration.	2022-12-28 17:19:45 +00:00
ms5611.h	iio: pressure: ms5611: Switch to fully devm_ managed registration.	2022-12-28 17:19:45 +00:00
ms5637.c	iio: pressure: ms5637: Use i2c_get_match_data()	2023-09-12 10:42:04 +01:00
rohm-bm1390.c	iio: pressure: Support ROHM BU1390	2023-10-05 14:44:06 +01:00
st_pressure_buffer.c	iio:st-sensors: Remove duplicate MODULE_*	2022-02-18 11:36:54 +00:00
st_pressure_core.c	iio: pressure: st_pressure: Add support for LPS22DF	2022-09-21 18:42:53 +01:00
st_pressure_i2c.c	iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards	2024-01-23 22:06:56 +00:00
st_pressure_spi.c	iio: pressure: st_pressure: Add support for LPS22DF	2022-09-21 18:42:53 +01:00
st_pressure.h	iio: pressure: st_pressure: Add support for LPS22DF	2022-09-21 18:42:53 +01:00
t5403.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
zpa2326_i2c.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
zpa2326_spi.c	Char/Misc and other driver updates for 5.18-rc1	2022-03-28 12:27:35 -07:00
zpa2326.c	iio: Rename iio_trigger_poll_chained and add kernel-doc	2023-03-11 12:18:29 +00:00
zpa2326.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174	2019-05-30 11:26:41 -07:00