Redstone1024/Fursuit-CylinderFan
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 6 Wiki Activity

docs(*): add some description of the DC variant

Browse Source
This commit is contained in:
Redstone1024 2024-05-31 20:19:00 +08:00
parent d9c27b8165
commit dfe5972e05
2 changed files with 20 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
BOM.csv
View File

@ -17,6 +17,7 @@ Electronics,2,5819,Schottky Diode,SOD-123,D4 D5,C64885,0.090075,0.18015,"Used to
Electronics,1,TYPE-C-16P-FH,Type-C Connector,SMD,J1,C709357,0.537857,0.537857,Detailed models refer to drawings.
Electronics,1,2 Pin,XH Pin Header,PTH,JP1,C5341201,0.10188,0.10188,Detailed models refer to drawings.
Electronics,1,4 Pin,2510 Pin Header,PTH,JP3,Taobao,0.08,0.08,https://m.tb.cn/h.5xQs6Mhxx7MnwSl?tk=3AZoWoS7zzc
Electronics,0,2 Pin,DC005-5.5X2.5,PTH,JP4,Taobao,0.07,0,https://m.tb.cn/h.ge11YE1cVjtWLr9?tk=rYvOWDYYVi4
Electronics,1,5.6uH,Buck-Boost Inductor,12XX,L1,C408522,4.49,4.49,
Electronics,1,Green,Chip LED,0603,LED1,C84267,0.096338,0.096338,Greater than 65W Indicator (This is almost impossible to happen).
Electronics,1,Red,Chip LED,0603,LED2,C84263,0.059304,0.059304,Battery charging indicator.
@ -45,7 +46,7 @@ Electronics,1,RV097NS R1S1 10kOhm,Potentiometer,PTH,VR1,Taobao,0.9,0.9,https://m
Electronics,0,5000mAH,Li-ion Battery,21700,Battery,Taobao,16.9,0,
Electronics,0,2 Pin,XH Pin,Wiring,JP1,Taobao,0.02,0,https://m.tb.cn/h.5xA4rsZ7O6otBoX?tk=l3hIWoSk1EH
Module,0,3S 12.6V,Li-ion Battery Protection Module,Wiring,JP1,Taobao,6.33,0,https://m.tb.cn/h.5xAeXbW3B9YVp9a?tk=P89VWoSj9sX
Module,1,3S 12.6V,Li-ion battery level indicator Module,Wiring,JP2,Taobao,6.5,6.5,https://m.tb.cn/h.5C8AmuhibY3OzK3?tk=SOJpWoS8mzm
Module,1,3S 12.6V,Li-ion Battery Level Indicator Module,Wiring,JP2,Taobao,6.5,6.5,https://m.tb.cn/h.5C8AmuhibY3OzK3?tk=SOJpWoS8mzm
Module,1,3S 12.6V XH2.54 Female No. 2 Wire Sequence,Lithium Battery Pack,Wiring,JP1,Taobao,79,79,https://m.tb.cn/h.5ArwGGE8BjNeA4H?tk=7LZaWqBgcbV
Module,1,12V 1.65A,Toggle Switch,Wiring,JP2,Taobao,0.104,0.104,https://m.tb.cn/h.gb9f84NBrwxm58f?tk=FT8TWsMOmpE
Wire,450,AWG24,Silicone Soft Wire,-,-,Taobao,0.00064,0.288,

1 Category Qty Value Device Package Parts JLC Number Cost (RMB) Total (RMB) Notes
17 Electronics 1 TYPE-C-16P-FH Type-C Connector SMD J1 C709357 0.537857 0.537857 Detailed models refer to drawings.
18 Electronics 1 2 Pin XH Pin Header PTH JP1 C5341201 0.10188 0.10188 Detailed models refer to drawings.
19 Electronics 1 4 Pin 2510 Pin Header PTH JP3 Taobao 0.08 0.08 https://m.tb.cn/h.5xQs6Mhxx7MnwSl?tk=3AZoWoS7zzc
20 Electronics 0 2 Pin DC005-5.5X2.5 PTH JP4 Taobao 0.07 0 https://m.tb.cn/h.ge11YE1cVjtWLr9?tk=rYvOWDYYVi4
21 Electronics 1 5.6uH Buck-Boost Inductor 12XX L1 C408522 4.49 4.49
22 Electronics 1 Green Chip LED 0603 LED1 C84267 0.096338 0.096338 Greater than 65W Indicator (This is almost impossible to happen).
23 Electronics 1 Red Chip LED 0603 LED2 C84263 0.059304 0.059304 Battery charging indicator.
46 Electronics 0 5000mAH Li-ion Battery 21700 Battery Taobao 16.9 0
47 Electronics 0 2 Pin XH Pin Wiring JP1 Taobao 0.02 0 https://m.tb.cn/h.5xA4rsZ7O6otBoX?tk=l3hIWoSk1EH
48 Module 0 3S 12.6V Li-ion Battery Protection Module Wiring JP1 Taobao 6.33 0 https://m.tb.cn/h.5xAeXbW3B9YVp9a?tk=P89VWoSj9sX
49 Module 1 3S 12.6V Li-ion battery level indicator Module Li-ion Battery Level Indicator Module Wiring JP2 Taobao 6.5 6.5 https://m.tb.cn/h.5C8AmuhibY3OzK3?tk=SOJpWoS8mzm
50 Module 1 3S 12.6V XH2.54 Female No. 2 Wire Sequence Lithium Battery Pack Wiring JP1 Taobao 79 79 https://m.tb.cn/h.5ArwGGE8BjNeA4H?tk=7LZaWqBgcbV
51 Module 1 12V 1.65A Toggle Switch Wiring JP2 Taobao 0.104 0.104 https://m.tb.cn/h.gb9f84NBrwxm58f?tk=FT8TWsMOmpE
52 Wire 450 AWG24 Silicone Soft Wire - - Taobao 0.00064 0.288

22
README.md
View File

@ -4,6 +4,8 @@ A Simple Rechargeable Cylinder Fan for Fursuit Heads
## Installation
> **Note**: The BOM.csv is based on the Type-C with finished battery variant, if you choose another variant please read below first.
### PCB
First, solder the components to the PCB, you can refer to the method provided in the [Link](https://www.myredstone.top/archives/5215).
@ -11,9 +13,11 @@ First, solder the components to the PCB, you can refer to the method provided in
The non-silkscreened 0Ohm resistor next to U3 is used to configure the fan PWM positive and negative.
For DV05028B12U, use the 0Ohm resistor to connect pad closest to **inside** PCB (positive PWM).
The JP2 connector is used to connect the battery level indicator module, so **don't** solder XH2.54-2P.
The JP2 connector is used to connect the battery level indicator module, so **don't** solder PZ2.54-2X2P.
You can refer to the following procedure to verify that the PCB is working, and reproduce the soldering of J1 or U1 if there is an abnormality.
If you choose the DC version, you only need to solder C21 C22 JP1 JP3 JP4 R23 R24 R25 R26 U2 U3 VR1.
If you choose the Type-C version, You can refer to the following procedure to verify that the PCB is working, and refer FAQ if there is an abnormality.
> **Note**: No abnormally high temperatures in the IC and other components throughout the process.
@ -52,7 +56,9 @@ You can refer to the following procedure to verify that the PCB is working, and
**CylinderFan-Nozzle-\*.stl** - Add support to the outer circle below. Pause the print and add the magnet while the magnet hole closes the layer.
**CylinderFan-Electronic-Body.stl** - Print the LED translucent faces with a white filament. Add support to bottom slide.
**CylinderFan-Electronic-Body-\*.stl** - Select one of the DC and Type-C versions to print.
**CylinderFan-Electronic-Body-Type-C.stl** - Print the LED translucent faces with a white filament. Add support to bottom slide.
**CylinderFan-Electronic-KnobRing.stl** - Print with TPU and controlle damping through fuzzy skin.
@ -60,7 +66,15 @@ You can refer to the following procedure to verify that the PCB is working, and
### Assembly
Just assemble according to CAD drawings.
A total of three to five AWG24 wires are required:
- **Red** - Connect pin 1 of the toggle switch to pin 4 of PCB JP2.
- **Yellow** - Connect pin 2 of the toggle switch to pin 3 of PCB JP2 and the positive of the Li-ion battery level indicator module.
- **Black** - Connect pin 3 of the toggle switch to pin 2 of PCB JP2 and the negative of the Li-ion battery level indicator module.
Be careful to route these wires through CylinderFan-Electronic-KnobTop.stl and CylinderFan-Electronic-Potentiometer.stl and not to impede the rotation of the structure.
The other parts are simply assembled according to the CAD drawings.
Be careful **NOT** to allow parts to run over, wrap around, or rub the wires.