Fabien Poussin 6349c162b7 pinctrl: sunxi: d1: Add CAN bus pinmuxes ...

The D1 pin controller contains muxes for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the pin controller
is the same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221126191636.6673-1-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2022-11-26 22:57:50 +01:00

..

Kconfig

pinctrl: sunxi: Add driver for Allwinner D1

2022-07-18 11:39:33 +02:00

Makefile

pinctrl: sunxi: Add driver for Allwinner D1

2022-07-18 11:39:33 +02:00

pinctrl-sun4i-a10.c

pinctrl: sunxi: fix a typo when merging A20 support to A10 driver

2017-12-28 15:06:01 +01:00

pinctrl-sun5i.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun6i-a31-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun6i-a31.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-a23-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun8i-a23.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-a33.c

pinctrl: sunxi: change irq_bank_base to irq_bank_map

2018-03-27 15:07:49 +02:00

pinctrl-sun8i-a83t-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun8i-a83t.c

pinctrl: sunxi: a83t: Fix NAND function name for some pins

2022-06-15 15:19:57 +02:00

pinctrl-sun8i-h3-r.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-h3.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-v3s.c

pinctrl: sunxi: v3s: introduce support for V3

2019-08-05 12:35:29 +02:00

pinctrl-sun9i-a80-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun9i-a80.c

pinctrl: sunxi: Prepare for alternative bias voltage setting methods

2019-04-23 12:29:21 +02:00

pinctrl-sun20i-d1.c

pinctrl: sunxi: d1: Add CAN bus pinmuxes

2022-11-26 22:57:50 +01:00

pinctrl-sun50i-a64-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun50i-a64.c

pinctrl: sunxi: a64: Rename function ts0 to ts

2018-12-07 13:29:28 +01:00

pinctrl-sun50i-a100-r.c

pinctrl: sunxi: Fix name for A100 R_PIO

2022-08-26 10:37:24 +02:00

pinctrl-sun50i-a100.c

pinctrl: sunxi: Support the 2.5V I/O bias mode

2022-07-18 11:39:33 +02:00

pinctrl-sun50i-h5.c

pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper

2022-09-20 11:18:24 +02:00

pinctrl-sun50i-h6-r.c

pinctrl: sunxi: Add I/O bias setting for H6 R-PIO

2022-07-18 11:39:33 +02:00

pinctrl-sun50i-h6.c

pinctrl: sunxi: Support I/O bias voltage setting on H6

2019-04-23 12:31:42 +02:00

pinctrl-sun50i-h616-r.c

pinctrl: sunxi: Remove reset controller consumers

2022-06-15 15:54:37 +02:00

pinctrl-sun50i-h616.c

pinctrl: sunxi: Support the 2.5V I/O bias mode

2022-07-18 11:39:33 +02:00

pinctrl-suniv-f1c100s.c

pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin

2022-05-14 01:07:08 +02:00

pinctrl-sunxi.c

pinctrl: sunxi: Add missing header(s)

2022-10-24 17:06:47 +03:00

pinctrl-sunxi.h

pinctrl: sunxi: Add driver for Allwinner D1

2022-07-18 11:39:33 +02:00